summaryrefslogtreecommitdiffstats
path: root/net/mac80211/ieee80211_i.h
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: move packet flags into packetJohannes Berg2010-09-271-7/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8c0c709eea5cbab97fb464cd68b06f24acc58ee1 Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Nov 25 17:46:15 2009 +0100 mac80211: move cmntr flag out of rx flags moved the CMNTR flag into the skb RX flags for some aggregation cleanups, but this was wrong since the optimisation this flag tried to make requires that it is kept across the processing of multiple interfaces -- which isn't true for flags in the skb. The patch not only broke the optimisation, it also introduced a bug: under some (common!) circumstances the flag will be set on an already freed skb! However, investigating this in more detail, I found that most of the flags that we set should be per packet, _except_ for this one, due to a-MPDU processing. Additionally, the flags used for processing (currently just this one) need to be reset before processing a new packet. Since we haven't actually seen bugs reported as a result of the wrong flags handling (which is not too surprising -- the only real bug case I can come up with is an a-MSDU contained in an a-MPDU), I'll make a different fix for rc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Support multiple VIFS per AP in debugfs.Ben Greear2010-09-271-1/+1
| | | | | | | | | Create 'stations' sub-directory under each netdev:[vif-name] directory to hold all stations for that network device. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Add DS Parameter Set into Probe Request on 2.4 GHzJouni Malinen2010-09-241-1/+2
| | | | | | | | | | | | | | IEEE Std 802.11k-2008 added DS Parameter Set information element into Probe Request frames as an optional information on 2.4 GHz band (and mandatory, if radio measurements are enabled). This allows APs to filter out Probe Request frames that may be received from neighboring overlapping channels and by doing so, reduce the number of unnecessary frames in the air. Make mac80211 add this IE into Probe Request frames whenever the channel is known (i.e., whenever hwscan is not used). Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Filter ProbeReq SuppRates based on TX rate maskJouni Malinen2010-09-241-1/+1
| | | | | | | | | If the TX rate set has been masked, the removed rates can also be removed from the Supported Rates and Extended Supported Rates IEs in Probe Request frames. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make the beacon monitor available externallyLuis R. Rodriguez2010-09-161-0/+1
| | | | | | | | | | | | This will be used by other components next. The beacon monitor was added as of 2.6.34 so these fixes are applicable only to kernels >= 2.6.34. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add helper for reseting the connection monitorLuis R. Rodriguez2010-09-161-0/+1
| | | | | | | | | | | | This will be used in another place later. The connection monitor was added as of 2.6.35 so these fixes will be applicable to >= 2.6.35. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: only cancel software-based scans on suspendJohn W. Linville2010-09-011-0/+6
| | | | | | | | | Otherwise the hardware scan handler could access an invalid scan request structure. The driver should cancel any pending hardware scans during the suspend process anyway, so also add a warning if the hardware scan is still pending when the device resumes. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Do not generate CQM events based on first Beacon framesJouni Malinen2010-08-311-0/+7
| | | | | | | | | | The signal strength value in a single RX frame is not that reliable, so it is better to delay start of CQM events until there is a real average signal strength from more than a single Beacon frame available. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix offchannel queue stopJohannes Berg2010-08-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | Somebody noticed this problem, and I outlined to them how to fix it, but haven't heard back from them. So while I was adding the state field I figured I could use it to fix it. The problem, as I understand it, is that when we go offchannel while the driver has a queue stopped, the driver will likely start draining the queue and then enable it while offchannel. This in turn will enable the interface queue, and that leads to transmitting data frames on the wrong channel. Fix this by keeping track of offchannel status per interface, and not enabling the interface queues on interfaces that are offchannel when the driver enables a queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: support runtime interface type changesJohannes Berg2010-08-271-1/+13
| | | | | | | | | | | | | | | | | Add support to mac80211 for changing the interface type even when the interface is UP, if the driver supports it. To achieve this * add a new driver callback for switching, * split some of the interface up/down code out into new functions (do_open/do_stop), and * maintain an own __SDATA_RUNNING bit that will not be set during interface type, so that any other code doesn't use the interface. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow changing port control protocolJohannes Berg2010-08-271-0/+2
| | | | | | | | | | | Some vendor specified mechanisms for 802.1X-style functionality use a different protocol than EAP (even if EAP is vendor-extensible). Support this in mac80211 via the cfg80211 API for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow vendor specific cipher suitesJohannes Berg2010-08-271-0/+2
| | | | | | | | | | | Allow drivers to specify their own set of cipher suites to advertise vendor-specific ciphers. The driver is then required to implement hardware crypto offload for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow scan to complete from any contextJohannes Berg2010-08-271-0/+6
| | | | | | | | | | | | | | The ieee80211_scan_completed() function was a frequent source of potential deadlocks, since it is called by drivers but may call back into drivers, so drivers had to make sure to call it without any locks held, which frequently lead to more complex code in drivers. Avoid that problem by allowing the function to be called in any context, and queueing the actual work it does. Also update the documentation for it to indicate this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove unused scan expire defineJohannes Berg2010-08-271-6/+0
| | | | | | | | | Since cfg80211 manages the BSS list completely, this define hasn't been used for a long time and will never be used again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211/mac80211: extensible frame processingJohannes Berg2010-08-241-0/+1
| | | | | | | | | | | | | | | Allow userspace to register for more than just action frames by giving the frame subtype, and make it possible to use this in various modes as well. With some tweaks and some added functionality this will, in the future, also be usable in AP mode and be able to replace the cooked monitor interface currently used in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow drivers to request SM PS mode changeJohannes Berg2010-08-161-1/+5
| | | | | | | | | | | | | Sometimes drivers have more information than the stack about how their antennas/chains are used, and may require that the SM PS mode be changed. This could happen, for example, when detecting that the user disconnected an antenna. Thus this patch introduces API to allow drivers to request SM PS mode changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: per interface idle notificationJohannes Berg2010-08-161-0/+3
| | | | | | | | | Sometimes we don't just need to know whether or not the device is idle, but also per interface. This adds that reporting capability to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: AMPDU rx reorder timeout timerChristian Lamparter2010-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | This patch introduces a new timer, which will release queued-up MPDUs from the reorder buffer, whenever they've waited for more than HT_RX_REORDER_BUF_TIMEOUT (which is at around 100 ms). The advantage of having a dedicated timer, instead of relying on a constant stream of freshly arriving aMPDUs to release the old ones, is particularly observable when even a small fraction of MPDUs are forever lost at low network speeds. Previously under these circumstances frames would become stuck in the reorder buffer and the network stack of both HT peers throttled back, instead of revving up and gunning the pipes. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: unify scan and work mutexesJohannes Berg2010-08-161-2/+2
| | | | | | | | | | | | | Having both scan and work mutexes is not just a bit too fine grained, it also creates issues when there's code that needs both since they then need to be acquired in the right order, which can be hard to do. Therefore, use just a single mutex for both. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: support use of NAPI for bottom-half processingJohn W. Linville2010-08-161-0/+5
| | | | | | | | | | | | | | This patch implement basic infrastructure to support use of NAPI by mac80211-based hardware drivers. Because mac80211 devices can support multiple netdevs, a dummy netdev is used for interfacing with the NAPI code in the core of the network stack. That structure is hidden from the hardware drivers, but the actual napi_struct is exposed in the ieee80211_hw structure so that the poll routines in drivers can retrieve that structure. Hardware drivers can also specify their own weight value for NAPI polling. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow drivers to request DTIM periodJohannes Berg2010-07-291-0/+1
| | | | | | | | | | | Some features require knowing the DTIM period before associating. This implements the ability to wait for a beacon in mac80211 before assoc to provide this value. It is optional since most likely not all drivers will need this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-07-271-1/+1
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-commands.h
| * Merge branch 'master' of ↵David S. Miller2010-07-011-0/+2
| |\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/libertas/host.h
| * \ Merge branch 'master' of ↵David S. Miller2010-06-171-28/+38
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * \ \ Merge branch 'master' of ↵David S. Miller2010-06-111-2/+5
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
| * | | | net: use __packed annotationEric Dumazet2010-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cleanup patch. Use new __packed annotation in net/ and include/ (except netfilter) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | mac80211: proper IBSS lockingJohannes Berg2010-07-211-5/+2
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IBSS has never had locking, instead relying on some memory barriers etc. That's hard to get right, and I think we had it wrong too until the previous patch. Since this is not performance sensitive, it doesn't make sense to have the maintenance overhead of that, so add proper locking. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | mac80211: Add interface for driver to temporarily disable dynamic psJuuso Oikarinen2010-06-211-0/+2
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This mechanism introduced in this patch applies (at least) for hardware designs using a single shared antenna for both WLAN and BT. In these designs, the antenna must be toggled between WLAN and BT. In those hardware, managing WLAN co-existence with Bluetooth requires WLAN full power save whenever there is Bluetooth activity in order for WLAN to be able to periodically relinquish the antenna to be used for BT. This is because BT can only access the shared antenna when WLAN is idle or asleep. Some hardware, for instance the wl1271, are able to indicate to the host whenever there is BT traffic. In essence, the hardware will send an indication to the host whenever there is, for example, SCO traffic or A2DP traffic, and will send another indication when the traffic is over. The hardware gets information of Bluetooth traffic via hardware co-existence control lines - these lines are used to negotiate the shared antenna ownership. The hardware will give the antenna to BT whenever WLAN is sleeping. This patch adds the interface to mac80211 to facilitate temporarily disabling of dynamic power save as per request of the WLAN driver. This interface will immediately force WLAN to full powersave, hence allowing BT coexistence as described above. In these kind of shared antenna desings, when WLAN powersave is fully disabled, Bluetooth will not work simultaneously with WLAN at all. This patch does not address that problem. This interface will not change PSM state, so if PSM is disabled it will remain so. Solving this problem requires knowledge about BT state, and is best done in user-space. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: Fix ps-qos network latency handlingJuuso Oikarinen2010-06-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ps-qos latency handling is broken. It uses predetermined latency values to select specific dynamic PS timeouts. With common AP configurations, these values overlap with beacon interval and are therefore essentially useless (for network latencies less than the beacon interval, PSM is disabled.) This patch remedies the problem by replacing the predetermined network latency values with one high value (1900ms) which is used to go trigger full psm. For backwards compatibility, the value 2000ms is still mapped to a dynamic ps timeout of 100ms. Currently also the mac80211 internal value for storing user space configured dynamic PSM values is incorrectly in the driver visible ieee80211_conf struct. Move it to the ieee80211_local struct. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: Fix circular locking dependency in ARP filter handlingJuuso Oikarinen2010-06-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: Set basic rates while joining ibss networkTeemu Paasikivi2010-06-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to nl80211 and mac80211 to set basic rates when joining/creating ibss network. Original patch was posted by Johannes Berg on the linux-wireless posting list. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: defer RX agg session teardown to workJohannes Berg2010-06-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we want the code to be able to sleep in the future, it must not be called from the timer directly. To prepare, move it out into the aggregation work. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: move BA session workJohannes Berg2010-06-141-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the block-ack session works into common code, since it will be needed for RX agg too in the next patches. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: make TX aggregation start/stop request asyncJohannes Berg2010-06-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the driver or rate control requests starting or stopping an aggregation session, that currently causes a direct callback into the driver, which could potentially cause locking problems. Also, the functions need to be callable from contexts that cannot sleep, and thus will interfere with making the ampdu_action callback sleeping. To address these issues, add a new work item for each station that will process any start or stop requests out of line. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: refcount aggregation queue stopJohannes Berg2010-06-141-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mac80211 currently maintains the ampdu_lock to avoid starting a queue due to one aggregation session while another aggregation session needs the queue stopped. We can do better, however, and instead refcount the queue stops for this particular purpose, thus removing the need for the lock. This will help making ampdu_action able to sleep. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: remove non-irqsafe aggregation callbacksJohannes Berg2010-06-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The non-irqsafe aggregation start/stop done callbacks are currently only used by ath9k_htc, and can cause callbacks into the driver again. This might lead to locking issues, which will only get worse as we modify locking. To avoid trouble, remove the non-irqsafe versions and change ath9k_htc to use those instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: use RCU for TX aggregationJohannes Berg2010-06-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we allocate some memory for each TX aggregation session and additionally keep a state bitmap indicating the state it is in. By using RCU to protect the pointer, moving the state into the structure and some locking trickery we can avoid locking when the TX agg session is fully operational. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: move aggregation callback processingJohannes Berg2010-06-141-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the aggregation callback processing to the per-sdata skb queue and a work function rather than the tasklet. Unfortunately, this means that it extends the pkt_type hack to that skb queue. However, it will enable making ampdu_action API changes gradually, my current plan is to get rid of this again by forcing drivers to only return from ampdu_action() when everything is done, thus removing the callbacks completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: pull mgmt frame rx into rx handlerJohannes Berg2010-06-141-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some code is duplicated between ibss, mesh and managed mode regarding the queueing of management frames. Since all modes now use a common skb queue and a common work function, we can pull the queueing code into the rx handler directly and remove the duplicated length checks etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: use common work functionJohannes Berg2010-06-141-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even with the previous patch, IBSS, managed and mesh modes all attach their own work function to the shared work struct, which means some duplicated code. Change that to only have a frame processing function and a further work function for each of them and share some common code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: use common work structJohannes Berg2010-06-141-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IBSS, managed and mesh modes all have their own work struct, and in the future we want to also use it in other modes to process frames from the now common skb queue. This also makes the skb queue and work safe to use from other interface types. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: use common skb queueJohannes Berg2010-06-141-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IBSS, managed and mesh modes all have an skb queue, and in the future we want to also use it in other modes, so make them all use a common skb queue already. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | cfg80211/mac80211: allow action frame TX/RX in IBSSJohannes Berg2010-06-141-5/+0
| |/ |/| | | | | | | | | | | | | | | | | | | When in IBSS mode, currently action frame TX and RX cannot be used. Allow using it to talk to any peer, or for public action frames. Also, while at it, restructure the code in mac80211 to make it easier to add this for other interface types in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: simplify key lockingJohannes Berg2010-06-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Since I recently made station management able to sleep, I can now rework key management as well; since it will no longer need a spinlock and can also use a mutex instead, a bunch of code to allow drivers' set_key to sleep while key management is protected by a spinlock can now be removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: Add support for hardware ARP query filteringJuuso Oikarinen2010-06-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some hardware allow extended filtering of ARP frames not intended for the host. To perform such filtering, the hardware needs to know the current IP address(es) of the host, bound to its interface. Add support for ARP filtering to mac80211 by adding a new op to the driver interface, allowing to configure the current IP addresses. This op is called upon association with the currently configured address(es), and when associated whenever the IP address(es) change. This patch adds configuration of IPv4 addresses only, as IPv6 addresses don't need ARP filtering. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | cfg80211: make action channel type optionalJohannes Berg2010-06-021-0/+1
|/ | | | | | | | | | | | | | | When sending action frames, we want to verify that we do that on the correct channel. However, checking the channel type in addition can get in the way, since the channel type could change on the fly during an association, and it's not useful to have the channel type anyway since it has no effect on the transmission. Therefore, make it optional to specify so that if wanted, it can still be checked, but is not required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-05-171-1/+2
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * mac80211: add offload channel switch supportJohannes Berg2010-05-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for offloading the channel switch operation to devices that support such, typically by having specific firmware API for it. The reasons for this could be that the firmware provides better timing or that regulatory enforcement done by the device requires special handling of CSAs. In order to allow drivers to specify the timing to the device, the new channel_switch callback will pass through the received frame's mactime, where available. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-05-111-1/+15
|\ \ | |/ | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/ath/ar9170/main.c
| * mac80211: improve HT channel handlingJohannes Berg2010-05-071-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, when one interface switches HT mode, all others will follow along. This is clearly undesirable, since the new one might switch to no-HT while another one is operating in HT. Address this issue by keeping track of the HT mode per interface, and allowing only changes that are compatible, i.e. switching into HT40+ is not possible when another interface is in HT40-, in that case the second one needs to fall back to HT20. Also, to allow drivers to know what's going on, store the per-interface HT mode (channel type) in the virtual interface's bss_conf. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud