summaryrefslogtreecommitdiffstats
path: root/net/tipc/name_table.c
Commit message (Collapse)AuthorAgeFilesLines
* tipc: fix a potential deadlock when nametable is purgedYing Xue2015-03-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ 28.531768] ============================================= [ 28.532322] [ INFO: possible recursive locking detected ] [ 28.532322] 3.19.0+ #194 Not tainted [ 28.532322] --------------------------------------------- [ 28.532322] insmod/583 is trying to acquire lock: [ 28.532322] (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [ 28.532322] but task is already holding lock: [ 28.532322] (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc] [ 28.532322] [ 28.532322] other info that might help us debug this: [ 28.532322] Possible unsafe locking scenario: [ 28.532322] [ 28.532322] CPU0 [ 28.532322] ---- [ 28.532322] lock(&(&nseq->lock)->rlock); [ 28.532322] lock(&(&nseq->lock)->rlock); [ 28.532322] [ 28.532322] *** DEADLOCK *** [ 28.532322] [ 28.532322] May be due to missing lock nesting notation [ 28.532322] [ 28.532322] 3 locks held by insmod/583: [ 28.532322] #0: (net_mutex){+.+.+.}, at: [<ffffffff8163e30f>] register_pernet_subsys+0x1f/0x50 [ 28.532322] #1: (&(&tn->nametbl_lock)->rlock){+.....}, at: [<ffffffffa000e091>] tipc_nametbl_stop+0xb1/0x1f0 [tipc] [ 28.532322] #2: (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc] [ 28.532322] [ 28.532322] stack backtrace: [ 28.532322] CPU: 1 PID: 583 Comm: insmod Not tainted 3.19.0+ #194 [ 28.532322] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.532322] ffffffff82394460 ffff8800144cb928 ffffffff81792f3e 0000000000000007 [ 28.532322] ffffffff82394460 ffff8800144cba28 ffffffff810a8080 ffff8800144cb998 [ 28.532322] ffffffff810a4df3 ffff880013e9cb10 ffffffff82b0d330 ffff880013e9cb38 [ 28.532322] Call Trace: [ 28.532322] [<ffffffff81792f3e>] dump_stack+0x4c/0x65 [ 28.532322] [<ffffffff810a8080>] __lock_acquire+0x740/0x1ca0 [ 28.532322] [<ffffffff810a4df3>] ? __bfs+0x23/0x270 [ 28.532322] [<ffffffff810a7506>] ? check_irq_usage+0x96/0xe0 [ 28.532322] [<ffffffff810a8a73>] ? __lock_acquire+0x1133/0x1ca0 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffffa000e11e>] tipc_nametbl_stop+0x13e/0x1f0 [tipc] [ 28.532322] [<ffffffffa000dfe5>] ? tipc_nametbl_stop+0x5/0x1f0 [tipc] [ 28.532322] [<ffffffffa0004bab>] tipc_init_net+0x13b/0x150 [tipc] [ 28.532322] [<ffffffffa0004a75>] ? tipc_init_net+0x5/0x150 [tipc] [ 28.532322] [<ffffffff8163dece>] ops_init+0x4e/0x150 [ 28.532322] [<ffffffff810aa66d>] ? trace_hardirqs_on+0xd/0x10 [ 28.532322] [<ffffffff8163e1d3>] register_pernet_operations+0xf3/0x190 [ 28.532322] [<ffffffff8163e31e>] register_pernet_subsys+0x2e/0x50 [ 28.532322] [<ffffffffa002406a>] tipc_init+0x6a/0x1000 [tipc] [ 28.532322] [<ffffffffa0024000>] ? 0xffffffffa0024000 [ 28.532322] [<ffffffff810002d9>] do_one_initcall+0x89/0x1c0 [ 28.532322] [<ffffffff811b7cb0>] ? kmem_cache_alloc_trace+0x50/0x1b0 [ 28.532322] [<ffffffff810e725b>] ? do_init_module+0x2b/0x200 [ 28.532322] [<ffffffff810e7294>] do_init_module+0x64/0x200 [ 28.532322] [<ffffffff810e9353>] load_module+0x12f3/0x18e0 [ 28.532322] [<ffffffff810e5890>] ? show_initstate+0x50/0x50 [ 28.532322] [<ffffffff810e9a19>] SyS_init_module+0xd9/0x110 [ 28.532322] [<ffffffff8179f3b3>] sysenter_dispatch+0x7/0x1f Before tipc_purge_publications() calls tipc_nametbl_remove_publ() to remove a publication with a name sequence, the name sequence's lock is held. However, when tipc_nametbl_remove_publ() calling tipc_nameseq_remove_publ() to remove the publication, it first tries to query name sequence instance with the publication, and then holds the lock of the found name sequence. But as the lock may be already taken in tipc_purge_publications(), deadlock happens like above scenario demonstrated. As tipc_nameseq_remove_publ() doesn't grab name sequence's lock, the deadlock can be avoided if it's directly invoked by tipc_purge_publications(). Fixes: 97ede29e80ee ("tipc: convert name table read-write lock to RCU") Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: nl compat add noop and remove legacy nl frameworkRichard Alpe2015-02-091-1/+3
| | | | | | | | | | | | | Add TIPC_CMD_NOOP to compat layer and remove the old framework. All legacy nl commands are now converted to the compat layer in netlink_compat.c. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl name table dump to nl compatRichard Alpe2015-02-091-184/+0
| | | | | | | | | | | Add functionality for printing a dump header and convert TIPC_CMD_SHOW_NAME_TABLE to compat dumpit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: move and rename the legacy nl api to "nl compat"Richard Alpe2015-02-091-1/+1
| | | | | | | | | | | | | The new netlink API is no longer "v2" but rather the standard API and the legacy API is now "nl compat". We split them into separate start/stop and put them in different files in order to further distinguish them. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: simplify socket multicast receptionJon Paul Maloy2015-02-051-3/+41
| | | | | | | | | | | | | | | | | | | The structure 'tipc_port_list' is used to collect port numbers representing multicast destination socket on a receiving node. The list is not based on a standard linked list, and is in reality optimized for the uncommon case that there are more than one multicast destinations per node. This makes the list handling unecessarily complex, and as a consequence, even the socket multicast reception becomes more complex. In this commit, we replace 'tipc_port_list' with a new 'struct tipc_plist', which is based on a standard list. We give the new list stack (push/pop) semantics, someting that simplifies the implementation of the function tipc_sk_mcast_rcv(). Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make tipc node address support net namespaceYing Xue2015-01-121-17/+22
| | | | | | | | | | | | | | If net namespace is supported in tipc, each namespace will be treated as a separate tipc node. Therefore, every namespace must own its private tipc node address. This means the "tipc_own_addr" global variable of node address must be moved to tipc_net structure to satisfy the requirement. It's turned out that users also can assign node address for every namespace. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: name tipc name table support net namespaceYing Xue2015-01-121-56/+72
| | | | | | | | | | | | | | | | | | TIPC name table is used to store the mapping relationship between TIPC service name and socket port ID. When tipc supports namespace, it allows users to publish service names only owned by a certain namespace. Therefore, every namespace must have its private name table to prevent service names published to one namespace from being contaminated by other service names in another namespace. Therefore, The name table global variable (ie, nametbl) and its lock must be moved to tipc_net structure, and a parameter of namespace must be added for necessary functions so that they can obtain name table variable defined in tipc_net structure. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make tipc broadcast link support net namespaceYing Xue2015-01-121-0/+1
| | | | | | | | | | | | | | TIPC broadcast link is statically established and its relevant states are maintained with the global variables: "bcbearer", "bclink" and "bcl". Allowing different namespace to own different broadcast link instances, these variables must be moved to tipc_net structure and broadcast link instances would be allocated and initialized when namespace is created. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make tipc node table aware of net namespaceYing Xue2015-01-121-7/+9
| | | | | | | | | | | | | | | | | | | | | | | Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: avoid double lock 'spin_lock:&seq->lock'Ying Xue2014-12-091-1/+1
| | | | | | | | | | | The commit fb9962f3cefe ("tipc: ensure all name sequences are properly protected with its lock") involves below errors: net/tipc/name_table.c:980 tipc_purge_publications() error: double lock 'spin_lock:&seq->lock' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert name table read-write lock to RCUYing Xue2014-12-081-44/+43
| | | | | | | | | | | | Convert tipc name table read-write lock to RCU. After this change, a new spin lock is used to protect name table on write side while RCU is applied on read side. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove unnecessary INIT_LIST_HEADYing Xue2014-12-081-2/+0
| | | | | | | | | | | When a list_head variable is seen as a new entry to be added to a list head, it's unnecessary to be initialized with INIT_LIST_HEAD(). Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: simplify relationship between name table lock and node lockYing Xue2014-12-081-9/+10
| | | | | | | | | | | | | | | | | | When tipc name sequence is published, name table lock is released before name sequence buffer is delivered to remote nodes through its underlying unicast links. However, when name sequence is withdrawn, the name table lock is held until the transmission of the removal message of name sequence is finished. During the process, node lock is nested in name table lock. To prevent node lock from being nested in name table lock, while withdrawing name, we should adopt the same locking policy of publishing name sequence: name table lock should be released before message is sent. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: any name table member must be protected under name table lockYing Xue2014-12-081-1/+2
| | | | | | | | | | | | | | As tipc_nametbl_lock is used to protect name_table structure, the lock must be held while all members of name_table structure are accessed. However, the lock is not obtained while a member of name_table structure - local_publ_count is read in tipc_nametbl_publish(), as a consequence, an inconsistent value of local_publ_count might be got. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: ensure all name sequences are properly protected with its lockYing Xue2014-12-081-21/+27
| | | | | | | | | | | | | | | | | | TIPC internally created a name table which is used to store name sequences. Now there is a read-write lock - tipc_nametbl_lock to protect the table, and each name sequence saved in the table is protected with its private lock. When a name sequence is inserted or removed to or from the table, its members might need to change. Therefore, in normal case, the two locks must be held while TIPC operates the table. However, there are still several places where we only hold tipc_nametbl_lock without proprerly obtaining name sequence lock, which might cause the corruption of name sequence. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: ensure all name sequences are released when name table is stoppedYing Xue2014-12-081-4/+3
| | | | | | | | | | | | | | As TIPC subscriber server is terminated before name table, no user depends on subscription list of name sequence when name table is stopped. Therefore, all name sequences stored in name table should be released whatever their subscriptions lists are empty or not, otherwise, memory leak might happen. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make name table allocated dynamicallyYing Xue2014-12-081-30/+30
| | | | | | | | | | | | | Name table locking policy is going to be adjusted from read-write lock protection to RCU lock protection in the future commits. But its essential precondition is to convert the allocation way of name table from static to dynamic mode. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove node subscription infrastructureYing Xue2014-11-261-1/+1
| | | | | | | | | | | | | | | The node subscribe infrastructure represents a virtual base class, so its users, such as struct tipc_port and struct publication, can derive its implemented functionalities. However, after the removal of struct tipc_port, struct publication is left as its only single user now. So defining an abstract infrastructure for one user becomes no longer reasonable. If corresponding new functions associated with the infrastructure are moved to name_table.c file, the node subscription infrastructure can be removed as well. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix sparse warnings in new nl apiRichard Alpe2014-11-241-6/+7
| | | | | | | | Fix sparse warnings about non-static declaration of static functions in the new tipc netlink API. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: add name table dump to new netlink apiRichard Alpe2014-11-211-1/+189
| | | | | | | | | | | | | | | | | | | | | | | Add TIPC_NL_NAME_TABLE_GET command to the new tipc netlink API. This command supports dumping the name table of all nodes. Netlink logical layout of name table response message: -> name table -> publication -> type -> lower -> upper -> scope -> node -> ref -> key Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: add name distributor resiliency queueErik Hugne2014-09-011-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIPC name table updates are distributed asynchronously in a cluster, entailing a risk of certain race conditions. E.g., if two nodes simultaneously issue conflicting (overlapping) publications, this may not be detected until both publications have reached a third node, in which case one of the publications will be silently dropped on that node. Hence, we end up with an inconsistent name table. In most cases this conflict is just a temporary race, e.g., one node is issuing a publication under the assumption that a previous, conflicting, publication has already been withdrawn by the other node. However, because of the (rtt related) distributed update delay, this may not yet hold true on all nodes. The symptom of this failure is a syslog message: "tipc: Cannot publish {%u,%u,%u}, overlap error". In this commit we add a resiliency queue at the receiving end of the name table distributor. When insertion of an arriving publication fails, we retain it in this queue for a short amount of time, assuming that another update will arrive very soon and clear the conflict. If so happens, we insert the publication, otherwise we drop it. The (configurable) retention value defaults to 2000 ms. Knowing from experience that the situation described above is extremely rare, there is no risk that the queue will accumulate any large number of items. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove include file port.hJon Paul Maloy2014-08-231-1/+0
| | | | | | | | | | | | | | We move the inline functions in the file port.h to socket.c, and modify their names accordingly. We move struct tipc_port and some macros to socket.h. Finally, we remove the file port.h. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix memory leak of publicationsYing Xue2014-04-301-1/+1
| | | | | | | | | | | | | Commit 1bb8dce57f4d15233688c68990852a10eb1cd79f ("tipc: fix memory leak during module removal") introduced a memory leak issue: when name table is stopped, it's forgotten that publication instances are freed properly. Additionally the useless "continue" statement in tipc_nametbl_stop() is removed as well. Reported-by: Jason <huzhijiang@gmail.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: move the delivery of named messages out of nametbl lockYing Xue2014-04-281-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | Commit a89778d8baf19cd7e728d81121a294a06cedaad1 ("tipc: add support for link state subscriptions") introduced below possible deadlock scenario: CPU0 CPU1 T0: tipc_publish() link_timeout() T1: tipc_nametbl_publish() [grab node lock]* T2: [grab nametbl write lock]* link_state_event() T3: named_cluster_distribute() link_activate() T4: [grab node lock]* tipc_node_link_up() T5: tipc_nametbl_publish() T6: [grab nametble write lock]* The opposite order of holding nametbl write lock and node lock on above two different paths may result in a deadlock. If we move the the delivery of named messages via link out of name nametbl lock, the reverse order of holding locks will be eliminated, as a result, the deadlock will be killed as well. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix memory leak during module removalErik Hugne2014-03-061-3/+34
| | | | | | | | | | | | | | | | | | | | When the TIPC module is removed, the tasklet handler is disabled before all other subsystems. This will cause lingering publications in the name table because the node_down tasklets responsible to clean up publications from an unreachable node will never run. When the name table is shut down, these publications are detected and an error message is logged: tipc: nametbl_stop(): orphaned hash chain detected This is actually a memory leak, introduced with commit 993b858e37b3120ee76d9957a901cca22312ffaa ("tipc: correct the order of stopping services at rmmod") Instead of just logging an error and leaking memory, we free the orphaned entries during nametable shutdown. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove all enabled flags from all tipc componentsYing Xue2014-02-221-3/+0
| | | | | | | | | | | | | | | | | | | | | | | When tipc module is inserted, many tipc components are initialized one by one. During the initialization period, if one of them is failed, tipc_core_stop() will be called to stop all components whatever corresponding components are created or not. To avoid to release uncreated ones, relevant components have to add necessary enabled flags indicating whether they are created or not. But in the initialization stage, if one component is unsuccessfully created, we will just destroy successfully created components before the failed component instead of all components. All enabled flags defined in components, in turn, become redundant. Additionally it's also unnecessary to identify whether table.types is NULL in tipc_nametbl_stop() because name stable has been definitely created successfully when tipc_nametbl_stop() is called. Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove unnecessary variables and conditionswangweidong2013-12-161-2/+1
| | | | | | | | | | | We remove a number of unnecessary variables and branches in TIPC. This patch is cosmetic and does not change the operation of TIPC in any way. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: cosmetic realignment of function argumentsPaul Gortmaker2013-06-171-5/+5
| | | | | | | | | No runtime code changes here. Just a realign of the function arguments to start where the 1st one was, and fit as many args as can be put in an 80 char line. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hlist: drop the node parameter from iteratorsSasha Levin2013-02-271-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* net/tipc/name_table.c: Remove unecessary semicolonPeter Senna Tschudin2012-09-181-1/+1
| | | | | | | Found by http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: eliminate configuration for maximum number of name publicationsYing Xue2012-08-201-2/+2
| | | | | | | | | | | Gets rid of the need for users to specify the maximum number of name publications supported by TIPC. TIPC now automatically provides support for the maximum number of name publications to 65535. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert tipc_nametbl_size type from variable to macroYing Xue2012-08-201-5/+5
| | | | | | | | | | There is nothing changing this variable dynamically, so change it to a macro to make that more obvious when reading the code. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: phase out most of the struct print_buf usageErik Hugne2012-07-131-37/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: use standard printk shortcut macros (pr_err etc.)Erik Hugne2012-07-131-20/+20
| | | | | | | | | | | | | | | | | | | | All messages should go directly to the kernel log. The TIPC specific error, warning, info and debug trace macro's are removed and all references replaced with pr_err, pr_warn, pr_info and pr_debug. Commonly used sub-strings are explicitly declared as a const char to reduce .text size. Note that this means the debug messages (changed to pr_debug), are now enabled through dynamic debugging, instead of a TIPC specific Kconfig option (TIPC_DEBUG). The latter will be phased out completely Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> [PG: use pr_fmt as suggested by Joe Perches <joe@perches.com>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: limit error messages relating to memory leak to one linePaul Gortmaker2012-07-121-2/+4
| | | | | | | | | | | | | With the default name table size of 1024, it is possible that the sanity check in tipc_nametbl_stop could spam out 1024 essentially identical error messages if memory was corrupted or similar. Limit it to issuing no more than a single message. The actual chain number (i.e. 0 --> 1023) wouldn't provide any useful insight if/when such an instance happened, so don't bother printing out that value. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings2012-07-101-5/+5
| | | | | | | | Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: compress out gratuitous extra carriage returnsPaul Gortmaker2012-04-301-44/+6
| | | | | | | | | | | | | | | Some of the comment blocks are floating in limbo between two functions, or between blocks of code. Delete the extra line feeds between any comment and its associated following block of code, to be consistent with the majority of the rest of the kernel. Also delete trailing newlines at EOF and fix a couple trivial typos in existing comments. This is a 100% cosmetic change with no runtime impact. We get rid of over 500 lines of non-code, and being blank line deletes, they won't even show up as noise in git blame. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Enhance error checking of published namesAllan Stephens2012-04-261-3/+4
| | | | | | | | | | | | | | | | Consolidates validation of scope and name sequence range values into a single routine where it applies both to local name publications and to name publications issued by other nodes in the network. This change means that the scope value for non-local publications is now validated and the name sequence range for local publications is now validated only once. Additionally, a publication attempt that fails validation now creates an entry in the system log file only if debugging capabilities have been enabled; this prevents the system log from being cluttered up with messages caused by a defective application or network node. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Create helper routine to delete unused name sequence structureAllan Stephens2012-04-261-12/+15
| | | | | | | | | | | Replaces two identical chunks of code that delete an unused name sequence structure from TIPC's name table with calls to a new routine that performs this operation. This change is cosmetic and doesn't impact the operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Ensure network address change doesn't impact name table updatesAllan Stephens2012-04-191-4/+4
| | | | | | | | | | | Revises routines that add and remove an entry from a node's name table so that the publication scope lists are updated properly even if the node's network address is changed in mid-operation. The routines now recognize the default node address of <0.0.0> as an alias for "this node" even after a new network address has been assigned. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Add routines for safe checking of node's network addressAllan Stephens2012-04-191-3/+3
| | | | | | | | | | | | | | | | | Introduces routines that test whether a given network address is equal to a node's own network address or if it lies within the node's own network cluster, and which work properly regardless of whether the node is using the default network address <0.0.0> or a non-zero network address that is assigned later on. In essence, these routines ensure that address <0.0.0> is treated as an alias for "this node", regardless of which network address the node is actually using. Old users of the pre-existing more strict match in_own_cluster() have been accordingly redirected to what is now called in_own_cluster_exact() --- which does not extend matching to <0,0,0>. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Don't record failed publication attempt as a successAllan Stephens2012-04-191-2/+3
| | | | | | | | | | No longer increments counter of number of publications by a node if an attempt to add a new publication fails. This prevents TIPC from incorrectly blocking future publications because the configured maximum number of publications has been reached. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Update node-scope publications when network address is assignedAllan Stephens2012-04-191-3/+2
| | | | | | | | | | | | | | | | | Ensures that node-scope name publications that exist prior to the configuration of a node's network address are properly re-initialized with that address when it is assigned. TIPC's node-scope publications are now tracked using a publications list like the lists used for cluster-scope and zone-scope publications so they can be easily updated when required. The inclusion of node scope name publications in a conventional publication list means that they must now also be withdrawn, just like cluster and zone scope publications are currently withdrawn. So some conditional tests on scope ==/!= TIPC_NODE_SCOPE are inserted/removed accordingly. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Revert name table translation optimizationAllan Stephens2012-02-241-4/+13
| | | | | | | | | | | | | | | | Restores name table translation using a non-zero domain that is "out of scope", which was broken by an earlier commit (5d9c54c1e9ececcf7e99c4f014f9bec7ee3a7def). Comments have now been added to the name table translation routine to make it clear that there are actually three possible outcomes to a translation request (found/not found/deferred), rather than just two (found/not found). Note that a straightforward revert of the earlier commit is not possible, as other changes to the name table translation logic have occurred since the incorrect optimization was made. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Add check to prevent insertion of duplicate name table entriesAllan Stephens2012-02-241-0/+7
| | | | | | | | | | | Adds a new check to TIPC's name table logic to reject any attempt to create a new name publication that is identical to an existing one. (Such an attempt will never happen under normal circumstances, but could arise if another network node malfunctions and issues a duplicate name publication message.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Simplify enforcement of reserved name type prohibitionAllan Stephens2012-02-241-23/+1
| | | | | | | | | | | | Streamlines the logic that prevents an application from binding a reserved TIPC name type to a port by moving the check to the code that handles a socket bind() operation. This allows internal TIPC subsystems to bind a reserved name without having to set an atomic flag to gain permission to use such a name. (This simplification is now possible due to the elimination of support for TIPC's native API.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: rename struct subscription to struct tipc_subscriptionPaul Gortmaker2011-12-291-6/+7
| | | | | | | | Make this rename so that it is consistent with the majority of the other tipc structs and to assist in removing any ambiguity with other similar names in other subsystems. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: rename struct port_list to struct tipc_port_listPaul Gortmaker2011-12-291-1/+1
| | | | | | | | Make this rename so that it is consistent with the majority of the other tipc structs and to assist in removing any ambiguity with other similar names in other subsystems. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Eliminate checks for empty zone list during name translationAllan Stephens2011-06-241-5/+2
| | | | | | | | | | Gets rid of a pair of checks to see if a name sequence entry in TIPC's name table has an empty zone list. These checks are pointless since the zone list can never be empty (i.e. as soon as the list becomes empty the associated name sequence entry is deleted). Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Convert name table publication lists to standard kernel listsAllan Stephens2011-06-241-157/+83
| | | | | | | | | | | | | Modifies the main circular linked lists of publications used in TIPC's name table to use the standard kernel linked list type. This change simplifies the deletion of an existing publication by eliminating the need to search up to three lists to locate the publication. The use of standard list routines also helps improve the readability of the name table code by make it clearer what each list operation being performed is actually doing. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
OpenPOWER on IntegriCloud