summaryrefslogtreecommitdiffstats
path: root/net/sctp
Commit message (Collapse)AuthorAgeFilesLines
* net: sctp: sctp_transport_destroy{, _rcu}: fix potential pointer corruptionDaniel Borkmann2013-08-121-2/+2
| | | | | | | | | | | | | | | | | Probably this one is quite unlikely to be triggered, but it's more safe to do the call_rcu() at the end after we have dropped the reference on the asoc and freed sctp packet chunks. The reason why is because in sctp_transport_destroy_rcu() the transport is being kfree()'d, and if we're unlucky enough we could run into corrupted pointers. Probably that's more of theoretical nature, but it's safer to have this simple fix. Introduced by commit 8c98653f ("sctp: sctp_close: fix release of bindings for deferred call_rcu's"). I also did the 8c98653f regression test and it's fine that way. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: sctp_assoc_control_transport: fix MTU size in SCTP_PF stateDaniel Borkmann2013-08-121-2/+2
| | | | | | | | | | | | | | The SCTP Quick failover draft [1] section 5.1, point 5 says that the cwnd should be 1 MTU. So, instead of 1, set it to 1 MTU. [1] https://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05 Reported-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: confirm route during forward progressDaniel Borkmann2013-07-092-0/+15
| | | | | | | | | | | | | | | | | | | | | This fix has been proposed originally by Vlad Yasevich. He says: When SCTP makes forward progress (receives a SACK that acks new chunks, renegs, or answeres 0-window probes) or when HB-ACK arrives, mark the route as confirmed so we don't unnecessarily send NUD probes. Having a simple SCTP client/server that exchange data chunks every 1sec, without this patch ARP requests are sent periodically every 40-60sec. With this fix applied, an ARP request is only done once right at the "session" beginning. Also, when clearing the related ARP cache entry manually during the session, a new request is correctly done. I have only "backported" this to net-next and tested that it works, so full credit goes to Vlad. Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: use get_unused_fd_flags(0) instead of get_unused_fd()Yann Droneaud2013-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) can be "unsafe": O_CLOEXEC must be used by default to not leak file descriptor across exec(). Instead of macro get_unused_fd(), functions anon_inode_getfd() or get_unused_fd_flags() should be used with flags given by userspace. If not possible, flags should be set to O_CLOEXEC to provide userspace with a default safe behavor. In a further patch, get_unused_fd() will be removed so that new code start using anon_inode_getfd() or get_unused_fd_flags() with correct flags. This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. The hard coded flag value (0) should be reviewed on a per-subsystem basis, and, if possible, set to O_CLOEXEC. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: get rid of SCTP_DBG_TSNS entirelyDaniel Borkmann2013-07-022-114/+0
| | | | | | | | | | | | | | | | | | After having reworked the debugging framework, Neil and Vlad agreed to get rid of the leftover SCTP_DBG_TSNS code for a couple of reasons: We can use systemtap scripts to investigate these things, we now have pr_debug() helpers that make life easier, and if we really need anything else besides those tools, we will be forced to come up with something better than we have there. Therefore, get rid of this ifdef debugging code entirely for now. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: rework debugging framework to use pr_debug and friendsDaniel Borkmann2013-07-0116-409/+383
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should get rid of all own SCTP debug printk macros and use the ones that the kernel offers anyway instead. This makes the code more readable and conform to the kernel code, and offers all the features of dynamic debbuging that pr_debug() et al has, such as only turning on/off portions of debug messages at runtime through debugfs. The runtime cost of having CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing, is negligible [1]. If kernel debugging is completly turned off, then these statements will also compile into "empty" functions. While we're at it, we also need to change the Kconfig option as it /now/ only refers to the ifdef'ed code portions in outqueue.c that enable further debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code was enabled with this Kconfig option and has now been removed, we transform those code parts into WARNs resp. where appropriate BUG_ONs so that those bugs can be more easily detected as probably not many people have SCTP debugging permanently turned on. To turn on all SCTP debugging, the following steps are needed: # mount -t debugfs none /sys/kernel/debug # echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control This can be done more fine-grained on a per file, per line basis and others as described in [2]. [1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf [2] Documentation/dynamic-debug-howto.txt Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: simplify sctp_get_portDaniel Borkmann2013-06-251-4/+1
| | | | | | | | | No need to have an extra ret variable when we directly can return the value of sctp_get_port_local(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: decouple cleaning some socket data from endpointDaniel Borkmann2013-06-252-10/+25
| | | | | | | | | | | | | | | | | Rather instead of having the endpoint clean the garbage from the socket, use a sk_destruct handler sctp_destruct_sock(), that does the job for that when there are no more references on the socket. At least do this for our crypto transform through crypto_free_hash() that is allocated when in listening state. Also, perform sctp_put_port() only when sk is valid. At a later point in time we can still determine if there's an option of placing this into sk_prot->unhash() or sctp_endpoint_free() without any races. For now, leave it in sctp_endpoint_destroy() though. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: minor: sctp_seq_dump_local_addrs add missing newlineDaniel Borkmann2013-06-251-1/+1
| | | | | | | | A trailing newline has been forgotten to add into the WARN(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: migrate cookie life from timeval to ktimeDaniel Borkmann2013-06-253-29/+12
| | | | | | | | | | | | | | | | | | Currently, SCTP code defines its own timeval functions (since timeval is rarely used inside the kernel by others), namely tv_lt() and TIMEVAL_ADD() macros, that operate on SCTP cookie expiration. We might as well remove all those, and operate directly on ktime structures for a couple of reasons: ktime is available on all archs; complexity of ktime calculations depending on the arch is less than (reduces to a simple arithmetic operations on archs with BITS_PER_LONG == 64 or CONFIG_KTIME_SCALAR) or equal to timeval functions (other archs); code becomes more readable; macros can be thrown out. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Convert __list_for_each use to list_for_eachDave Jones2013-06-191-1/+1
| | | | | Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-06-192-4/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: fully initialize sctp_outq in sctp_outq_initNeil Horman2013-06-131-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 2f94aabd9f6c925d77aecb3ff020f1cc12ed8f86 (refactor sctp_outq_teardown to insure proper re-initalization) we modified sctp_outq_teardown to use sctp_outq_init to fully re-initalize the outq structure. Steve West recently asked me why I removed the q->error = 0 initalization from sctp_outq_teardown. I did so because I was operating under the impression that sctp_outq_init would properly initalize that value for us, but it doesn't. sctp_outq_init operates under the assumption that the outq struct is all 0's (as it is when called from sctp_association_init), but using it in __sctp_outq_teardown violates that assumption. We should do a memset in sctp_outq_init to ensure that the entire structure is in a known state there instead. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: "West, Steve (NSN - US/Fort Worth)" <steve.west@nsn.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: netdev@vger.kernel.org CC: davem@davemloft.net Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: fix NULL pointer dereference in socket destructionDaniel Borkmann2013-06-111-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While stress testing sctp sockets, I hit the following panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] PGD 7cead067 PUD 7ce76067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: sctp(F) libcrc32c(F) [...] CPU: 7 PID: 2950 Comm: acc Tainted: GF 3.10.0-rc2+ #1 Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011 task: ffff88007ce0e0c0 ti: ffff88007b568000 task.ti: ffff88007b568000 RIP: 0010:[<ffffffffa0490c4e>] [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP: 0018:ffff88007b569e08 EFLAGS: 00010292 RAX: 0000000000000000 RBX: ffff88007db78a00 RCX: dead000000200200 RDX: ffffffffa049fdb0 RSI: ffff8800379baf38 RDI: 0000000000000000 RBP: ffff88007b569e18 R08: ffff88007c230da0 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880077990d00 R14: 0000000000000084 R15: ffff88007db78a00 FS: 00007fc18ab61700(0000) GS:ffff88007fc60000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000007cf9d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007b569e38 ffff88007db78a00 ffff88007b569e38 ffffffffa049fded ffffffff81abf0c0 ffff88007db78a00 ffff88007b569e58 ffffffff8145b60e 0000000000000000 0000000000000000 ffff88007b569eb8 ffffffff814df36e Call Trace: [<ffffffffa049fded>] sctp_destroy_sock+0x3d/0x80 [sctp] [<ffffffff8145b60e>] sk_common_release+0x1e/0xf0 [<ffffffff814df36e>] inet_create+0x2ae/0x350 [<ffffffff81455a6f>] __sock_create+0x11f/0x240 [<ffffffff81455bf0>] sock_create+0x30/0x40 [<ffffffff8145696c>] SyS_socket+0x4c/0xc0 [<ffffffff815403be>] ? do_page_fault+0xe/0x10 [<ffffffff8153cb32>] ? page_fault+0x22/0x30 [<ffffffff81544e02>] system_call_fastpath+0x16/0x1b Code: 0c c9 c3 66 2e 0f 1f 84 00 00 00 00 00 e8 fb fe ff ff c9 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <48> 8b 47 20 48 89 fb c6 47 1c 01 c6 40 12 07 e8 9e 68 01 00 48 RIP [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP <ffff88007b569e08> CR2: 0000000000000020 ---[ end trace e0d71ec1108c1dd9 ]--- I did not hit this with the lksctp-tools functional tests, but with a small, multi-threaded test program, that heavily allocates, binds, listens and waits in accept on sctp sockets, and then randomly kills some of them (no need for an actual client in this case to hit this). Then, again, allocating, binding, etc, and then killing child processes. This panic then only occurs when ``echo 1 > /proc/sys/net/sctp/auth_enable'' is set. The cause for that is actually very simple: in sctp_endpoint_init() we enter the path of sctp_auth_init_hmacs(). There, we try to allocate our crypto transforms through crypto_alloc_hash(). In our scenario, it then can happen that crypto_alloc_hash() fails with -EINTR from crypto_larval_wait(), thus we bail out and release the socket via sk_common_release(), sctp_destroy_sock() and hit the NULL pointer dereference as soon as we try to access members in the endpoint during sctp_endpoint_free(), since endpoint at that time is still NULL. Now, if we have that case, we do not need to do any cleanup work and just leave the destruction handler. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: remove SCTP_STATIC macroDaniel Borkmann2013-06-178-65/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCTP_STATIC is just another define for the static keyword. It's use is inconsistent in the SCTP code anyway and it was introduced in the initial implementation of SCTP in 2.5. We have a regression suite in lksctp-tools, but this is for user space only, so noone makes use of this macro anymore. The kernel test suite for 2.5 is incompatible with the current SCTP code anyway. So simply Remove it, to be more consistent with the rest of the kernel code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: get rid of t_new macro for kzallocDaniel Borkmann2013-06-176-6/+7
| | | | | | | | | | | | | | | | | | | | t_new rather obfuscates things where everyone else is using actual function names instead of that macro, so replace it with kzalloc, which is the function t_new wraps. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: sctp_association_init: put refs in reverse orderDaniel Borkmann2013-06-141-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case we need to bail out for whatever reason during assoc init, we call sctp_endpoint_put() and then sock_put(), however, we've hold both refs in reverse, non-symmetric order, so first sctp_endpoint_hold() and then sock_hold(). Reverse this, so that in an error case we have sock_put() and then sctp_endpoint_put(). Actually shouldn't matter too much, since both cleanup paths do the right thing, but that way, it is more consistent with the rest of the code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: minor: remove variable in sctp_init_sockDaniel Borkmann2013-06-141-4/+2
| | | | | | | | | | | | | | | | | | | | | | It's only used at this one time, so we could remove it as well. This is valid and also makes it more explicit/obvious that in case of error the sp->ep is NULL here, i.e. for the sctp_destroy_sock() check that was recently added. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: sctp_sf_do_prm_asoc: do SCTP_CMD_INIT_CHOOSE_TRANSPORT firstDaniel Borkmann2013-06-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While this currently cannot trigger any NULL pointer dereference in sctp_seq_dump_local_addrs(), better change the order of commands to prevent a future bug to happen. Although we first add SCTP_CMD_NEW_ASOC and then set the SCTP_CMD_INIT_CHOOSE_TRANSPORT, it is okay for now, since this primitive is only called by sctp_connect() or sctp_sendmsg() with sctp_assoc_add_peer() set first. However, lets do this precaution and first set the transport and then add it to the association hashlist to prevent in future something to possibly triggering this. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sctp: sideeffect: throw BUG if primary_path is NULLDaniel Borkmann2013-06-142-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This clearly states a BUG somewhere in the SCTP code as e.g. fixed once in f28156335 ("sctp: Use correct sideffect command in duplicate cookie handling"). If this ever happens, throw a trace in the sideeffect engine where assocs clearly must have a primary_path assigned. When in sctp_seq_dump_local_addrs() also throw a WARN and bail out since we do not need to panic for printing this one asterisk. Also, it will avoid the not so obvious case when primary != NULL test passes and at a later point in time triggering a NULL ptr dereference caused by primary. While at it, also fix up the white space. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Convert uses of typedef ctl_table to struct ctl_tableJoe Perches2013-06-131-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the uses of this unnecessary typedef. Done via perl script: $ git grep --name-only -w ctl_table net | \ xargs perl -p -i -e '\ sub trim { my ($local) = @_; $local =~ s/(^\s+|\s+$)//g; return $local; } \ s/\b(?<!struct\s)ctl_table\b(\s*\*\s*|\s+\w+)/"struct ctl_table " . trim($1)/ge' Reflow the modified lines that now exceed 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Correct byte order of access to skb->{network, transport}_headerSimon Horman2013-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | Corrects an byte order conflict introduced by 158874cac61245b84e939c92c53db7000122b7b0 ("sctp: Correct access to skb->{network, transport}_header"). The values in question are host byte order. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Correct byte order of access to skb->{network, transport}_headerSimon Horman2013-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | Corrects an byte order conflict introduced by "sctp: Correct access to skb->{network, transport}_header". All the values in question are host byte order. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Correct access to skb->{network, transport}_headerSimon Horman2013-05-282-2/+2
|/ | | | | | | | | | This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case sk_buff_data_t will be a pointer, however, skb->{network,transport}_header is now __u16. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2013-05-0112-66/+39
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
| * net: sctp: attribute printl with __printf for gcc fmt checksDaniel Borkmann2013-05-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | Let GCC check for format string errors in sctp's probe printl function. This patch fixes the warning when compiled with W=1: net/sctp/probe.c:73:2: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: minor: remove dead code from sctp_packetDaniel Borkmann2013-04-221-4/+1
| | | | | | | | | | | | | | | | | | | | struct sctp_packet is currently embedded into sctp_transport or sits on the stack as 'singleton' in sctp_outq_flush(). Therefore, its member 'malloced' is always 0, thus a kfree() is never called. Because of that, we can just remove this code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: sctp_ulpq: remove 'malloced' struct memberDaniel Borkmann2013-04-171-3/+0
| | | | | | | | | | | | | | | | | | | | The structure sctp_ulpq is embedded into sctp_association and never separately allocated, also ulpq->malloced is always 0, so that kfree() is never called. Therefore, remove this code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: sctp_bind_addr: remove dead codeDaniel Borkmann2013-04-171-7/+0
| | | | | | | | | | | | | | | | | | | | | | The sctp_bind_addr structure has a 'malloced' member that is always set to 0, thus in sctp_bind_addr_free() the kfree() part can never be called. This part is embedded into sctp_ep_common anyway and never alloced. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: sctp_transport: remove unused variableDaniel Borkmann2013-04-171-1/+0
| | | | | | | | | | | | | | | | | | sctp_transport's member 'malloced' is set to 1, never evaluated and the structure is kfreed anyway. So just remove it. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: outqueue: simplify sctp_outq_uncork functionDaniel Borkmann2013-04-171-3/+2
| | | | | | | | | | | | | | | | | | Just a minor edit to simplify the function. No need for this error variable here. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: sctp_outq: remove 'malloced' from its structDaniel Borkmann2013-04-171-6/+0
| | | | | | | | | | | | | | | | | | | | sctp_outq is embedded into sctp_association, and thus never kmalloced in any way. Also, malloced is always 0, thus kfree() is never called. Therefore, remove that dead piece of code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: sctp_inq: remove dead codeDaniel Borkmann2013-04-171-7/+0
| | | | | | | | | | | | | | | | | | | | sctp_inq is never kmalloced, since it's integrated into sctp_ep_common and only initialized from eps and assocs. Therefore, remove the dead code from there. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: sctp_ssnmap: remove 'malloced' element from structDaniel Borkmann2013-04-171-11/+12
| | | | | | | | | | | | | | | | | | | | sctp_ssnmap_init() can only be called from sctp_ssnmap_new() where malloced is always set to 1. Thus, when we call sctp_ssnmap_free() the test for map->malloced evaluates always to true. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: Add buffer utilization fields to /proc/net/sctp/assocsDilip Daya2013-04-161-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sctp: Add buffer utilization fields to /proc/net/sctp/assocs This patch adds the following fields to /proc/net/sctp/assocs output: - sk->sk_wmem_alloc as "wmema" (transmit queue bytes committed) - sk->sk_wmem_queued as "wmemq" (persistent queue size) - sk->sk_sndbuf as "sndbuf" (size of send buffer in bytes) - sk->sk_rcvbuf as "rcvbuf" (size of receive buffer in bytes) When small DATA chunks containing 136 bytes data are sent the TX_QUEUE (assoc->sndbuf_used) reaches a maximum of 40.9% of sk_sndbuf value when peer.rwnd = 0. This was diagnosed from sk_wmem_alloc value reaching maximum value of sk_sndbuf. TX_QUEUE (assoc->sndbuf_used), sk_wmem_alloc and sk_wmem_queued values are incremented in sctp_set_owner_w() for outgoing data chunks. Having access to the above values in /proc/net/sctp/assocs will provide a better understanding of SCTP buffer management. With patch applied, example output when peer.rwnd = 0 where: ASSOC ffff880132298000 is sender ffff880125343000 is receiver ASSOC SOCK STY SST ST HBKT ASSOC-ID TX_QUEUE RX_QUEUE \ ffff880132298000 ffff880124a0a0c0 2 1 3 29325 1 214656 0 \ ffff880125343000 ffff8801237d7700 2 1 3 36210 2 0 524520 \ UID INODE LPORT RPORT LADDRS <-> RADDRS HBINT INS OUTS \ 0 25108 3455 3456 *10.4.8.3 <-> *10.5.8.3 7500 2 2 \ 0 27819 3456 3455 *10.5.8.3 <-> *10.4.8.3 7500 2 2 \ MAXRT T1X T2X RTXC wmema wmemq sndbuf rcvbuf 4 0 0 72 525633 440320 524288 524288 4 0 0 0 1 0 524288 524288 Signed-off-by: Dilip Daya <dilip.daya@hp.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: minor: make sctp_ep_common's member 'dead' a boolDaniel Borkmann2013-04-152-4/+4
| | | | | | | | | | | | | | | | | | Since dead only holds two states (0,1), make it a bool instead of a 'char', which is more appropriate for its purpose. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sctp: remove sctp_ep_common struct member 'malloced'Daniel Borkmann2013-04-152-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | There is actually no need to keep this member in the structure, because after init it's always 1 anyway, thus always kfree called. This seems to be an ancient leftover from the very initial implementation from 2.5 times. Only in case the initialization of an association fails, we leave base.malloced as 0, but we nevertheless kfree it in the error path in sctp_association_new(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: fix error return code in __sctp_connect()Wei Yongjun2013-04-071-2/+3
| | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: add option to enable error queue packets waking selectKeller, Jacob E2013-03-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, when a socket receives something on the error queue it only wakes up the socket on select if it is in the "read" list, that is the socket has something to read. It is useful also to wake the socket if it is in the error list, which would enable software to wait on error queue packets without waking up for regular data on the socket. The main use case is for receiving timestamped transmit packets which return the timestamp to the socket via the error queue. This enables an application to select on the socket for the error queue only instead of for the regular traffic. -v2- * Added the SO_SELECT_ERR_QUEUE socket option to every architechture specific file * Modified every socket poll function that checks error queue Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeffrey Kirsher <jeffrey.t.kirsher@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Matthew Vick <matthew.vick@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'for-linus' of ↵Linus Torvalds2013-04-301-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small code cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits) mm: Convert print_symbol to %pSR gfs2: Convert print_symbol to %pSR m32r: Convert print_symbol to %pSR iostats.txt: add easy-to-find description for field 6 x86 cmpxchg.h: fix wrong comment treewide: Fix typo in printk and comments doc: devicetree: Fix various typos docbook: fix 8250 naming in device-drivers pata_pdc2027x: Fix compiler warning treewide: Fix typo in printks mei: Fix comments in drivers/misc/mei treewide: Fix typos in kernel messages pm44xx: Fix comment for "CONFIG_CPU_IDLE" doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP" mmzone: correct "pags" to "pages" in comment. kernel-parameters: remove outdated 'noresidual' parameter Remove spurious _H suffixes from ifdef comments sound: Remove stray pluses from Kconfig file radio-shark: Fix printk "CONFIG_LED_CLASS" doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE ...
| * | net: sctp: remove cast for kmalloc/kzalloc return valueZhang Yanfei2013-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | remove cast for kmalloc/kzalloc return value. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-sctp@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | sctp: convert sctp_assoc_set_id() to use idr_alloc_cyclic()Jeff Layton2013-04-291-14/+2
| |/ |/| | | | | | | | | | | | | | | | | | | Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | sctp: don't break the loop while meeting the active_path so as to find the ↵Xufeng Zhang2013-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | matched transport sctp_assoc_lookup_tsn() function searchs which transport a certain TSN was sent on, if not found in the active_path transport, then go search all the other transports in the peer's transport_addr_list, however, we should continue to the next entry rather than break the loop when meet the active_path transport. Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Use correct sideffect command in duplicate cookie handlingVlad Yasevich2013-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When SCTP is done processing a duplicate cookie chunk, it tries to delete a newly created association. For that, it has to set the right association for the side-effect processing to work. However, when it uses the SCTP_CMD_NEW_ASOC command, that performs more work then really needed (like hashing the associationa and assigning it an id) and there is no point to do that only to delete the association as a next step. In fact, it also creates an impossible condition where an association may be found by the getsockopt() call, and that association is empty. This causes a crash in some sctp getsockopts. The solution is rather simple. We simply use SCTP_CMD_SET_ASOC command that doesn't have all the overhead and does exactly what we need. Reported-by: Karl Heiss <kheiss@gmail.com> Tested-by: Karl Heiss <kheiss@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2013-03-055-31/+85
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "A moderately sized pile of fixes, some specifically for merge window introduced regressions although others are for longer standing items and have been queued up for -stable. I'm kind of tired of all the RDS protocol bugs over the years, to be honest, it's way out of proportion to the number of people who actually use it. 1) Fix missing range initialization in netfilter IPSET, from Jozsef Kadlecsik. 2) ieee80211_local->tim_lock needs to use BH disabling, from Johannes Berg. 3) Fix DMA syncing in SFC driver, from Ben Hutchings. 4) Fix regression in BOND device MAC address setting, from Jiri Pirko. 5) Missing usb_free_urb in ISDN Hisax driver, from Marina Makienko. 6) Fix UDP checksumming in bnx2x driver for 57710 and 57711 chips, fix from Dmitry Kravkov. 7) Missing cfgspace_lock initialization in BCMA driver. 8) Validate parameter size for SCTP assoc stats getsockopt(), from Guenter Roeck. 9) Fix SCTP association hangs, from Lee A Roberts. 10) Fix jumbo frame handling in r8169, from Francois Romieu. 11) Fix phy_device memory leak, from Petr Malat. 12) Omit trailing FCS from frames received in BGMAC driver, from Hauke Mehrtens. 13) Missing socket refcount release in L2TP, from Guillaume Nault. 14) sctp_endpoint_init should respect passed in gfp_t, rather than use GFP_KERNEL unconditionally. From Dan Carpenter. 15) Add AISX AX88179 USB driver, from Freddy Xin. 16) Remove MAINTAINERS entries for drivers deleted during the merge window, from Cesar Eduardo Barros. 17) RDS protocol can try to allocate huge amounts of memory, check that the user's request length makes sense, from Cong Wang. 18) SCTP should use the provided KMALLOC_MAX_SIZE instead of it's own, bogus, definition. From Cong Wang. 19) Fix deadlocks in FEC driver by moving TX reclaim into NAPI poll, from Frank Li. Also, fix a build error introduced in the merge window. 20) Fix bogus purging of default routes in ipv6, from Lorenzo Colitti. 21) Don't double count RTT measurements when we leave the TCP receive fast path, from Neal Cardwell." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tcp: fix double-counted receiver RTT when leaving receiver fast path CAIF: fix sparse warning for caif_usb rds: simplify a warning message net: fec: fix build error in no MXC platform net: ipv6: Don't purge default router if accept_ra=2 net: fec: put tx to napi poll function to fix dead lock sctp: use KMALLOC_MAX_SIZE instead of its own MAX_KMALLOC_SIZE rds: limit the size allocated by rds_message_alloc() MAINTAINERS: remove eexpress MAINTAINERS: remove drivers/net/wan/cycx* MAINTAINERS: remove 3c505 caif_dev: fix sparse warnings for caif_flow_cb ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver sctp: use the passed in gfp flags instead GFP_KERNEL ipv[4|6]: correct dropwatch false positive in local_deliver_finish l2tp: Restore socket refcount when sendmsg succeeds net/phy: micrel: Disable asymmetric pause for KSZ9021 bgmac: omit the fcs phy: Fix phy_device_free memory leak bnx2x: Fix KR2 work-around condition ...
| * sctp: use KMALLOC_MAX_SIZE instead of its own MAX_KMALLOC_SIZECong Wang2013-03-041-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Don't definite its own MAX_KMALLOC_SIZE, use the one defined in mm. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: use the passed in gfp flags instead GFP_KERNELDan Carpenter2013-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | This patch doesn't change how the code works because in the current kernel gfp is always GFP_KERNEL. But gfp was obviously intended instead of GFP_KERNEL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: fix association hangs due to partial delivery errorsLee A. Roberts2013-02-281-11/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In sctp_ulpq_tail_data(), use return values 0,1 to indicate whether a complete event (with MSG_EOR set) was delivered. A return value of -ENOMEM continues to indicate an out-of-memory condition was encountered. In sctp_ulpq_retrieve_partial() and sctp_ulpq_retrieve_first(), correct message reassembly logic for SCTP partial delivery. Change logic to ensure that as much data as possible is sent with the initial partial delivery and that following partial deliveries contain all available data. In sctp_ulpq_partial_delivery(), attempt partial delivery only if the data on the head of the reassembly queue is at or before the cumulative TSN ACK point. In sctp_ulpq_renege(), use the modified return values from sctp_ulpq_tail_data() to choose whether to attempt partial delivery or to attempt to drain the reassembly queue as a means to reduce memory pressure. Remove call to sctp_tsnmap_mark(), as this is handled correctly in call to sctp_ulpq_tail_data(). Signed-off-by: Lee A. Roberts <lee.roberts@hp.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
| * sctp: fix association hangs due to errors when reneging events from the ↵Lee A. Roberts2013-02-281-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | ordering queue In sctp_ulpq_renege_list(), events being reneged from the ordering queue may correspond to multiple TSNs. Identify all affected packets; sum freed space and renege from the tsnmap. Signed-off-by: Lee A. Roberts <lee.roberts@hp.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
| * sctp: fix association hangs due to reneging packets below the cumulative TSN ↵Lee A. Roberts2013-02-281-2/+7
| | | | | | | | | | | | | | | | | | | | | | ACK point In sctp_ulpq_renege_list(), do not renege packets below the cumulative TSN ACK point. Signed-off-by: Lee A. Roberts <lee.roberts@hp.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
OpenPOWER on IntegriCloud