summaryrefslogtreecommitdiffstats
path: root/net/dsa/port.c
Commit message (Collapse)AuthorAgeFilesLines
* net: dsa: Don't add vlans when vlan filtering is disabledAndrew Lunn2017-11-101-2/+8
| | | | | | | | | | | | | | The software bridge can be build with vlan filtering support included. However, by default it is turned off. In its turned off state, it still passes VLANs via switchev, even though they are not to be used. Don't pass these VLANs to the hardware. Only do so when vlan filtering is enabled. This fixes at least one corner case. There are still issues in other corners, such as when vlan_filtering is later enabled. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add more const attributesAndrew Lunn2017-11-101-3/+3
| | | | | | | | | The notify mechanism does not need to modify the port it is notifying. So make the parameter const. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: move fixed link registration helpersVivien Didelot2017-10-281-0/+47
| | | | | | | | | | | | The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add port enable and disable helpersVivien Didelot2017-09-251-1/+30
| | | | | | | | | | | Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add port fdb dumpVivien Didelot2017-09-211-0/+11
| | | | | | | | | | Dumping a DSA port's FDB entries is not specific to a DSA slave, so add a dsa_port_fdb_dump function, similarly to dsa_port_fdb_add and dsa_port_fdb_del. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky2017-08-071-11/+0
| | | | | | | | | >From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Remove redundant MDB dump supportArkadi Sharshevsky2017-08-071-11/+0
| | | | | | | | | Currently the MDB HW database is synced with the bridge's one, thus, There is no need to support special dump functionality. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Remove support for bypass bridge port attributes/vlan setArkadi Sharshevsky2017-08-071-12/+0
| | | | | | | | | | The bridge port attributes/vlan for DSA devices should be set only from bridge code. Furthermore, The vlans are synced totally with the bridge so there is no need for special dump support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Remove switchdev dependency from DSA switch notifier chainArkadi Sharshevsky2017-08-071-6/+9
| | | | | | | | | | | | Currently, the switchdev objects are embedded inside the DSA notifier info. This patch removes this dependency. This is done as a preparation stage before adding support for learning FDB through the switchdev notification chain. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Remove prepare phase for FDBArkadi Sharshevsky2017-08-071-3/+1
| | | | | | | | | | | | | | | The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: support cross-chip ageing timeVivien Didelot2017-05-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the switchdev bridge ageing time attribute is propagated to all switch chips of the fabric, each switch can check if the requested value is valid and program itself, so that the whole fabric shares a common ageing time setting. This is especially needed for switch chips in between others, containing no bridge port members but evidently used in the data path. To achieve that, remove the condition which skips the other switches. We also don't need to identify the target switch anymore, thus remove the sw_index member of the dsa_notifier_ageing_time_info notifier structure. On ZII Dev Rev B (with two 88E6352 and one 88E6185) and ZII Dev Rev C (with two 88E6390X), we have the following hardware configuration: # ip link add name br0 type bridge # ip link set master br0 dev lan6 br0: port 1(lan6) entered blocking state br0: port 1(lan6) entered disabled state # echo 2000 > /sys/class/net/br0/bridge/ageing_time Before this patch: zii-rev-b# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 300000 300000 15000 zii-rev-c# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 300000 18750 After this patch: zii-rev-b# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 15000 15000 15000 zii-rev-c# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 18750 18750 Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add VLAN notifierVivien Didelot2017-05-221-16/+13
| | | | | | | | | | | | Add two new DSA_NOTIFIER_VLAN_ADD and DSA_NOTIFIER_VLAN_DEL events to notify not only a single switch, but all switches of a the fabric when an VLAN entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add MDB notifierVivien Didelot2017-05-221-16/+13
| | | | | | | | | | | | Add two new DSA_NOTIFIER_MDB_ADD and DSA_NOTIFIER_MDB_DEL events to notify not only a single switch, but all switches of a the fabric when an MDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add FDB notifierVivien Didelot2017-05-221-16/+13
| | | | | | | | | | | | Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to notify not only a single switch, but all switches of a the fabric when an FDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add notifier for ageing timeVivien Didelot2017-05-221-29/+8
| | | | | | | | | | | | | | | | This patch keeps the port-wide ageing time handling code in dsa_port_ageing_time, pushes the requested ageing time value in a new switch fabric notification, and moves the switch-wide ageing time handling code in dsa_switch_ageing_time. This has the effect that now not only the switch that the target port belongs to can be programmed, but all switches composing the switch fabric. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: move VLAN handlersVivien Didelot2017-05-221-0/+41
| | | | | | | | | Move the DSA port code which handles VLAN objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: move MDB handlersVivien Didelot2017-05-221-0/+40
| | | | | | | | | Move the DSA port code which handles MDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: move FDB handlersVivien Didelot2017-05-221-0/+40
| | | | | | | | | Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: move ageing time setterVivien Didelot2017-05-221-0/+40
| | | | | | | | | Move the DSA port code which sets a port ageing time in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: move VLAN filtering setterVivien Didelot2017-05-221-0/+16
| | | | | | | | | Move the DSA port code which sets VLAN filtering on a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: move bridging routinesVivien Didelot2017-05-221-0/+58
| | | | | | | | Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: move port state settersVivien Didelot2017-05-221-0/+55
Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud