summaryrefslogtreecommitdiffstats
path: root/net/core/neighbour.c
Commit message (Collapse)AuthorAgeFilesLines
* neighbour: Fixed race condition at tbl->nhtMichel Machado2012-02-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | When the fixed race condition happens: 1. While function neigh_periodic_work scans the neighbor hash table pointed by field tbl->nht, it unlocks and locks tbl->lock between buckets in order to call cond_resched. 2. Assume that function neigh_periodic_work calls cond_resched, that is, the lock tbl->lock is available, and function neigh_hash_grow runs. 3. Once function neigh_hash_grow finishes, and RCU calls neigh_hash_free_rcu, the original struct neigh_hash_table that function neigh_periodic_work was using doesn't exist anymore. 4. Once back at neigh_periodic_work, whenever the old struct neigh_hash_table is accessed, things can go badly. Signed-off-by: Michel Machado <michel@digirati.com.br> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Use universal hash for NDISC.David S. Miller2011-12-281-3/+10
| | | | | | | | | In order to perform a proper universal hash on a vector of integers, we have to use different universal hashes on each vector element. Which means we need 4 different hash randoms for ipv6. Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: Remove unused neighbour layer ops."David S. Miller2011-12-191-0/+10
| | | | | | | | | This reverts commit 5c3ddec73d01a1fae9409c197078cb02c42238c3. S390 qeth driver actually still uses the setup ops. Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unused neighbour layer ops.David S. Miller2011-12-131-10/+0
| | | | | | | | It's simpler to just keep these things out until there is a real user of them, so we can see what the needs actually are, rather than keep these things around as useless overhead. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.David Miller2011-12-051-1/+1
| | | | | | | | To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Roland Dreier <roland@purestorage.com>
* neigh: Add device constructor/destructor capability.David Miller2011-11-301-1/+14
| | | | | | | If the neigh entry has device private state, it will need constructor/destructor ops. Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Add infrastructure for allocating device neigh privates.David Miller2011-11-301-3/+11
| | | | | | | | | netdev->neigh_priv_len records the private area length. This will trigger for neigh_table objects which set tbl->entry_size to zero, and the first instances of this will be forthcoming. Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Get rid of neigh_table->kmem_cachepDavid Miller2011-11-301-16/+2
| | | | | | | | | | | We are going to alloc for device specific private areas for neighbour entries, and in order to do that we have to move away from the fixed allocation size enforced by using neigh_table->kmem_cachep As a nice side effect we can now use kfree_rcu(). Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-11-261-1/+4
|\ | | | | | | | | Conflicts: net/ipv4/inet_diag.c
| * netns: fix proxy ARP entries listing on a netnsJorge Boncompte [DTI2]2011-11-251-1/+4
| | | | | | | | | | | | | | Skip entries from foreign network namespaces. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | neigh: new unresolved queue limitsEric Dumazet2011-11-141-51/+111
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Le mercredi 09 novembre 2011 à 16:21 -0500, David Miller a écrit : > From: David Miller <davem@davemloft.net> > Date: Wed, 09 Nov 2011 16:16:44 -0500 (EST) > > > From: Eric Dumazet <eric.dumazet@gmail.com> > > Date: Wed, 09 Nov 2011 12:14:09 +0100 > > > >> unres_qlen is the number of frames we are able to queue per unresolved > >> neighbour. Its default value (3) was never changed and is responsible > >> for strange drops, especially if IP fragments are used, or multiple > >> sessions start in parallel. Even a single tcp flow can hit this limit. > > ... > > > > Ok, I've applied this, let's see what happens :-) > > Early answer, build fails. > > Please test build this patch with DECNET enabled and resubmit. The > decnet neigh layer still refers to the removed ->queue_len member. > > Thanks. Ouch, this was fixed on one machine yesterday, but not the other one I used this morning, sorry. [PATCH V5 net-next] neigh: new unresolved queue limits unres_qlen is the number of frames we are able to queue per unresolved neighbour. Its default value (3) was never changed and is responsible for strange drops, especially if IP fragments are used, or multiple sessions start in parallel. Even a single tcp flow can hit this limit. $ arp -d 192.168.20.108 ; ping -c 2 -s 8000 192.168.20.108 PING 192.168.20.108 (192.168.20.108) 8000(8028) bytes of data. 8008 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.322 ms Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Kill bogus SMP protected debugging message.David S. Miller2011-11-011-5/+1
| | | | | | | | | | | | Whatever situations make this state legitimate when SMP also would be legitimate when !SMP and f.e. preemption is enabled. This is dubious enough that we should just delete it entirely. If we want to add debugging for neigh timer races, better more thorough mechanisms are needed. Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: fix rcu splat in neigh_update()roy.qing.li@gmail.com2011-10-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when use dst_get_neighbour to get neighbour, we need rcu_read_lock to protect, since dst_get_neighbour uses rcu_dereference. The bug was reported by Ari Savolainen <ari.m.savolainen@gmail.com> [ 105.612095] [ 105.612096] =================================================== [ 105.612100] [ INFO: suspicious rcu_dereference_check() usage. ] [ 105.612101] --------------------------------------------------- [ 105.612103] include/net/dst.h:91 invoked rcu_dereference_check() without protection! [ 105.612105] [ 105.612106] other info that might help us debug this: [ 105.612106] [ 105.612108] [ 105.612108] rcu_scheduler_active = 1, debug_locks = 0 [ 105.612110] 1 lock held by dnsmasq/2618: [ 105.612111] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815df8c7>] rtnl_lock+0x17/0x20 [ 105.612120] [ 105.612121] stack backtrace: [ 105.612123] Pid: 2618, comm: dnsmasq Not tainted 3.1.0-rc1 #41 [ 105.612125] Call Trace: [ 105.612129] [<ffffffff810ccdcb>] lockdep_rcu_dereference+0xbb/0xc0 [ 105.612132] [<ffffffff815dc5a9>] neigh_update+0x4f9/0x5f0 [ 105.612135] [<ffffffff815da001>] ? neigh_lookup+0xe1/0x220 [ 105.612139] [<ffffffff81639298>] arp_req_set+0xb8/0x230 [ 105.612142] [<ffffffff8163a59f>] arp_ioctl+0x1bf/0x310 [ 105.612146] [<ffffffff810baa40>] ? lock_hrtimer_base.isra.26+0x30/0x60 [ 105.612150] [<ffffffff8163fb75>] inet_ioctl+0x85/0x90 [ 105.612154] [<ffffffff815b5520>] sock_do_ioctl+0x30/0x70 [ 105.612157] [<ffffffff815b55d3>] sock_ioctl+0x73/0x280 [ 105.612162] [<ffffffff811b7698>] do_vfs_ioctl+0x98/0x570 [ 105.612165] [<ffffffff811a5c40>] ? fget_light+0x340/0x3a0 [ 105.612168] [<ffffffff811b7bbf>] sys_ioctl+0x4f/0x80 [ 105.612172] [<ffffffff816fdcab>] system_call_fastpath+0x16/0x1b Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: RongQing <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of github.com:davem330/netDavid S. Miller2011-09-221-2/+6
|\ | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
| * arp: fix rcu lockdep splat in arp_process()Eric Dumazet2011-08-241-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dave Jones reported a lockdep splat triggered by an arp_process() call from parp_redo(). Commit faa9dcf793be (arp: RCU changes) is the origin of the bug, since it assumed arp_process() was called under rcu_read_lock(), which is not true in this particular path. Instead of adding rcu_read_lock() in parp_redo(), I chose to add it in neigh_proxy_process() to take care of IPv6 side too. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- include/linux/inetdevice.h:209 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by setfiles/2123: #0: (&sb->s_type->i_mutex_key#13){+.+.+.}, at: [<ffffffff8114cbc4>] walk_component+0x1ef/0x3e8 #1: (&isec->lock){+.+.+.}, at: [<ffffffff81204bca>] inode_doinit_with_dentry+0x3f/0x41f #2: (&tbl->proxy_timer){+.-...}, at: [<ffffffff8106a803>] run_timer_softirq+0x157/0x372 #3: (class){+.-...}, at: [<ffffffff8141f256>] neigh_proxy_process +0x36/0x103 stack backtrace: Pid: 2123, comm: setfiles Tainted: G W 3.1.0-0.rc2.git7.2.fc16.x86_64 #1 Call Trace: <IRQ> [<ffffffff8108ca23>] lockdep_rcu_dereference+0xa7/0xaf [<ffffffff8146a0b7>] __in_dev_get_rcu+0x55/0x5d [<ffffffff8146a751>] arp_process+0x25/0x4d7 [<ffffffff8146ac11>] parp_redo+0xe/0x10 [<ffffffff8141f2ba>] neigh_proxy_process+0x9a/0x103 [<ffffffff8106a8c4>] run_timer_softirq+0x218/0x372 [<ffffffff8106a803>] ? run_timer_softirq+0x157/0x372 [<ffffffff8141f220>] ? neigh_stat_seq_open+0x41/0x41 [<ffffffff8108f2f0>] ? mark_held_locks+0x6d/0x95 [<ffffffff81062bb6>] __do_softirq+0x112/0x25a [<ffffffff8150d27c>] call_softirq+0x1c/0x30 [<ffffffff81010bf5>] do_softirq+0x4b/0xa2 [<ffffffff81062f65>] irq_exit+0x5d/0xcf [<ffffffff8150dc11>] smp_apic_timer_interrupt+0x7c/0x8a [<ffffffff8150baf3>] apic_timer_interrupt+0x73/0x80 <EOI> [<ffffffff8108f439>] ? trace_hardirqs_on_caller+0x121/0x158 [<ffffffff814fc285>] ? __slab_free+0x30/0x24c [<ffffffff814fc283>] ? __slab_free+0x2e/0x24c [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f [<ffffffff81204e74>] ? inode_doinit_with_dentry+0x2e9/0x41f [<ffffffff81130cb0>] kfree+0x108/0x131 [<ffffffff81204e74>] inode_doinit_with_dentry+0x2e9/0x41f [<ffffffff81204fc6>] selinux_d_instantiate+0x1c/0x1e [<ffffffff81200f4f>] security_d_instantiate+0x21/0x23 [<ffffffff81154625>] d_instantiate+0x5c/0x61 [<ffffffff811563ca>] d_splice_alias+0xbc/0xd2 [<ffffffff811b17ff>] ext4_lookup+0xba/0xeb [<ffffffff8114bf1e>] d_alloc_and_lookup+0x45/0x6b [<ffffffff8114cbea>] walk_component+0x215/0x3e8 [<ffffffff8114cdf8>] lookup_last+0x3b/0x3d [<ffffffff8114daf3>] path_lookupat+0x82/0x2af [<ffffffff8110fc53>] ? might_fault+0xa5/0xac [<ffffffff8110fc0a>] ? might_fault+0x5c/0xac [<ffffffff8114c564>] ? getname_flags+0x31/0x1ca [<ffffffff8114dd48>] do_path_lookup+0x28/0x97 [<ffffffff8114df2c>] user_path_at+0x59/0x96 [<ffffffff811467ad>] ? cp_new_stat+0xf7/0x10d [<ffffffff811469a6>] vfs_fstatat+0x44/0x6e [<ffffffff811469ee>] vfs_lstat+0x1e/0x20 [<ffffffff81146b3d>] sys_newlstat+0x1a/0x33 [<ffffffff8108f439>] ? trace_hardirqs_on_caller+0x121/0x158 [<ffffffff812535fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8150af82>] system_call_fastpath+0x16/0x1b Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | neigh: reduce arp latencyEric Dumazet2011-08-121-14/+26
|/ | | | | | | | | | | | | | | | | | | | | | | | | | Remove the artificial HZ latency on arp resolution. Instead of firing a timer in one jiffy (up to 10 ms if HZ=100), lets send the ARP message immediately. Before patch : # arp -d 192.168.20.108 ; ping -c 3 192.168.20.108 PING 192.168.20.108 (192.168.20.108) 56(84) bytes of data. 64 bytes from 192.168.20.108: icmp_seq=1 ttl=64 time=9.91 ms 64 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.065 ms 64 bytes from 192.168.20.108: icmp_seq=3 ttl=64 time=0.061 ms After patch : $ arp -d 192.168.20.108 ; ping -c 3 192.168.20.108 PING 192.168.20.108 (192.168.20.108) 56(84) bytes of data. 64 bytes from 192.168.20.108: icmp_seq=1 ttl=64 time=0.152 ms 64 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.064 ms 64 bytes from 192.168.20.108: icmp_seq=3 ttl=64 time=0.074 ms Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Abstract dst->neighbour accesses behind helpers.David S. Miller2011-07-171-3/+4
| | | | | | dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Pass neighbour entry to output ops.David S. Miller2011-07-171-11/+14
| | | | | | | | | | This will get us closer to being able to do "neigh stuff" completely independent of the underlying dst_entry for protocols (ipv4/ipv6) that wish to do so. We will also be able to make dst entries neigh-less. Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Kill ndisc_ops->queue_xmitDavid S. Miller2011-07-161-2/+2
| | | | | | It is always dev_queue_xmit(). Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Kill hh_cache->hh_outputDavid S. Miller2011-07-161-23/+2
| | | | | | | | It's just taking on one of two possible values, either neigh_ops->output or dev_queue_xmit(). And this is purely depending upon whether nud_state has NUD_CONNECTED set or not. Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Kill neigh_ops->hh_outputDavid S. Miller2011-07-161-2/+2
| | | | | | It's always dev_queue_xmit(). Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Simply destroy handling wrt. hh_cache.David S. Miller2011-07-161-9/+0
| | | | | | | | | | | Now that hh_cache entries are embedded inside of neighbour entries, their lifetimes and accesses are now synchronous to that of the encompassing neighbour object. Therefore we don't need to hook up the blackhole op to hh_output on destroy. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Embed hh_cache inside of struct neighbour.David S. Miller2011-07-141-59/+22
| | | | | | | | | | | | | | | Now that there is a one-to-one correspondance between neighbour and hh_cache entries, we no longer need: 1) dynamic allocation 2) attachment to dst->hh 3) refcounting Initialization of the hh_cache entry is indicated by hh_len being non-zero, and such initialization is always done with the neighbour's lock held as a writer. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Kill support for multiple hh_cache entries per neighbourDavid S. Miller2011-07-131-19/+18
| | | | | | | | | | | | | This never, ever, happens. Neighbour entries are always tied to one address family, and therefore one set of dst_ops, and therefore one dst_ops->protocol "hh_type" value. This capability was blindly imported by Alexey Kuznetsov when he wrote the neighbour layer. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Push protocol type directly down to header_ops->cache()David S. Miller2011-07-131-1/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Use universal hash for ARP.David S. Miller2011-07-111-0/+1
| | | | | | We need to make sure the multiplier is odd. Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Store hash shift instead of mask.David S. Miller2011-07-111-24/+23
| | | | | | | | | | | | | | | And mask the hash function result by simply shifting down the "->hash_shift" most significant bits. Currently which bits we use is arbitrary since jhash produces entropy evenly across the whole hash function result. But soon we'll be using universal hashing functions, and in those cases more entropy exists in the higher bits than the lower bits, because they use multiplies. Signed-off-by: David S. Miller <davem@davemloft.net>
* rtnetlink: Compute and store minimum ifinfo dump sizeGreg Rose2011-06-091-5/+6
| | | | | | | | | | | | | | | The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* neigh: __rcu annotationsEric Dumazet2011-01-201-6/+7
| | | | | | | fix some minor issues and sparse (__rcu) warnings Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: kill unused macrosShan Wei2010-12-191-1/+0
| | | | | | | These macros never be used, so remove them. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/neighbour: cancel_delayed_work() + flush_scheduled_work() -> ↵Tejun Heo2010-10-211-2/+1
| | | | | | | | | cancel_delayed_work_sync() flush_scheduled_work() is going away. Prepare for it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: Protect neigh->ha[] with a seqlockEric Dumazet2010-10-111-17/+30
| | | | | | | | | | | | | Add a seqlock in struct neighbour to protect neigh->ha[], and avoid dirtying neighbour in stress situation (many different flows / dsts) Dirtying takes place because of read_lock(&n->lock) and n->used writes. Switching to a seqlock, and writing n->used only on jiffies changes permits less dirtying. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: speedup neigh_hh_init()Eric Dumazet2010-10-111-38/+61
| | | | | | | | | | | | | | | | | | | | | | | | | When a new dst is used to send a frame, neigh_resolve_output() tries to associate an struct hh_cache to this dst, calling neigh_hh_init() with the neigh rwlock write locked. Most of the time, hh_cache is already known and linked into neighbour, so we find it and increment its refcount. This patch changes the logic so that we call neigh_hh_init() with neighbour lock read locked only, so that fast path can be run in parallel by concurrent cpus. This brings part of the speedup we got with commit c7d4426a98a5f (introduce DST_NOCACHE flag) for non cached dsts, even for cached ones, removing one of the contention point that routers hit on multiqueue enabled machines. Further improvements would need to use a seqlock instead of an rwlock to protect neigh->ha[], to not dirty neigh too often and remove two atomic ops. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: RCU conversion of struct neighbourEric Dumazet2010-10-061-52/+85
| | | | | | | | | | | | | | | | | | | This is the second step for neighbour RCU conversion. (first was commit d6bf7817 : RCU conversion of neigh hash table) neigh_lookup() becomes lockless, but still take a reference on found neighbour. (no more read_lock()/read_unlock() on tbl->lock) struct neighbour gets an additional rcu_head field and is freed after an RCU grace period. Future work would need to eventually not take a reference on neighbour for temporary dst (DST_NOCACHE), but this would need dst->_neighbour to use a noref bit like we did for skb->_dst. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net neigh: RCU conversion of neigh hash tableEric Dumazet2010-10-051-82/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | David This is the first step for RCU conversion of neigh code. Next patches will convert hash_buckets[] and "struct neighbour" to RCU protected objects. Thanks [PATCH net-next] net neigh: RCU conversion of neigh hash table Instead of storing hash_buckets, hash_mask and hash_rnd in "struct neigh_table", a new structure is defined : struct neigh_hash_table { struct neighbour **hash_buckets; unsigned int hash_mask; __u32 hash_rnd; struct rcu_head rcu; }; And "struct neigh_table" has an RCU protected pointer to such a neigh_hash_table. This means the signature of (*hash)() function changed: We need to add a third parameter with the actual hash_rnd value, since this is not anymore a neigh_table field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net neigh: neigh_delete() and neigh_add() changesEric Dumazet2010-10-051-22/+17
| | | | | | | | neigh_delete() and neigh_add() dont need to touch device refcount, we hold RTNL when calling them, so device cannot disappear under us. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: introduce DST_NOCACHE flagEric Dumazet2010-10-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While doing stress tests with IP route cache disabled, and multi queue devices, I noticed a very high contention on one rwlock used in neighbour code. When many cpus are trying to send frames (possibly using a high performance multiqueue device) to the same neighbour, they fight for the neigh->lock rwlock in order to call neigh_hh_init(), and fight on hh->hh_refcnt (a pair of atomic_inc/atomic_dec_and_test()) But we dont need to call neigh_hh_init() for dst that are used only once. It costs four atomic operations at least, on two contended cache lines, plus the high contention on neigh->lock rwlock. Introduce a new dst flag, DST_NOCACHE, that is set when dst was not inserted in route cache. With the stress test bench, sending 160000000 frames on one neighbour, results are : Before patch: real 2m28.406s user 0m11.781s sys 36m17.964s After patch: real 1m26.532s user 0m12.185s sys 20m3.903s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: return operator cleanupEric Dumazet2010-09-231-3/+3
| | | | | | | | | Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/core: neighbour update OopsDoug Kehn2010-07-141-1/+4
| | | | | | | | | | | | | | | | | | | | When configuring DMVPN (GRE + openNHRP) and a GRE remote address is configured a kernel Oops is observed. The obserseved Oops is caused by a NULL header_ops pointer (neigh->dev->header_ops) in neigh_update_hhs() when void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *) = neigh->dev->header_ops->cache_update; is executed. The dev associated with the NULL header_ops is the GRE interface. This patch guards against the possibility that header_ops is NULL. This Oops was first observed in kernel version 2.6.26.8. Signed-off-by: Doug Kehn <rdkehn@yahoo.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix __neigh_event_send()Eric Dumazet2010-05-281-0/+1
| | | | | | | | | | | | | | commit 7fee226ad23 (net: add a noref bit on skb dst) missed one spot where an skb is enqueued, with a possibly not refcounted dst entry. __neigh_event_send() inserts skb into arp_queue, so we must make sure dst entry is refcounted, or dst entry can be freed by garbage collector after caller exits from rcu protected section. Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* net: Annotates neigh_invalidate()Eric Dumazet2010-03-101-0/+2
| | | | | | | | Annotates neigh_invalidate() with __releases() and __acquires() for sparse sake. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net neigh: Decouple per interface neighbour table controls from binary sysctlsEric W. Biederman2010-02-161-3/+4
| | | | | | | | | | | | | | Stop computing the number of neighbour table settings we have by counting the number of binary sysctls. This behaviour was silly and meant that we could not add another neighbour table setting without also adding another binary sysctl. Don't pass the binary sysctl path for neighour table entries into neigh_sysctl_register. These parameters are no longer used and so are just dead code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: simplify seq_file codeAlexey Dobriyan2010-01-231-7/+4
| | | | | | | | Simpily pass 'struct neigh_table' with seq_file private pointer, and save one dereference. Proc entry itself isn't interesting. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2009-12-081-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits) mac80211: fix reorder buffer release iwmc3200wifi: Enable wimax core through module parameter iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter iwmc3200wifi: Coex table command does not expect a response iwmc3200wifi: Update wiwi priority table iwlwifi: driver version track kernel version iwlwifi: indicate uCode type when fail dump error/event log iwl3945: remove duplicated event logging code b43: fix two warnings ipw2100: fix rebooting hang with driver loaded cfg80211: indent regulatory messages with spaces iwmc3200wifi: fix NULL pointer dereference in pmkid update mac80211: Fix TX status reporting for injected data frames ath9k: enable 2GHz band only if the device supports it airo: Fix integer overflow warning rt2x00: Fix padding bug on L2PAD devices. WE: Fix set events not propagated b43legacy: avoid PPC fault during resume b43: avoid PPC fault during resume tcp: fix a timewait refcnt race ... Fix up conflicts due to sysctl cleanups (dead sysctl_check code and CTL_UNNUMBERED removed) in kernel/sysctl_check.c net/ipv4/sysctl_net_ipv4.c net/ipv6/addrconf.c net/sctp/sysctl.c
| * net: use net_eq to compare netsOctavian Purdila2009-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sysctl net: Remove unused binary sysctl codeEric W. Biederman2009-11-121-41/+6
|/ | | | | | | | | | | | | | | | Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
* neigh: Convert garbage collection from softirq to workqueueEric Dumazet2009-08-021-46/+43
| | | | | | | | | | | | | | | | | | Current neigh_periodic_timer() function is fired by timer IRQ, and scans one hash bucket each round (very litle work in fact) As we are supposed to scan whole hash table in 15 seconds, this means neigh_periodic_timer() can be fired very often. (depending on the number of concurrent hash entries we stored in this table) Converting this to a workqueue permits scanning whole table, minimizing icache pollution, and firing this work every 15 seconds, independantly of hash table size. This 15 seconds delay is not a hard number, as work is a deferrable one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Rename lookup_neigh_params functionTobias Klauser2009-07-131-3/+3
| | | | | | | | | Rename lookup_neigh_params to lookup_neigh_parms as the struct is named neigh_parms and all other functions dealing with the struct carry neigh_parms in their names. Signed-off-by: Tobias Klauser <klto@zhaw.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* neigh: fix state transition INCOMPLETE->FAILED via Netlink requestTimo Teras2009-06-111-18/+28
| | | | | | | | | | | | | | | | | The current code errors out the INCOMPLETE neigh entry skb queue only from the timer if maximum probes have been attempted and there has been no reply. This also causes the transtion to FAILED state. However, the neigh entry can be also updated via Netlink to inform that the address is unavailable. Currently, neigh_update() just stops the timers and leaves the pending skb's unreleased. This results that the clean up code in the timer callback is never called, preventing also proper garbage collection. This fixes neigh_update() to process the pending skb queue immediately if INCOMPLETE -> FAILED state transtion occurs due to a Netlink request. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud