summaryrefslogtreecommitdiffstats
path: root/net/sctp/output.c
Commit message (Collapse)AuthorAgeFilesLines
* sctp: move skb_dst_set() a bit downwards in sctp_packet_transmit()wangweidong2013-12-311-2/+2
| | | | | | | | | | | | | skb_dst_set will use dst, if dst is NULL although is not a problem, then goto the 'no_route' and free nskb, so do the skb_dst_set is pointless. so move the skb_dst_set after dst check. Remove the unnecessary initialization as well. v2: fix the subject line because it would confuse people, as pointed out by Daniel. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: fix checkpatch errors with indentwangweidong2013-12-261-6/+5
| | | | | | | | | | fix checkpatch errors below: ERROR: switch and case should be at the same inden ERROR: code indent should use tabs where possible Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: remove casting from function calls through ops structurewangweidong2013-12-221-2/+2
| | | | | | | | remove the unnecessary cast. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-12-181-1/+2
|\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c drivers/net/macvtap.c Both minor merge hassles, simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: properly latch and use autoclose value from sock to associationNeil Horman2013-12-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, sctp associations latch a sockets autoclose value to an association at association init time, subject to capping constraints from the max_autoclose sysctl value. This leads to an odd situation where an application may set a socket level autoclose timeout, but sliently sctp will limit the autoclose timeout to something less than that. Fix this by modifying the autoclose setsockopt function to check the limit, cap it and warn the user via syslog that the timeout is capped. This will allow getsockopt to return valid autoclose timeout values that reflect what subsequent associations actually use. While were at it, also elimintate the assoc->autoclose variable, it duplicates whats in the timeout array, which leads to multiple sources for the same information, that may differ (as the former isn't subject to any capping). This gives us the timeout information in a canonical place and saves some space in the association structure as well. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> CC: Wang Weidong <wangweidong1@huawei.com> CC: David Miller <davem@davemloft.net> CC: Vlad Yasevich <vyasevich@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Fix FSF address in file headersJeff Kirsher2013-12-061-3/+2
|/ | | | | | | | | | | | Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Vlad Yasevich <vyasevich@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Restore 'resent' bit to avoid retransmitted chunks for RTT measurementsXufeng Zhang2013-11-281-1/+2
| | | | | | | | | | | | | | Currently retransmitted DATA chunks could also be used for RTT measurements since there are no flag to identify whether the transmitted DATA chunk is a new one or a retransmitted one. This problem is introduced by commit ae19c5486 ("sctp: remove 'resent' bit from the chunk") which inappropriately removed the 'resent' bit completely, instead of doing this, we should set the resent bit only for the retransmitted DATA chunks. Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: fix and consolidate SCTP checksumming codeDaniel Borkmann2013-11-031-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes an outstanding bug found through IPVS, where SCTP packets with skb->data_len > 0 (non-linearized) and empty frag_list, but data accumulated in frags[] member, are forwarded with incorrect checksum letting SCTP initial handshake fail on some systems. Linearizing each SCTP skb in IPVS to prevent that would not be a good solution as this leads to an additional and unnecessary performance penalty on the load-balancer itself for no good reason (as we actually only want to update the checksum, and can do that in a different/better way presented here). The actual problem is elsewhere, namely, that SCTP's checksumming in sctp_compute_cksum() does not take frags[] into account like skb_checksum() does. So while we are fixing this up, we better reuse the existing code that we have anyway in __skb_checksum() and use it for walking through the data doing checksumming. This will not only fix this issue, but also consolidates some SCTP code with core sk_buff code, bringing it closer together and removing respectively avoiding reimplementation of skb_checksum() for no good reason. As crc32c() can use hardware implementation within the crypto layer, we leave that intact (it wraps around / falls back to e.g. slice-by-8 algorithm in __crc32c_le() otherwise); plus use the __crc32c_le_combine() combinator for crc32c blocks. Also, we remove all other SCTP checksumming code, so that we only have to use sctp_compute_cksum() from now on; for doing that, we need to transform SCTP checkumming in output path slightly, and can leave the rest intact. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Perform software checksum if packet has to be fragmented.Vlad Yasevich2013-10-171-1/+1
| | | | | | | | | | | | | | | IP/IPv6 fragmentation knows how to compute only TCP/UDP checksum. This causes problems if SCTP packets has to be fragmented and ipsummed has been set to PARTIAL due to checksum offload support. This condition can happen when retransmitting after MTU discover, or when INIT or other control chunks are larger then MTU. Check for the rare fragmentation condition in SCTP and use software checksum calculation in this case. CC: Fan Du <fan.du@windriver.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Use software crc32 checksum when xfrm transform will happen.Fan Du2013-10-171-1/+2
| | | | | | | | | | | | | | | igb/ixgbe have hardware sctp checksum support, when this feature is enabled and also IPsec is armed to protect sctp traffic, ugly things happened as xfrm_output checks CHECKSUM_PARTIAL to do checksum operation(sum every thing up and pack the 16bits result in the checksum field). The result is fail establishment of sctp communication. Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: sctp: convert sctp_checksum_disable module param into sctp sysctl"David S. Miller2013-08-091-4/+1
| | | | | | | | This reverts commit cda5f98e36576596b9230483ec52bff3cc97eb21. As per Vlad's request. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: trivial: update bug report in header commentDaniel Borkmann2013-08-091-6/+0
| | | | | | | | | | | | With the restructuring of the lksctp.org site, we only allow bug reports through the SCTP mailing list linux-sctp@vger.kernel.org, not via SF, as SF is only used for web hosting and nothing more. While at it, also remove the obvious statement that bugs will be fixed and incooperated into the kernel. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: convert sctp_checksum_disable module param into sctp sysctlDaniel Borkmann2013-08-091-1/+4
| | | | | | | | | Get rid of the last module parameter for SCTP and make this configurable via sysctl for SCTP like all the rest of SCTP's configuration knobs. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: trivial: update mailing list addressDaniel Borkmann2013-07-241-1/+1
| | | | | | | | | | | | The SCTP mailing list address to send patches or questions to is linux-sctp@vger.kernel.org and not lksctp-developers@lists.sourceforge.net anymore. Therefore, update all occurences. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: rework debugging framework to use pr_debug and friendsDaniel Borkmann2013-07-011-23/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should get rid of all own SCTP debug printk macros and use the ones that the kernel offers anyway instead. This makes the code more readable and conform to the kernel code, and offers all the features of dynamic debbuging that pr_debug() et al has, such as only turning on/off portions of debug messages at runtime through debugfs. The runtime cost of having CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing, is negligible [1]. If kernel debugging is completly turned off, then these statements will also compile into "empty" functions. While we're at it, we also need to change the Kconfig option as it /now/ only refers to the ifdef'ed code portions in outqueue.c that enable further debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code was enabled with this Kconfig option and has now been removed, we transform those code parts into WARNs resp. where appropriate BUG_ONs so that those bugs can be more easily detected as probably not many people have SCTP debugging permanently turned on. To turn on all SCTP debugging, the following steps are needed: # mount -t debugfs none /sys/kernel/debug # echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control This can be done more fine-grained on a per file, per line basis and others as described in [2]. [1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf [2] Documentation/dynamic-debug-howto.txt Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: minor: remove dead code from sctp_packetDaniel Borkmann2013-04-221-4/+1
| | | | | | | | | | struct sctp_packet is currently embedded into sctp_transport or sits on the stack as 'singleton' in sctp_outq_flush(). Therefore, its member 'malloced' is always 0, thus a kfree() is never called. Because of that, we can just remove this code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Add support to per-association statistics via a new ↵Michele Baldessari2012-12-031-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCTP_GET_ASSOC_STATS call The current SCTP stack is lacking a mechanism to have per association statistics. This is an implementation modeled after OpenSolaris' SCTP_GET_ASSOC_STATS. Userspace part will follow on lksctp if/when there is a general ACK on this. V4: - Move ipackets++ before q->immediate.func() for consistency reasons - Move sctp_max_rto() at the end of sctp_transport_update_rto() to avoid returning bogus RTO values - return asoc->rto_min when max_obs_rto value has not changed V3: - Increase ictrlchunks in sctp_assoc_bh_rcv() as well - Move ipackets++ to sctp_inq_push() - return 0 when no rto updates took place since the last call V2: - Implement partial retrieval of stat struct to cope for future expansion - Kill the rtxpackets counter as it cannot be precise anyway - Rename outseqtsns to outofseqtsns to make it clearer that these are out of sequence unexpected TSNs - Move asoc->ipackets++ under a lock to avoid potential miscounts - Fold asoc->opackets++ into the already existing asoc check - Kill unneeded (q->asoc) test when increasing rtxchunks - Do not count octrlchunks if sending failed (SCTP_XMIT_OK != 0) - Don't count SHUTDOWNs as SACKs - Move SCTP_GET_ASSOC_STATS to the private space API - Adjust the len check in sctp_getsockopt_assoc_stats() to allow for future struct growth - Move association statistics in their own struct - Update idupchunks when we send a SACK with dup TSNs - return min_rto in max_rto when RTO has not changed. Also return the transport when max_rto last changed. Signed-off: Michele Baldessari <michele@acksyn.org> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-09-151-1/+20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: net/netfilter/nfnetlink_log.c net/netfilter/xt_LOG.c Rather easy conflict resolution, the 'net' tree had bug fixes to make sure we checked if a socket is a time-wait one or not and elide the logging code if so. Whereas on the 'net-next' side we are calculating the UID and GID from the creds using different interfaces due to the user namespace changes from Eric Biederman. Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: Don't charge for data in sndbuf again when transmitting packetThomas Graf2012-09-031-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCTP charges wmem_alloc via sctp_set_owner_w() in sctp_sendmsg() and via skb_set_owner_w() in sctp_packet_transmit(). If a sender runs out of sndbuf it will sleep in sctp_wait_for_sndbuf() and expects to be waken up by __sctp_write_space(). Buffer space charged via sctp_set_owner_w() is released in sctp_wfree() which calls __sctp_write_space() directly. Buffer space charged via skb_set_owner_w() is released via sock_wfree() which calls sk->sk_write_space() _if_ SOCK_USE_WRITE_QUEUE is not set. sctp_endpoint_init() sets SOCK_USE_WRITE_QUEUE on all sockets. Therefore if sctp_packet_transmit() manages to queue up more than sndbuf bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is interrupted by a signal. This could be fixed by clearing the SOCK_USE_WRITE_QUEUE flag but ... Charging for the data twice does not make sense in the first place, it leads to overcharging sndbuf by a factor 2. Therefore this patch only charges a single byte in wmem_alloc when transmitting an SCTP packet to ensure that the socket stays alive until the packet has been released. This means that control chunks are no longer accounted for in wmem_alloc which I believe is not a problem as skb->truesize will typically lead to overcharging anyway and thus compensates for any control overhead. Signed-off-by: Thomas Graf <tgraf@suug.ch> CC: Vlad Yasevich <vyasevic@redhat.com> CC: Neil Horman <nhorman@tuxdriver.com> CC: David Miller <davem@davemloft.net> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Make the mib per network namespaceEric W. Biederman2012-08-141-1/+1
|/ | | | | | Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Adjust PMTU updates to accomodate route invalidation.David S. Miller2012-07-161-1/+1
| | | | | | | | | This adjusts the call to dst_ops->update_pmtu() so that we can transparently handle the fact that, in the future, the dst itself can be invalidated by the PMTU update (when we have non-host routes cached in sockets). Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: refactor sctp_packet_append_chunk and clenup some memory leaksNeil Horman2012-07-081-27/+52
| | | | | | | | | | | | | | | | | | | | | | | While doing some recent work on sctp sack bundling I noted that sctp_packet_append_chunk was pretty inefficient. Specifially, it was called recursively while trying to bundle auth and sack chunks. Because of that we call sctp_packet_bundle_sack and sctp_packet_bundle_auth a total of 4 times for every call to sctp_packet_append_chunk, knowing that at least 3 of those calls will do nothing. So lets refactor sctp_packet_bundle_auth to have an outer part that does the attempted bundling, and an inner part that just does the chunk appends. This saves us several calls per iteration that we just don't need. Also, noticed that the auth and sack bundling fail to free the chunks they allocate if the append fails, so make sure we add that in Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: linux-sctp@vger.kernel.org Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: be more restrictive in transport selection on bundled sacksNeil Horman2012-06-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noticed recently that when we send data on a transport, its possible that we might bundle a sack that arrived on a different transport. While this isn't a major problem, it does go against the SHOULD requirement in section 6.4 of RFC 2960: An endpoint SHOULD transmit reply chunks (e.g., SACK, HEARTBEAT ACK, etc.) to the same destination transport address from which it received the DATA or control chunk to which it is replying. This rule should also be followed if the endpoint is bundling DATA chunks together with the reply chunk. This patch seeks to correct that. It restricts the bundling of sack operations to only those transports which have moved the ctsn of the association forward since the last sack. By doing this we guarantee that we only bundle outbound saks on a transport that has received a chunk since the last sack. This brings us into stricter compliance with the RFC. Vlad had initially suggested that we strictly allow only sack bundling on the transport that last moved the ctsn forward. While this makes sense, I was concerned that doing so prevented us from bundling in the case where we had received chunks that moved the ctsn on multiple transports. In those cases, the RFC allows us to select any of the transports having received chunks to bundle the sack on. so I've modified the approach to allow for that, by adding a state variable to each transport that tracks weather it has moved the ctsn since the last sack. This I think keeps our behavior (and performance), close enough to our current profile that I think we can do this without a sysctl knob to enable/disable it. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yaseivch <vyasevich@gmail.com> CC: David S. Miller <davem@davemloft.net> CC: linux-sctp@vger.kernel.org Reported-by: Michele Baldessari <michele@redhat.com> Reported-by: sorin serban <sserban@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-05-161-3/+1
|\
| * sctp: check cached dst before using itNicolas Dichtel2012-05-101-3/+1
| | | | | | | | | | | | | | | | | | dst_check() will take care of SA (and obsolete field), hence IPsec rekeying scenario is taken into account. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yaseivch <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: cleanup unsigned to unsigned intEric Dumazet2012-04-151-2/+2
|/ | | | | | | Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Do not account for sizeof(struct sk_buff) in estimated rwndThomas Graf2011-12-201-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When checking whether a DATA chunk fits into the estimated rwnd a full sizeof(struct sk_buff) is added to the needed chunk size. This quickly exhausts the available rwnd space and leads to packets being sent which are much below the PMTU limit. This can lead to much worse performance. The reason for this behaviour was to avoid putting too much memory pressure on the receiver. The concept is not completely irational because a Linux receiver does in fact clone an skb for each DATA chunk delivered. However, Linux also reserves half the available socket buffer space for data structures therefore usage of it is already accounted for. When proposing to change this the last time it was noted that this behaviour was introduced to solve a performance issue caused by rwnd overusage in combination with small DATA chunks. Trying to reproduce this I found that with the sk_buff overhead removed, the performance would improve significantly unless socket buffer limits are increased. The following numbers have been gathered using a patched iperf supporting SCTP over a live 1 Gbit ethernet network. The -l option was used to limit DATA chunk sizes. The numbers listed are based on the average of 3 test runs each. Default values have been used for sk_(r|w)mem. Chunk Size Unpatched No Overhead ------------------------------------- 4 15.2 Kbit [!] 12.2 Mbit [!] 8 35.8 Kbit [!] 26.0 Mbit [!] 16 95.5 Kbit [!] 54.4 Mbit [!] 32 106.7 Mbit 102.3 Mbit 64 189.2 Mbit 188.3 Mbit 128 331.2 Mbit 334.8 Mbit 256 537.7 Mbit 536.0 Mbit 512 766.9 Mbit 766.6 Mbit 1024 810.1 Mbit 808.6 Mbit Signed-off-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sctp: fix checksum marking for outgoing packetsMichał Mirosław2011-07-141-11/+8
| | | | | | | | | | | | | | Packets to devices without NETIF_F_SCTP_CSUM (including NETIF_F_NO_CSUM) should be properly checksummed because the packets can be diverted or rerouted after construction. This still leaves packets diverted from NETIF_F_SCTP_CSUM-enabled devices with broken checksums. Fixing this needs implementing software offload fallback in networking core. For users of sctp_checksum_disable, skb->ip_summed should be left as CHECKSUM_NONE and not CHECKSUM_UNNECESSARY as per include/linux/skbuff.h. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* Merge branch 'master' of ↵David S. Miller2010-09-271-1/+0
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/qlcnic/qlcnic_init.c net/ipv4/ip_output.c
| * sctp: Do not reset the packet during sctp_packet_config().Vlad Yasevich2010-09-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | sctp_packet_config() is called when getting the packet ready for appending of chunks. The function should not touch the current state, since it's possible to ping-pong between two transports when sending, and that can result packet corruption followed by skb overlfow crash. Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/sctp: Use pr_fmt and pr_<level>Joe Perches2010-08-261-0/+2
|/ | | | | | | | | | | | Change SCTP_DEBUG_PRINTK and SCTP_DEBUG_PRINTK_IPADDR to use do { print } while (0) guards. Add SCTP_DEBUG_PRINTK_CONT to fix errors in log when lines were continued. Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Add a missing newline in "Failed bind hash alloc" Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Tag messages that can be Nagle delayed at creation.Vlad Yasevich2010-04-301-1/+1
| | | | | | | | | | When we create the sctp_datamsg and fragment the user data, we know exactly if we are sending full segments or not and how they might be bundled. During this time, we can mark messages a Nagle capable or not. This makes the check at transmit time much simpler. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: remove 'resent' bit from the chunkVlad Yasevich2010-04-301-16/+9
| | | | | | | | | | | The 'resent' bit is used to make sure that we don't update rto estimate based on retransmitted chunks. However, we already have the 'rto_pending' bit that we test when need to update rto, so 'resent' bit is just extra. Additionally, we currently have a bug in that we always set a 'resent' bit and thus rto estimate is only updated by Heartbeats. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* sctp: Fix mis-ordering of user space data when multihoming in useNeil Horman2009-11-231-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently had a bug reported to me, in which the user was sending packets with a payload containing a sequence number. The packets were getting delivered in order according the chunk TSN values, but the sequence values in the payload were arriving out of order. At first I thought it must be an application error, but we eventually found it to be a problem on the transmit side in the sctp stack. The conditions for the error are that multihoming must be in use, and it helps if each transport has a different pmtu. The problem occurs in sctp_outq_flush. Basically we dequeue packets from the data queue, and attempt to append them to the orrered packet for a given transport. After we append a data chunk we add the trasport to the end of a list of transports to have their packets sent at the end of sctp_outq_flush. The problem occurs when a data chunks fills up a offered packet on a transport. The function that does the appending (sctp_packet_transmit_chunk), will try to call sctp_packet_transmit on the full packet, and then append the chunk to a new packet. This call to sctp_packet_transmit, sends that packet ahead of the others that may be queued in the transport_list in sctp_outq_flush. The result is that frames that were sent in one order from the user space sending application get re-ordered prior to tsn assignment in sctp_packet_transmit, resulting in mis-sequencing of data payloads, even though tsn ordering is correct. The fix is to change where we assign a tsn. By doing this earlier, we are then free to place chunks in packets, whatever way we see fit and the protocol will make sure to do all the appropriate re-ordering on receive as is needed. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: William Reich <reich@ulticom.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Update max.burst implementationVlad Yasevich2009-11-231-23/+0
| | | | | | | | | | | | | Current implementation of max.burst ends up limiting new data during cwnd decay period. The decay is happening becuase the connection is idle and we are allowed to fill the congestion window. The point of max.burst is to limit micro-bursts in response to large acks. This still happens, as max.burst is still applied to each transmit opportunity. It will also apply if a very large send is made (greater then allowed by burst). Tested-by: Florian Niederbacher <florian.niederbacher@student.uibk.ac.at> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Remove useless last_time_used variableVlad Yasevich2009-11-231-2/+0
| | | | | | | | | | | | | | | The transport last_time_used variable is rather useless. It was only used when determining if CWND needs to be updated due to idle transport. However, idle transport detection was based on a Heartbeat timer and last_time_used was not incremented when sending Heartbeats. As a result the check for cwnd reduction was always true. We can get rid of the variable and just base our cwnd manipulation on the HB timer (like the code comment sais). We also have to call into the cwnd manipulation function regardless of whether HBs are enabled or not. That way we will detect idle transports if the user has disabled Heartbeats. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: remove dup code in net/sctp/output.cWei Yongjun2009-09-041-24/+13
| | | | | | | Use sctp_packet_reset() instead of dup code. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Correctly track if AUTH has been bundled.Vlad Yasevich2009-09-041-1/+1
| | | | | | | | | We currently track if AUTH has been bundled using the 'auth' pointer to the chunk. However, AUTH is disallowed after DATA is already in the packet, so we need to instead use the 'has_auth' field. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: fix to reset packet information after packet transmitWei Yongjun2009-09-041-1/+12
| | | | | | | | | | The packet information does not reset after packet transmit, this may cause some problems such as following DATA chunk be sent without AUTH chunk, even if the authentication of DATA chunk has been requested by the peer. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Don't do NAGLE delay on large writes that were fragmented smallVlad Yasevich2009-09-041-1/+3
| | | | | | | | | | | | | SCTP will delay the last part of a large write due to NAGLE, if that part is smaller then MTU. Since we are doing large writes, we might as well send the last portion now instead of waiting untill the next large write happens. The small portion will be sent as is regardless, so it's better to not delay it. This is a result of much discussions with Wei Yongjun <yjwei@cn.fujitsu.com> and Doug Graham <dgraham@nortel.com>. Many thanks go out to them. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Nagle delay should be based on path mtuVlad Yasevich2009-09-041-2/+3
| | | | | | | | | | | The decision to delay due to Nagle should be based on the path mtu and future packet size. We currently incorrectly base it on 'frag_point' which is the SCTP DATA segment size, and also we do not count DATA chunk header overhead in the computation. This actuall allows situations where a user can set low 'frag_point', and then send small messages without delay. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Generate SACKs when actually sending outbound DATAVlad Yasevich2009-09-041-57/+85
| | | | | | | | | | | | | | | We are now trying to bundle SACKs when we have outbound DATA to send. However, there are situations where this outbound DATA will not be sent (due to congestion or available window). In such cases it's ok to wait for the timer to expire. This patch refactors the sending code so that betfore attempting to bundle the SACK we check to see if the DATA will actually be transmitted. Based on eirlier works for Doug Graham <dgraham@nortel.com> and Wei Youngjun <yjwei@cn.fujitsu.com>. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Fix piggybacked ACKsDoug Graham2009-09-041-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the conditions under which a SACK will be piggybacked on a DATA packet. The previous condition was incorrect due to a misinterpretation of RFC 4960 and/or RFC 2960. Specifically, the following paragraph from section 6.2 had not been implemented correctly: Before an endpoint transmits a DATA chunk, if any received DATA chunks have not been acknowledged (e.g., due to delayed ack), the sender should create a SACK and bundle it with the outbound DATA chunk, as long as the size of the final SCTP packet does not exceed the current MTU. See Section 6.2. When about to send a DATA chunk, the code now checks to see if the SACK timer is running. If it is, we know we have a SACK to send to the peer, so we append the SACK (assuming available space in the packet) and turn off the timer. For a simple request-response scenario, this will result in the SACK being bundled with the response, meaning the the SACK is received quickly by the client, and also meaning that no separate SACK packet needs to be sent by the server to acknowledge the request. Prior to this patch, a separate SACK packet would have been sent by the server SCTP only after its delayed-ACK timer had expired (usually 200ms). This is wasteful of bandwidth, and can also have a major negative impact on performance due the interaction of delayed ACKs with the Nagle algorithm. Signed-off-by: Doug Graham <dgraham@nortel.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: xmit sctp packet always return no route errorWei Yongjun2009-06-291-1/+1
| | | | | | | | | | | Commit 'net: skb->dst accessors'(adf30907d63893e4208dfe3f5c88ae12bc2f25d5) broken the sctp protocol stack, the sctp packet can never be sent out after Eric Dumazet's patch, which have typo in the sctp code. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Vlad Yasevich <vladisalv.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: skb->dst accessorsEric Dumazet2009-06-031-3/+3
| | | | | | | | | | | | | | | | | | Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: add feature bit for SCTP offload in hardwareJesse Brandeburg2009-04-281-3/+14
| | | | | | | | | | | | | | this is the sctp code to enable hardware crc32c offload for adapters that support it. Originally by: Vlad Yasevich <vladislav.yasevich@hp.com> modified by Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Clean up TEST_FRAME hacks.Vlad Yasevich2009-03-211-4/+1
| | | | | | | | Remove 2 TEST_FRAME hacks that are no longer needed. These allowed sctp regression tests to compile before, but are no longer needed. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Clean up sctp checksumming codeVlad Yasevich2009-02-161-8/+6
| | | | | | | | | | | The sctp crc32c checksum is always generated in little endian. So, we clean up the code to treat it as little endian and remove all the __force casts. Suggested by Herbert Xu. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud