summaryrefslogtreecommitdiffstats
path: root/net/ipv6
Commit message (Collapse)AuthorAgeFilesLines
* tcp: resets are misroutedAlexey Kuznetsov2012-10-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no sock case").. tcp resets are always lost, when routing is asymmetric. Yes, backing out that patch will result in misrouting of resets for dead connections which used interface binding when were alive, but we actually cannot do anything here. What's died that's died and correct handling normal unbound connections is obviously a priority. Comment to comment: > This has few benefits: > 1. tcp_v6_send_reset already did that. It was done to route resets for IPv6 link local addresses. It was a mistake to do so for global addresses. The patch fixes this as well. Actually, the problem appears to be even more serious than guaranteed loss of resets. As reported by Sergey Soloviev <sol@eqv.ru>, those misrouted resets create a lot of arp traffic and huge amount of unresolved arp entires putting down to knees NAT firewalls which use asymmetric routing. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
* ipv6: gro: fix PV6_GRO_CB(skb)->proto problemEric Dumazet2012-10-081-9/+2
| | | | | | | | | | | | | | | | | | | | | | It seems IPV6_GRO_CB(skb)->proto can be destroyed in skb_gro_receive() if a new skb is allocated (to serve as an anchor for frag_list) We copy NAPI_GRO_CB() only (not the IPV6 specific part) in : *NAPI_GRO_CB(nskb) = *NAPI_GRO_CB(p); So we leave IPV6_GRO_CB(nskb)->proto to 0 (fresh skb allocation) instead of IPPROTO_TCP (6) ipv6_gro_complete() isnt able to call ops->gro_complete() [ tcp6_gro_complete() ] Fix this by moving proto in NAPI_GRO_CB() and getting rid of IPV6_GRO_CB Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: GRO should be ECN friendlyEric Dumazet2012-10-071-4/+7
| | | | | | | | | | | | | | | IPv4 side of the problem was addressed in commit a9e050f4e7f9d (net: tcp: GRO should be ECN friendly) This patch does the same, but for IPv6 : A Traffic Class mismatch doesnt mean flows are different, but instead should force a flush of previous packets. This patch removes artificial packet reordering problem. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-10-062-18/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking changes from David Miller: "The most important bit in here is the fix for input route caching from Eric Dumazet, it's a shame we couldn't fully analyze this in time for 3.6 as it's a 3.6 regression introduced by the routing cache removal. Anyways, will send quickly to -stable after you pull this in. Other changes of note: 1) Fix lockdep splats in team and bonding, from Eric Dumazet. 2) IPV6 adds link local route even when there is no link local address, from Nicolas Dichtel. 3) Fix ixgbe PTP implementation, from Jacob Keller. 4) Fix excessive stack usage in cxgb4 driver, from Vipul Pandya. 5) MAC length computed improperly in VLAN demux, from Antonio Quartulli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt Remove noisy printks from llcp_sock_connect tipc: prevent dropped connections due to rcvbuf overflow silence some noisy printks in irda team: set qdisc_tx_busylock to avoid LOCKDEP splat bonding: set qdisc_tx_busylock to avoid LOCKDEP splat sctp: check src addr when processing SACK to update transport state sctp: fix a typo in prototype of __sctp_rcv_lookup() ipv4: add a fib_type to fib_info can: mpc5xxx_can: fix section type conflict can: peak_pcmcia: fix error return code can: peak_pci: fix error return code cxgb4: Fix build error due to missing linux/vmalloc.h include. bnx2x: fix ring size for 10G functions cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params() ixgbe: add support for X540-AT1 ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bit ixgbe: fix PTP ethtool timestamping function ixgbe: (PTP) Fix PPS interrupt code ixgbe: Fix PTP X540 SDP alignment code for PPS signal ...
| * ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rtGao feng2012-10-041-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | as we hold dst_entry before we call __ip6_del_rt, so we should alse call dst_release not only return -ENOENT when the rt6_info is ip6_null_entry. and we already hold the dst entry, so I think it's safe to call dst_release out of the write-read lock. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: don't add link local route when there is no link local addressNicolas Dichtel2012-10-021-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), a route to fe80::/64 is added in the main table: unreachable fe80::/64 dev lo proto kernel metric 256 error -101 This route does not match any prefix (no fe80:: address on lo). In fact, addrconf_dev_config() will not add link local address because this function filters interfaces by type. If the link local address is added manually, the route to the link local prefix will be automatically added by addrconf_add_linklocal(). Note also, that this route is not deleted when the address is removed. After looking at the code, it seems that addrconf_add_lroute() is redundant with addrconf_add_linklocal(), because this function will add the link local route when the link local address is configured. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sections: fix section conflicts in netAndi Kleen2012-10-063-3/+3
|/ | | | | | | Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tcp: gro: add checksuming helpersEric Dumazet2012-10-011-3/+17
| | | | | | | | | | | | | | skb with CHECKSUM_NONE cant currently be handled by GRO, and we notice this deep in GRO stack in tcp[46]_gro_receive() But there are cases where GRO can be a benefit, even with a lack of checksums. This preliminary work is needed to add GRO support to tunnels. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: del unreachable route when an addr is deleted on loNicolas Dichtel2012-10-011-2/+8
| | | | | | | | | | | | | | | | | When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), two routes are added: - one in the local table: local 2002::1 via :: dev lo proto none metric 0 - one the in main table (for the prefix): unreachable 2002::1 dev lo proto kernel metric 256 error -101 When the address is deleted, the route inserted in the main table remains because we use rt6_lookup(), which returns NULL when dst->error is set, which is the case here! Thus, it is better to use ip6_route_lookup() to avoid this kind of filter. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: return errno pointers consistently for fib6_add_1()Lin Ming2012-09-281-14/+6
| | | | | | | | fib6_add_1() should consistently return errno pointers, rather than a mixture of NULL and errno pointers. Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-09-285-49/+38
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: mip6: fix mip6_mh_filter()Eric Dumazet2012-09-251-9/+11
| | | | | | | | | | | | | | | | | | | | mip6_mh_filter() should not modify its input, or else its caller would need to recompute ipv6_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: raw: fix icmpv6_filter()Eric Dumazet2012-09-251-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | icmpv6_filter() should not modify its input, or else its caller would need to recompute ipv6_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() and change the prototype to make clear both sk and skb are const. Also, if icmpv6 header cannot be found, do not deliver the packet, as we do in IPv4. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: fix return value check in fib6_add()Wei Yongjun2012-09-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | In case of error, the function fib6_add_1() returns ERR_PTR() or NULL pointer. The ERR_PTR() case check is missing in fib6_add(). dpatch engine is used to generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: use DST_* macro to set obselete fieldNicolas Dichtel2012-09-181-3/+3
| | | | | | | | | | | | Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: use net->rt_genid to check dst validityNicolas Dichtel2012-09-182-26/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | IPv6 dst should take care of rt_genid too. When a xfrm policy is inserted or deleted, all dst should be invalidated. To force the validation, dst entries should be created with ->obsolete set to DST_OBSOLETE_FORCE_CHK. This was already the case for all functions calling ip6_dst_alloc(), except for ip6_rt_copy(). As a consequence, we can remove the specific code in inet6_connection_sock. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: gre: remove ip6gre_header_parse()Eric Dumazet2012-09-271-8/+0
| | | | | | | | | | | | | | | | | | dev_parse_header() callers provide 8 bytes of storage, so it's not possible to store an IPv6 address. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | nf_defrag_ipv6: fix oops on module unloadingKonstantin Khlebnikov2012-09-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | fix copy-paste error introduced in linux-next commit "ipv6: add a new namespace for nf_conntrack_reasm" Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Amerigo Wang <amwang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tunnel: drop packet if ECN present with not-ECTstephen hemminger2012-09-271-30/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux tunnels were written before RFC6040 and therefore never implemented the corner case of ECN getting set in the outer header and the inner header not being ready for it. Section 4.2. Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. This patch moves the ECN decap logic out of the individual tunnels into a common place. It also adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Overloads rx_frame_error to keep track of ECN related error. Thanks to Chris Wright who caught this while reviewing the new VXLAN tunnel. This code was tested by injecting faulty logic in other end GRE to send incorrectly encapsulated packets. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xfrm: remove extranous rcu_read_lockstephen hemminger2012-09-271-6/+0
| | | | | | | | | | | | | | | | The handlers for xfrm_tunnel are always invoked with rcu read lock already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gre: remove unnecessary rcu_read_lock/unlockstephen hemminger2012-09-271-11/+3
| | | | | | | | | | | | | | | | The gre function pointers for receive and error handling are always called (from gre.c) with rcu_read_lock already held. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use a per task frag allocatorEric Dumazet2012-09-241-40/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently use a per socket order-0 page cache for tcp_sendmsg() operations. This page is used to build fragments for skbs. Its done to increase probability of coalescing small write() into single segments in skbs still in write queue (not yet sent) But it wastes a lot of memory for applications handling many mostly idle sockets, since each socket holds one page in sk->sk_sndmsg_page Its also quite inefficient to build TSO 64KB packets, because we need about 16 pages per skb on arches where PAGE_SIZE = 4096, so we hit page allocator more than wanted. This patch adds a per task frag allocator and uses bigger pages, if available. An automatic fallback is done in case of memory pressure. (up to 32768 bytes per frag, thats order-3 pages on x86) This increases TCP stream performance by 20% on loopback device, but also benefits on other network devices, since 8x less frags are mapped on transmit and unmapped on tx completion. Alexander Duyck mentioned a probable performance win on systems with IOMMU enabled. Its possible some SG enabled hardware cant cope with bigger fragments, but their ndo_start_xmit() should already handle this, splitting a fragment in sub fragments, since some arches have PAGE_SIZE=65536 Successfully tested on various ethernet devices. (ixgbe, igb, bnx2x, tg3, mellanox mlx4) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of git://1984.lsi.us.es/nf-nextDavid S. Miller2012-09-244-249/+36
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== This patchset contains updates for your net-next tree, they are: * Mostly fixes for the recently pushed IPv6 NAT support: - Fix crash while removing nf_nat modules from Patrick McHardy. - Fix unbalanced rcu_read_unlock from Ulrich Weber. - Merge NETMAP and REDIRECT into one single xt_target module, from Jan Engelhardt. - Fix Kconfig for IPv6 NAT, which allows inconsistent configurations, from myself. * Updates for ipset, all of the from Jozsef Kadlecsik: - Add the new "nomatch" option to obtain reverse set matching. - Support for /0 CIDR in hash:net,iface set type. - One non-critical fix for a rare crash due to pass really wrong configuration parameters. - Coding style cleanups. - Sparse fixes. - Add set revision supported via modinfo.i * One extension for the xt_time match, to support matching during the transition between two days with one single rule, from Florian Westphal. * Fix maximum packet length supported by nfnetlink_queue and add NFQA_CAP_LEN attribute, from myself. You can notice that this batch contains a couple of fixes that may go to 3.6-rc but I don't consider them critical to push them: * The ipset fix for the /0 cidr case, which is triggered with one inconsistent command line invocation of ipset. * The nfnetlink_queue maximum packet length supported since it requires the new NFQA_CAP_LEN attribute to provide a full workaround for the described problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | netfilter: combine ipt_REDIRECT and ip6t_REDIRECTJan Engelhardt2012-09-213-109/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Combine more modules since the actual code is so small anyway that the kmod metadata and the module in its loaded state totally outweighs the combined actual code size. IP_NF_TARGET_REDIRECT becomes a compat option; IP6_NF_TARGET_REDIRECT is completely eliminated since it has not see a release yet. Signed-off-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | netfilter: combine ipt_NETMAP and ip6t_NETMAPJan Engelhardt2012-09-213-104/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Combine more modules since the actual code is so small anyway that the kmod metadata and the module in its loaded state totally outweighs the combined actual code size. IP_NF_TARGET_NETMAP becomes a compat option; IP6_NF_TARGET_NETMAP is completely eliminated since it has not see a release yet. Signed-off-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | netfilter: fix IPv6 NAT dependencies in KconfigPablo Neira Ayuso2012-09-211-55/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * NF_NAT_IPV6 requires IP6_NF_IPTABLES * IP6_NF_TARGET_MASQUERADE, IP6_NF_TARGET_NETMAP, IP6_NF_TARGET_REDIRECT and IP6_NF_TARGET_NPT require NF_NAT_IPV6. This change just mirrors what IPv4 does in Kconfig, for consistency. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | | tcp: TCP Fast Open Server - take SYNACK RTT after completing 3WHSNeal Cardwell2012-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When taking SYNACK RTT samples for servers using TCP Fast Open, fix the code to ensure that we only call tcp_valid_rtt_meas() after we receive the ACK that completes the 3-way handshake. Previously we were always taking an RTT sample in tcp_v4_syn_recv_sock(). However, for TCP Fast Open connections tcp_v4_conn_req_fastopen() calls tcp_v4_syn_recv_sock() at the time we receive the SYN. So for TFO we must wait until tcp_rcv_state_process() to take the RTT sample. To fix this, we wait until after TFO calls tcp_v4_syn_recv_sock() before we set the snt_synack timestamp, since tcp_synack_rtt_meas() already ensures that we only take a SYNACK RTT sample if snt_synack is non-zero. To be careful, we only take a snt_synack timestamp when a SYNACK transmit or retransmit succeeds. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | tcp: extract code to compute SYNACK RTTNeal Cardwell2012-09-221-3/+1
|/ / | | | | | | | | | | | | | | In preparation for adding another spot where we compute the SYNACK RTT, extract this code so that it can be shared. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: unify fragment thresh handling codeAmerigo Wang2012-09-192-16/+8
| | | | | | | | | | | | | | | | Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: make ip6_frag_nqueues() and ip6_frag_mem() static inlineAmerigo Wang2012-09-191-10/+0
| | | | | | | | | | | | | | | | Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: unify conntrack reassembly expire code with standard oneAmerigo Wang2012-09-192-99/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two years ago, Shan Wei tried to fix this: http://patchwork.ozlabs.org/patch/43905/ The problem is that RFC2460 requires an ICMP Time Exceeded -- Fragment Reassembly Time Exceeded message should be sent to the source of that fragment, if the defragmentation times out. " If insufficient fragments are received to complete reassembly of a packet within 60 seconds of the reception of the first-arriving fragment of that packet, reassembly of that packet must be abandoned and all the fragments that have been received for that packet must be discarded. If the first fragment (i.e., the one with a Fragment Offset of zero) has been received, an ICMP Time Exceeded -- Fragment Reassembly Time Exceeded message should be sent to the source of that fragment. " As Herbert suggested, we could actually use the standard IPv6 reassembly code which follows RFC2460. With this patch applied, I can see ICMP Time Exceeded sent from the receiver when the sender sent out 3/4 fragmented IPv6 UDP packet. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: add a new namespace for nf_conntrack_reasmAmerigo Wang2012-09-191-42/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed by Michal, it is necessary to add a new namespace for nf_conntrack_reasm code, this prepares for the second patch. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: recursive check rt->dst.from when call rt6_check_expiredLi RongQing2012-09-191-5/+1
| | | | | | | | | | | | | | | | | | | | If dst cache dst_a copies from dst_b, and dst_b copies from dst_c, check if dst_a is expired or not, we should not end with dst_a->dst.from, dst_b, we should check dst_c. CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-09-153-5/+17
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: net/netfilter/nfnetlink_log.c net/netfilter/xt_LOG.c Rather easy conflict resolution, the 'net' tree had bug fixes to make sure we checked if a socket is a time-wait one or not and elide the logging code if so. Whereas on the 'net-next' side we are calculating the UID and GID from the creds using different interfaces due to the user namespace changes from Eric Biederman. Signed-off-by: David S. Miller <davem@davemloft.net>
| * udp: increment UDP_MIB_INERRORS if copy failedEric Dumazet2012-09-071-0/+11
| | | | | | | | | | | | | | | | | | In UDP recvmsg(), we miss an increase of UDP_MIB_INERRORS if the copy of skb to userspace failed for whatever reason. Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tcp: fix possible socket refcount problem for ipv6Julian Anastasov2012-09-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | commit 144d56e91044181ec0ef67aeca91e9a8b5718348 ("tcp: fix possible socket refcount problem") is missing the IPv6 part. As tcp_release_cb is shared by both protocols we should hold sock reference for the TCP_MTU_REDUCED_DEFERRED bit. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ipv6: fix error return codeJulia Lawall2012-08-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize return variable before exiting on an error path. The initial initialization of the return variable is also dropped, because that value is never used. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: replace write lock with read lock when get route infoLi RongQing2012-09-132-6/+6
| | | | | | | | | | | | | | | | | | | | geting route info does not write rt->rt6i_table, so replace write lock with read lock Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: route templates can be constEric Dumazet2012-09-131-3/+3
| | | | | | | | | | | | | | We kmemdup() templates, so they can be const. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: Compare addresses only bits up to the prefix length (RFC6724).YOSHIFUJI Hideaki / 吉藤英明2012-09-131-2/+4
| | | | | | | | | | | | | | | | Compare bits up to the source address's prefix length only to allows DNS load balancing to continue to be used as a tie breaker. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: Add labels for site-local and 6bone testing addresses (RFC6724)YOSHIFUJI Hideaki / 吉藤英明2012-09-131-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | Added labels for site-local addresses (fec0::/10) and 6bone testing addresses (3ffe::/16) in order to depreference them. Note that the RFC introduced new rows for Teredo, ULA and 6to4 addresses in the default policy table. Some of them have different labels from ours. For backward compatibility, we do not change the "default" labels. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: remove some useless RCU read lockAmerigo Wang2012-09-102-24/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After this commit: commit 97cac0821af4474ec4ba3a9e7a36b98ed9b6db88 Author: David S. Miller <davem@davemloft.net> Date: Mon Jul 2 22:43:47 2012 -0700 ipv6: Store route neighbour in rt6_info struct. we no longer use RCU to protect route neighbour. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlink: Rename pid to portid to avoid confusionEric W. Biederman2012-09-104-36/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: fix handling of throw routesNicolas Dichtel2012-09-071-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's the same problem that previous fix about blackhole and prohibit routes. When adding a throw route, it was handled like a classic route. Moreover, it was only possible to add this kind of routes by specifying an interface. Before the patch: $ ip route add throw 2001::2/128 RTNETLINK answers: No such device $ ip route add throw 2001::2/128 dev eth0 $ ip -6 route | grep 2001::2 2001::2 dev eth0 metric 1024 After: $ ip route add throw 2001::2/128 $ ip -6 route | grep 2001::2 throw 2001::2 dev lo metric 1024 error -11 Reported-by: Markus Stenberg <markus.stenberg@iki.fi> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: fix handling of blackhole and prohibit routesNicolas Dichtel2012-09-051-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When adding a blackhole or a prohibit route, they were handling like classic routes. Moreover, it was only possible to add this kind of routes by specifying an interface. Bug already reported here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498498 Before the patch: $ ip route add blackhole 2001::1/128 RTNETLINK answers: No such device $ ip route add blackhole 2001::1/128 dev eth0 $ ip -6 route | grep 2001 2001::1 dev eth0 metric 1024 After: $ ip route add blackhole 2001::1/128 $ ip -6 route | grep 2001 blackhole 2001::1 dev lo metric 1024 error -22 v2: wrong patch v3: add a field fc_type in struct fib6_config to store RTN_* type Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netfilter: ipv6: using csum_ipv6_magic requires net/ip6_checksum.hStephen Rothwell2012-09-051-0/+1
| | | | | | | | | | | | | | | | | | | | Fixes this build error: net/ipv6/netfilter/nf_nat_l3proto_ipv6.c: In function 'nf_nat_ipv6_csum_recalc': net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:144:4: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso2012-09-036-41/+59
|\ \ | | | | | | | | | | | | This merges (3f509c6 netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation) to Patrick McHardy's IPv6 NAT changes.
| * | tcp: TCP Fast Open Server - support TFO listenersJerry Chu2012-08-312-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch builds on top of the previous patch to add the support for TFO listeners. This includes - 1. allocating, properly initializing, and managing the per listener fastopen_queue structure when TFO is enabled 2. changes to the inet_csk_accept code to support TFO. E.g., the request_sock can no longer be freed upon accept(), not until 3WHS finishes 3. allowing a TCP_SYN_RECV socket to properly poll() and sendmsg() if it's a TFO socket 4. properly closing a TFO listener, and a TFO socket before 3WHS finishes 5. supporting TCP_FASTOPEN socket option 6. modifying tcp_check_req() to use to check a TFO socket as well as request_sock 7. supporting TCP's TFO cookie option 8. adding a new SYN-ACK retransmit handler to use the timer directly off the TFO socket rather than the listener socket. Note that TFO server side will not retransmit anything other than SYN-ACK until the 3WHS is completed. The patch also contains an important function "reqsk_fastopen_remove()" to manage the somewhat complex relation between a listener, its request_sock, and the corresponding child socket. See the comment above the function for the detail. Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: remove some deadcodeSorin Dumitru2012-08-311-22/+7
| | | | | | | | | | | | | | | | | | | | | | | | __ipv6_regen_rndid no longer returns anything other than 0 so there's no point in verifying what it returns Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'for-next' of ↵David S. Miller2012-08-244-12/+47
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace This is an initial merge in of Eric Biederman's work to start adding user namespace support to the networking. Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud