summaryrefslogtreecommitdiffstats
path: root/net/mac80211
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: report deauth to cfg80211 for local state changeJohannes Berg2013-05-161-4/+4
| | | | | | | | | Even if the frame isn't transmitted to the AP, we need to report it to cfg80211 so the state there can be updated correctly. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix AP-mode frame matchingJohannes Berg2013-05-161-0/+3
| | | | | | | | | | | In AP mode, ignore frames with mis-matched BSSID that aren't multicast or sent to the correct destination. This fixes reporting public action frames to userspace multiple times on multiple virtual AP interfaces. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: use just spin_lock() in ieee80211_get_tkip_p2k()Johannes Berg2013-05-161-2/+2
| | | | | | | | | | | | ieee80211_get_tkip_p2k() may be called with interrupts disabled, so spin_unlock_bh() isn't safe and leads to warnings. Since it's always called with BHs disabled already, just use spin_lock(). Cc: stable@vger.kernel.org Reported-by: Milan Kocian <milon@wq.cz> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix spurious RCU warning and update documentationFelix Fietkau2013-05-161-1/+8
| | | | | | | Document rx vs tx status concurrency requirements. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix HT beacon-based channel switch handlingJohannes Berg2013-05-161-6/+22
| | | | | | | | | | | | | | | | When an HT AP is advertising channel switch in a beacon, it doesn't (and shouldn't, according to 802.11-2012 Table 8-20) include a secondary channel offset element. The only possible interpretation is that the previous secondary channel offset remains valid, so use that when switching channel based only on beacon information. VHT requires the Wide Bandwidth Channel Switch subelement to be present in the Channel Switch Wrapper element, so the code for that is probably ok (see 802.11ac Draft 4, 8.4.2.165.) Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix IEEE80211_SDATA_DISCONNECT_RESUMEJohannes Berg2013-05-163-0/+33
| | | | | | | | | | Since commit 12e7f517029dad819c45eca9ca01fdb9ba57616b, IEEE80211_SDATA_DISCONNECT_RESUME no longer worked as it would simply never be tested. Restore a bit of the code removed there and in 9b7d72c1041ec5b20b24af487a9 to make it work again. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge branch 'master' of ↵John W. Linville2013-04-2427-830/+1309
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
| * Merge branch 'master' of ↵John W. Linville2013-04-232-12/+39
| |\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
| * | mac80211/minstrel: use the new rate control APIFelix Fietkau2013-04-222-91/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the rate selection table to mac80211 from minstrel_update_stats. Only rates for sample attempts are set in info->control.rates, with deferred sampling, only the second slot gets changed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211/minstrel_ht: use the new rate control APIFelix Fietkau2013-04-222-68/+84
| | | | | | | | | | | | | | | | | | | | | | | | Pass the rate selection table to mac80211 from minstrel_ht_update_stats. Only rates for sample attempts are set in info->control.rates. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: improve the rate control APIFelix Fietkau2013-04-223-167/+303
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow rate control modules to pass a rate selection table to mac80211 and the driver. This allows drivers to fetch the most recent rate selection from the sta pointer for already buffered frames. This allows rate control to respond faster to sudden link changes and it is also a step towards adding minstrel_ht support to drivers like iwlwifi. When a driver sets IEEE80211_HW_SUPPORTS_RC_TABLE, mac80211 will not fill info->control.rates with rates from the rate table (to preserve explicit overrides by the rate control module). The driver then explicitly calls ieee80211_get_tx_rates to merge overrides from info->control.rates with defaults from the sta rate table. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: minstrel_ht: initialize rates selectionKarl Beldan2013-04-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Initialize {mp,mi}->{max_tp_rate,max_tp_rate2,max_prob_rate} in minstrel_ht's rate_init and rate_update. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: minstrel_ht: pick only supported rates for sta and group max*ratesKarl Beldan2013-04-221-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | minstrel_ht initializes max_tp_rate max_tp_rate2 and max_prob_rate to zero both for minstrel_ht_sta and minstrel_mcs_group_data. This is wrong since there is no guarantee that the 1st rate of any group is supported. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: use synchronize_rcu() with rcu_barrier()Bob Copeland2013-04-223-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RCU docs used to state that rcu_barrier() included a wait for an RCU grace period; however the comments for rcu_barrier() as of commit f0a0e6f... "rcu: Clarify memory-ordering properties of grace-period primitives" contradict this. So add back synchronize_{rcu,net}() to where they once were, but keep the rcu_barrier()s for the call_rcu() callbacks. Cc: stable <stable@vger.kernel.org> Signed-off-by: Bob Copeland <bob@cozybit.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: indicate admission control in TX queue parametersAlexander Bondar2013-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some driver implementations need to know whether mandatory admission control is required by the AP for some ACs. Add a parameter to the TX queue parameters indicating this. As there's currently no support for admission control in mac80211's AP implementation, it's only ever set for the client implementation. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg2013-04-228-33/+77
| |\ \
| | * \ Merge branch 'for-john' of ↵John W. Linville2013-04-1019-373/+406
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/ath/carl9170/debug.c drivers/net/wireless/ath/carl9170/main.c net/mac80211/ieee80211_i.h
| * | | | mac80211: fix P2P-Device management frame RXJohannes Berg2013-04-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's an issue in receiving broadcast management frames on P2P Device virtual interfaces, such frames have the RX flag IEEE80211_RX_RA_MATCH cleared and are thus dropped in ieee80211_rx_h_mgmt_check(). They should be let through to make it to ieee80211_rx_h_userspace_mgmt() and then to userspace. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: optimize minstrel_ewmaKarl Beldan2013-04-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use powers of two in ewma of minstrel. This changes : - EWMA_DIV from 100 to 2^7 - EWMA_LEVEL from 75 (/EWMA_DIV=100) to 2^6 + 2^5 (/EWMA_DIV=128) Note that this changes EWMA_DIV - EWMA_LEVEL from 25 to 2^5 and keeps EWMA_LEVEL / EWMA_DIV == 0.75. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: cosmetics for minstrel_debugfsKarl Beldan2013-04-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the minstrel stats ouput from: rate throughput ewma prob this prob this succ/attempt success attempts BCD 6 0.0 0.0 0.0 0( 0) 0 0 to: rate throughput ewma prob this prob this succ/attempt success attempts BCD 6 0.0 0.0 0.0 0( 0) 0 0 Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: fix station entry leak/warning while suspendingJohannes Berg2013-04-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since Stanislaw's patches, when suspending while connected, cfg80211 will disconnect. This causes the AP station to be removed, which uses call_rcu() to clean up. Due to needing process context, this queues a work struct on the mac80211 workqueue. This will warn and fail when already suspended, which can happen if the rcu call doesn't happen quickly. To fix this, replace the synchronize_net() which is really just synchronize_rcu_expedited() with rcu_barrier(), which unlike synchronize_rcu() waits until RCU callback have run and thus avoids this issue. In theory, this can even happen without Stanislaw's change to disconnect on suspend since userspace might disconnect just before suspending, though then it's unlikely that the call_rcu() will be delayed long enough. Cc: stable@vger.kernel.org [3.7+] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: fix CTS protection handlingFelix Fietkau2013-04-162-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rates[0] CTS and RTS flags are only set after rate control has been called, so minstrel cannot use them to for setting the number of retries. This patch adds two new flags to explicitly indicate RTS/CTS use. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: fix and optimize MCS mask handlingFelix Fietkau2013-04-164-8/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the code always copies the configured MCS mask (even if it is set to default), but only uses it if legacy rates were also masked out. Fix this by adding a flag that tracks whether the configured MCS mask is set to default or not. Optimize the code further by storing a pointer to the configured rate mask in txrc instead of using memcpy. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: adjust initial chandefs assignments in ieee80211_register_hwKarl Beldan2013-04-161-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that monitor interfaces by default would start on 5GHz while STA/AP ones would start 2GHZ - It stems from the fact that ieee80211_register_hw unnecessarily adjusts the local->monitor_chandef for each band. This avoids this and while at it uses a single dflt_chandef to initialize in one go local->{hw.conf.chandef,_oper_chandef,monitor_chandef} Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: fix rate control tx handler for VHT ratesKarl Beldan2013-04-161-14/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Handle VHT rates like HT ones, otherwise we easily trigger the pre-HT rates WARN_ON(rc_rate->idx >= sband->n_bitrates) which will set rc_rate->idx to -1. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: remove warning from ieee80211_beacon_lossAlexander Bondar2013-04-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, mac80211 assumes that connection monitor offload for BSS station implies that the device: - sends periodic keep alive packets to associated AP - monitors missed beacons - actively probes the AP in case of missed beacons In case of poor connection conditions it expects the function ieee80211_connection_loss() to be called by driver. However, some devices implement connection monitor offload excluding active AP probing. To allow them to call ieee80211_beacon_loss() cleanly, remove the warning there and thus allow them to use mac80211 for the AP probing even if connection monitor offload is supported. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: handle wide bandwidth channel switchJohannes Berg2013-04-161-17/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parse and react to the wide bandwidth channel switch element in beacons/action frames. Finding the element was done in a previous patch (it has different positions in beacons/action frames), now handle it. If there's something wrong with it simply disconnect. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: parse VHT channel switch IEsJohannes Berg2013-04-168-18/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VHT introduces multiple IEs that need to be parsed for a wide bandwidth channel switch. Two are (currently) needed in mac80211: * wide bandwidth channel switch element * channel switch wrapper element The former is contained in the latter for beacons and probe responses, but not for the spectrum management action frames so the IE parser needs a new argument to differentiate them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: handle extended channel switch announcementJohannes Berg2013-04-162-4/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Handle the (public) extended channel switch announcement action frames. Parts of the data in these frames isn't really in IEs, but put it into the elems struct anyway to simplify the handling. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: support secondary channel offset in CSAJohannes Berg2013-04-164-20/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the secondary channel offset IE in channel switch announcements. This is necessary for proper handling of CSA on HT access points. For this to work it is also necessary to convert everything here to use chandef structs instead of just channels. The driver updates aren't really correct though. In particular, the TI wl18xx driver update can't possibly be right since it just ignores the new channel width for lack of firmware API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: support extended channel switchJohannes Berg2013-04-163-26/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support extended channel switch when the operating class is one of the global operating classes as defined in Annex E of 802.11-2012. If it isn't, disconnect from the AP instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: unify CSA action frame/beacon processingJohannes Berg2013-04-163-36/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CSA action frame content should be processed as variable IEs rather than fixed to make it extensible. Unify the code and process them just like CSA in beacons to make it easier to extend for HT/VHT. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: use second center_freq segment only in 80+80Johannes Berg2013-04-161-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The field is otherwise reserved, so we shouldn't read and reject it, though any sane system will probably have to set it to 0 anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: always pick a basic rate to tx RTS/CTS for pre-HT ratesKarl Beldan2013-04-111-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the 1st rate control entry is a pre-HT rate we want to set rts_cts_rate_idx "as the fastest basic rate that is not faster than the data rate"(code comments). But in case some bss allowed rate indexes are lower than the lowest bss basic rate, if the rate control selects a rate among the formers for its 1st rate control entry, rts_cts_rate_idx remains 0 and is not a basic rate index. This commit sets rts_cts_rate_idx to the lowest bss basic rate index in this situation. Note that the code assumes that lowest indexes == lowest bitrates. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: fix ieee80211_queue_stopped()Thomas Pedersen2013-04-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Johannes Berg notes mac80211 drivers which use ieee80211_queue_stopped() really only want to know if they previously requested a queue stop. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: provide SSID in IBSS modeMarek Puzyniak2013-04-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drivers need SSID in AP and IBSS mode. AP SSID is provided through BSS_CHANGED_SSID notification. There was no easy way to do the same for IBSS. In IBSS mode SSID is known but was not stored in BSS configuration. Extend the AP-mode functionality to also work in IBSS mode. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: always advertise STBC/MCSes even if no AP supportJohannes Berg2013-04-101-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Advertise STBC capabilities and MCS rates even if the AP doesn't support them. This has always been the right thing to do, but used to be problematic with some APs. Now WFA testing requires this so re-enable it, problematic APs would then presumably not pass the test and be fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: clear SSID when stopping APMarek Puzyniak2013-04-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When AP interface is stopped ssid_len in the BSS configuration isn't cleared which can confuse drivers when switching modes. Set the length to zero when stopping the AP interface. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: fix recalc_radar hwconf sync problemSimon Wunderlich2013-04-101-10/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | local->hw.conf maybe not be synced when recalcing whether radar is enabled, sometimes leaving radar enabled even if it's not neccesary anymore. Fix this by: * setting radar_enabled when creating the chanctx * turning radar_enabled off before destroying the last channel context Reported-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: stringify another plink stateThomas Pedersen2013-04-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "mac80211: stringify mesh peering events" missed an opportunity to print the peering state as a string. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | | mac80211: unset FC retry bit in mesh fwding pathThomas Pedersen2013-04-101-0/+1
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise forwarded frames would keep the retry bit set from the previous link transmission. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: make ieee802_11_parse_elems an inlineJohannes Berg2013-04-082-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | This (slightly) reduces the code size. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: don't start new netdev queues if driver stoppedJohannes Berg2013-04-081-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a new netdev (e.g. an AP VLAN) is created while the driver has queues stopped, the new netdev queues will be started even though they shouldn't. This will lead to frames accumulating on the internal mac80211 pending queues instead of properly being held on the netdev queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: replace some dead code by a warningJohannes Berg2013-04-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Given the (nested) switch statements, this code can't be reached, so make it warn instead of manipulating the carrier state which seems purposeful. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: don't fiddle with netdev queues in MLME codeJohannes Berg2013-04-081-24/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The netdev queues should always represent the state that the driver gave them, so fiddling with them isn't really appropriate in the mlme code. Also, since we stop queues for flushing now, this really isn't necessary any more. As the scan/offchannel code has also been modified to no longer do this a while ago, remove the outdated smp_mb() and comments about it. While at it, also add a pair of braces that was missing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: disable uAPSD if all ACs are under ACMAlexander Bondar2013-04-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's unlikely that an AP requires WMM mandatory admission control for all access categories, and if it does then we still transmit on the background AC without requesting admission. However, avoid using uAPSD in this case since the implementation could run into issues and might use other ACs etc. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: fix do_stop handling while suspendedJohannes Berg2013-04-081-25/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a device is unplugged while suspended, mac80211 is de-initialized and all interfaces are removed while no state is actually present in the driver. This can cause warnings and driver confusion. Fix this by reordering the do_stop code to not call the driver when it is suspended, i.e. when there's no state in the driver anyway. The previous patches removed a few corner cases in ROC and virtual monitor interfaces so that now this is safe to do and no state should be left over. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: destroy virtual monitor interface across suspendJohannes Berg2013-04-084-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has to be removed from the driver, but completely destroying it helps handle unplug of a device during suspend since then the channel context handling etc. doesn't have to happen later when it's removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: purge remain-on-channel items when suspendingJohannes Berg2013-04-084-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | They can't really be executed while suspended and could trigger work warnings, so abort all ROC items. When the system resumes the notifications about this will be delivered to userspace which can then act accordingly (though it will assume they were canceled/finished.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | | mac80211: remove outdated comment referring to master interfaceJohannes Berg2013-04-081-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The code now explicitly calls ieee80211_configure_filter() anyway, so nothing needs to be explained. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
OpenPOWER on IntegriCloud