summaryrefslogtreecommitdiffstats
path: root/net/mac80211
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: fix use-after-free in defragmentationJohannes Berg2014-11-031-7/+7
| | | | | | | | | | | | | | | Upon receiving the last fragment, all but the first fragment are freed, but the multicast check for statistics at the end of the function refers to the current skb (the last fragment) causing a use-after-free bug. Since multicast frames cannot be fragmented and we check for this early in the function, just modify that check to also do the accounting to fix the issue. Cc: stable@vger.kernel.org Reported-by: Yosef Khyal <yosefx.khyal@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: properly flush delayed scan work on interface removalJohannes Berg2014-10-301-1/+6
| | | | | | | | | | | | | | | | | | | When an interface is deleted, an ongoing hardware scan is canceled and the driver must abort the scan, at the very least reporting completion while the interface is removed. However, if it scheduled the work that might only run after everything is said and done, which leads to cfg80211 warning that the scan isn't reported as finished yet; this is no fault of the driver, it already did, but mac80211 hasn't processed it. To fix this situation, flush the delayed work when the interface being removed is the one that was executing the scan. Cc: stable@vger.kernel.org Reported-by: Sujith Manoharan <sujith@msujith.org> Tested-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: schedule the actual switch of the station before CSA count 0Luciano Coelho2014-10-291-1/+2
| | | | | | | | | | | Due to the time it takes to process the beacon that started the CSA process, we may be late for the switch if we try to reach exactly beacon 0. To avoid that, use count - 1 when calculating the switch time. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use secondary channel offset IE also beacons during CSALuciano Coelho2014-10-295-17/+10
| | | | | | | | | | | | | | | | | | | | | If we are switching from an HT40+ to an HT40- channel (or vice-versa), we need the secondary channel offset IE to specify what is the post-CSA offset to be used. This applies both to beacons and to probe responses. In ieee80211_parse_ch_switch_ie() we were ignoring this IE from beacons and using the *current* HT information IE instead. This was causing us to use the same offset as before the switch. Fix that by using the secondary channel offset IE also for beacons and don't ever use the pre-switch offset. Additionally, remove the "beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not needed anymore. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: flush keys for AP mode on ieee80211_do_stopFelix Fietkau2014-10-291-5/+6
| | | | | | | | | | Userspace can add keys to an AP mode interface before start_ap has been called. If there have been no calls to start_ap/stop_ap in the mean time, the keys will still be around when the interface is brought down. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [adjust comments, fix AP_VLAN case] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: minstrels: fix buffer overflow in HT debugfs rc_statsKarl Beldan2014-10-202-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ATM an HT rc_stats line is 106 chars. Times 8(MCS_GROUP_RATES)*3(SS)*2(GI)*2(BW) + CCK(4), i.e. x100, this is well above the current 8192 - sizeof(*ms) currently allocated. Fix this by squeezing the output as follows (not that we're short on memory but this also improves readability and range, the new format adds one more digit to *ok/*cum and ok/cum): - Before (HT) (106 ch): type rate throughput ewma prob this prob retry this succ/attempt success attempts CCK/LP 5.5M 0.0 0.0 0.0 0 0( 0) 0 0 HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0 0 - After (75 ch): type rate tpt eprob *prob ret *ok(*cum) ok( cum) CCK/LP 5.5M 0.0 0.0 0.0 0 0( 0) 0( 0) HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0( 0) - Align non-HT format Before (non-HT) (83 ch): rate throughput ewma prob this prob this succ/attempt success attempts ABCDP 6 0.0 0.0 0.0 0( 0) 0 0 54 0.0 0.0 0.0 0( 0) 0 0 - After (61 ch): rate tpt eprob *prob *ok(*cum) ok( cum) ABCDP 1 0.0 0.0 0.0 0( 0) 0( 0) 54 0.0 0.0 0.0 0( 0) 0( 0) *This also adds dynamic checks for overflow, lowers the size of the non-HT request (allowing > 30 entries) and replaces the buddy-rounded allocations (s/sizeof(*ms) + 8192/8192). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix typo in starting baserate for rts_cts_rate_idxKarl Beldan2014-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | It affects non-(V)HT rates and can lead to selecting an rts_cts rate that is not a basic rate or way superior to the reference rate (ATM rates[0] used for the 1st attempt of the protected frame data). E.g, assuming drivers register growing (bitrate) sorted tables of ieee80211_rate-s, having : - rates[0].idx == d'2 and basic_rates == b'10100 will select rts_cts idx b'10011 & ~d'(BIT(2)-1), i.e. 1, likewise - rates[0].idx == d'2 and basic_rates == b'10001 will select rts_cts idx b'10000 The first is not a basic rate and the second is > rates[0]. Also, wrt severity of the addressed misbehavior, ATM we only have one rts_cts_rate_idx rather than one per rate table entry, so this idx might still point to bitrates > rates[1..MAX_RATES]. Fixes: 5253ffb8c9e1 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates") Cc: stable@vger.kernel.org Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: return the vif's chandef in ieee80211_cfg_get_channel()Luciano Coelho2014-10-091-1/+1
| | | | | | | | | | | | | The chandef of the channel context a vif is using may be different than the chandef of the vif itself. For instance, the bandwidth used by the vif may be narrower than the one configured in the channel context. To avoid confusion, return the vif's chandef in ieee80211_cfg_get_channel() instead of the chandef of the channel context. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix warning on htmldocs for last_tdls_pkt_timeLiad Kaufman2014-10-091-0/+1
| | | | | | | | Forgot to add an entry to the struct description of sta_info. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'master-2014-09-16' of ↵David S. Miller2014-09-2629-303/+579
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-09-22 Please pull this batch of updates intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." For the bluetooth bits, Johan says: "Here are some more patches intended for 3.18. Most of them are cleanups or fixes for SMP. The only exception is a fix for BR/EDR L2CAP fixed channels which should now work better together with the L2CAP information request procedure." For the iwlwifi bits, Emmanuel says: "I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more to come soon. Besides this, nothing really special here." Beyond that, there are the usual big batches of updates to ath9k, b43, mwifiex, and wil6210 as well as a handful of other bits here and there. Also, rtlwifi gets some btcoexist attention from Larry. Please let me know if there are problems! ==================== Had to adjust the wil6210 code to comply with Joe Perches's recent change in net-next to make the netdev_*() routines return void instead of 'int'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'mac80211-next-for-john-2014-09-12' of ↵John W. Linville2014-09-1529-303/+579
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." Conflicts: net/mac80211/iface.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mac80211: replace SMPS hw flags with wiphy feature bitsEliad Peller2014-09-113-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new static_smps / dynamic_smps feature bits instead of mac80211-internal hw flags. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: set smps_mode according to ap paramsEliad Peller2014-09-111-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Take the requested smps mode from the ap params (instead of always starting with SMPS_OFF) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: set network header in TDLS framesArik Nemtsov2014-09-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Correctly mark the network header location in mac80211-generated TDLS frames. These may be used by lower-level drivers. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * cfg80211/mac80211: add wmm info to assoc eventEliad Peller2014-09-111-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Userspace might need to know what queues are configured for uapsd (e.g. for setting proper default values in tspecs). Add this bitmap to the association event (inside wmm nested attribute) Add additional parameter to cfg80211_rx_assoc_resp, and update its callers. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: add TDLS connection timeoutLiad Kaufman2014-09-112-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding a timeout for tearing down a TDLS connection that hasn't had ACKed traffic sent through it for a certain amount of time. Since we have no other monitoring facility to indicate the existance (or non-existance) of a peer, this patch will cause a peer to be considered as unavailable if for some X time at least some Y packets have all not been ACKed. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: improve minstrel_ht rate sorting by throughput & probabilityThomas Huehn2014-09-113-119/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves the way minstrel_ht sorts rates according to throughput and success probability. 3 FOR-loops across the entire rate and mcs group set in function minstrel_ht_update_stats() which where used to determine the fastest, second fastest and most robust rate are reduced to 2 FOR-loop. The sorted list of rates according throughput is extended to the best four rates as we need them in upcoming joint rate and power control. The sorting is done via the new function minstrel_ht_sort_best_tp_rates(). The annotation of those 4 best throughput rates in the debugfs file rc-stats is changes to: "A,B,C,D", where A is the fastest rate and C the 4th fastest. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Tested-by: Stefan Venz <ikstream86@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: Unify rate statistic variables between Minstrel & Minstrel_HTThomas Huehn2014-09-114-97/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minstrel and Mintrel_HT used there own structs to keep track of rate statistics. Unify those variables in struct minstrel_rate_states and move it to rc80211_minstrel.h for common usage. This is a clean-up patch to prepare Minstrel and Minstrel_HT codebase for upcoming TPC. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: clear key material when freeing keysJohannes Berg2014-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | When freeing the key, clear the memory to avoid having the key material stick around in memory "forever". Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: annotate MMIC head/tailroom warningJohannes Berg2014-09-081-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | This message occasionally triggers for some people as in https://bugzilla.redhat.com/show_bug.cgi?id=1111740 but it's not clear which (headroom or tailroom) is at fault. Annotate the message a bit to get more information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: support DTPC IE (from Cisco Client eXtensions)Steinar H. Gunderson2014-09-083-11/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux already supports 802.11h, where the access point can tell the client to reduce its transmission power. However, 802.11h is only defined for 5 GHz, where the need for this is much smaller than on 2.4 GHz. Cisco has their own solution, called DTPC (Dynamic Transmit Power Control). Cisco APs on a controller sometimes but not always send 802.11h; they always send DTPC, even on 2.4 GHz. This patch adds support for parsing and honoring the DTPC IE in addition to the 802.11h element (they do not always contain the same limits, so both must be honored); the format is not documented, but very simple. Tested (on top of wireless.git and on 3.16.1) against a Cisco Aironet 1142 joined to a Cisco 2504 WLC, by setting various transmit power levels for the given access points and observing the results. The Wireshark 802.11 dissector agrees with the interpretation of the element, except for negative numbers, which seem to never happen anyway. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
| | * mac80211: split 802.11h parsing from transmit power policySteinar H. Gunderson2014-09-081-19/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Decouple the logic of parsing the 802.11d and 802.11h IEs from the part of deciding what to do about the data (messaging, clamping to 0 dBm, doing the actual setting). This paves the way for the next patch, which introduces more data sources for transmit power limitation. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: fix broken use of VHT/20Mhz with some APsEyal Shapira2014-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit "mac80211: disable 40MHz support in case of 20MHz AP" broke working VHT in 20Mhz with APs like Netgear R6300v2 which do not publish support for 40Mhz but allow use of VHT in 20Mhz. The break is because VHT is disabled once no HT cap doesn't indicate support for 40Mhz. This causes the assoc request to be sent without any VHT IE and the association is only HT due to this. For more details check out commit 4a817aa7 "mac80211: allow VHT with peers not capable of 40MHz" Fixes: 53b954ee4a71 ("mac80211: disable 40MHz support in case of 20MHz AP") Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: extend set_coverage_class signatureLorenzo Bianconi2014-09-053-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend mac80211 set_coverage_class API in order to enable ACK timeout estimation algorithm (dynack) passing coverage class equals to -1 to lower drivers. Synchronize set_coverage_class routine signature with mac80211 function pointer for p54, ath9k, ath9k_htc and ath5k drivers. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: combine roc with the "next roc" if possibleEliad Peller2014-09-051-24/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the remaining time in the current roc is not long enough, mac80211 adds the new roc right after it (if they have similar params). However, in case of multiple rocs, the "next roc" is not considered, resulting in multiple rocs, each one with its own duration. Refactor the code a bit and consider the next roc, so a single max roc will be used instead of multiple rocs (which might last much longer). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: adjust roc duration when combining ROCsEliad Peller2014-09-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new duration (remaining duration after the current ROC ends) was calculated but not used, making the optimization worthless. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: Add RRM support to assoc requestAssaf Krauss2014-09-052-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | In case of a RRM-supporting connection, in the association request frame: set the RRM capability flag, and add the required IEs. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: fix description comment of ieee80211_subif_start_xmitLiad Kaufman2014-09-051-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function description claimed that on error the skb isn't freed even though it is, and stated return values that are different than what really happens in the code. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: add Intel Mobile Communications copyrightJohannes Berg2014-09-0518-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: clean up ieee80211_i.hJohannes Berg2014-09-051-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Not sure how the declaration of ieee80211_tdls_peer_del_work landed after the double inclusion protection end. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * mac80211: fix offloaded BA session traffic after hw restartMichal Kazior2014-09-035-14/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When starting an offloaded BA session it is unknown what starting sequence number should be used. Using last_seq worked in most cases except after hw restart. When hw restart is requested last_seq is (rightfully so) kept unmodified. This ended up with BA sessions being restarted with an aribtrary BA window values resulting in dropped frames until sequence numbers caught up. Instead of last_seq pick seqno of a first Rxed frame of a given BA session. This fixes stalled traffic after hw restart with offloaded BA sessions (currently only ath10k). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-09-231-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * \ \ Merge tag 'mac80211-for-john-2014-09-08' of ↵John W. Linville2014-09-091-1/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Two more fixes for mac80211 - one of them addresses a long-standing issue that we only found when using vendor events more frequently; the other addresses some bad information being reported in userspace that people were starting to actually look at." Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | mac80211: use bss_conf->dtim_period instead of conf.ps_dtim_periodEmmanuel Grumbach2014-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sta_set_sinfo is obviously takes data for specific station. This specific station is attached to a specific virtual interface. Hence we should use the dtim_period from this virtual interface rather than the system wide dtim_period. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | | mac80211: Resolve sk_refcnt/sk_wmem_alloc issue in wifi ack pathAlexander Duyck2014-09-121-11/+4
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a possible issue with the use, or lack thereof of sk_refcnt and sk_wmem_alloc in the wifi ack status functionality. Specifically if a socket were to request acknowledgements, and the socket were to have sk_refcnt drop to 0 resulting in it waiting on sk_wmem_alloc to reach 0 it would be possible to have sock_queue_err_skb orphan the last buffer, resulting in __sk_free being called on the socket. After this the buffer is enqueued on sk_error_queue, however the queue has already been flushed resulting in at least a memory leak, if not a data corruption. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge branch 'master' of ↵John W. Linville2014-09-086-8/+17
|\ \ \ \ | |/ / / | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
| * | | Merge tag 'mac80211-for-john-2014-08-29' of ↵John W. Linville2014-09-046-8/+17
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Here are a few fixes for mac80211. One has been discussed for a while and adds a terminating NUL-byte to the alpha2 sent to userspace, which shouldn't be necessary but since many places treat it as a string we couldn't move to just sending two bytes. In addition to that, we have two VLAN fixes from Felix, a mesh fix, a fix for the recently introduced RX aggregation offload, a revert for a broken patch (that luckily didn't really cause any harm) and a small fix for alignment in debugfs." Signed-off-by: John W. Linville <linville@redhat.com>
| | * | mac80211: fix agg_status debugfs file alignmentJohannes Berg2014-08-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The "RX active" string is too long, so the columns get shifted. Change it to just "RX" to avoid this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | mac80211: fix start_seq_num in Rx reorder offloadDenton Gentry2014-08-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sta->last_seq_ctrl is the seq_ctrl field from the last header seen, need to shift it 4 bits to extract the sequence number. Otherwise the ieee80211_sn_less() check at the top of ieee80211_sta_manage_reorder_buf drops frames until the sequence number catches up. Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Denton Gentry <denton.gentry@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | mac80211: mesh_plink: handle confirm frames with new plidBob Copeland2014-08-261-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 802.11 standard says when processing a plink confirm frame: "If the peerLinkID in the mesh peering instance has not been set, the Local Link ID field of the Mesh Peering Confirm request shall be copied into the peerLinkID in the mesh peering instance." We were only doing this when receiving an open peering frame, but it could happen that the open frame gets lost and so we should handle this case rather than rejecting the confirm and failing the whole peering process. Reported-by: Yu Niiro <yu.niiro@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | mac80211: fix smps mode check for AP_VLANFelix Fietkau2014-08-261-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In ieee80211_sta_ps_deliver_wakeup, sdata->smps_mode is checked. This is initialized only for the base AP interface, not the individual VLANs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | mac80211: ignore AP_VLAN in ieee80211_recalc_chanctx_chantypeFelix Fietkau2014-08-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When bringing down the AP, a WARN_ON is hit because the bss config chandef is empty here. Since AP_VLAN channel settings do not matter for anything chanctx related (always inherits the settings from the AP interface), let's just ignore it here. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | Revert "mac80211: disable uAPSD if all ACs are under ACM"Johannes Berg2014-08-261-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 24aa11ab8ae03292d38ec0dbd9bc2ac49fe8a6dd. That commit was wrong since it uses data that hasn't even been set up yet, but might be a hold-over from a previous connection. Additionally, it seems like a driver-specific workaround that shouldn't have been in mac80211 to start with. Cc: stable@vger.kernel.org Fixes: 24aa11ab8ae0 ("mac80211: disable uAPSD if all ACs are under ACM") Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | | Merge tag 'mac80211-next-for-john-2014-08-29' of ↵John W. Linville2014-09-0416-154/+147
|\ \ \ \ | |/ / / |/| | / | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "Not that much content this time. Some RCU cleanups, crypto performance improvements, and various patches all over, rather than listing them one might as well look into the git log instead." Signed-off-by: John W. Linville <linville@tuxdriver.com> Conflicts: drivers/net/wireless/ath/wil6210/wmi.c
| * | mac80211: fix chantype recalc warningMichal Kazior2014-08-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a device driver is unloaded local->interfaces list is cleared. If there was more than 1 interface running and connected (bound to a chanctx) then chantype recalc was called and it ended up with compat being NULL causing a call trace warning. Warn if compat becomes NULL as a result of incompatible bss_conf.chandef of interfaces bound to a given channel context only. The call trace looked like this: WARNING: CPU: 2 PID: 2594 at /devel/src/linux/net/mac80211/chan.c:557 ieee80211_recalc_chanctx_chantype+0x2cd/0x2e0() Modules linked in: ath10k_pci(-) ath10k_core ath CPU: 2 PID: 2594 Comm: rmmod Tainted: G W 3.16.0-rc1+ #150 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000009 ffff88001ea279c0 ffffffff818dfa93 0000000000000000 ffff88001ea279f8 ffffffff810514a8 ffff88001ce09cd0 ffff88001e03cc58 0000000000000000 ffff88001ce08840 ffff88001ce09cd0 ffff88001ea27a08 Call Trace: [<ffffffff818dfa93>] dump_stack+0x4d/0x66 [<ffffffff810514a8>] warn_slowpath_common+0x78/0xa0 [<ffffffff81051585>] warn_slowpath_null+0x15/0x20 [<ffffffff818a407d>] ieee80211_recalc_chanctx_chantype+0x2cd/0x2e0 [<ffffffff818a3dda>] ? ieee80211_recalc_chanctx_chantype+0x2a/0x2e0 [<ffffffff818a4919>] ieee80211_assign_vif_chanctx+0x1a9/0x770 [<ffffffff818a6220>] __ieee80211_vif_release_channel+0x70/0x130 [<ffffffff818a6dd3>] ieee80211_vif_release_channel+0x43/0xb0 [<ffffffff81885f4e>] ieee80211_stop_ap+0x21e/0x5a0 [<ffffffff8184b9b5>] __cfg80211_stop_ap+0x85/0x520 [<ffffffff8181c188>] __cfg80211_leave+0x68/0x120 [<ffffffff8181c268>] cfg80211_leave+0x28/0x40 [<ffffffff8181c5f3>] cfg80211_netdev_notifier_call+0x373/0x6b0 [<ffffffff8107f965>] notifier_call_chain+0x55/0x110 [<ffffffff8107fa41>] raw_notifier_call_chain+0x11/0x20 [<ffffffff816a8dc0>] call_netdevice_notifiers_info+0x30/0x60 [<ffffffff816a8eb9>] __dev_close_many+0x59/0xf0 [<ffffffff816a9021>] dev_close_many+0x81/0x120 [<ffffffff816aa1c5>] rollback_registered_many+0x115/0x2a0 [<ffffffff816aa3a6>] unregister_netdevice_many+0x16/0xa0 [<ffffffff8187d841>] ieee80211_remove_interfaces+0x121/0x1b0 [<ffffffff8185e0e6>] ieee80211_unregister_hw+0x56/0x110 [<ffffffffa0011ac4>] ath10k_mac_unregister+0x14/0x60 [ath10k_core] [<ffffffffa0014fe7>] ath10k_core_unregister+0x27/0x40 [ath10k_core] [<ffffffffa003b1f4>] ath10k_pci_remove+0x44/0xa0 [ath10k_pci] [<ffffffff81373138>] pci_device_remove+0x28/0x60 [<ffffffff814cb534>] __device_release_driver+0x64/0xd0 [<ffffffff814cbcc8>] driver_detach+0xb8/0xc0 [<ffffffff814cb23a>] bus_remove_driver+0x4a/0xb0 [<ffffffff814cc697>] driver_unregister+0x27/0x50 Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: Replace rcu_dereference() with rcu_access_pointer()Andreea-Cristina Bernat2014-08-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "rcu_dereference()" calls are used directly in conditions. Since their return values are never dereferenced it is recommended to use "rcu_access_pointer()" instead of "rcu_dereference()". Therefore, this patch makes the replacements. The following Coccinelle semantic patch was used: @@ @@ ( if( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} | while( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} ) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: scan: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Andreea-Cristina Bernat2014-08-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The use of "rcu_assign_pointer()" is NULLing out the pointer. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: don't resize skbs needlesslyIdo Yariv2014-08-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Header-less cloned skbs with sufficient headroom need not be cloned unless the tailroom is going to be modified. Fix ieee80211_skb_resize so it would only resize cloned skbs if either the header isn't released or the tailroom is going to be modified. Some drivers might have assumed that skbs are never cloned, so add a HW flag that explicitly permits cloned TX skbs. Drivers which do not modify TX skbs should set this flag to avoid copying skbs. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: Fix accounting of the tailroom-needed counterIdo Yariv2014-08-261-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When hw acceleration is enabled, the GENERATE_IV or PUT_IV_SPACE flags will only require headroom space. Consequently, the tailroom-needed counter can safely be decremented. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | cfg80211: remove @gfp parameter from cfg80211_rx_mgmt()Vladimir Kondratiev2014-08-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the cfg80211_rx_mgmt(), parameter @gfp was used for the memory allocation. But, memory get allocated under spin_lock_bh(), this implies atomic context. So, one can't use GFP_KERNEL, only variants with no __GFP_WAIT. Actually, in all occurrences GFP_ATOMIC is used (wil6210 use GFP_KERNEL by mistake), and it should be this way or warning triggered in the memory allocation code. Remove @gfp parameter as no actual choice exist, and use hard coded GFP_ATOMIC for memory allocation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
OpenPOWER on IntegriCloud