summaryrefslogtreecommitdiffstats
path: root/net/bridge
Commit message (Collapse)AuthorAgeFilesLines
* net: Fix disjunct computation of netdev featuresHerbert Xu2008-10-232-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | My change commit e2a6b85247aacc52d6ba0d9b37a99b8d1a3e0d83 net: Enable TSO if supported by at least one device didn't do what was intended because the netdev_compute_features function was designed for conjunctions. So what happened was that it would simply take the TSO status of the last constituent device. This patch extends it to support both conjunctions and disjunctions under the new name of netdev_increment_features. It also adds a new function netdev_fix_features which does the sanity checking that usually occurs upon registration. This ensures that the computation doesn't result in an illegal combination since this checking is absent when the change is initiated via ethtool. The two users of netdev_compute_features have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: replace old NF_ARP calls with NFPROTO_ARPJan Engelhardt2008-10-201-1/+1
| | | | | | | | | | | | (Supplements: ee999d8b9573df1b547aacdc6d79f86eb79c25cd) NFPROTO_ARP actually has a different value from NF_ARP, so ensure all callers use the new value so that packets _do_ get delivered to the registered hooks. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)Johannes Berg2008-10-161-12/+3
| | | | | | | | | | | Some code here depends on CONFIG_KMOD to not try to load protocol modules or similar, replace by CONFIG_MODULES where more than just request_module depends on CONFIG_KMOD and and also use try_then_request_module in ebtables. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: fix ebtables dependenciesPatrick McHardy2008-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | Ingo Molnar reported a build error with ebtables: ERROR: "ebt_register_table" [net/bridge/netfilter/ebtable_filter.ko] undefined! ERROR: "ebt_do_table" [net/bridge/netfilter/ebtable_filter.ko] undefined! ERROR: "ebt_unregister_table" [net/bridge/netfilter/ebtable_filter.ko] undefined! ERROR: "ebt_register_table" [net/bridge/netfilter/ebtable_broute.ko] undefined! ERROR: "ebt_do_table" [net/bridge/netfilter/ebtable_broute.ko] undefined! ERROR: "ebt_unregister_table" [net/bridge/netfilter/ebtable_broute.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 This reason is a missing dependencies that got lost during Kconfig cleanups. Restore it. Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: xtables: provide invoked family value to extensionsJan Engelhardt2008-10-081-3/+8
| | | | | | | | | By passing in the family through which extensions were invoked, a bit of data space can be reclaimed. The "family" member will be added to the parameter structures and the check functions be adjusted. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: xtables: move extension arguments into compound structure (6/6)Jan Engelhardt2008-10-081-6/+13
| | | | | | | This patch does this for target extensions' destroy functions. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: xtables: move extension arguments into compound structure (5/6)Jan Engelhardt2008-10-089-63/+48
| | | | | | | This patch does this for target extensions' checkentry functions. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: xtables: move extension arguments into compound structure (4/6)Jan Engelhardt2008-10-089-54/+43
| | | | | | | This patch does this for target extensions' target functions. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: xtables: move extension arguments into compound structure (3/6)Jan Engelhardt2008-10-081-8/+12
| | | | | | | This patch does this for match extensions' destroy functions. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: xtables: move extension arguments into compound structure (2/6)Jan Engelhardt2008-10-0811-62/+39
| | | | | | | This patch does this for match extensions' checkentry functions. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: xtables: move extension arguments into compound structure (1/6)Jan Engelhardt2008-10-0811-47/+30
| | | | | | | | | | | | | | | | | | The function signatures for Xtables extensions have grown over time. It involves a lot of typing/replication, and also a bit of stack space even if they are not used. Realize an NFWS2008 idea and pack them into structs. The skb remains outside of the struct so gcc can continue to apply its optimizations. This patch does this for match extensions' match functions. A few ambiguities have also been addressed. The "offset" parameter for example has been renamed to "fragoff" (there are so many different offsets already) and "protoff" to "thoff" (there is more than just one protocol here, so clarify). Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: ebtables: make BRIDGE_NF_EBTABLES a menuconfig optionJan Engelhardt2008-10-081-24/+5
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: xtables: do centralized checkentry call (1/2)Jan Engelhardt2008-10-081-18/+6
| | | | | | | | It used to be that {ip,ip6,etc}_tables called extension->checkentry themselves, but this can be moved into the xtables core. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: ebtables: fix one wrong return valueJan Engelhardt2008-10-081-1/+1
| | | | | | | Usually -EINVAL is used when checkentry fails (see *_tables). Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: remove redundant casts from EbtablesJan Engelhardt2008-10-084-6/+6
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: remove unused Ebtables functionsJan Engelhardt2008-10-081-108/+0
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: implement hotdrop for EbtablesJan Engelhardt2008-10-081-3/+10
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: ebtables: use generic table checkingJan Engelhardt2008-10-084-6/+8
| | | | | | | | | Ebtables ORs (1 << NF_BR_NUMHOOKS) into the hook mask to indicate that the extension was called from a base chain. So this also needs to be present in the extensions' ->hooks. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: move Ebtables to use XtablesJan Engelhardt2008-10-0820-188/+148
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: change Ebtables function signatures to match Xtables'sJan Engelhardt2008-10-0819-156/+198
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: ebt_among: obtain match size through different meansJan Engelhardt2008-10-081-2/+4
| | | | | | | | | The function signatures will be changed to match those of Xtables, and the datalen argument will be gone. ebt_among unfortunately relies on it, so we need to obtain it somehow. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: add dummy members to Ebtables code to ease transition to XtablesJan Engelhardt2008-10-0819-9/+85
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: Change return types of targets/watchers for Ebtables extensionsJan Engelhardt2008-10-088-12/+16
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: change return types of match functions for ebtables extensionsJan Engelhardt2008-10-0810-103/+103
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: change return types of check functions for Ebtables extensionsJan Engelhardt2008-10-0819-102/+106
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: ebtables: do centralized size checkingJan Engelhardt2008-10-0819-88/+101
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: x_tables: use NFPROTO_* in extensionsJan Engelhardt2008-10-082-4/+4
| | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* netfilter: Use unsigned types for hooknum and pf varsJan Engelhardt2008-10-083-4/+4
| | | | | | | and (try to) consistently use u_int8_t for the L3 family. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
* Merge branch 'master' of ↵David S. Miller2008-09-082-9/+25
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: net/mac80211/mlme.c
| * bridge: don't allow setting hello time to zeroStephen Hemminger2008-09-082-9/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dushan Tcholich reports that on his system ksoftirqd can consume between %6 to %10 of cpu time, and cause ~200 context switches per second. He then correlated this with a report by bdupree@techfinesse.com: http://marc.info/?l=linux-kernel&m=119613299024398&w=2 and the culprit cause seems to be starting the bridge interface. In particular, when starting the bridge interface, his scripts are specifying a hello timer interval of "0". The bridge hello time can't be safely set to values less than 1 second, otherwise it is possible to end up with a runaway timer. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netns bridge: cleanup bridges during netns stopAlexey Dobriyan2008-09-083-9/+19
| | | | | | | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemming@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netns bridge: allow bridges in netns!Alexey Dobriyan2008-09-087-34/+25
|/ | | | | | | | | | | | | | Bridge as netdevice doesn't cross netns boundaries. Bridge ports and bridge itself live in same netns. Notifiers are fixed. netns propagated from userspace socket for setup and teardown. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemming@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: show offload settingsStephen Hemminger2008-08-151-5/+10
| | | | | | | | Add more ethtool generic operations to dump the bridge offload settings. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Eliminate unnecessary forward delayStephen Hemminger2008-08-051-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Stephen Hemminger <shemminger@vyatta.com> Based upon original patch by Herbert Xu, which contained the following problem description: -------------------- When the forward delay is set to zero, we still delay the setting of the forwarding state by one or possibly two timers depending on whether STP is enabled. This could either turn out to be instantaneous, or horribly slow depending on the load of the machine. As there is nothing preventing us from enabling forwarding straight away, this patch eliminates this potential delay by executing the code directly if the forward delay is zero. The effect of this problem is that immediately after the carrier comes on a port, the bridge will drop all packets received from that port until it enters forwarding mode, thus causing unnecessary packet loss. Note that this patch doesn't fully remove the delay due to the link watcher. We should also check the carrier state when we are about to drop an incoming packet because the port is disabled. But that's for another patch. -------------------- This version of the fix takes a different approach, in that it just does the state change directly. Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: fix compile warning in net/bridge/br_netfilter.cRami Rosen2008-08-051-1/+1
| | | | | | | | | | | | | | | This patch fixes the following warning due to incompatible pointer assignment: net/bridge/br_netfilter.c: In function 'br_netfilter_rtable_init': net/bridge/br_netfilter.c:116: warning: assignment from incompatible pointer type This warning is due to commit 4adf0af6818f3ea52421dc0bae836cfaf20ef72a from July 30 (send correct MTU value in PMTU (revised)). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: send correct MTU value in PMTU (revised)Simon Wunderlich2008-07-304-30/+51
| | | | | | | | | | | | | | | | | | | | | When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: ebtables: use nf_register_hooks()Alexey Dobriyan2008-07-262-26/+10
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netns: Use net_eq() to compare net-namespaces for optimization.YOSHIFUJI Hideaki2008-07-192-2/+2
| | | | | | | | Without CONFIG_NET_NS, namespace is always &init_net. Compiler will be able to omit namespace comparisons with this patch. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-07-182-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/powerpc/booting-without-of.txt drivers/atm/Makefile drivers/net/fs_enet/fs_enet-main.c drivers/pci/pci-acpi.c net/8021q/vlan.c net/iucv/iucv.c
| * Merge branch 'linus' into core/rcuIngo Molnar2008-07-111-3/+7
| |\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: include/linux/rculist.h kernel/rcupreempt.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | rcu: split list.h and move rcu-protected lists into rculist.hFranck Bui-Huu2008-05-192-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move rcu-protected lists from list.h into a new header file rculist.h. This is done because list are a very used primitive structure all over the kernel and it's currently impossible to include other header files in this list.h without creating some circular dependencies. For example, list.h implements rcu-protected list and uses rcu_dereference() without including rcupdate.h. It actually compiles because users of rcu_dereference() are macros. Others RCU functions could be used too but aren't probably because of this. Therefore this patch creates rculist.h which includes rcupdates without to many changes/troubles. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Josh Triplett <josh@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | bridge: Check return of dev_set_promiscuityWang Chen2008-07-141-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. Here, we check the positive increment for promiscuity to get error return. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | netfilter: ebt_nflog: fix Kconfig typoPatrick McHardy2008-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The help text should refer to nflog instead of ulog. Noticed by Krzysztof Halasa <khc@pm.waw.pl>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'master' of ↵David S. Miller2008-07-051-3/+7
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wan/hdlc_fr.c drivers/net/wireless/iwlwifi/iwl-4965.c drivers/net/wireless/iwlwifi/iwl3945-base.c
| * | bridge: fix use-after-free in br_cleanup_bridges()Patrick McHardy2008-07-031-3/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unregistering a bridge device may cause virtual devices stacked on the bridge, like vlan or macvlan devices, to be unregistered as well. br_cleanup_bridges() uses for_each_netdev_safe() to iterate over all devices during cleanup. This is not enough however, if one of the additionally unregistered devices is next in the list to the bridge device, it will get freed as well and the iteration continues on the freed element. Restart iteration after each bridge device removal from the beginning to fix this, similar to what rtnl_link_unregister() does. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bridge: Use STP demuxPatrick McHardy2008-07-054-18/+16
| | | | | | | | | | | | | | | | Use the STP demux layer for receiving STP PDUs instead of directly registering with LLC. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Discard and warn about LRO'd skbs received for forwardingBen Hutchings2008-06-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | Add skb_warn_if_lro() to test whether an skb was received with LRO and warn if so. Change br_forward(), ip_forward() and ip6_forward() to call it) and discard the skb if it returns true. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Disable LRO on devices that are forwardingBen Hutchings2008-06-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Large Receive Offload (LRO) is only appropriate for packets that are destined for the host, and should be disabled if received packets may be forwarded. It can also confuse the GSO on output. Add dev_disable_lro() function which uses the appropriate ethtool ops to disable LRO if enabled. Add calls to dev_disable_lro() in br_add_if() and functions that enable IPv4 and IPv6 forwarding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bridge: fix IPV6=n buildRandy Dunlap2008-06-173-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix bridge netfilter code so that it uses CONFIG_IPV6 as needed: net/built-in.o: In function `ebt_filter_ip6': ebt_ip6.c:(.text+0x87c37): undefined reference to `ipv6_skip_exthdr' net/built-in.o: In function `ebt_log_packet': ebt_log.c:(.text+0x88dee): undefined reference to `ipv6_skip_exthdr' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bridge: make bridge address settings stickyStephen Hemminger2008-06-173-0/+7
| | | | | | | | | | | | | | | | | | Normally, the bridge just chooses the smallest mac address as the bridge id and mac address of bridge device. But if the administrator has explictly set the interface address then don't change it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud