summaryrefslogtreecommitdiffstats
path: root/net/ipv4/icmp.c
Commit message (Collapse)AuthorAgeFilesLines
* net: icmp_route_lookup should use rt dev to determine L3 domainDavid Ahern2016-11-091-2/+2
| | | | | | | | | | | icmp_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have an rt. Update icmp_route_lookup to use the rt on the skb to determine L3 domain. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: icmp: rename ICMPMSGIN_INC_STATS_BH()Eric Dumazet2016-04-271-1/+1
| | | | | | | Remove misleading _BH suffix. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rename ICMP_INC_STATS_BH()Eric Dumazet2016-04-271-8/+8
| | | | | | | Rename ICMP_INC_STATS_BH() to __ICMP_INC_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv4: Convert IP network timestamps to be y2038 safeDeepa Dinamani2016-03-011-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | ICMP timestamp messages and IP source route options require timestamps to be in milliseconds modulo 24 hours from midnight UT format. Add inet_current_timestamp() function to support this. The function returns the required timestamp in network byte order. Timestamp calculation is also changed to call ktime_get_real_ts64() which uses struct timespec64. struct timespec64 is y2038 safe. Previously it called getnstimeofday() which uses struct timespec. struct timespec is not y2038 safe. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "ipv4/icmp: redirect messages can use the ingress daddr as source"Paolo Abeni2015-10-141-8/+1
| | | | | | | | | | | | | | | | | Revert the commit e2ca690b657f ("ipv4/icmp: redirect messages can use the ingress daddr as source"), which tried to introduce a more suitable behaviour for ICMP redirect messages generated by VRRP routers. However RFC 5798 section 8.1.1 states: The IPv4 source address of an ICMP redirect should be the address that the end-host used when making its next-hop routing decision. while said commit used the generating packet destination address, which do not match the above and in most cases leads to no redirect packets to be generated. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4/icmp: redirect messages can use the ingress daddr as sourcePaolo Abeni2015-10-121-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows configuring how the source address of ICMP redirect messages is selected; by default the old behaviour is retained, while setting icmp_redirects_use_orig_daddr force the usage of the destination address of the packet that caused the redirect. The new behaviour fits closely the RFC 5798 section 8.1.1, and fix the following scenario: Two machines are set up with VRRP to act as routers out of a subnet, they have IPs x.x.x.1/24 and x.x.x.2/24, with VRRP holding on to x.x.x.254/24. If a host in said subnet needs to get an ICMP redirect from the VRRP router, i.e. to reach a destination behind a different gateway, the source IP in the ICMP redirect is chosen as the primary IP on the interface that the packet arrived at, i.e. x.x.x.1 or x.x.x.2. The host will then ignore said redirect, due to RFC 1122 section 3.2.2.2, and will continue to use the wrong next-op. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: ICMP packet inspection for multipathPeter Nørlund2015-10-051-1/+18
| | | | | | | | | ICMP packets are inspected to let them route together with the flow they belong to, minimizing the chance that a problematic path will affect flows on other paths, and so that anycast environments can work with ECMP. Signed-off-by: Peter Nørlund <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Replace vrf_master_ifindex{, _rcu} with l3mdev equivalentsDavid Ahern2015-09-291-4/+4
| | | | | | | | | | | | | | | Replace calls to vrf_master_ifindex_rcu and vrf_master_ifindex with either l3mdev_master_ifindex_rcu or l3mdev_master_ifindex. The pattern: oif = vrf_master_ifindex(dev) ? : dev->ifindex; is replaced with oif = l3mdev_fib_oif(dev); And remove the now unused vrf macros. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix panic in icmp_route_lookupDavid Ahern2015-09-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Andrey reported a panic: [ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4 [ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320 [ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000 [ 7249.865637] Oops: 0000 [#1] ... [ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-999-generic #201509220155 [ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014 08/02/2006 [ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000 [ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0 [ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320 [ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00 [ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974 [ 7249.867077] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0 [ 7249.867141] Stack: [ 7249.867165] 320310ee 00000000 00000042 320310ee 00000000 c1aeca00 f3920240 f0c69180 [ 7249.867268] f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000 e659266c f483ba54 [ 7249.867361] 8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0 c16b0e00 00000064 [ 7249.867448] Call Trace: [ 7249.867494] [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e] [ 7249.867534] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867576] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867615] [<c16b0e00>] ? icmp_send+0xa0/0x380 [ 7249.867648] [<c16b102f>] icmp_send+0x2cf/0x380 [ 7249.867681] [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4] [ 7249.867714] [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT] [ 7249.867746] [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables] [ 7249.867780] [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0 [nf_conntrack] [ 7249.867838] [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack] [ 7249.867889] [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter] [ 7249.867933] [<c16776a1>] nf_iterate+0x71/0x80 [ 7249.867970] [<c1677715>] nf_hook_slow+0x65/0xc0 [ 7249.868002] [<c1681811>] __ip_local_out_sk+0xc1/0xd0 [ 7249.868034] [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0 [ 7249.868066] [<c1681836>] ip_local_out_sk+0x16/0x30 [ 7249.868097] [<c1684054>] ip_send_skb+0x14/0x80 [ 7249.868129] [<c16840f4>] ip_push_pending_frames+0x34/0x40 [ 7249.868163] [<c16844a2>] ip_send_unicast_reply+0x282/0x310 [ 7249.868196] [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380 [ 7249.868227] [<c16a1b63>] tcp_v4_rcv+0x323/0x990 [ 7249.868257] [<c16776a1>] ? nf_iterate+0x71/0x80 [ 7249.868289] [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230 [ 7249.868322] [<c167df4c>] ip_local_deliver+0x4c/0xa0 [ 7249.868353] [<c167dba0>] ? ip_rcv_finish+0x390/0x390 [ 7249.868384] [<c167d88c>] ip_rcv_finish+0x7c/0x390 [ 7249.868415] [<c167e280>] ip_rcv+0x2e0/0x420 ... Prior to the VRF change the oif was not set in the flow struct, so the VRF support should really have only added the vrf_master_ifindex lookup. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Cc: Andrey Melnikov <temnota.am@gmail.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add support for VRFs to inetpeer cacheDavid Ahern2015-08-281-1/+2
| | | | | | | | | inetpeer caches based on address only, so duplicate IP addresses within a namespace return the same cached entry. Enhance the ipv4 address key to contain both the IPv4 address and VRF device index. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vrf: vrf_master_ifindex_rcu is not always called with rcu read lockNikolay Aleksandrov2015-08-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While running net-next I hit this: [ 634.073119] =============================== [ 634.073150] [ INFO: suspicious RCU usage. ] [ 634.073182] 4.2.0-rc6+ #45 Not tainted [ 634.073213] ------------------------------- [ 634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check() usage! [ 634.073274] other info that might help us debug this: [ 634.073307] rcu_scheduler_active = 1, debug_locks = 1 [ 634.073338] 2 locks held by swapper/0/0: [ 634.073369] #0: (((&n->timer))){+.-...}, at: [<ffffffff8112bc35>] call_timer_fn+0x5/0x480 [ 634.073412] #1: (slock-AF_INET){+.-...}, at: [<ffffffff8174f0f5>] icmp_send+0x155/0x5f0 [ 634.073450] stack backtrace: [ 634.073483] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc6+ #45 [ 634.073514] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 634.073545] 0000000000000000 0593ba8242d9ace4 ffff88002fc03b48 ffffffff81803f1b [ 634.073612] 0000000000000000 ffffffff81e12500 ffff88002fc03b78 ffffffff811003c5 [ 634.073642] 0000000000000000 ffff88002ec4e600 ffffffff81f00f80 ffff88002fc03cf0 [ 634.073669] Call Trace: [ 634.073694] <IRQ> [<ffffffff81803f1b>] dump_stack+0x4c/0x65 [ 634.073728] [<ffffffff811003c5>] lockdep_rcu_suspicious+0xc5/0x100 [ 634.073763] [<ffffffff8174eb56>] icmp_route_lookup+0x176/0x5c0 [ 634.073793] [<ffffffff8174f2fb>] ? icmp_send+0x35b/0x5f0 [ 634.073818] [<ffffffff8174f274>] ? icmp_send+0x2d4/0x5f0 [ 634.073844] [<ffffffff8174f3ce>] icmp_send+0x42e/0x5f0 [ 634.073873] [<ffffffff8170b662>] ipv4_link_failure+0x22/0xa0 [ 634.073899] [<ffffffff8174bdda>] arp_error_report+0x3a/0x80 [ 634.073926] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.073952] [<ffffffff816d396e>] neigh_invalidate+0x8e/0x110 [ 634.073984] [<ffffffff816d62ae>] neigh_timer_handler+0x1ae/0x290 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112bce3>] call_timer_fn+0xb3/0x480 [ 634.074013] [<ffffffff8112bc35>] ? call_timer_fn+0x5/0x480 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112c2bc>] run_timer_softirq+0x20c/0x430 [ 634.074013] [<ffffffff810af50e>] __do_softirq+0xde/0x630 [ 634.074013] [<ffffffff810afc97>] irq_exit+0x117/0x120 [ 634.074013] [<ffffffff81810976>] smp_apic_timer_interrupt+0x46/0x60 [ 634.074013] [<ffffffff8180e950>] apic_timer_interrupt+0x70/0x80 [ 634.074013] <EOI> [<ffffffff8106b9d6>] ? native_safe_halt+0x6/0x10 [ 634.074013] [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10 [ 634.074013] [<ffffffff81027d43>] default_idle+0x23/0x200 [ 634.074013] [<ffffffff8102852f>] arch_cpu_idle+0xf/0x20 [ 634.074013] [<ffffffff810f89ba>] default_idle_call+0x2a/0x40 [ 634.074013] [<ffffffff810f8dcc>] cpu_startup_entry+0x39c/0x4c0 [ 634.074013] [<ffffffff817f9cad>] rest_init+0x13d/0x150 [ 634.074013] [<ffffffff81f69038>] start_kernel+0x4a8/0x4c9 [ 634.074013] [<ffffffff81f68120>] ? early_idt_handler_array+0x120/0x120 [ 634.074013] [<ffffffff81f68339>] x86_64_start_reservations+0x2a/0x2c [ 634.074013] [<ffffffff81f68485>] x86_64_start_kernel+0x14a/0x16d It would seem vrf_master_ifindex_rcu() can be called without RCU held in other contexts as well so introduce a new helper which acquires rcu and returns the ifindex. Also add curly braces around both the "if" and "else" parts as per the style guide. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix up inet_addr_type checksDavid Ahern2015-08-131-2/+3
| | | | | | | | | | | | | | | Currently inet_addr_type and inet_dev_addr_type expect local addresses to be in the local table. With the VRF device local routes for devices associated with a VRF will be in the table associated with the VRF. Provide an alternate inet_addr lookup to use a specific table rather than defaulting to the local table. inet_addr_type_dev_table keeps the same semantics as inet_addr_type but if the passed in device is enslaved to a VRF then the table for that VRF is used for the lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Use VRF device index for lookups on TXDavid Ahern2015-08-131-0/+4
| | | | | | | | | | | | | As with ingress use the index of VRF master device for route lookups on egress. However, the oif should only be used to direct the lookups to a specific table. Routes in the table are not based on the VRF device but rather interfaces that are part of the VRF so do not consider the oif for lookups within the table. The FLOWI_FLAG_VRFSRC is used to control this latter part. Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* icmp: Don't leak original dst into ip_route_input()Thomas Graf2015-07-211-0/+1
| | | | | | | | | | ip_route_input() unconditionally overwrites the dst. Hide the original dst attached to the skb by calling skb_dst_set(skb, NULL) prior to ip_route_input(). Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: coding style: comparison for equality with NULLIan Morris2015-04-031-3/+3
| | | | | | | | | | | | The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: icmp: use percpu allocationEric Dumazet2015-01-311-9/+8
| | | | | | | | | | Get rid of nr_cpu_ids and use modern percpu allocation. Note that the sockets themselves are not yet allocated using NUMA affinity. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* icmp: Remove some spurious dropped packet profile hits from the ICMP pathRick Jones2014-11-181-15/+28
| | | | | | | | | If icmp_rcv() has successfully processed the incoming ICMP datagram, we should use consume_skb() rather than kfree_skb() because a hit on the likes of perf -e skb:kfree_skb is not called-for. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert LIMIT_NETDEBUG to net_dbg_ratelimitedJoe Perches2014-11-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the more common dynamic_debug capable net_dbg_ratelimited and remove the LIMIT_NETDEBUG macro. All messages are still ratelimited. Some KERN_<LEVEL> uses are changed to KERN_DEBUG. This may have some negative impact on messages that were emitted at KERN_INFO that are not not enabled at all unless DEBUG is defined or dynamic_debug is enabled. Even so, these messages are now _not_ emitted by default. This also eliminates the use of the net_msg_warn sysctl "/proc/sys/net/core/warnings". For backward compatibility, the sysctl is not removed, but it has no function. The extern declaration of net_msg_warn is removed from sock.h and made static in net/core/sysctl_net_core.c Miscellanea: o Update the sysctl documentation o Remove the embedded uses of pr_fmt o Coalesce format fragments o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* icmp: add a global rate limitationEric Dumazet2014-09-231-4/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current ICMP rate limiting uses inetpeer cache, which is an RBL tree protected by a lock, meaning that hosts can be stuck hard if all cpus want to check ICMP limits. When say a DNS or NTP server process is restarted, inetpeer tree grows quick and machine comes to its knees. iptables can not help because the bottleneck happens before ICMP messages are even cooked and sent. This patch adds a new global limitation, using a token bucket filter, controlled by two new sysctl : icmp_msgs_per_sec - INTEGER Limit maximal number of ICMP packets sent per second from this host. Only messages whose type matches icmp_ratemask are controlled by this limit. Default: 1000 icmp_msgs_burst - INTEGER icmp_msgs_per_sec controls number of ICMP packets sent per second, while icmp_msgs_burst controls the burst size of these packets. Default: 50 Note that if we really want to send millions of ICMP messages per second, we might extend idea and infra added in commit 04ca6973f7c1a ("ip: make IP identifiers less predictable") : add a token bucket in the ip_idents hash and no longer rely on inetpeer. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: remove nested rcu_read_lock/unlockDuan Jiong2014-08-021-2/+0
| | | | | | | | | | | | | | | | | | | ip_local_deliver_finish() already have a rcu_read_lock/unlock, so the rcu_read_lock/unlock is unnecessary. See the stack below: ip_local_deliver_finish | | ->icmp_rcv | | ->icmp_socket_deliver Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix the counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORSDuan Jiong2014-07-311-1/+3
| | | | | | | | | | | | | | When dealing with ICMPv[46] Error Message, function icmp_socket_deliver() and icmpv6_notify() do some valid checks on packet's length, but then some protocols check packet's length redaudantly. So remove those duplicated statements, and increase counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORS in function icmp_socket_deliver() and icmpv6_notify() respectively. In addition, add missed counter in udp6/udplite6 when socket is NULL. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: icmp: Fix pMTU handling for rare caseEdward Allcutt2014-07-071-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some older router implementations still send Fragmentation Needed errors with the Next-Hop MTU field set to zero. This is explicitly described as an eventuality that hosts must deal with by the standard (RFC 1191) since older standards specified that those bits must be zero. Linux had a generic (for all of IPv4) implementation of the algorithm described in the RFC for searching a list of MTU plateaus for a good value. Commit 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") removed this as part of the changes to remove the routing cache. Subsequently any Fragmentation Needed packet with a zero Next-Hop MTU has been discarded without being passed to the per-protocol handlers or notifying userspace for raw sockets. When there is a router which does not implement RFC 1191 on an MTU limited path then this results in stalled connections since large packets are discarded and the local protocols are not notified so they never attempt to lower the pMTU. One example I have seen is an OpenBSD router terminating IPSec tunnels. It's worth pointing out that this case is distinct from the BSD 4.2 bug which incorrectly calculated the Next-Hop MTU since the commit in question dismissed that as a valid concern. All of the per-protocols handlers implement the simple approach from RFC 1191 of immediately falling back to the minimum value. Although this is sub-optimal it is vastly preferable to connections hanging indefinitely. Remove the Next-Hop MTU != 0 check and allow such packets to follow the normal path. Fixes: 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") Signed-off-by: Edward Allcutt <edward.allcutt@openmarket.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add a sysctl to reflect the fwmark on repliesLorenzo Colitti2014-05-131-2/+9
| | | | | | | | | | | | | | | | | | Kernel-originated IP packets that have no user socket associated with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.) are emitted with a mark of zero. Add a sysctl to make them have the same mark as the packet they are replying to. This allows an administrator that wishes to do so to use mark-based routing, firewalling, etc. for these replies by marking the original packets inbound. Tested using user-mode linux: - ICMP/ICMPv6 echo replies and errors. - TCP RST packets (IPv4 and IPv6). Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* icmp: Call skb_checksum_simple_validateTom Herbert2014-05-081-10/+2
| | | | | | | Use skb_checksum_simple_validate to verify checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: introduce hardened ip_no_pmtu_disc modeHannes Frederic Sowa2014-01-131-4/+24
| | | | | | | | | | | | | | | | | | | This new ip_no_pmtu_disc mode only allowes fragmentation-needed errors to be honored by protocols which do more stringent validation on the ICMP's packet payload. This knob is useful for people who e.g. want to run an unmodified DNS server in a namespace where they need to use pmtu for TCP connections (as they are used for zone transfers or fallback for requests) but don't want to use possibly spoofed UDP pmtu information. Currently the whitelisted protocols are TCP, SCTP and DCCP as they check if the returned packet is in the window or if the association is valid. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: John Heffner <johnwheffner@gmail.com> Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: new ip_no_pmtu_disc mode to always discard incoming frag needed msgsHannes Frederic Sowa2013-12-181-1/+3
| | | | | | | | | | This new mode discards all incoming fragmentation-needed notifications as I guess was originally intended with this knob. To not break backward compatibility too much, I only added a special case for mode 2 in the receiving path. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: make no_pmtu_disc per namespace and kill ipv4_configHannes Frederic Sowa2013-12-181-1/+1
| | | | | | | | The other field in ipv4_config, log_martians, was converted to a per-interface setting, so we can just remove the whole structure. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: processing ancillary IP_TOS or IP_TTLFrancesco Fusco2013-09-281-0/+5
| | | | | | | | | | | | | | | | | | | If IP_TOS or IP_TTL are specified as ancillary data, then sendmsg() sends out packets with the specified TTL or TOS overriding the socket values specified with the traditional setsockopt(). The struct inet_cork stores the values of TOS, TTL and priority that are passed through the struct ipcm_cookie. If there are user-specified TOS (tos != -1) or TTL (ttl != 0) in the struct ipcm_cookie, these values are used to override the per-socket values. In case of TOS also the priority is changed accordingly. Two helper functions get_rttos and get_rtconn_flags are defined to take into account the presence of a user specified TOS value when computing RT_TOS and RT_CONN_FLAGS. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* icmp: avoid allocating large struct on stackCong Wang2013-06-031-17/+23
| | | | | | | | | | | struct icmp_bxm is a large struct, reduce stack usage by allocating it on heap. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ] icmp: fix icmp_unreach() comment.Rami Rosen2013-06-031-1/+2
| | | | | | | | ICMP_PARAMETERPROB is handled by icmp_unreach(); This patch adds ICMP_PARAMETERPROB to the list of ICMP message types handled by icmp_unreach(). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Correct comparisons and calculations using skb->tail and ↵Simon Horman2013-05-281-1/+2
| | | | | | | | | | | | | skb-transport_header This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv6: Add IPv6 support to the ping socket.Lorenzo Colitti2013-05-251-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add MIB counters for checksum errorsEric Dumazet2013-04-291-1/+3
| | | | | | | | | | | | | | | | Add MIB counters for checksum errors in IP layer, and TCP/UDP/ICMP layers, to help diagnose problems. $ nstat -a | grep Csum IcmpInCsumErrors 72 0.0 TcpInCsumErrors 382 0.0 UdpInCsumErrors 463221 0.0 Icmp6InCsumErrors 75 0.0 Udp6InCsumErrors 173442 0.0 IpExtInCsumErrors 10884 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: fix error handling in icmp_protocol.Li Wei2013-02-221-0/+23
| | | | | | | | | | | | Now we handle icmp errors in each transport protocol's err_handler, for icmp protocols, that is ping_err. Since this handler only care of those icmp errors triggered by echo request, errors triggered by echo reply(which sent by kernel) are sliently ignored. So wrap ping_err() with icmp_err() to deal with those icmp errors. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: avoid passing NULL to inet_putpeer() in icmpv4_xrlim_allow()Neal Cardwell2012-11-261-1/+2
| | | | | | | | | | | | | inet_getpeer_v4() can return NULL under OOM conditions, and while inet_peer_xrlim_allow() is OK with a NULL peer, inet_putpeer() will crash. This code path now uses the same idiom as the others from: 1d861aa4b3fb08822055345f480850205ffe6170 ("inet: Minimize use of cached route inetpeer."). Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Prepare for change of rt->rt_iif encoding.David S. Miller2012-07-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | Use inet_iif() consistently, and for TCP record the input interface of cached RX dst in inet sock. rt->rt_iif is going to be encoded differently, so that we can legitimately cache input routes in the FIB info more aggressively. When the input interface is "use SKB device index" the rt->rt_iif will be set to zero. This forces us to move the TCP RX dst cache installation into the ipv4 specific code, and as well it should since doing the route caching for ipv6 is pointless at the moment since it is not inspected in the ipv6 input paths yet. Also, remove the unlikely on dst->obsolete, all ipv4 dsts have obsolete set to a non-zero value to force invocation of the check callback. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Really ignore ICMP address requests/replies.David S. Miller2012-07-231-82/+2
| | | | | | | | | | | Alexey removed kernel side support for requests, and the only thing we do for replies is log a message if something doesn't look right. As Alexey's comment indicates, this belongs in userspace (if anywhere), and thus we can safely just get rid of this code. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Put proper checks into icmp_socket_deliver().David S. Miller2012-07-121-6/+6
| | | | | | | | | All handler->err() routines expect that we've done a pskb_may_pull() test to make sure that IP header length + 8 bytes can be safely pulled. Reported-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Kill ip_rt_redirect().David S. Miller2012-07-111-1/+0
| | | | | | | No longer needed, as the protocol handlers now all properly propagate the redirect back into the routing code. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Rearrange arguments to ip_rt_redirect()David S. Miller2012-07-111-30/+6
| | | | | | | | Pass in the SKB rather than just the IP addresses, so that policy and other aspects can reside in ip_rt_redirect() rather then icmp_redirect(). Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Deliver ICMP redirects to sockets too.David S. Miller2012-07-111-7/+1
| | | | | | And thus, we can remove the ping_err() hack. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Pull icmp socket delivery out into a helper function.David S. Miller2012-07-111-15/+16
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: Minimize use of cached route inetpeer.David S. Miller2012-07-101-1/+2
| | | | | | | | | | | | Only use it in the absolutely required cases: 1) COW'ing metrics 2) ipv4 PMTU 3) ipv4 redirects Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Create and use fib_compute_spec_dst() helper.David S. Miller2012-06-281-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The specific destination is the host we direct unicast replies to. Usually this is the original packet source address, but if we are responding to a multicast or broadcast packet we have to use something different. Specifically we must use the source address we would use if we were to send a packet to the unicast source of the original packet. The routing cache precomputes this value, but we want to remove that precomputation because it creates a hard dependency on the expensive rpfilter source address validation which we'd like to make cheaper. There are only three places where this matters: 1) ICMP replies. 2) pktinfo CMSG 3) IP options Now there will be no real users of rt->rt_spec_dst and we can simply remove it altogether. Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: Sanitize inet{,6} protocol demux.David S. Miller2012-06-191-5/+4
| | | | | | | | | | | | Don't pretend that inet_protos[] and inet6_protos[] are hashes, thay are just a straight arrays. Remove all unnecessary hash masking. Document MAX_INET_PROTOS. Use RAW_HTABLE_SIZE when appropriate. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Kill ip_rt_frag_needed().David S. Miller2012-06-111-3/+1
| | | | | | | | | | | | | | | | | | | | | | There is zero point to this function. It's only real substance is to perform an extremely outdated BSD4.2 ICMP check, which we can safely remove. If you really have a MTU limited link being routed by a BSD4.2 derived system, here's a nickel go buy yourself a real router. The other actions of ip_rt_frag_needed(), checking and conditionally updating the peer, are done by the per-protocol handlers of the ICMP event. TCP, UDP, et al. have a handler which will receive this event and transmit it back into the associated route via dst_ops->update_pmtu(). This simplification is important, because it eliminates the one place where we do not have a proper route context in which to make an inetpeer lookup. Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: Create and use rt{,6}_get_peer_create().David S. Miller2012-06-081-3/+2
| | | | | | | | | | | There's a lot of places that open-code rt{,6}_get_peer() only because they want to set 'create' to one. So add an rt{,6}_get_peer_create() for their sake. There were also a few spots open-coding plain rt{,6}_get_peer() and those are transformed here as well. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches2012-05-151-11/+9
| | | | | | | | | | Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Remove all #inclusions of asm/system.hDavid Howells2012-03-281-1/+0
| | | | | | | | | Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
* net: ipv4: Standardize prefixes for message loggingJoe Perches2012-03-121-2/+4
| | | | | | | | | | | | | | | | Add #define pr_fmt(fmt) as appropriate. Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files. Standardize on "UDPLite: " for appropriate uses. Some prefixes were previously "UDPLITE: " and "UDP-Lite: ". Add KBUILD_MODNAME ": " to icmp and gre. Remove embedded prefixes as appropriate. Add missing "\n" to pr_info in gre.c. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud