summaryrefslogtreecommitdiffstats
path: root/net/ceph
Commit message (Collapse)AuthorAgeFilesLines
* libceph: do not dereference a NULL bio pointerIlya Dryomov2014-02-071-2/+6
| | | | | | | | | Commit f38a5181d9f3 ("ceph: Convert to immutable biovecs") introduced a NULL pointer dereference, which broke rbd in -rc1. Fix it. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* libceph: take map_sem for read in handle_reply()Ilya Dryomov2014-02-071-6/+11
| | | | | | | | | | | Handling redirect replies requires both map_sem and request_mutex. Taking map_sem unconditionally near the top of handle_reply() avoids possible race conditions that arise from releasing request_mutex to be able to acquire map_sem in redirect reply case. (Lock ordering is: map_sem, request_mutex, crush_mutex.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* libceph: factor out logic from ceph_osdc_start_request()Ilya Dryomov2014-02-071-23/+39
| | | | | | | | | Factor out logic from ceph_osdc_start_request() into a new helper, __ceph_osdc_start_request(). ceph_osdc_start_request() now amounts to taking locks and calling __ceph_osdc_start_request(). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* libceph: fix error handling in ceph_osdc_init()Ilya Dryomov2014-02-031-1/+4
| | | | | | | | msgpool_op_reply message pool isn't destroyed if workqueue construction fails. Fix it. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-blockLinus Torvalds2014-01-301-26/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block IO changes from Jens Axboe: "The major piece in here is the immutable bio_ve series from Kent, the rest is fairly minor. It was supposed to go in last round, but various issues pushed it to this release instead. The pull request contains: - Various smaller blk-mq fixes from different folks. Nothing major here, just minor fixes and cleanups. - Fix for a memory leak in the error path in the block ioctl code from Christian Engelmayer. - Header export fix from CaiZhiyong. - Finally the immutable biovec changes from Kent Overstreet. This enables some nice future work on making arbitrarily sized bios possible, and splitting more efficient. Related fixes to immutable bio_vecs: - dm-cache immutable fixup from Mike Snitzer. - btrfs immutable fixup from Muthu Kumar. - bio-integrity fix from Nic Bellinger, which is also going to stable" * 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits) xtensa: fixup simdisk driver to work with immutable bio_vecs block/blk-mq-cpu.c: use hotcpu_notifier() blk-mq: for_each_* macro correctness block: Fix memory leak in rw_copy_check_uvector() handling bio-integrity: Fix bio_integrity_verify segment start bug block: remove unrelated header files and export symbol blk-mq: uses page->list incorrectly blk-mq: use __smp_call_function_single directly btrfs: fix missing increment of bi_remaining Revert "block: Warn and free bio if bi_end_io is not set" block: Warn and free bio if bi_end_io is not set blk-mq: fix initializing request's start time block: blk-mq: don't export blk_mq_free_queue() block: blk-mq: make blk_sync_queue support mq block: blk-mq: support draining mq queue dm cache: increment bi_remaining when bi_end_io is restored block: fixup for generic bio chaining block: Really silence spurious compiler warnings block: Silence spurious compiler warnings block: Kill bio_pair_split() ...
| * ceph: Convert to immutable biovecsKent Overstreet2013-11-231-26/+17
| | | | | | | | | | | | | | | | | | | | | | Now that we've got a mechanism for immutable biovecs - bi_iter.bi_bvec_done - we need to convert drivers to use primitives that respect it instead of using the bvec array directly. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sage Weil <sage@inktank.com> Cc: ceph-devel@vger.kernel.org
* | libceph: follow redirect replies from osdsIlya Dryomov2014-01-271-9/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follow redirect replies from osds, for details see ceph.git commit fbbe3ad1220799b7bb00ea30fce581c5eadaf034. v1 (current) version of redirect reply consists of oloc and oid, which expands to pool, key, nspace, hash and oid. However, server-side code that would populate anything other than pool doesn't exist yet, and hence this commit adds support for pool redirects only. To make sure that future server-side updates don't break us, we decode all fields and, if any of key, nspace, hash or oid have a non-default value, error out with "corrupt osd_op_reply ..." message. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid}Ilya Dryomov2014-01-272-17/+17
| | | | | | | | | | | | | | | | Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before introducing r_target_{oloc,oid} needed for redirects. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: follow {read,write}_tier fields on osd request submissionIlya Dryomov2014-01-272-5/+53
| | | | | | | | | | | | | | | | | | | | | | Overwrite ceph_osd_request::r_oloc.pool with read_tier for read ops and write_tier for write and read+write ops (aka basic tiering support). {read,write}_tier are part of pg_pool_t since v9. This commit bumps our pg_pool_t decode compat version from v7 to v9, all new fields except for {read,write}_tier are ignored. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: add ceph_pg_pool_by_id()Ilya Dryomov2014-01-271-0/+5
| | | | | | | | | | | | | | | | "Lookup pool info by ID" function is hidden in osdmap.c. Expose it to the rest of libceph. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: replace ceph_calc_ceph_pg() with ceph_oloc_oid_to_pg()Ilya Dryomov2014-01-272-14/+19
| | | | | | | | | | | | | | | | Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename it to ceph_oloc_oid_to_pg() to make its purpose more clear. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: introduce and start using oid abstractionIlya Dryomov2014-01-272-9/+11
| | | | | | | | | | | | | | | | | | | | | | In preparation for tiering support, which would require having two (base and target) object names for each osd request and also copying those names around, introduce struct ceph_object_id (oid) and a couple helpers to facilitate those copies and encapsulate the fact that object name is not necessarily a NUL-terminated string. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LENIlya Dryomov2014-01-271-1/+1
| | | | | | | | | | | | | | | | In preparation for adding oid abstraction, rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LEN. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: start using oloc abstractionIlya Dryomov2014-01-271-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of relying on pool fields in ceph_file_layout (for mapping) and ceph_pg (for enconding), start using ceph_object_locator (oloc) abstraction. Note that userspace oloc currently consists of pool, key, nspace and hash fields, while this one contains only a pool. This is OK, because at this point we only send (i.e. encode) olocs and never have to receive (i.e. decode) them. This makes keeping a copy of ceph_file_layout in every osd request unnecessary, so ceph_osd_request::r_file_layout field is nuked. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: dout() is missing a newlineIlya Dryomov2014-01-261-2/+2
| | | | | | | | | | | | Add a missing newline to a dout() in __reset_osd(). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
* | libceph: add ceph_kv{malloc,free}() and switch to themIlya Dryomov2014-01-263-27/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Encapsulate kmalloc vs vmalloc memory allocation and freeing logic into two helpers, ceph_kvmalloc() and ceph_kvfree(), and switch to them. ceph_kvmalloc() kmalloc()'s a maximum of 8 pages, anything bigger is vmalloc()'ed with __GFP_HIGHMEM set. This changes the existing behaviour: - for buffers (ceph_buffer_new()), from trying to kmalloc() everything and using vmalloc() just as a fallback - for messages (ceph_msg_new()), from going to vmalloc() for anything bigger than a page - for messages (ceph_msg_new()), from disallowing vmalloc() to use high memory Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: fix preallocation check in get_reply()Ilya Dryomov2014-01-142-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check that makes sure that we have enough memory allocated to read in the entire header of the message in question is currently busted. It compares front_len of the incoming message with iov_len field of ceph_msg::front structure, which is used primarily to indicate the amount of data already read in, and not the size of the allocated buffer. Under certain conditions (e.g. a short read from a socket followed by that socket's shutdown and owning ceph_connection reset) this results in a warning similar to [85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0) and, through another bug, leads to forever hung tasks and forced reboots. Fix this by comparing front_len with front_alloc_len field of struct ceph_msg, which stores the actual size of the buffer. Fixes: http://tracker.ceph.com/issues/5425 Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: rename front to front_len in get_reply()Ilya Dryomov2014-01-141-4/+5
| | | | | | | | | | | | | | | | Rename front local variable to front_len in get_reply() to make its purpose more clear. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: rename ceph_msg::front_max to front_alloc_lenIlya Dryomov2014-01-142-7/+7
| | | | | | | | | | | | | | | | Rename front_max field of struct ceph_msg to front_alloc_len to make its purpose more clear. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: use CEPH_MON_PORT when the specified port is 0Ilya Dryomov2013-12-311-1/+3
| | | | | | | | | | | | | | | | | | Similar to userspace, don't bail with "parse_ips bad ip ..." if the specified port is port 0, instead use port CEPH_MON_PORT (6789, the default monitor port). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: fix crush_choose_firstn commentIlya Dryomov2013-12-311-1/+5
| | | | | | | | | | | | | | Reflects ceph.git commit 8b38f10bc2ee3643a33ea5f9545ad5c00e4ac5b4. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: attempts -> triesIlya Dryomov2013-12-311-8/+8
| | | | | | | | | | | | | | Reflects ceph.git commit ea3a0bb8b773360d73b8b77fa32115ef091c9857. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: add set_choose_local_[fallback_]tries stepsIlya Dryomov2013-12-311-5/+23
| | | | | | | | | | | | | | | | | | | | This allows all of the tunables to be overridden by a specific rule. Reflects ceph.git commits d129e09e57fbc61cfd4f492e3ee77d0750c9d292, 0497db49e5973b50df26251ed0e3f4ac7578e66e. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: generalize descend_onceIlya Dryomov2013-12-311-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The legacy behavior is to make the normal number of tries for the recursive chooseleaf call. The descend_once tunable changed this to making a single try and bail if we get a reject (note that it is impossible to collide in the recursive case). The new set_chooseleaf_tries lets you select the number of recursive chooseleaf attempts for indep mode, or default to 1. Use the same behavior for firstn, except default to total_tries when the legacy tunables are set (for compatibility). This makes the rule step override the (new) default of 1 recursive attempt, keeping behavior consistent with indep mode. Reflects ceph.git commit 685c6950ef3df325ef04ce7c986e36ca2514c5f1. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: CHOOSE_LEAF -> CHOOSELEAF throughoutIlya Dryomov2013-12-311-5/+5
| | | | | | | | | | | | | | | | | | | | This aligns the internal identifier names with the user-visible names in the decompiled crush map language. Reflects ceph.git commit caa0e22e15e4226c3671318ba1f61314bf6da2a6. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: add SET_CHOOSE_TRIES rule stepIlya Dryomov2013-12-311-0/+5
| | | | | | | | | | | | | | | | | | | | Since we can specify the recursive retries in a rule, we may as well also specify the non-recursive tries too for completeness. Reflects ceph.git commit d1b97462cffccc871914859eaee562f2786abfd1. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: apply chooseleaf_tries to firstn mode tooIlya Dryomov2013-12-311-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parameterize the attempts for the _firstn choose method, and apply the rule-specified tries count to firstn mode as well. Note that we have slightly different behavior here than with indep: If the firstn value is not specified for firstn, we pass through the normal attempt count. This maintains compatibility with legacy behavior. Note that this is usually *not* actually N^2 work, though, because of the descend_once tunable. However, descend_once is unfortunately *not* the same thing as 1 chooseleaf try because it is only checked on a reject but not on a collision. Sigh. In contrast, for indep, if tries is not specified we default to 1 recursive attempt, because that is simply more sane, and we have the option to do so. The descend_once tunable has no effect for indep. Reflects ceph.git commit 64aeded50d80942d66a5ec7b604ff2fcbf5d7b63. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: new SET_CHOOSE_LEAF_TRIES commandIlya Dryomov2013-12-311-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explicitly control the number of sample attempts, and allow the number of tries in the recursive call to be explicitly controlled via the rule. This is important because the amount of time we want to spend looking for a solution may be rule dependent (e.g., higher for the wide indep pool than the rep pools). (We should do the same for the other tunables, by the way!) Reflects ceph.git commit c43c893be872f709c787bc57f46c0e97876ff681. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: pass parent r value for indep callIlya Dryomov2013-12-311-4/+6
| | | | | | | | | | | | | | | | | | | | | | Pass down the parent's 'r' value so that we will sample different values in the recursive call when the parent tries multiple times. This avoids doing useless work (calling multiple times and trying the same values). Reflects ceph.git commit 2731d3030d7a3e80922b7f1b7756f9a4a124bac5. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: clarify numrep vs endposIlya Dryomov2013-12-311-8/+8
| | | | | | | | | | | | | | | | | | | | | | Pass numrep (the width of the result) separately from the number of results we want *this* iteration. This makes things less awkward when we do a recursive call (for chooseleaf) and want only one item. Reflects ceph.git commit 1b567ee08972f268c11b43fc881e57b5984dd08b. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: strip firstn conditionals out of crush_choose, renameIlya Dryomov2013-12-311-55/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that indep is handled by crush_choose_indep, rename crush_choose to crush_choose_firstn and remove all the conditionals. This ends up stripping out *lots* of code. Note that it *also* makes it obvious that the shenanigans we were playing with r' for uniform buckets were broken for firstn mode. This appears to have happened waaaay back in commit dae8bec9 (or earlier)... 2007. Reflects ceph.git commit 94350996cb2035850bcbece6a77a9b0394177ec9. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: add note about r in recursive chooseIlya Dryomov2013-12-311-0/+8
| | | | | | | | | | | | | | Reflects ceph.git commit 4551fee9ad89d0427ed865d766d0d44004d3e3e1. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: use breadth-first search for indep modeIlya Dryomov2013-12-311-9/+163
| | | | | | | | | | | | | | Reflects ceph.git commit 86e978036a4ecbac4c875e7c00f6c5bbe37282d3. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: return CRUSH_ITEM_UNDEF for failed placements with indepIlya Dryomov2013-12-311-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | For firstn mode, if we fail to make a valid placement choice, we just continue and return a short result to the caller. For indep mode, however, we need to make the position stable, and return an undefined value on failed placements to avoid shifting later results to the left. Reflects ceph.git commit b1d4dd4eb044875874a1d01c01c7d766db5d0a80. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: eliminate CRUSH_MAX_SET result size limitationIlya Dryomov2013-12-312-7/+19
| | | | | | | | | | | | | | | | | | | | | | This is only present to size the temporary scratch arrays that we put on the stack. Let the caller allocate them as they wish and remove the limitation. Reflects ceph.git commit 1cfe140bf2dab99517589a82a916f4c75b9492d1. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: fix some commentsIlya Dryomov2013-12-311-1/+1
| | | | | | | | | | | | | | Reflects ceph.git commit 3cef755428761f2481b1dd0e0fbd0464ac483fc5. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: reduce scope of some local variablesIlya Dryomov2013-12-311-3/+3
| | | | | | | | | | | | | | Reflects ceph.git commit e7d47827f0333c96ad43d257607fb92ed4176550. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: factor out (trivial) crush_destroy_rule()Ilya Dryomov2013-12-311-2/+5
| | | | | | | | | | | | | | Reflects ceph.git commit 43a01c9973c4b83f2eaa98be87429941a227ddde. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | crush: pass weight vector size to map functionIlya Dryomov2013-12-312-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the size of the weight vector into crush_do_rule() to ensure that we don't access values past the end. This can happen if the caller misbehaves and passes a weight vector that is smaller than max_devices. Currently the monitor tries to prevent that from happening, but this will gracefully tolerate previous bad osdmaps that got into this state. It's also a bit more defensive. Reflects ceph.git commit 5922e2c2b8335b5e46c9504349c3a55b7434c01a. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: update ceph_features.hIlya Dryomov2013-12-311-1/+3
| | | | | | | | | | | | | | | | | | | | | | This updates ceph_features.h so that it has all feature bits defined in ceph.git. In the interim since the last update, ceph.git crossed the "32 feature bits" point, and, the addition of the 33rd bit wasn't handled correctly. The work-around is squashed into this commit and reflects ceph.git commit 053659d05e0349053ef703b414f44965f368b9f0. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: all features fields must be u64Ilya Dryomov2013-12-312-4/+4
| | | | | | | | | | | | | | | | | | In preparation for ceph_features.h update, change all features fields from unsigned int/u32 to u64. (ceph.git has ~40 feature bits at this point.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* | libceph: resend all writes after the osdmap loses the full flagJosh Durgin2013-12-131-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the current full handling, there is a race between osds and clients getting the first map marked full. If the osd wins, it will return -ENOSPC to any writes, but the client may already have writes in flight. This results in the client getting the error and propagating it up the stack. For rbd, the block layer turns this into EIO, which can cause corruption in filesystems above it. To avoid this race, osds are being changed to drop writes that came from clients with an osdmap older than the last osdmap marked full. In order for this to work, clients must resend all writes after they encounter a full -> not full transition in the osdmap. osds will wait for an updated map instead of processing a request from a client with a newer map, so resent writes will not be dropped by the osd unless there is another not full -> full transition. This approach requires both osds and clients to be fixed to avoid the race. Old clients talking to osds with this fix may hang instead of returning EIO and potentially corrupting an fs. New clients talking to old osds have the same behavior as before if they encounter this race. Fixes: http://tracker.ceph.com/issues/6938 Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
* | libceph: block I/O when PAUSE or FULL osd map flags are setJosh Durgin2013-12-131-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PAUSEWR and PAUSERD flags are meant to stop the cluster from processing writes and reads, respectively. The FULL flag is set when the cluster determines that it is out of space, and will no longer process writes. PAUSEWR and PAUSERD are purely client-side settings already implemented in userspace clients. The osd does nothing special with these flags. When the FULL flag is set, however, the osd responds to all writes with -ENOSPC. For cephfs, this makes sense, but for rbd the block layer translates this into EIO. If a cluster goes from full to non-full quickly, a filesystem on top of rbd will not behave well, since some writes succeed while others get EIO. Fix this by blocking any writes when the FULL flag is set in the osd client. This is the same strategy used by userspace, so apply it by default. A follow-on patch makes this configurable. __map_request() is called to re-target osd requests in case the available osds changed. Add a paused field to a ceph_osd_request, and set it whenever an appropriate osd map flag is set. Avoid queueing paused requests in __map_request(), but force them to be resent if they become unpaused. Also subscribe to the next osd map from the monitor if any of these flags are set, so paused requests can be unblocked as soon as possible. Fixes: http://tracker.ceph.com/issues/6079 Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
* | ceph: Add necessary clean up if invalid reply received in handle_reply()Li Wang2013-12-131-0/+7
|/ | | | | | | | Wake up possible waiters, invoke the call back if any, unregister the request Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com> Signed-off-by: Sage Weil <sage@inktank.com>
* net: 8021q/bluetooth/bridge/can/ceph: Remove extern from function prototypesJoe Perches2013-10-193-27/+25
| | | | | | | | | | | | | There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-09-191-0/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph fixes from Sage Weil: "These fix several bugs with RBD from 3.11 that didn't get tested in time for the merge window: some error handling, a use-after-free, and a sequencing issue when unmapping and image races with a notify operation. There is also a patch fixing a problem with the new ceph + fscache code that just went in" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: fscache: check consistency does not decrement refcount rbd: fix error handling from rbd_snap_name() rbd: ignore unmapped snapshots that no longer exist rbd: fix use-after free of rbd_dev->disk rbd: make rbd_obj_notify_ack() synchronous rbd: complete notifies before cleaning up osd_client and rbd_dev libceph: add function to ensure notifies are complete
| * libceph: add function to ensure notifies are completeJosh Durgin2013-09-091-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without a way to flush the osd client's notify workqueue, a watch event that is unregistered could continue receiving callbacks indefinitely. Unregistering the event simply means no new notifies are added to the queue, but there may still be events in the queue that will call the watch callback for the event. If the queue is flushed after the event is unregistered, the caller can be sure no more watch callbacks will occur for the canceled watch. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2013-09-093-11/+20
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph updates from Sage Weil: "This includes both the first pile of Ceph patches (which I sent to torvalds@vger, sigh) and a few new patches that add support for fscache for Ceph. That includes a few fscache core fixes that David Howells asked go through the Ceph tree. (Thanks go to Milosz Tanski for putting this feature together) This first batch of patches (included here) had (has) several important RBD bug fixes, hole punch support, several different cleanups in the page cache interactions, improvements in the truncate code (new truncate mutex to avoid shenanigans with i_mutex), and a series of fixes in the synchronous striping read/write code. On top of that is a random collection of small fixes all across the tree (error code checks and error path cleanup, obsolete wq flags, etc)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (43 commits) ceph: use d_invalidate() to invalidate aliases ceph: remove ceph_lookup_inode() ceph: trivial buildbot warnings fix ceph: Do not do invalidate if the filesystem is mounted nofsc ceph: page still marked private_2 ceph: ceph_readpage_to_fscache didn't check if marked ceph: clean PgPrivate2 on returning from readpages ceph: use fscache as a local presisent cache fscache: Netfs function for cleanup post readpages FS-Cache: Fix heading in documentation CacheFiles: Implement interface to check cache consistency FS-Cache: Add interface to check consistency of a cached object rbd: fix null dereference in dout rbd: fix buffer size for writes to images with snapshots libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calc rbd: fix I/O error propagation for reads ceph: use vfs __set_page_dirty_nobuffers interface instead of doing it inside filesystem ceph: allow sync_read/write return partial successed size of read/write. ceph: fix bugs about handling short-read for sync read mode. ceph: remove useless variable revoked_rdcache ...
| * libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calcSage Weil2013-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | Fix a typo that used the wrong bitmask for the pg.seed calculation. This is normally unnoticed because in most cases pg_num == pgp_num. It is, however, a bug that is easily corrected. CC: stable@vger.kernel.org Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <alex.elder@linary.org>
| * libceph: create_singlethread_workqueue() doesn't return ERR_PTRsDan Carpenter2013-08-271-4/+2
| | | | | | | | | | | | | | | | | | | | | | create_singlethread_workqueue() returns NULL on error, and it doesn't return ERR_PTRs. I tweaked the error handling a little to be consistent with earlier in the function. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sage Weil <sage@inktank.com>
OpenPOWER on IntegriCloud