summaryrefslogtreecommitdiffstats
path: root/net/ipv6
Commit message (Collapse)AuthorAgeFilesLines
* net: reevalulate autoflowlabel setting after sysctl settingShaohua Li2017-12-213-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901f7c4 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Honor specified parameters in fibmatch lookupIdo Schimmel2017-12-211-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, parameters such as oif and source address are not taken into account during fibmatch lookup. Example (IPv4 for reference) before patch: $ ip -4 route show 192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1 198.51.100.0/24 dev dummy1 proto kernel scope link src 198.51.100.1 $ ip -6 route show 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy0 proto kernel metric 256 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium $ ip -4 route get fibmatch 192.0.2.2 oif dummy0 192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1 $ ip -4 route get fibmatch 192.0.2.2 oif dummy1 RTNETLINK answers: No route to host $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium After: $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1 RTNETLINK answers: Network is unreachable The problem stems from the fact that the necessary route lookup flags are not set based on these parameters. Instead of duplicating the same logic for fibmatch, we can simply resolve the original route from its copy and dump it instead. Fixes: 18c3a61c4264 ("net: ipv6: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: get the min mtu properly in ip6_tnl_xmitXin Long2017-12-191-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now it's using IPV6_MIN_MTU as the min mtu in ip6_tnl_xmit, but IPV6_MIN_MTU actually only works when the inner packet is ipv6. With IPV6_MIN_MTU for ipv4 packets, the new pmtu for inner dst couldn't be set less than 1280. It would cause tx_err and the packet to be dropped when the outer dst pmtu is close to 1280. Jianlin found it by running ipv4 traffic with the topo: (client) gre6 <---> eth1 (route) eth2 <---> gre6 (server) After changing eth2 mtu to 1300, the performance became very low, or the connection was even broken. The issue also affects ip4ip6 and ip6ip6 tunnels. So if the inner packet is ipv4, 576 should be considered as the min mtu. Note that for ip4ip6 and ip6ip6 tunnels, the inner packet can only be ipv4 or ipv6, but for gre6 tunnel, it may also be ARP. This patch using 576 as the min mtu for non-ipv6 packet works for all those cases. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_gre: remove the incorrect mtu limit for ipgre tapXin Long2017-12-191-0/+1
| | | | | | | | | The same fix as the patch "ip_gre: remove the incorrect mtu limit for ipgre tap" is also needed for ip6_gre. Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: icmp6: Allow icmp messages to be looped backBrendan McGrath2017-12-161-0/+1
| | | | | | | | | | | | | | | | | | | | | One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router. A Multicast Router will listen on address ff02::16 for MLDv2 messages. Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard. This results in the packet being looped back but discarded before being delivered to the Multicast Router. This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router. Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2017-12-132-2/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter fixes for net The follow patchset contains Netfilter fixes for your net tree, they are: 1) Fix compilation warning in x_tables with clang due to useless redundant reassignment, from Colin Ian King. 2) Add bugtrap to net_exit to catch uninitialized lists, patch from Vasily Averin. 3) Fix out of bounds memory reads in H323 conntrack helper, this comes with an initial patch to remove replace the obscure CHECK_BOUND macro as a dependency. From Eric Sesterhenn. 4) Reduce retransmission timeout when window is 0 in TCP conntrack, from Florian Westphal. 6) ctnetlink clamp timeout to INT_MAX if timeout is too large, otherwise timeout wraps around and it results in killing the entry that is being added immediately. 7) Missing CAP_NET_ADMIN checks in cthelper and xt_osf, due to no netns support. From Kevin Cernekee. 8) Missing maximum number of instructions checks in xt_bpf, patch from Jann Horn. 9) With no CONFIG_PROC_FS ipt_CLUSTERIP compilation breaks, patch from Arnd Bergmann. 10) Missing netlink attribute policy in nftables exthdr, from Florian Westphal. 11) Enable conntrack with IPv6 MASQUERADE rules, as a357b3f80bc8 should have done in first place, from Konstantin Khlebnikov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * netfilter: ip6t_MASQUERADE: add dependency on conntrack moduleKonstantin Khlebnikov2017-12-111-1/+7
| | | | | | | | | | | | | | | | | | | | After commit 4d3a57f23dec ("netfilter: conntrack: do not enable connection tracking unless needed") conntrack is disabled by default unless some module explicitly declares dependency in particular network namespace. Fixes: a357b3f80bc8 ("netfilter: nat: add dependencies on conntrack module") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: remove redundant assignment to eColin Ian King2017-11-201-1/+0
| | | | | | | | | | | | | | | | | | | | | | The assignment to variable e is redundant since the same assignment occurs just a few lines later, hence it can be removed. Cleans up clang warning for arp_tables, ip_tables and ip6_tables: warning: Value stored to 'e' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | ipv6: mcast: better catch silly mtu valuesEric Dumazet2017-12-131-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzkaller reported crashes in IPv6 stack [1] Xin Long found that lo MTU was set to silly values. IPv6 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in mld code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv6 minimal MTU. [1] skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801db307508 EFLAGS: 00010286 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540 FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:109 [inline] skb_put+0x181/0x1c0 net/core/skbuff.c:1694 add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695 add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817 mld_send_cr net/ipv6/mcast.c:1903 [inline] mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448 call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x29d/0xbb2 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d3/0x210 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp md5sig: Use skb's saddr when replying to an incoming segmentChristoph Paasch2017-12-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f9722922 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | adding missing rcu_read_unlock in ipxip6_rcvNikita V. Shirokov2017-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") introduced new exit point in ipxip6_rcv. however rcu_read_unlock is missing there. this diff is fixing this v1->v2: instead of doing rcu_read_unlock in place, we are going to "drop" section (to prevent skb leakage) Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()Eric Dumazet2017-12-031-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | James Morris reported kernel stack corruption bug [1] while running the SELinux testsuite, and bisected to a recent commit bffa72cf7f9d ("net: sk_buff rbnode reorg") We believe this commit is fine, but exposes an older bug. SELinux code runs from tcp_filter() and might send an ICMP, expecting IP options to be found in skb->cb[] using regular IPCB placement. We need to defer TCP mangling of skb->cb[] after tcp_filter() calls. This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very similar way we added them for IPv6. [1] [ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet [ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5 [ 339.822505] [ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15 [ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017 [ 339.885060] Call Trace: [ 339.896875] <IRQ> [ 339.908103] dump_stack+0x63/0x87 [ 339.920645] panic+0xe8/0x248 [ 339.932668] ? ip_push_pending_frames+0x33/0x40 [ 339.946328] ? icmp_send+0x525/0x530 [ 339.958861] ? kfree_skbmem+0x60/0x70 [ 339.971431] __stack_chk_fail+0x1b/0x20 [ 339.984049] icmp_send+0x525/0x530 [ 339.996205] ? netlbl_skbuff_err+0x36/0x40 [ 340.008997] ? selinux_netlbl_err+0x11/0x20 [ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230 [ 340.035529] ? security_sock_rcv_skb+0x3b/0x50 [ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0 [ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0 [ 340.074562] ? tcp_filter+0x2c/0x40 [ 340.086400] ? tcp_v4_rcv+0x820/0xa20 [ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0 [ 340.111279] ? ip_local_deliver+0x6f/0xe0 [ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0 [ 340.135523] ? ip_rcv_finish+0xdb/0x3a0 [ 340.147442] ? ip_rcv+0x27c/0x3c0 [ 340.158668] ? inet_del_offload+0x40/0x40 [ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900 [ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80 [ 340.195282] ? __netif_receive_skb+0x18/0x60 [ 340.207288] ? process_backlog+0x95/0x140 [ 340.218948] ? net_rx_action+0x26c/0x3b0 [ 340.230416] ? __do_softirq+0xc9/0x26a [ 340.241625] ? do_softirq_own_stack+0x2a/0x40 [ 340.253368] </IRQ> [ 340.262673] ? do_softirq+0x50/0x60 [ 340.273450] ? __local_bh_enable_ip+0x57/0x60 [ 340.285045] ? ip_finish_output2+0x175/0x350 [ 340.296403] ? ip_finish_output+0x127/0x1d0 [ 340.307665] ? nf_hook_slow+0x3c/0xb0 [ 340.318230] ? ip_output+0x72/0xe0 [ 340.328524] ? ip_fragment.constprop.54+0x80/0x80 [ 340.340070] ? ip_local_out+0x35/0x40 [ 340.350497] ? ip_queue_xmit+0x15c/0x3f0 [ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90 [ 340.372484] ? __skb_clone+0x2e/0x130 [ 340.382633] ? tcp_transmit_skb+0x558/0xa10 [ 340.393262] ? tcp_connect+0x938/0xad0 [ 340.403370] ? ktime_get_with_offset+0x4c/0xb0 [ 340.414206] ? tcp_v4_connect+0x457/0x4e0 [ 340.424471] ? __inet_stream_connect+0xb3/0x300 [ 340.435195] ? inet_stream_connect+0x3b/0x60 [ 340.445607] ? SYSC_connect+0xd9/0x110 [ 340.455455] ? __audit_syscall_entry+0xaf/0x100 [ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0 [ 340.476636] ? __audit_syscall_exit+0x209/0x290 [ 340.487151] ? SyS_connect+0xe/0x10 [ 340.496453] ? do_syscall_64+0x67/0x1b0 [ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: James Morris <james.l.morris@oracle.com> Tested-by: James Morris <james.l.morris@oracle.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sit: update frag_off infoHangbin Liu2017-11-301-0/+1
| | | | | | | | | | | | | | | | | | | | After parsing the sit netlink change info, we forget to update frag_off in ipip6_tunnel_update(). Fix it by assigning frag_off with new value. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: remove buggy call to tcp_v6_restore_cb()Eric Dumazet2017-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tcp_v6_send_reset() expects to receive an skb with skb->cb[] layout as used in TCP stack. MD5 lookup uses tcp_v6_iif() and tcp_v6_sdif() and thus TCP_SKB_CB(skb)->header.h6 This patch probably fixes RST packets sent on behalf of a timewait md5 ipv6 socket. Before Florian patch, tcp_v6_restore_cb() was needed before jumping to no_tcp_socket label. Fixes: 271c3b9b7bda ("tcp: honour SO_BINDTODEVICE for TW_RST case too") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2017-11-255-34/+31
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
| * | treewide: setup_timer() -> timer_setup() (2 field)Kees Cook2017-11-211-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
| * | treewide: setup_timer() -> timer_setup()Kees Cook2017-11-213-28/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
| * | treewide: Switch DEFINE_TIMER callbacks to struct timer_list *Kees Cook2017-11-211-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes all DEFINE_TIMER() callbacks to use a struct timer_list pointer instead of unsigned long. Since the data argument has already been removed, none of these callbacks are using their argument currently, so this renames the argument to "unused". Done using the following semantic patch: @match_define_timer@ declarer name DEFINE_TIMER; identifier _timer, _callback; @@ DEFINE_TIMER(_timer, _callback); @change_callback depends on match_define_timer@ identifier match_define_timer._callback; type _origtype; identifier _origarg; @@ void -_callback(_origtype _origarg) +_callback(struct timer_list *unused) { ... } Signed-off-by: Kees Cook <keescook@chromium.org>
* | net: accept UFO datagrams from tuntap and packetWillem de Bruijn2017-11-242-3/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 939912216fa8 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ipv6: Fixup device for anycast routes during copyDavid Ahern2017-11-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Florian reported a breakage with anycast routes due to commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). Prior to this commit anycast routes were added against the loopback device causing repetitive route entries with no insight into why they existed. e.g.: $ ip -6 ro ls table local type anycast anycast 2001:db8:1:: dev lo proto kernel metric 0 pref medium anycast 2001:db8:2:: dev lo proto kernel metric 0 pref medium anycast fe80:: dev lo proto kernel metric 0 pref medium anycast fe80:: dev lo proto kernel metric 0 pref medium The point of commit 4832c30d5458 is to add the routes using the device with the address which is causing the route to be added. e.g.,: $ ip -6 ro ls table local type anycast anycast 2001:db8:1:: dev eth1 proto kernel metric 0 pref medium anycast 2001:db8:2:: dev eth2 proto kernel metric 0 pref medium anycast fe80:: dev eth2 proto kernel metric 0 pref medium anycast fe80:: dev eth1 proto kernel metric 0 pref medium For traffic to work as it did before, the dst device needs to be switched to the loopback when the copy is created similar to local routes. Fixes: 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: Do not consider linkdown nexthops during multipathIdo Schimmel2017-11-241-0/+5
|/ | | | | | | | | | | | | | | | | | When the 'ignore_routes_with_linkdown' sysctl is set, we should not consider linkdown nexthops during route lookup. While the code correctly verifies that the initially selected route ('match') has a carrier, it does not perform the same check in the subsequent multipath selection, resulting in a potential packet loss. In case the chosen route does not have a carrier and the sysctl is set, choose the initially selected route. Fixes: 35103d11173b ("net: ipv6 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* gre6: use log_ecn_error module parameter in ip6_tnl_rcv()Alexey Kodanev2017-11-191-1/+1
| | | | | | | | | | After commit 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") it's not used anywhere in the module, but previously was used in ip6gre_rcv(). Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2017-11-1536-1044/+1869
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
| * tcp: Namespace-ify sysctl_tcp_default_congestion_controlStephen Hemminger2017-11-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Make default TCP default congestion control to a per namespace value. This changes default congestion control to a pointer to congestion ops (rather than implicit as first element of available lsit). The congestion control setting of new namespaces is inherited from the current setting of the root namespace. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: set all.accept_dad to 0 by defaultNicolas Dichtel2017-11-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commits 35e015e1f577 and a2d3f3e33853, the global 'accept_dad' flag is also taken into account (default value is 1). If either global or per-interface flag is non-zero, DAD will be enabled on a given interface. This is not backward compatible: before those patches, the user could disable DAD just by setting the per-interface flag to 0. Now, the user instead needs to set both flags to 0 to actually disable DAD. Restore the previous behaviour by setting the default for the global 'accept_dad' flag to 0. This way, DAD is still enabled by default, as per-interface flags are set to 1 on device creation, but setting them to 0 is enough to disable DAD on a given interface. - Before 35e015e1f57a7 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes X 0 no X 1 yes - After 35e015e1f577 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes 0 0 no 0 1 yes 1 0 yes - After this fix: global per-interface DAD enabled 1 1 yes 0 0 no [default] 0 1 yes 1 0 yes Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") Fixes: a2d3f3e33853 ("ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real") CC: Stefano Brivio <sbrivio@redhat.com> CC: Matteo Croce <mcroce@redhat.com> CC: Erik Kline <ek@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * xfrm6_tunnel: exit_net cleanup check addedVasily Averin2017-11-141-0/+8
| | | | | | | | | | | | | | | | Be sure that spi_byaddr and spi_byspi arrays initialized in net_init hook were return to initial state Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ip6_tunnel: clean up ip4ip6 and ip6ip6's err_handlersXin Long2017-11-131-28/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch is to remove some useless codes of redirect and fix some indents on ip4ip6 and ip6ip6's err_handlers. Note that redirect icmp packet is already processed in ip6_tnl_err, the old redirect codes in ip4ip6_err actually never worked even before this patch. Besides, there's no need to send redirect to user's sk, it's for lower dst, so just remove it in this patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ip6_tunnel: process toobig in a better wayXin Long2017-11-131-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The same improvement in "ip6_gre: process toobig in a better way" is needed by ip4ip6 and ip6ip6 as well. Note that ip4ip6 and ip6ip6 will also update sk dst pmtu in their err_handlers. Like I said before, gre6 could not do this as it's inner proto is not certain. But for all of them, sk dst pmtu will be updated in tx path if in need. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ip6_tunnel: add the process for redirect in ip6_tnl_errXin Long2017-11-131-5/+10
| | | | | | | | | | | | | | | | The same process for redirect in "ip6_gre: add the process for redirect in ip6gre_err" is needed by ip4ip6 and ip6ip6 as well. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ip6_gre: process toobig in a better wayXin Long2017-11-131-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now ip6gre processes toobig icmp packet by setting gre dev's mtu in ip6gre_err, which would cause few things not good: - It couldn't set mtu with dev_set_mtu due to it's not in user context, which causes route cache and idev->cnf.mtu6 not to be updated. - It has to update sk dst pmtu in tx path according to gredev->mtu for ip6gre, while it updates pmtu again according to lower dst pmtu in ip6_tnl_xmit. - To change dev->mtu by toobig icmp packet is not a good idea, it should only work on pmtu. This patch is to process toobig by updating the lower dst's pmtu, as later sk dst pmtu will be updated in ip6_tnl_xmit, the same way as in ip4gre. Note that gre dev's mtu will not be updated any more, it doesn't make any sense to change dev's mtu after receiving a toobig packet. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ip6_gre: add the process for redirect in ip6gre_errXin Long2017-11-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | This patch is to add redirect icmp packet process for ip6gre by calling ip6_redirect() in ip6gre_err(), as in vti6_err. Prior to this patch, there's even no route cache generated after receiving redirect. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: try not to take rtnl_lock in ip6mr_sk_doneFrancesco Ruggeri2017-11-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid traversing the list of mr6_tables (which requires the rtnl_lock) in ip6mr_sk_done(), when we know in advance that a match will not be found. This can happen when rawv6_close()/ip6mr_sk_done() is invoked on non-mroute6 sockets. This patch helps reduce rtnl_lock contention when destroying a large number of net namespaces, each having a non-mroute6 raw socket. v2: same patch, only fixed subject line and expanded comment. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Remove unused skb_shared_info memberMat Martineau2017-11-111-31/+0
| | | | | | | | | | | | | | | | | | ip6_frag_id was only used by UFO, which has been removed. ipv6_proxy_select_ident() only existed to set ip6_frag_id and has no in-tree callers. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ipv6: sysctl to specify IPv6 ND traffic classMaciej Żenczykowski2017-11-112-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a per-device sysctl to specify the default traffic class to use for kernel originated IPv6 Neighbour Discovery packets. Currently this includes: - Router Solicitation (ICMPv6 type 133) ndisc_send_rs() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Solicitation (ICMPv6 type 135) ndisc_send_ns() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Advertisement (ICMPv6 type 136) ndisc_send_na() -> ndisc_send_skb() -> ip6_nd_hdr() - Redirect (ICMPv6 type 137) ndisc_send_redirect() -> ndisc_send_skb() -> ip6_nd_hdr() and if the kernel ever gets around to generating RA's, it would presumably also include: - Router Advertisement (ICMPv6 type 134) (radvd daemon could pick up on the kernel setting and use it) Interface drivers may examine the Traffic Class value and translate the DiffServ Code Point into a link-layer appropriate traffic prioritization scheme. An example of mapping IETF DSCP values to IEEE 802.11 User Priority values can be found here: https://tools.ietf.org/html/draft-ietf-tsvwg-ieee-802-11 The expected primary use case is to properly prioritize ND over wifi. Testing: jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 0 jzem22:~# echo -1 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 256 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 0 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# echo 255 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 255 jzem22:~# echo 34 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 34 jzem22:~# echo $[0xDC] > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# tcpdump -v -i eth0 icmp6 and src host jzem22.pgc and dst host fe80::1 tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes IP6 (class 0xdc, hlim 255, next-header ICMPv6 (58) payload length: 24) jzem22.pgc > fe80::1: [icmp6 sum ok] ICMP6, neighbor advertisement, length 24, tgt is jzem22.pgc, Flags [solicited] (based on original change written by Erik Kline, with minor changes) v2: fix 'suspicious rcu_dereference_check() usage' by explicitly grabbing the rcu_read_lock. Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Erik Kline <ek@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tcp: Namespace-ify sysctl_tcp_rmem and sysctl_tcp_wmemEric Dumazet2017-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Note that when a new netns is created, it inherits its sysctl_tcp_rmem and sysctl_tcp_wmem from initial netns. This change is needed so that we can refine TCP rcvbuf autotuning, to take RTT into consideration. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller2017-11-083-12/+36
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree, they are: 1) Speed up table replacement on busy systems with large tables (and many cores) in x_tables. Now xt_replace_table() synchronizes by itself by waiting until all cpus had an even seqcount and we use no use seqlock when fetching old counters, from Florian Westphal. 2) Add nf_l4proto_log_invalid() and nf_ct_l4proto_log_invalid() to speed up packet processing in the fast path when logging is not enabled, from Florian Westphal. 3) Precompute masked address from configuration plane in xt_connlimit, from Florian. 4) Don't use explicit size for set selection if performance set policy is selected. 5) Allow to get elements from an existing set in nf_tables. 6) Fix incorrect check in nft_hash_deactivate(), from Florian. 7) Cache netlink attribute size result in l4proto->nla_size, from Florian. 8) Handle NFPROTO_INET in nf_ct_netns_get() from conntrack core. 9) Use power efficient workqueue in conntrack garbage collector, from Vincent Guittot. 10) Remove unnecessary parameter, in conntrack l4proto functions, also from Florian. 11) Constify struct nf_conntrack_l3proto definitions, from Florian. 12) Remove all typedefs in nf_conntrack_h323 via coccinelle semantic patch, from Harsha Sharma. 13) Don't store address in the rbtree nodes in xt_connlimit, they are never used, from Florian. 14) Fix out of bound access in the conntrack h323 helper, patch from Eric Sesterhenn. 15) Print symbols for the address returned with %pS in IPVS, from Helge Deller. 16) Proc output should only display its own netns in IPVS, from KUWAZAWA Takuya. 17) Small clean up in size_entry_mwt(), from Colin Ian King. 18) Use test_and_clear_bit from nf_nat_proto_clean() instead of separated non-atomic test and then clear bit, from Florian Westphal. 19) Consolidate prefix length maps in ipset, from Aaron Conole. 20) Fix sparse warnings in ipset, from Jozsef Kadlecsik. 21) Simplify list_set_memsize(), from simran singhal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * netfilter: conntrack: don't cache nlattr_tuple_size result in nla_sizeFlorian Westphal2017-11-061-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently call ->nlattr_tuple_size() once at register time and cache result in l4proto->nla_size. nla_size is the only member that is written to, avoiding this would allow to make l4proto trackers const. We can use ->nlattr_tuple_size() at run time, and cache result in the individual trackers instead. This is an intermediate step, next patch removes nlattr_size() callback and computes size at compile time, then removes nla_size. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: conntrack: make l3proto trackers constFlorian Westphal2017-10-241-1/+1
| | | | | | | | | | | | | | | | | | | | | previous patches removed all writes to them. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: x_tables: don't use seqlock when fetching old countersFlorian Westphal2017-10-241-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | after previous commit xt_replace_table will wait until all cpus had even seqcount (i.e., no cpu is accessing old ruleset). Add a 'old' counter retrival version that doesn't synchronize counters. Its not needed, the old counters are not in use anymore at this point. This speeds up table replacement on busy systems with large tables (and many cores). Cc: Dan Williams <dcbw@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: conntrack: remove pf argument from l4 packet functionsFlorian Westphal2017-10-241-1/+0
| | | | | | | | | | | | | | | | | | | | | not needed/used anymore. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * netfilter: conntrack: add and use nf_l4proto_log_invalidFlorian Westphal2017-10-241-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently pass down the l4 protocol to the conntrack ->packet() function, but the only user of this is the debug info decision. Same information can be derived from struct nf_conn. As a first step, add and use a new log function for this, similar to nf_ct_helper_log(). Add __cold annotation -- invalid packets should be infrequent so gcc can consider all call paths that lead to such a function as unlikely. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | ila: Add a hook type for LWT routesTom Herbert2017-11-081-3/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In LWT tunnels both an input and output route method is defined. If both of these are executed in the same path then double translation happens and the effect is not correct. This patch adds a new attribute that indicates the hook type. Two values are defined for route output and route output. ILA translation is only done for the one that is set. The default is to enable ILA on route output. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ila: allow configuration of identifier typeTom Herbert2017-11-083-23/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow identifier to be explicitly configured for a mapping. This can either be one of the identifier types specified in the ILA draft or a value of ILA_ATYPE_USE_FORMAT which means the identifier type is inferred from the identifier type field. If a value other than ILA_ATYPE_USE_FORMAT is set for a mapping then it is assumed that the identifier type field is not present in an identifier. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ila: add checksum neutral map autoTom Herbert2017-11-083-44/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add checksum neutral auto that performs checksum neutral mapping without using the C-bit. This is enabled by configuration of a mapping. The checksum neutral function has been split into ila_csum_do_neutral_fmt and ila_csum_do_neutral_nofmt. The former handles the C-bit and includes it in the adjustment value. The latter just sets the adjustment value on the locator diff only. Added configuration for checksum neutral map aut in ila_lwt and ila_xlat. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ila: cleanup checksum diffTom Herbert2017-11-081-21/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consolidate computing checksum diff into one function. Add get_csum_diff_iaddr that computes the checksum diff between an address argument and locator being written. get_csum_diff calls this using the destination address in the IP header as the argument. Also moved ila_init_saved_csum to be close to the checksum diff functions. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: addrconf: fix a lockdep splatEric Dumazet2017-11-071-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes a case where GFP_ATOMIC allocation must be used instead of GFP_KERNEL one. [ 54.891146] lock_acquire+0xb3/0x2f0 [ 54.891153] ? fs_reclaim_acquire.part.60+0x5/0x30 [ 54.891165] fs_reclaim_acquire.part.60+0x29/0x30 [ 54.891170] ? fs_reclaim_acquire.part.60+0x5/0x30 [ 54.891178] kmem_cache_alloc_trace+0x3f/0x500 [ 54.891186] ? cyc2ns_read_end+0x1e/0x30 [ 54.891196] ipv6_add_addr+0x15a/0xc30 [ 54.891217] ? ipv6_create_tempaddr+0x2ea/0x5d0 [ 54.891223] ipv6_create_tempaddr+0x2ea/0x5d0 [ 54.891238] ? manage_tempaddrs+0x195/0x220 [ 54.891249] ? addrconf_prefix_rcv_add_addr+0x1c0/0x4f0 [ 54.891255] addrconf_prefix_rcv_add_addr+0x1c0/0x4f0 [ 54.891268] addrconf_prefix_rcv+0x2e5/0x9b0 [ 54.891279] ? neigh_update+0x446/0xb90 [ 54.891298] ? ndisc_router_discovery+0x5ab/0xf00 [ 54.891303] ndisc_router_discovery+0x5ab/0xf00 [ 54.891311] ? retint_kernel+0x2d/0x2d [ 54.891331] ndisc_rcv+0x1b6/0x270 [ 54.891340] icmpv6_rcv+0x6aa/0x9f0 [ 54.891345] ? ipv6_chk_mcast_addr+0x176/0x530 [ 54.891351] ? do_csum+0x17b/0x260 [ 54.891360] ip6_input_finish+0x194/0xb20 [ 54.891372] ip6_input+0x5b/0x2c0 [ 54.891380] ? ip6_rcv_finish+0x320/0x320 [ 54.891389] ip6_mc_input+0x15a/0x250 [ 54.891396] ipv6_rcv+0x772/0x1050 [ 54.891403] ? consume_skb+0xbe/0x2d0 [ 54.891412] ? ip6_make_skb+0x2a0/0x2a0 [ 54.891418] ? ip6_input+0x2c0/0x2c0 [ 54.891425] __netif_receive_skb_core+0xa0f/0x1600 [ 54.891436] ? process_backlog+0xac/0x400 [ 54.891441] process_backlog+0xfa/0x400 [ 54.891448] ? net_rx_action+0x145/0x1130 [ 54.891456] net_rx_action+0x310/0x1130 [ 54.891524] ? RTUSBBulkReceive+0x11d/0x190 [mt7610u_sta] [ 54.891538] __do_softirq+0x140/0xaba [ 54.891553] irq_exit+0x10b/0x160 [ 54.891561] do_IRQ+0xbb/0x1b0 Fixes: f3d9832e56c4 ("ipv6: addrconf: cleanup locking in ipv6_add_addr") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: remove IN6_ADDR_HSIZE from addrconf.hEric Dumazet2017-11-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | IN6_ADDR_HSIZE is private to addrconf.c, move it here to avoid confusion. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-11-0412-0/+12
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ipv6: Implement limits on Hop-by-Hop and Destination optionsTom Herbert2017-11-033-12/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RFC 8200 (IPv6) defines Hop-by-Hop options and Destination options extension headers. Both of these carry a list of TLVs which is only limited by the maximum length of the extension header (2048 bytes). By the spec a host must process all the TLVs in these options, however these could be used as a fairly obvious denial of service attack. I think this could in fact be a significant DOS vector on the Internet, one mitigating factor might be that many FWs drop all packets with EH (and obviously this is only IPv6) so an Internet wide attack might not be so effective (yet!). By my calculation, the worse case packet with TLVs in a standard 1500 byte MTU packet that would be processed by the stack contains 1282 invidual TLVs (including pad TLVS) or 724 two byte TLVs. I wrote a quick test program that floods a whole bunch of these packets to a host and sure enough there is substantial time spent in ip6_parse_tlv. These packets contain nothing but unknown TLVS (that are ignored), TLV padding, and bogus UDP header with zero payload length. 25.38% [kernel] [k] __fib6_clean_all 21.63% [kernel] [k] ip6_parse_tlv 4.21% [kernel] [k] __local_bh_enable_ip 2.18% [kernel] [k] ip6_pol_route.isra.39 1.98% [kernel] [k] fib6_walk_continue 1.88% [kernel] [k] _raw_write_lock_bh 1.65% [kernel] [k] dst_release This patch adds configurable limits to Destination and Hop-by-Hop options. There are three limits that may be set: - Limit the number of options in a Hop-by-Hop or Destination options extension header. - Limit the byte length of a Hop-by-Hop or Destination options extension header. - Disallow unrecognized options in a Hop-by-Hop or Destination options extension header. The limits are set in corresponding sysctls: ipv6.sysctl.max_dst_opts_cnt ipv6.sysctl.max_hbh_opts_cnt ipv6.sysctl.max_dst_opts_len ipv6.sysctl.max_hbh_opts_len If a max_*_opts_cnt is less than zero then unknown TLVs are disallowed. The number of known TLVs that are allowed is the absolute value of this number. If a limit is exceeded when processing an extension header the packet is dropped. Default values are set to 8 for options counts, and set to INT_MAX for maximum length. Note the choice to limit options to 8 is an arbitrary guess (roughly based on the fact that the stack supports three HBH options and just one destination option). These limits have being proposed in draft-ietf-6man-rfc6434-bis. Tested (by Martin Lau) I tested out 1 thread (i.e. one raw_udp process). I changed the net.ipv6.max_dst_(opts|hbh)_number between 8 to 2048. With sysctls setting to 2048, the softirq% is packed to 100%. With 8, the softirq% is almost unnoticable from mpstat. v2; - Code and documention cleanup. - Change references of RFC2460 to be RFC8200. - Add reference to RFC6434-bis where the limits will be in standard. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2017-11-021-0/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Smooth Cong Wang's bug fix into 'net-next'. Basically put the bulk of the tcf_block_put() logic from 'net' into tcf_block_put_ext(), but after the offload unbind. Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud