summaryrefslogtreecommitdiffstats
path: root/net/dccp
Commit message (Collapse)AuthorAgeFilesLines
* inet: move ipv6only in sock_commonEric Dumazet2014-07-011-3/+1
| | | | | | | | | | | | | | | | | When an UDP application switches from AF_INET to AF_INET6 sockets, we have a small performance degradation for IPv4 communications because of extra cache line misses to access ipv6only information. This can also be noticed for TCP listeners, as ipv6_only_sock() is also used from __inet_lookup_listener()->compute_score() This is magnified when SO_REUSEPORT is used. Move ipv6only into struct sock_common so that it is available at no extra cost in lookups. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove inet6_reqsk_allocOctavian Purdila2014-06-271-1/+1
| | | | | | | | | | | | | Since pktops is only used for IPv6 only and opts is used for IPv4 only, we can move these fields into a union and this allows us to drop the inet6_reqsk_alloc function as after this change it becomes equivalent with inet_reqsk_alloc. This patch also fixes a kmemcheck issue in the IPv6 stack: the flags field was not annotated after a request_sock was allocated. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Eliminate no_check from protoswTom Herbert2014-05-231-1/+0
| | | | | | | | | | It doesn't seem like an protocols are setting anything other than the default, and allowing to arbitrarily disable checksums for a whole protocol seems dangerous. This can be done on a per socket basis. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/dccp/timer.c: use 'u64' instead of 's64' to avoid compiler's warningChen Gang2014-05-221-1/+1
| | | | | | | | | | | | | | | | | | | 'dccp_timestamp_seed' is initialized once by ktime_get_real() in dccp_timestamping_init(). It is always less than ktime_get_real() in dccp_timestamp(). Then, ktime_us_delta() in dccp_timestamp() will always return positive number. So can use manual type cast to let compiler and do_div() know about it to avoid warning. The related warning (with allmodconfig under unicore32): CC [M] net/dccp/timer.o net/dccp/timer.c: In function ‘dccp_timestamp’: net/dccp/timer.c:285: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dccp: make the request_retries minimum is 1wangweidong2014-05-141-1/+2
| | | | | | | | | | In Documentation/networking/dccp.txt points that request_retries should be greater than 0. So make the extra1 to be &one instead of &zero. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: clean up snmp stats codeWANG Cong2014-05-071-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8f0ea0fe3a036a47767f9c80e (snmp: reduce percpu needs by 50%) reduced snmp array size to 1, so technically it doesn't have to be an array any more. What's more, after the following commit: commit 933393f58fef9963eac61db8093689544e29a600 Date: Thu Dec 22 11:58:51 2011 -0600 percpu: Remove irqsafe_cpu_xxx variants We simply say that regular this_cpu use must be safe regardless of preemption and interrupt state. That has no material change for x86 and s390 implementations of this_cpu operations. However, arches that do not provide their own implementation for this_cpu operations will now get code generated that disables interrupts instead of preemption. probably no arch wants to have SNMP_ARRAY_SZ == 2. At least after almost 3 years, no one complains. So, just convert the array to a single pointer and remove snmp_mib_init() and snmp_mib_free() as well. Cc: Christoph Lameter <cl@linux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: add a sock pointer to ip_queue_xmit()Eric Dumazet2014-04-151-1/+1
| | | | | | | | | | | | | | | | ip_queue_xmit() assumes the skb it has to transmit is attached to an inet socket. Commit 31c70d5956fc ("l2tp: keep original skb ownership") changed l2tp to not change skb ownership and thus broke this assumption. One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(), so that we do not assume skb->sk points to the socket used by l2tp tunnel. Fixes: 31c70d5956fc ("l2tp: keep original skb ownership") Reported-by: Zhan Jianyu <nasa4836@gmail.com> Tested-by: Zhan Jianyu <nasa4836@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller2014-04-112-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
* dccp: re-enable debug macroGerrit Renker2014-02-162-1/+2
| | | | | | | | | | | | dccp tfrc: revert This reverts 6aee49c558de ("dccp: make local variable static") since the variable tfrc_debug is referenced by the tfrc_pr_debug(fmt, ...) macro when TFRC debugging is enabled. If it is enabled, use of the macro produces a compilation error. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: introduce hardened ip_no_pmtu_disc modeHannes Frederic Sowa2014-01-131-0/+1
| | | | | | | | | | | | | | | | | | | This new ip_no_pmtu_disc mode only allowes fragmentation-needed errors to be honored by protocols which do more stringent validation on the ICMP's packet payload. This knob is useful for people who e.g. want to run an unmodified DNS server in a namespace where they need to use pmtu for TCP connections (as they are used for zone transfers or fallback for requests) but don't want to use possibly spoofed UDP pmtu information. Currently the whitelisted protocols are TCP, SCTP and DCCP as they check if the returned packet is in the window or if the association is valid. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: John Heffner <johnwheffner@gmail.com> Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-01-061-12/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c net/ipv6/ip6_tunnel.c net/ipv6/ip6_vti.c ipv6 tunnel statistic bug fixes conflicting with consolidation into generic sw per-cpu net stats. qlogic conflict between queue counting bug fix and the addition of multiple MAC address support. Signed-off-by: David S. Miller <davem@davemloft.net>
| * dccp: catch failed request_module call in dccp_probe initWang Weidong2013-12-191-12/+7
| | | | | | | | | | | | | | | | | | Check the return value of request_module during dccp_probe initialisation, bail out if that call fails. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dccp: make local variable staticstephen hemminger2014-01-042-2/+1
| | | | | | | | | | | | | | Make DCCP module config variable static, only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dccp: remove obsolete codestephen hemminger2014-01-042-33/+0
| | | | | | | | | | | | | | | | This function is defined but not used. Remove it now, can be resurrected if ever needed. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2013-12-192-5/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2013-12-19 1) Use the user supplied policy index instead of a generated one if present. From Fan Du. 2) Make xfrm migration namespace aware. From Fan Du. 3) Make the xfrm state and policy locks namespace aware. From Fan Du. 4) Remove ancient sleeping when the SA is in acquire state, we now queue packets to the policy instead. This replaces the sleeping code. 5) Remove FLOWI_FLAG_CAN_SLEEP. This was used to notify xfrm about the posibility to sleep. The sleeping code is gone, so remove it. 6) Check user specified spi for IPComp. Thr spi for IPcomp is only 16 bit wide, so check for a valid value. From Fan Du. 7) Export verify_userspi_info to check for valid user supplied spi ranges with pfkey and netlink. From Fan Du. 8) RFC3173 states that if the total size of a compressed payload and the IPComp header is not smaller than the size of the original payload, the IP datagram must be sent in the original non-compressed form. These packets are dropped by the inbound policy check because they are not transformed. Document the need to set 'level use' for IPcomp to receive such packets anyway. From Fan Du. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: Remove FLOWI_FLAG_CAN_SLEEPSteffen Klassert2013-12-062-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | FLOWI_FLAG_CAN_SLEEP was used to notify xfrm about the posibility to sleep until the needed states are resolved. This code is gone, so FLOWI_FLAG_CAN_SLEEP is not needed anymore. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* | | ipv6: support IPV6_PMTU_INTERFACE on socketsHannes Frederic Sowa2013-12-181-0/+3
| |/ |/| | | | | | | | | | | | | | | | | | | | | IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it nontheless for symmetry with IPv4 sockets. Also drop incoming MTU information if this mode is enabled. The additional bit in ipv6_pinfo just eats in the padding behind the bitfield. There are no changes to the layout of the struct at all. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: do not erase dst address with flow label destinationFlorent Fourcot2013-12-101-1/+0
|/ | | | | | | | | | | | | | | | This patch is following b579035ff766c9412e2b92abf5cab794bff102b6 "ipv6: remove old conditions on flow label sharing" Since there is no reason to restrict a label to a destination, we should not erase the destination value of a socket with the value contained in the flow label storage. This patch allows to really have the same flow label to more than one destination. Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: introduce new IP_MTU_DISCOVER mode IP_PMTUDISC_INTERFACEHannes Frederic Sowa2013-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sockets marked with IP_PMTUDISC_INTERFACE won't do path mtu discovery, their sockets won't accept and install new path mtu information and they will always use the interface mtu for outgoing packets. It is guaranteed that the packet is not fragmented locally. But we won't set the DF-Flag on the outgoing frames. Florian Weimer had the idea to use this flag to ensure DNS servers are never generating outgoing fragments. They may well be fragmented on the path, but the server never stores or usees path mtu values, which could well be forged in an attack. (The root of the problem with path MTU discovery is that there is no reliable way to authenticate ICMP Fragmentation Needed But DF Set messages because they are sent from intermediate routers with their source addresses, and the IMCP payload will not always contain sufficient information to identify a flow.) Recent research in the DNS community showed that it is possible to implement an attack where DNS cache poisoning is feasible by spoofing fragments. This work was done by Amir Herzberg and Haya Shulman: <https://sites.google.com/site/hayashulman/files/fragmentation-poisoning.pdf> This issue was previously discussed among the DNS community, e.g. <http://www.ietf.org/mail-archive/web/dnsext/current/msg01204.html>, without leading to fixes. This patch depends on the patch "ipv4: fix DO and PROBE pmtu mode regarding local fragmentation with UFO/CORK" for the enforcement of the non-fragmentable checks. If other users than ip_append_page/data should use this semantic too, we have to add a new flag to IPCB(skb)->flags to suppress local fragmentation and check for this in ip_finish_output. Many thanks to Florian Weimer for the idea and feedback while implementing this patch. Cc: David S. Miller <davem@davemloft.net> Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dccp: Remove extern from function prototypesJoe Perches2013-10-197-158/+148
| | | | | | | | | | | | | There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: rename ir_loc_port to ir_numEric Dumazet2013-10-103-7/+7
| | | | | | | | | | | | | | | | | In commit 634fb979e8f ("inet: includes a sock_common in request_sock") I forgot that the two ports in sock_common do not have same byte order : skc_dport is __be16 (network order), but skc_num is __u16 (host order) So sparse complains because ir_loc_port (mapped into skc_num) is considered as __u16 while it should be __be16 Let rename ir_loc_port to ireq->ir_num (analogy with inet->inet_num), and perform appropriate htons/ntohs conversions. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: includes a sock_common in request_sockEric Dumazet2013-10-105-46/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | TCP listener refactoring, part 5 : We want to be able to insert request sockets (SYN_RECV) into main ehash table instead of the per listener hash table to allow RCU lookups and remove listener lock contention. This patch includes the needed struct sock_common in front of struct request_sock This means there is no more inet6_request_sock IPv6 specific structure. Following inet_request_sock fields were renamed as they became macros to reference fields from struct sock_common. Prefix ir_ was chosen to avoid name collisions. loc_port -> ir_loc_port loc_addr -> ir_loc_addr rmt_addr -> ir_rmt_addr rmt_port -> ir_rmt_port iif -> ir_iif Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: make lookups simpler and fasterEric Dumazet2013-10-093-18/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp/dccp: remove twchainEric Dumazet2013-10-081-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net:dccp: do not report ICMP redirects to user spaceDuan Jiong2013-09-181-0/+1
| | | | | | | | | | DCCP shouldn't be setting sk_err on redirects as it isn't an error condition. it should be doing exactly what tcp is doing and leaving the error handler without touching the socket. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add sk_stream_is_writeable() helperEric Dumazet2013-07-241-2/+2
| | | | | | | | | | | | | | | Several call sites use the hardcoded following condition : sk_stream_wspace(sk) >= sk_stream_min_wspace(sk) Lets use a helper because TCP_NOTSENT_LOWAT support will change this condition for TCP sockets. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: Remove TCPCTChristoph Paasch2013-03-172-6/+4
| | | | | | | | | | | | | | | | | | | | TCPCT uses option-number 253, reserved for experimental use and should not be used in production environments. Further, TCPCT does not fully implement RFC 6013. As a nice side-effect, removing TCPCT increases TCP's performance for very short flows: Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests for files of 1KB size. before this patch: average (among 7 runs) of 20845.5 Requests/Second after: average (among 7 runs) of 21403.6 Requests/Second Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds2013-02-212-5/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
| * net/dccp: remove depends on CONFIG_EXPERIMENTALKees Cook2013-01-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Gerrit Renker <gerrit@erg.abdn.ac.uk> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
| * net/dccp/ccids: remove depends on CONFIG_EXPERIMENTALKees Cook2013-01-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Gerrit Renker <gerrit@erg.abdn.ac.uk> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
* | net: proc: change proc_net_remove to remove_proc_entryGao feng2013-02-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: proc: change proc_net_fops_create to proc_createGao feng2013-02-181-1/+1
|/ | | | | | | | | | | | | Right now, some modules such as bonding use proc_create to create proc entries under /proc/net/, and other modules such as ipv4 use proc_net_fops_create. It looks a little chaos.this patch changes all of proc_net_fops_create to proc_create. we can remove proc_net_fops_create after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: Fix kmemleak in tcp_v4/6_syn_recv_sock and dccp_v4/6_request_recv_sockChristoph Paasch2012-12-142-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If in either of the above functions inet_csk_route_child_sock() or __inet_inherit_port() fails, the newsk will not be freed: unreferenced object 0xffff88022e8a92c0 (size 1592): comm "softirq", pid 0, jiffies 4294946244 (age 726.160s) hex dump (first 32 bytes): 0a 01 01 01 0a 01 01 02 00 00 00 00 a7 cc 16 00 ................ 02 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8153d190>] kmemleak_alloc+0x21/0x3e [<ffffffff810ab3e7>] kmem_cache_alloc+0xb5/0xc5 [<ffffffff8149b65b>] sk_prot_alloc.isra.53+0x2b/0xcd [<ffffffff8149b784>] sk_clone_lock+0x16/0x21e [<ffffffff814d711a>] inet_csk_clone_lock+0x10/0x7b [<ffffffff814ebbc3>] tcp_create_openreq_child+0x21/0x481 [<ffffffff814e8fa5>] tcp_v4_syn_recv_sock+0x3a/0x23b [<ffffffff814ec5ba>] tcp_check_req+0x29f/0x416 [<ffffffff814e8e10>] tcp_v4_do_rcv+0x161/0x2bc [<ffffffff814eb917>] tcp_v4_rcv+0x6c9/0x701 [<ffffffff814cea9f>] ip_local_deliver_finish+0x70/0xc4 [<ffffffff814cec20>] ip_local_deliver+0x4e/0x7f [<ffffffff814ce9f8>] ip_rcv_finish+0x1fc/0x233 [<ffffffff814cee68>] ip_rcv+0x217/0x267 [<ffffffff814a7bbe>] __netif_receive_skb+0x49e/0x553 [<ffffffff814a7cc3>] netif_receive_skb+0x50/0x82 This happens, because sk_clone_lock initializes sk_refcnt to 2, and thus a single sock_put() is not enough to free the memory. Additionally, things like xfrm, memcg, cookie_values,... may have been initialized. We have to free them properly. This is fixed by forcing a call to tcp_done(), ending up in inet_csk_destroy_sock, doing the final sock_put(). tcp_done() is necessary, because it ends up doing all the cleanup on xfrm, memcg, cookie_values, xfrm,... Before calling tcp_done, we have to set the socket to SOCK_DEAD, to force it entering inet_csk_destroy_sock. To avoid the warning in inet_csk_destroy_sock, inet_num has to be set to 0. As inet_csk_destroy_sock does a dec on orphan_count, we first have to increase it. Calling tcp_done() allows us to remove the calls to tcp_clear_xmit_timer() and tcp_cleanup_congestion_control(). A similar approach is taken for dccp by calling dccp_done(). This is in the kernel since 093d282321 (tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()), thus since version >= 2.6.37. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: better retrans tracking for defer-acceptEric Dumazet2012-11-031-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For passive TCP connections using TCP_DEFER_ACCEPT facility, we incorrectly increment req->retrans each time timeout triggers while no SYNACK is sent. SYNACK are not sent for TCP_DEFER_ACCEPT that were established (for which we received the ACK from client). Only the last SYNACK is sent so that we can receive again an ACK from client, to move the req into accept queue. We plan to change this later to avoid the useless retransmit (and potential problem as this SYNACK could be lost) TCP_INFO later gives wrong information to user, claiming imaginary retransmits. Decouple req->retrans field into two independent fields : num_retrans : number of retransmit num_timeout : number of timeouts num_timeout is the counter that is incremented at each timeout, regardless of actual SYNACK being sent or not, and used to compute the exponential timeout. Introduce inet_rtx_syn_ack() helper to increment num_retrans only if ->rtx_syn_ack() succeeded. Use inet_rtx_syn_ack() from tcp_check_req() to increment num_retrans when we re-send a SYNACK in answer to a (retransmitted) SYN. Prior to this patch, we were not counting these retransmits. Change tcp_v[46]_rtx_synack() to increment TCP_MIB_RETRANSSEGS only if a synack packet was successfully queued. Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Elliott Hughes <enh@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dccp: fix info leak via getsockopt(DCCP_SOCKOPT_CCID_TX_INFO)Mathias Krause2012-08-151-0/+1
| | | | | | | | | | | | The CCID3 code fails to initialize the trailing padding bytes of struct tfrc_tx_info added for alignment on 64 bit architectures. It that for potentially leaks four bytes kernel stack via the getsockopt() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* dccp: check ccid before dereferencingMathias Krause2012-08-151-2/+2
| | | | | | | | | | | | ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with a NULL ccid pointer leading to a NULL pointer dereference. This could lead to a privilege escalation if the attacker is able to map page 0 and prepare it with a fake ccid_ops pointer. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Prepare for change of rt->rt_iif encoding.David S. Miller2012-07-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | Use inet_iif() consistently, and for TCP record the input interface of cached RX dst in inet sock. rt->rt_iif is going to be encoded differently, so that we can legitimately cache input routes in the FIB info more aggressively. When the input interface is "use SKB device index" the rt->rt_iif will be set to zero. This forces us to move the TCP RX dst cache installation into the ipv4 specific code, and as well it should since doing the route caching for ipv6 is pointless at the moment since it is not inspected in the ipv6 input paths yet. Also, remove the unlikely on dst->obsolete, all ipv4 dsts have obsolete set to a non-zero value to force invocation of the check callback. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Kill FLOWI_FLAG_RT_NOCACHE and associated code.David S. Miller2012-07-201-1/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Pass optional SKB and SK arguments to dst_ops->{update_pmtu,redirect}()David S. Miller2012-07-172-2/+2
| | | | | | | | | | | | | | | | This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Add helper inet6_csk_update_pmtu().David S. Miller2012-07-161-31/+4
| | | | | | This is the ipv6 version of inet_csk_update_pmtu(). Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Add helper inet_csk_update_pmtu().David S. Miller2012-07-161-9/+2
| | | | | | | | | | | | | | | This abstracts away the call to dst_ops->update_pmtu() so that we can transparently handle the fact that, in the future, the dst itself can be invalidated by the PMTU update (when we have non-host routes cached in sockets). So we try to rebuild the socket cached route after the method invocation if necessary. This isn't used by SCTP because it needs to cache dsts per-transport, and thus will need it's own local version of this helper. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove checks for dst_ops->redirect being NULL.David S. Miller2012-07-122-2/+2
| | | | | | No longer necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Add redirect support to all protocol icmp error handlers.David S. Miller2012-07-121-0/+7
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Add redirect support to all protocol icmp error handlers.David S. Miller2012-07-111-0/+11
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings2012-07-1011-5/+31
| | | | | | | | Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dccp: remove unnecessary codes in ipv6.cRongQing.Li2012-07-051-16/+5
| | | | | | | | | opt always equals np->opts, so it is meaningless to define opt, and check if opt does not equal np->opts and then try to free opt. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: tcp: dont cache output dst for syncookiesEric Dumazet2012-06-221-1/+1
| | | | | | | | | | Don't cache output dst for syncookies, as this adds pressure on IP route cache and rcu subsystem for no gain. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Handle PMTU in ICMP error handlers.David S. Miller2012-06-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One tricky issue on the ipv6 side vs. ipv4 is that the ICMP callouts to handle the error pass the 32-bit info cookie in network byte order whereas ipv4 passes it around in host byte order. Like the ipv4 side, we have two helper functions. One for when we have a socket context and one for when we do not. ip6ip6 tunnels are not handled here, because they handle PMTU events by essentially relaying another ICMP packet-too-big message back to the original sender. This patch allows us to get rid of rt6_do_pmtu_disc(). It handles all kinds of situations that simply cannot happen when we do the PMTU update directly using a fully resolved route. In fact, the "plen == 128" check in ip6_rt_update_pmtu() can very likely be removed or changed into a BUG_ON() check. We should never have a prefixed ipv6 route when we get there. Another piece of strange history here is that TCP and DCCP, unlike in ipv4, never invoke the update_pmtu() method from their ICMP error handlers. This is incredibly astonishing since this is the context where we have the most accurate context in which to make a PMTU update, namely we have a fully connected socket and associated cached socket route. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: include/net/sock.h cleanupEric Dumazet2012-05-171-2/+2
| | | | | | | | | | | bool/const conversions where possible __inline__ -> inline space cleanups Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert all sysctl registrations to register_net_sysctlEric W. Biederman2012-04-201-8/+1
| | | | | | | | | | | | This results in code with less boiler plate that is a bit easier to read. Additionally stops us from using compatibility code in the sysctl core, hastening the day when the compatibility code can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud