summaryrefslogtreecommitdiffstats
path: root/net/mac80211/ht.c
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: skip HT parsing if HW does not support HTChristian Lamparter2010-07-161-1/+1
| | | | | | | | | This patch will also fix the odd freeze which occurred when minstrel_ht connects to an 802.11n network with legacy hardware. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: change TX aggregation lockingJohannes Berg2010-06-141-6/+2
| | | | | | | | | | | | | To prepare for allowing drivers to sleep in ampdu_action, change the locking in the TX aggregation code to use the mutex the RX part already uses. The spinlock is still necessary around some code to avoid races with TX, but now we can also synchronize_net() to avoid getting an inconsistent sequence number. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: change RX aggregation lockingJohannes Berg2010-06-141-1/+5
| | | | | | | | | | | | | To prepare for allowing drivers to sleep in ampdu_action, change the locking in the RX aggregation code to use a mutex, so that it would already allow drivers to sleep. But explicitly disable BHs around the callback for now since the TX part cannot yet sleep, and drivers' locking might require it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: defer RX agg session teardown to workJohannes Berg2010-06-141-0/+5
| | | | | | | | | | Since we want the code to be able to sleep in the future, it must not be called from the timer directly. To prepare, move it out into the aggregation work. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move BA session workJohannes Berg2010-06-141-0/+32
| | | | | | | | | Move the block-ack session works into common code, since it will be needed for RX agg too in the next patches. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make TX aggregation start/stop request asyncJohannes Berg2010-06-141-0/+2
| | | | | | | | | | | | | | | | | When the driver or rate control requests starting or stopping an aggregation session, that currently causes a direct callback into the driver, which could potentially cause locking problems. Also, the functions need to be callable from contexts that cannot sleep, and thus will interfere with making the ampdu_action callback sleeping. To address these issues, add a new work item for each station that will process any start or stop requests out of line. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use RCU for TX aggregationJohannes Berg2010-06-141-7/+2
| | | | | | | | | | | | | Currently we allocate some memory for each TX aggregation session and additionally keep a state bitmap indicating the state it is in. By using RCU to protect the pointer, moving the state into the structure and some locking trickery we can avoid locking when the TX agg session is fully operational. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove ieee80211_sta_stop_rx_ba_sessionJohannes Berg2010-04-071-2/+1
| | | | | | | | | | All callers of ieee80211_sta_stop_rx_ba_session can just call __ieee80211_stop_rx_ba_session instead because they already have the station struct, so do that and remove ieee80211_sta_stop_rx_ba_session. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵David S. Miller2009-12-251-3/+50
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * mac80211: enable spatial multiplexing powersaveJohannes Berg2009-12-221-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable spatial multiplexing in mac80211 by telling the driver what to do and, where necessary, sending action frames to the AP to update the requested SMPS mode. Also includes a trivial implementation for hwsim that just logs the requested mode. For now, the userspace interface is in debugfs only, and let you toggle the requested mode at any time. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: reduce reliance on netdevJohannes Berg2009-12-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For bluetooth 3, we will most likely not have a netdev for a virtual interface (sdata), so prepare for that by reducing the reliance on having a netdev. This patch moves the name and address fields into the sdata struct and uses them from there all over. Some work is needed to keep them sync'ed, but that's not a lot of work and in slow paths anyway. In doing so, this also reduces the number of pointer dereferences in many places, because of things like sdata->dev->dev_addr becoming sdata->vif.addr. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: fix peer HT capabilitiesJohannes Berg2009-12-211-3/+22
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed yesterday, because Jeff had noticed a speed regression, cf. bug http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138 that the SM PS settings for peers were wrong. Instead of overwriting the SM PS settings with the local bits, we need to keep the remote bits. The bug was part of the original HT code from over two years ago, but unfortunately nobody noticed that it makes no sense -- we shouldn't be overwriting the peer's setting with our own but rather keep it intact when masking the peer capabilities with our own. While fixing that, I noticed that the masking of capabilities is completely useless for most of the bits, so also fix those other bits. Finally, I also noticed that PSMP_SUPPORT no longer exists in the final 802.11n version, so also remove that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵David S. Miller2009-12-011-4/+3
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/ht.c
| * mac80211: fix spurious delBA handlingJohannes Berg2009-11-301-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lennert Buytenhek noticed that delBA handling in mac80211 was broken and has remotely triggerable problems, some of which are due to some code shuffling I did that ended up changing the order in which things were done -- this was commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg <johannes@sipsolutions.net> Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session and other parts were already present in the original commit d92684e66091c0f0101819619b315b4bb8b5bcc5 Author: Ron Rindjunsky <ron.rindjunsky@intel.com> Date: Mon Jan 28 14:07:22 2008 +0200 mac80211: A-MPDU Tx add delBA from recipient support The first problem is that I moved a BUG_ON before various checks -- thereby making it possible to hit. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is != IDLE. The second problem isn't easily exploitable but there's a race condition due to unconditionally setting the state to OPERATIONAL when a delBA frame is received, even when no aggregation session was ever initiated. All the drivers accept stopping the session even then, but that opens a race window where crashes could happen before the driver accepts it. Right now, a WARN_ON may happen with non-HT drivers, while the race opens only for HT drivers. For this case, there are two things necessary to fix it: 1) don't process spurious delBA frames, and be more careful about the session state; don't drop the lock 2) HT drivers need to be prepared to handle a session stop even before the session was really started -- this is true for all drivers (that support aggregation) but iwlwifi which can be fixed easily. The other HT drivers (ath9k and ar9170) are behaving properly already. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: remove encrypt parameter from ieee80211_tx_skbJohannes Berg2009-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | Since the flags moved into skb->cb, there's no longer a need to have the encrypt bool passed into the function, anyone who requires it set to 0 (false) can just set the flag directly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: convert aggregation to operate on vifs/stasJohannes Berg2009-11-181-2/+1
|/ | | | | | | | | | | | The entire aggregation code currently operates on the hw pointer and station addresses, but that needs to change to make stations purely per-vif; As one step preparing for that make the aggregation code callable with the station, or by the combination of virtual interface and station address. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix reason code output endiannessJohannes Berg2009-10-301-1/+1
| | | | | | | | | When HT debugging is enabled and we receive a DelBA frame we print out the reason code in the wrong byte order. Fix that so we don't get weird values printed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: clean up includesJohannes Berg2009-04-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move ieee80211_enable_ht function to mlme.cJohannes Berg2009-04-221-83/+0
| | | | | | | | | It really belongs into that file since it is only relevant for managed mode. Move 1:1, not even whitespace changes, but make it static and remove from header file. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Extend the rate control API with an update callbackSujith2009-02-271-0/+13
| | | | | | | | | | | | | | The AP can switch dynamically between 20/40 Mhz channel width, in which case we switch the local operating channel, but the rate control algorithm is not notified. This patch adds a new callback to indicate such changes to the RC algorithm. Currently, HT channel width change is notified, but this callback can be used to indicate any new requirements that might come up later on. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: split IBSS/managed codeJohannes Berg2009-02-271-3/+3
| | | | | | | | | | | | | | | | | This patch splits out the ibss code and data from managed (station) mode. The reason to do this is to better separate the state machines, and have the code be contained better so it gets easier to determine what exactly a given change will affect, that in turn makes it easier to understand. This is quite some churn, especially because I split sdata->u.sta into sdata->u.mgd and sdata->u.ibss, but I think it's easier to maintain that way. I've also shuffled around some code -- null function sending is only applicable to managed interfaces so put that into that file, some other functions are needed from various places so put them into util, and also rearranged the prototypes in ieee80211_i.h accordingly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: further cleanups to stopping BA sessionsJohannes Berg2009-02-131-6/+3
| | | | | | | | Essentially consisting of passing the sta_info pointer around, instead of repeatedly doing hash lookups. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up BA session teardownJohannes Berg2009-02-131-4/+4
| | | | | | | | | The sta_info pointer can very well be passed to ieee80211_sta_tear_down_BA_sessions, this will later allow us to pass it through even further. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: restrict aggregation to supported interface modesJohannes Berg2009-02-131-1/+2
| | | | | | | | | | We can only support aggregation on AP/STA right now. HT isn't defined for IBSS, WDS or MESH. In the WDS/MESH cases it's not clear what to put into the IBSS field, and we don't handle that in the code at all. Also fix the code to handle VLAN correctly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: restructure HT codeJohannes Berg2009-02-131-856/+11
| | | | | | | | Create two new files, agg-tx.c and agg-rx.c to make it clearer which code is common (ht.c) and which is specific (agg-*.c). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: cleanup kmalloc/memset -> kcallocWei Yongjun2009-01-291-3/+1
| | | | | | | Transform calls kmalloc/memset to a single kcalloc. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: 802.11w - Do not force Action frames to disable encryptionJouni Malinen2009-01-291-3/+3
| | | | | | | | | | When sending out Action frames, allow ieee80211_tx_skb() to send them without enforcing do_not_encrypt. These frames will be encrypted if MFP has been negotiated. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up channel type configJohannes Berg2009-01-291-3/+5
| | | | | | | | | | | The channel_type really doesn't need to be the only member in a new structure, so remove the struct. Additionally, remove the _CONF_CHANGE_HT flag and use _CONF_CHANGE_CHANNEL when the channel type changes, since that's enough of a change to require reprogramming the hardware anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: no need for ht.enabledLuis R. Rodriguez2009-01-291-2/+1
| | | | | | | | We can simply use conf_is_ht() check where needed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix "‘ret’ may be used uninitialized" warningJohn W. Linville2009-01-131-1/+1
| | | | | | | net/mac80211/ht.c: In function ‘ieee80211_start_tx_ba_session’: net/mac80211/ht.c:472: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Fix HT channel selectionSujith2008-12-191-11/+24
| | | | | | | | | | | | | HT management is done differently for AP and STA modes, unify to just the ->config() callback since HT is fundamentally a PHY property and cannot be per-BSS. Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote the channel type ( NO_HT, HT20, HT40+, HT40- ). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Use the HT capabilities from the IE instead of the station's caps.Sujith2008-11-251-1/+1
| | | | | | Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Add a new event in ieee80211_ampdu_mlme_actionSujith2008-11-101-1/+9
| | | | | | | | | Send a notification to the driver on succesful reception of an ADDBA response, add IEEE80211_AMPDU_TX_RESUME for this purpose. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Re-enable aggregationSujith2008-10-311-25/+35
| | | | | | | | | | | | | | Wireless HW without any dedicated queues for aggregation do not need the ampdu_queues mechanism present right now in mac80211. Since mac80211 is still incomplete wrt TX MQ changes, do not allow aggregation sessions for drivers that set ampdu_queues. This is only an interim hack until Intel fixes the requeue issue. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: rewrite HT handlingJohannes Berg2008-10-311-106/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HT handling has the following deficiencies, which I've (partially) fixed: * it always uses the AP info even if there is no AP, hence has no chance of working as an AP * it pretends to be HW config, but really is per-BSS * channel sanity checking is left to the drivers * it generally lets the driver control too much HT enabling is still wrong with this patch if you have more than one virtual STA mode interface, but that never happens currently. Once WDS, IBSS or AP/VLAN gets HT capabilities, it will also be wrong, see the comment in ieee80211_enable_ht(). Additionally, this fixes a number of bugs: * mac80211: ieee80211_set_disassoc doesn't notify the driver any more since the refactoring * iwl-agn-rs: always uses the HT capabilities from the wrong stuff mac80211 gives it rather than the actual peer STA * ath9k: a number of bugs resulting from the broken HT API I'm not entirely happy with putting the HT capabilities into struct ieee80211_sta as restricted to our own HT TX capabilities, but I see no cleaner solution for now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* 802.11: clean up/fix HT supportJohannes Berg2008-10-311-22/+129
| | | | | | | | | | | | | | | | | | | | This patch cleans up a number of things: * the unusable definition of the HT capabilities/HT information information elements * variable names that are hard to understand * mac80211: move ieee80211_handle_ht to ht.c and remove the unused enable_ht parameter * mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht * mac80211: fix bug with casting the result of ieee80211_bss_get_ie to an information element _contents_ rather than the whole element, add size checking (another out-of-bounds access bug fixed!) * mac80211: remove some unused return values in favour of BUG_ON checking * a few minor other things Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: convert to %pM away from print_macJohannes Berg2008-10-271-26/+16
| | | | | | | | Also remove a few stray DECLARE_MAC_BUF that were no longer used at all. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: share STA information with driverJohannes Berg2008-09-151-11/+11
| | | | | | | | | | | This patch changes mac80211 to share some more data about stations with drivers. Should help iwlwifi and ath9k when they get around to updating, and might also help with implementing rate control algorithms without internals. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use nl80211 interface typesJohannes Berg2008-09-151-3/+3
| | | | | | | | | | There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move frame TX functionJohannes Berg2008-09-111-4/+4
| | | | | | | | | The ieee80211_sta_tx function isn't MLME code any more, it's getting used by a lot of code. Move it to utils and rename it to ieee80211_tx_skb. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make BA session handling independent of STA modeJohannes Berg2008-09-111-6/+297
| | | | | | | | | | | The aggregation handling isn't dependent on anything related to our STA-mode implementation, and doesn't need to depend on it for frame processing. This patch moves the relevant code to ht.c and adds a hook in rx.c. For now, the relevant action frames are only processed in STA/IBSS modes, but that's now something we can easily change. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move some HT code out of main.cJohannes Berg2008-09-111-2/+375
| | | | | | | | Now that I've created ht.c, I can move the aggregation code from main.c into it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move some HT code out of mlme.cJohannes Berg2008-09-111-0/+328
Some of the HT code in mlme.c is misplaced: * constants/definitions belong to the ieee80211.h header * code being used in other modes as well shouldn't be there Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud