summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_conn.c
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: Double check sec req for pre 2.1 deviceWaldemar Rymarkiewicz2011-05-111-0/+17
| | | | | | | | | | | | | | | | In case of pre v2.1 devices authentication request will return success immediately if the link key already exists without any authentication process. That means, it's not possible to re-authenticate the link if you already have combination key and for instance want to re-authenticate to get the high security (use 16 digit pin). Therefore, it's necessary to check security requirements on auth complete event to prevent not enough secure connection. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Add variable SSP auto-accept delay supportJohan Hedberg2011-04-281-0/+17
| | | | | | | | | | | Some test systems require an arbitrary delay to the auto-accept test cases for Secure Simple Pairing in order for the tests to pass. Previously when this was handled in user space it was worked around by code modifications and recompilation, but now that it's on the kernel side it's more convenient if there's a debugfs interface for it. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Map sec_level to link key requirementsWaldemar Rymarkiewicz2011-04-281-10/+51
| | | | | | | | | Keep the link key type together with connection and use it to map security level to link key requirements. Authenticate and/or encrypt connection if the link is insufficiently secure. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Use ERR_PTR as return error from hci_connectVille Tervo2011-02-271-2/+2
| | | | | | | | Use ERR_PTR mechanism to return error from hci_connect. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Fix LE conn creationAnderson Briglia2011-02-211-2/+3
| | | | | | | | | | This patch prevents a crash when remote host tries to create a LE link which already exists. i.e.: call l2test twice passing the same parameters. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Fix inititial value for remote authentication requirementsJohan Hedberg2011-02-211-0/+1
| | | | | | | | | | The remote authentication requirements for conections need to be initialized to 0xff (unknown) since it is possible that we receive a IO Capability Request before we have received information about the remote requirements. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Send LE Connection Update CommandClaudio Takahasi2011-02-161-0/+20
| | | | | | | | | If the new connection update parameter are accepted, the LE master host sends the LE Connection Update Command to its controller informing the new requested parameters. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Fix initiated LE connectionsVinicius Costa Gomes2011-02-161-0/+1
| | | | | | | | Fix LE connections not being marked as master. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Use LE buffers for LE trafficVille Tervo2011-02-161-0/+5
| | | | | | | | | Bluetooth chips may have separate buffers for LE traffic. This patch add support to use LE buffers provided by the chip. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Add LE connect supportVille Tervo2011-02-161-3/+48
| | | | | | | | | | | Bluetooth V4.0 adds support for Low Energy (LE) connections. Specification introduces new set of hci commands to control LE connection. This patch adds logic to create, cancel and disconnect LE connections. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Add set_io_capability management commandJohan Hedberg2011-02-081-0/+1
| | | | | | | | | | This patch adds a new set_io_capability management command which is used to set the IO capability for Secure Simple Pairing (SSP) as well as the Security Manager Protocol (SMP). The value is per hci_dev and each hci_conn object inherits it upon creation. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Fix race condition with conn->sec_levelJohan Hedberg2011-01-191-2/+6
| | | | | | | | | | | | The conn->sec_level value is supposed to represent the current level of security that the connection has. However, by assigning to it before requesting authentication it will have the wrong value during the authentication procedure. To fix this a pending_sec_level variable is added which is used to track the desired security level while making sure that sec_level always represents the current level of security. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Fix MITM protection requirement preservationJohan Hedberg2011-01-191-0/+3
| | | | | | | | | | If an existing connection has a MITM protection requirement (the first bit of the auth_type) then that requirement should not be cleared by new sockets that reuse the ACL but don't have that requirement. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Revert "Bluetooth: Update sec_level/auth_type for already existing connections"Johan Hedberg2011-01-191-5/+0
| | | | | | | | | | | | | | | | | | | This reverts commit 045309820afe047920a50de25634dab46a1e851d. That commit is wrong for two reasons: - The conn->sec_level shouldn't be updated without performing authentication first (as it's supposed to represent the level of security that the existing connection has) - A higher auth_type value doesn't mean "more secure" like the commit seems to assume. E.g. dedicated bonding with MITM protection is 0x03 whereas general bonding without MITM protection is 0x04. hci_conn_auth already takes care of updating conn->auth_type so hci_connect doesn't need to do it. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: clean up hci codeAndrei Emeltchenko2010-12-011-8/+15
| | | | | | | | Do not use assignment in IF condition, remove extra spaces, fixing typos, simplify code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: Defer SCO setup if mode change is pendingMarcel Holtmann2010-07-271-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Certain headsets such as the Motorola H350 will reject SCO and eSCO connection requests while the ACL is transitioning from sniff mode to active mode. Add synchronization so that SCO and eSCO connection requests will wait until the ACL has fully transitioned to active mode. < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 12 voice setting 0x0040 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 1 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x10 handle 14 bdaddr 00:1A:0E:50:28:A4 type SCO Error: Connection Accept Timeout Exceeded Signed-off-by: Ron Shaffer <rshaffer@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Reassigned copyright to Code Aurora ForumRon Shaffer2010-07-211-1/+1
| | | | | | | | | Qualcomm, Inc. has reassigned rights to Code Aurora Forum. Accordingly, as files are modified by Code Aurora Forum members, the copyright statement will be updated. Signed-off-by: Ron Shaffer <rshaffer@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Update sec_level/auth_type for already existing connectionsVille Tervo2010-07-081-0/+5
| | | | | | | | | | | Update auth level for already existing connections if it is lower than required by new connection. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Reviewed-by: Emeltchenko Andrei <andrei.emeltchenko@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Enter active mode before establishing a SCO link.Nick Pelly2010-02-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | When in sniff mode with a long interval time (1.28s) it can take 4+ seconds to establish a SCO link. Fix by requesting active mode before requesting SCO connection. This improves SCO setup time to ~500ms. Bluetooth headsets that use a long interval time, and exhibit the long SCO connection time include Motorola H790, HX1 and H17. They have a CSR 2.1 chipset. Verified this behavior and fix with host Bluetooth chipsets: BCM4329 and TI1271. 2009-10-13 14:17:46.183722 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 1 mode 0x02 interval 2048 Mode: Sniff 2009-10-13 14:17:53.436285 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 1 voice setting 0x0060 2009-10-13 14:17:53.445593 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2009-10-13 14:17:57.788855 > HCI Event: Synchronous Connect Complete 0x2c) plen 17 status 0x00 handle 257 bdaddr 00:1A:0E:F1:A4:7F type eSCO Air mode: CVSD Signed-off-by: Nick Pelly <npelly@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Set general bonding security for ACL by defaultAndrei Emeltchenko2009-11-161-0/+1
| | | | | | | | | | | | | | | | | | This patch fixes double pairing issues with Secure Simple Paring support. It was observed that when pairing with SSP enabled, that the confirmation will be asked twice. http://www.spinics.net/lists/linux-bluetooth/msg02473.html This also causes bug when initiating SSP connection from Windows Vista. The reason is because bluetoothd does not store link keys since HCIGETAUTHINFO returns 0. Setting default to general bonding fixes these issues. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add extra device reference counting for connectionsMarcel Holtmann2009-08-221-1/+16
| | | | | | | | | | | | | | | | | | | | The device model itself has no real usable reference counting at the moment and this causes problems if parents are deleted before their children. The device model itself handles the memory details of this correctly, but the uevent order is not consistent. This causes various problems for systems like HAL or even X. So until device_put() does a proper cleanup, the device for Bluetooth connection will be protected with an extra reference counting to ensure the correct order of uevents when connections are terminated. This is not an automatic feature. Higher Bluetooth layers like HIDP or BNEP should grab this new reference to ensure that their uevents are send before the ones from the parent device. Based on a report by Brian Rogers <brian@xyzw.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Don't use hci_acl_connect_cancel() for incoming connectionsMarcel Holtmann2009-05-091-3/+1
| | | | | | | | | | | | | | | | | | | | | | The connection setup phase takes around 2 seconds or longer and in that time it is possible that the need for an ACL connection is no longer present. If that happens then, the connection attempt will be canceled. This only applies to outgoing connections, but currently it can also be triggered by incoming connection. Don't call hci_acl_connect_cancel() on incoming connection since these have to be either accepted or rejected in this state. Once they are successfully connected they need to be fully disconnected anyway. Also remove the wrong hci_acl_disconn() call for SCO and eSCO links since at this stage they can't be disconnected either, because the connection handle is still unknown. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Johan Hedberg <johan.hedberg@nokia.com>
* Bluetooth: Fix wrong module refcount when connection setup failsMarcel Holtmann2009-05-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The module refcount is increased by hci_dev_hold() call in hci_conn_add() and decreased by hci_dev_put() call in del_conn(). In case the connection setup fails, hci_dev_put() is never called. Procedure to reproduce the issue: # hciconfig hci0 up # lsmod | grep btusb -> "used by" refcount = 1 # hcitool cc <non-exisiting bdaddr> -> will get timeout # lsmod | grep btusb -> "used by" refcount = 2 # hciconfig hci0 down # lsmod | grep btusb -> "used by" refcount = 1 # rmmod btusb -> ERROR: Module btusb is in use The hci_dev_put() call got moved into del_conn() with the 2.6.25 kernel to fix an issue with hci_dev going away before hci_conn. However that change was wrong and introduced this problem. When calling hci_conn_del() it has to call hci_dev_put() after freeing the connection details. This handling should be fully symmetric. The execution of del_conn() is done in a work queue and needs it own calls to hci_dev_hold() and hci_dev_put() to ensure that the hci_dev stays until the connection cleanup has been finished. Based on a report by Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Bing Zhao <bzhao@marvell.com>
* Bluetooth: Fix issue with sysfs handling for connectionsMarcel Holtmann2009-05-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to a semantic changes in flush_workqueue() the current approach of synchronizing the sysfs handling for connections doesn't work anymore. The whole approach is actually fully broken and based on assumptions that are no longer valid. With the introduction of Simple Pairing support, the creation of low-level ACL links got changed. This change invalidates the reason why in the past two independent work queues have been used for adding/removing sysfs devices. The adding of the actual sysfs device is now postponed until the host controller successfully assigns an unique handle to that link. So the real synchronization happens inside the controller and not the host. The only left-over problem is that some internals of the sysfs device handling are not initialized ahead of time. This leaves potential access to invalid data and can cause various NULL pointer dereferences. To fix this a new function makes sure that all sysfs details are initialized when an connection attempt is made. The actual sysfs device is only registered when the connection has been successfully established. To avoid a race condition with the registration, the check if a device is registered has been moved into the removal work. As an extra protection two flush_work() calls are left in place to make sure a previous add/del work has been completed first. Based on a report by Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Roger Quadros <ext-roger.quadros@nokia.com> Tested-by: Marc Pignat <marc.pignat@hevs.ch>
* Bluetooth: Fix connection establishment with low security requirementMarcel Holtmann2009-04-281-6/+3
| | | | | | | | | | | | | | | | | | | | | | The Bluetooth 2.1 specification introduced four different security modes that can be mapped using Legacy Pairing and Simple Pairing. With the usage of Simple Pairing it is required that all connections (except the ones for SDP) are encrypted. So even the low security requirement mandates an encrypted connection when using Simple Pairing. When using Legacy Pairing (for Bluetooth 2.0 devices and older) this is not required since it causes interoperability issues. To support this properly the low security requirement translates into different host controller transactions depending if Simple Pairing is supported or not. However in case of Simple Pairing the command to switch on encryption after a successful authentication is not triggered for the low security mode. This patch fixes this and actually makes the logic to differentiate between Simple Pairing and Legacy Pairing a lot simpler. Based on a report by Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add different pairing timeout for Legacy PairingMarcel Holtmann2009-04-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Move hci_conn_del_sysfs() back to avoid device destruct too earlyDave Young2009-02-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit introduce a regression: commit 7d0db0a373195385a2e0b19d1f5e4b186fdcffac Author: Marcel Holtmann <marcel@holtmann.org> Date: Mon Jul 14 20:13:51 2008 +0200 [Bluetooth] Use a more unique bus name for connections I get panic as following (by netconsole): [ 2709.344034] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 2709.505776] usb 5-1: configuration #1 chosen from 1 choice [ 2709.569207] Bluetooth: Generic Bluetooth USB driver ver 0.4 [ 2709.570169] usbcore: registered new interface driver btusb [ 2845.742781] BUG: unable to handle kernel paging request at 6b6b6c2f [ 2845.742958] IP: [<c015515c>] __lock_acquire+0x6c/0xa80 [ 2845.743087] *pde = 00000000 [ 2845.743206] Oops: 0002 [#1] SMP [ 2845.743377] last sysfs file: /sys/class/bluetooth/hci0/hci0:6/type [ 2845.743742] Modules linked in: btusb netconsole snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss rfcomm l2cap bluetooth vfat fuse snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm pl2303 snd_timer psmouse usbserial snd 3c59x e100 serio_raw soundcore i2c_i801 intel_agp mii agpgart snd_page_alloc rtc_cmos rtc_core thermal processor rtc_lib button thermal_sys sg evdev [ 2845.743742] [ 2845.743742] Pid: 0, comm: swapper Not tainted (2.6.29-rc5-smp #54) Dell DM051 [ 2845.743742] EIP: 0060:[<c015515c>] EFLAGS: 00010002 CPU: 0 [ 2845.743742] EIP is at __lock_acquire+0x6c/0xa80 [ 2845.743742] EAX: 00000046 EBX: 00000046 ECX: 6b6b6b6b EDX: 00000002 [ 2845.743742] ESI: 6b6b6b6b EDI: 00000000 EBP: c064fd14 ESP: c064fcc8 [ 2845.743742] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 2845.743742] Process swapper (pid: 0, ti=c064e000 task=c05d1400 task.ti=c064e000) [ 2845.743742] Stack: [ 2845.743742] c05d1400 00000002 c05d1400 00000001 00000002 00000000 f65388dc c05d1400 [ 2845.743742] 6b6b6b6b 00000292 c064fd0c c0153732 00000000 00000000 00000001 f700fa50 [ 2845.743742] 00000046 00000000 00000000 c064fd40 c0155be6 00000000 00000002 00000001 [ 2845.743742] Call Trace: [ 2845.743742] [<c0153732>] ? trace_hardirqs_on_caller+0x72/0x1c0 [ 2845.743742] [<c0155be6>] ? lock_acquire+0x76/0xa0 [ 2845.743742] [<c03e1aad>] ? skb_dequeue+0x1d/0x70 [ 2845.743742] [<c046c885>] ? _spin_lock_irqsave+0x45/0x80 [ 2845.743742] [<c03e1aad>] ? skb_dequeue+0x1d/0x70 [ 2845.743742] [<c03e1aad>] ? skb_dequeue+0x1d/0x70 [ 2845.743742] [<c03e1f94>] ? skb_queue_purge+0x14/0x20 [ 2845.743742] [<f8171f5a>] ? hci_conn_del+0x10a/0x1c0 [bluetooth] [ 2845.743742] [<f81399c9>] ? l2cap_disconn_ind+0x59/0xb0 [l2cap] [ 2845.743742] [<f81795ce>] ? hci_conn_del_sysfs+0x8e/0xd0 [bluetooth] [ 2845.743742] [<f8175758>] ? hci_event_packet+0x5f8/0x31c0 [bluetooth] [ 2845.743742] [<c03dfe19>] ? sock_def_readable+0x59/0x80 [ 2845.743742] [<c046c14d>] ? _read_unlock+0x1d/0x20 [ 2845.743742] [<f8178aa9>] ? hci_send_to_sock+0xe9/0x1d0 [bluetooth] [ 2845.743742] [<c015388b>] ? trace_hardirqs_on+0xb/0x10 [ 2845.743742] [<f816fa6a>] ? hci_rx_task+0x2ba/0x490 [bluetooth] [ 2845.743742] [<c0133661>] ? tasklet_action+0x31/0xc0 [ 2845.743742] [<c013367c>] ? tasklet_action+0x4c/0xc0 [ 2845.743742] [<c0132eb7>] ? __do_softirq+0xa7/0x170 [ 2845.743742] [<c0116dec>] ? ack_apic_level+0x5c/0x1c0 [ 2845.743742] [<c0132fd7>] ? do_softirq+0x57/0x60 [ 2845.743742] [<c01333dc>] ? irq_exit+0x7c/0x90 [ 2845.743742] [<c01055bb>] ? do_IRQ+0x4b/0x90 [ 2845.743742] [<c01333d5>] ? irq_exit+0x75/0x90 [ 2845.743742] [<c010392c>] ? common_interrupt+0x2c/0x34 [ 2845.743742] [<c010a14f>] ? mwait_idle+0x4f/0x70 [ 2845.743742] [<c0101c05>] ? cpu_idle+0x65/0xb0 [ 2845.743742] [<c045731e>] ? rest_init+0x4e/0x60 [ 2845.743742] Code: 0f 84 69 02 00 00 83 ff 07 0f 87 1e 06 00 00 85 ff 0f 85 08 05 00 00 8b 4d cc 8b 49 04 85 c9 89 4d d4 0f 84 f7 04 00 00 8b 75 d4 <f0> ff 86 c4 00 00 00 89 f0 e8 56 a9 ff ff 85 c0 0f 85 6e 03 00 [ 2845.743742] EIP: [<c015515c>] __lock_acquire+0x6c/0xa80 SS:ESP 0068:c064fcc8 [ 2845.743742] ---[ end trace 4c985b38f022279f ]--- [ 2845.743742] Kernel panic - not syncing: Fatal exception in interrupt [ 2845.743742] ------------[ cut here ]------------ [ 2845.743742] WARNING: at kernel/smp.c:329 smp_call_function_many+0x151/0x200() [ 2845.743742] Hardware name: Dell DM051 [ 2845.743742] Modules linked in: btusb netconsole snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss rfcomm l2cap bluetooth vfat fuse snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm pl2303 snd_timer psmouse usbserial snd 3c59x e100 serio_raw soundcore i2c_i801 intel_agp mii agpgart snd_page_alloc rtc_cmos rtc_core thermal processor rtc_lib button thermal_sys sg evdev [ 2845.743742] Pid: 0, comm: swapper Tainted: G D 2.6.29-rc5-smp #54 [ 2845.743742] Call Trace: [ 2845.743742] [<c012e076>] warn_slowpath+0x86/0xa0 [ 2845.743742] [<c015041b>] ? trace_hardirqs_off+0xb/0x10 [ 2845.743742] [<c0146384>] ? up+0x14/0x40 [ 2845.743742] [<c012e661>] ? release_console_sem+0x31/0x1e0 [ 2845.743742] [<c046c8ab>] ? _spin_lock_irqsave+0x6b/0x80 [ 2845.743742] [<c015041b>] ? trace_hardirqs_off+0xb/0x10 [ 2845.743742] [<c046c900>] ? _read_lock_irqsave+0x40/0x80 [ 2845.743742] [<c012e7f2>] ? release_console_sem+0x1c2/0x1e0 [ 2845.743742] [<c0146384>] ? up+0x14/0x40 [ 2845.743742] [<c015041b>] ? trace_hardirqs_off+0xb/0x10 [ 2845.743742] [<c046a3d7>] ? __mutex_unlock_slowpath+0x97/0x160 [ 2845.743742] [<c046a563>] ? mutex_trylock+0xb3/0x180 [ 2845.743742] [<c046a4a8>] ? mutex_unlock+0x8/0x10 [ 2845.743742] [<c015b991>] smp_call_function_many+0x151/0x200 [ 2845.743742] [<c010a1a0>] ? stop_this_cpu+0x0/0x40 [ 2845.743742] [<c015ba61>] smp_call_function+0x21/0x30 [ 2845.743742] [<c01137ae>] native_smp_send_stop+0x1e/0x50 [ 2845.743742] [<c012e0f5>] panic+0x55/0x110 [ 2845.743742] [<c01065a8>] oops_end+0xb8/0xc0 [ 2845.743742] [<c010668f>] die+0x4f/0x70 [ 2845.743742] [<c011a8c9>] do_page_fault+0x269/0x610 [ 2845.743742] [<c011a660>] ? do_page_fault+0x0/0x610 [ 2845.743742] [<c046cbaf>] error_code+0x77/0x7c [ 2845.743742] [<c015515c>] ? __lock_acquire+0x6c/0xa80 [ 2845.743742] [<c0153732>] ? trace_hardirqs_on_caller+0x72/0x1c0 [ 2845.743742] [<c0155be6>] lock_acquire+0x76/0xa0 [ 2845.743742] [<c03e1aad>] ? skb_dequeue+0x1d/0x70 [ 2845.743742] [<c046c885>] _spin_lock_irqsave+0x45/0x80 [ 2845.743742] [<c03e1aad>] ? skb_dequeue+0x1d/0x70 [ 2845.743742] [<c03e1aad>] skb_dequeue+0x1d/0x70 [ 2845.743742] [<c03e1f94>] skb_queue_purge+0x14/0x20 [ 2845.743742] [<f8171f5a>] hci_conn_del+0x10a/0x1c0 [bluetooth] [ 2845.743742] [<f81399c9>] ? l2cap_disconn_ind+0x59/0xb0 [l2cap] [ 2845.743742] [<f81795ce>] ? hci_conn_del_sysfs+0x8e/0xd0 [bluetooth] [ 2845.743742] [<f8175758>] hci_event_packet+0x5f8/0x31c0 [bluetooth] [ 2845.743742] [<c03dfe19>] ? sock_def_readable+0x59/0x80 [ 2845.743742] [<c046c14d>] ? _read_unlock+0x1d/0x20 [ 2845.743742] [<f8178aa9>] ? hci_send_to_sock+0xe9/0x1d0 [bluetooth] [ 2845.743742] [<c015388b>] ? trace_hardirqs_on+0xb/0x10 [ 2845.743742] [<f816fa6a>] hci_rx_task+0x2ba/0x490 [bluetooth] [ 2845.743742] [<c0133661>] ? tasklet_action+0x31/0xc0 [ 2845.743742] [<c013367c>] tasklet_action+0x4c/0xc0 [ 2845.743742] [<c0132eb7>] __do_softirq+0xa7/0x170 [ 2845.743742] [<c0116dec>] ? ack_apic_level+0x5c/0x1c0 [ 2845.743742] [<c0132fd7>] do_softirq+0x57/0x60 [ 2845.743742] [<c01333dc>] irq_exit+0x7c/0x90 [ 2845.743742] [<c01055bb>] do_IRQ+0x4b/0x90 [ 2845.743742] [<c01333d5>] ? irq_exit+0x75/0x90 [ 2845.743742] [<c010392c>] common_interrupt+0x2c/0x34 [ 2845.743742] [<c010a14f>] ? mwait_idle+0x4f/0x70 [ 2845.743742] [<c0101c05>] cpu_idle+0x65/0xb0 [ 2845.743742] [<c045731e>] rest_init+0x4e/0x60 [ 2845.743742] ---[ end trace 4c985b38f02227a0 ]--- [ 2845.743742] ------------[ cut here ]------------ [ 2845.743742] WARNING: at kernel/smp.c:226 smp_call_function_single+0x8e/0x110() [ 2845.743742] Hardware name: Dell DM051 [ 2845.743742] Modules linked in: btusb netconsole snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss rfcomm l2cap bluetooth vfat fuse snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm pl2303 snd_timer psmouse usbserial snd 3c59x e100 serio_raw soundcore i2c_i801 intel_agp mii agpgart snd_page_alloc rtc_cmos rtc_core thermal processor rtc_lib button thermal_sys sg evdev [ 2845.743742] Pid: 0, comm: swapper Tainted: G D W 2.6.29-rc5-smp #54 [ 2845.743742] Call Trace: [ 2845.743742] [<c012e076>] warn_slowpath+0x86/0xa0 [ 2845.743742] [<c012e000>] ? warn_slowpath+0x10/0xa0 [ 2845.743742] [<c015041b>] ? trace_hardirqs_off+0xb/0x10 [ 2845.743742] [<c0146384>] ? up+0x14/0x40 [ 2845.743742] [<c012e661>] ? release_console_sem+0x31/0x1e0 [ 2845.743742] [<c046c8ab>] ? _spin_lock_irqsave+0x6b/0x80 [ 2845.743742] [<c015041b>] ? trace_hardirqs_off+0xb/0x10 [ 2845.743742] [<c046c900>] ? _read_lock_irqsave+0x40/0x80 [ 2845.743742] [<c012e7f2>] ? release_console_sem+0x1c2/0x1e0 [ 2845.743742] [<c0146384>] ? up+0x14/0x40 [ 2845.743742] [<c015b7be>] smp_call_function_single+0x8e/0x110 [ 2845.743742] [<c010a1a0>] ? stop_this_cpu+0x0/0x40 [ 2845.743742] [<c026d23f>] ? cpumask_next_and+0x1f/0x40 [ 2845.743742] [<c015b95a>] smp_call_function_many+0x11a/0x200 [ 2845.743742] [<c010a1a0>] ? stop_this_cpu+0x0/0x40 [ 2845.743742] [<c015ba61>] smp_call_function+0x21/0x30 [ 2845.743742] [<c01137ae>] native_smp_send_stop+0x1e/0x50 [ 2845.743742] [<c012e0f5>] panic+0x55/0x110 [ 2845.743742] [<c01065a8>] oops_end+0xb8/0xc0 [ 2845.743742] [<c010668f>] die+0x4f/0x70 [ 2845.743742] [<c011a8c9>] do_page_fault+0x269/0x610 [ 2845.743742] [<c011a660>] ? do_page_fault+0x0/0x610 [ 2845.743742] [<c046cbaf>] error_code+0x77/0x7c [ 2845.743742] [<c015515c>] ? __lock_acquire+0x6c/0xa80 [ 2845.743742] [<c0153732>] ? trace_hardirqs_on_caller+0x72/0x1c0 [ 2845.743742] [<c0155be6>] lock_acquire+0x76/0xa0 [ 2845.743742] [<c03e1aad>] ? skb_dequeue+0x1d/0x70 [ 2845.743742] [<c046c885>] _spin_lock_irqsave+0x45/0x80 [ 2845.743742] [<c03e1aad>] ? skb_dequeue+0x1d/0x70 [ 2845.743742] [<c03e1aad>] skb_dequeue+0x1d/0x70 [ 2845.743742] [<c03e1f94>] skb_queue_purge+0x14/0x20 [ 2845.743742] [<f8171f5a>] hci_conn_del+0x10a/0x1c0 [bluetooth] [ 2845.743742] [<f81399c9>] ? l2cap_disconn_ind+0x59/0xb0 [l2cap] [ 2845.743742] [<f81795ce>] ? hci_conn_del_sysfs+0x8e/0xd0 [bluetooth] [ 2845.743742] [<f8175758>] hci_event_packet+0x5f8/0x31c0 [bluetooth] [ 2845.743742] [<c03dfe19>] ? sock_def_readable+0x59/0x80 [ 2845.743742] [<c046c14d>] ? _read_unlock+0x1d/0x20 [ 2845.743742] [<f8178aa9>] ? hci_send_to_sock+0xe9/0x1d0 [bluetooth] [ 2845.743742] [<c015388b>] ? trace_hardirqs_on+0xb/0x10 [ 2845.743742] [<f816fa6a>] hci_rx_task+0x2ba/0x490 [bluetooth] [ 2845.743742] [<c0133661>] ? tasklet_action+0x31/0xc0 [ 2845.743742] [<c013367c>] tasklet_action+0x4c/0xc0 [ 2845.743742] [<c0132eb7>] __do_softirq+0xa7/0x170 [ 2845.743742] [<c0116dec>] ? ack_apic_level+0x5c/0x1c0 [ 2845.743742] [<c0132fd7>] do_softirq+0x57/0x60 [ 2845.743742] [<c01333dc>] irq_exit+0x7c/0x90 [ 2845.743742] [<c01055bb>] do_IRQ+0x4b/0x90 [ 2845.743742] [<c01333d5>] ? irq_exit+0x75/0x90 [ 2845.743742] [<c010392c>] common_interrupt+0x2c/0x34 [ 2845.743742] [<c010a14f>] ? mwait_idle+0x4f/0x70 [ 2845.743742] [<c0101c05>] cpu_idle+0x65/0xb0 [ 2845.743742] [<c045731e>] rest_init+0x4e/0x60 [ 2845.743742] ---[ end trace 4c985b38f02227a1 ]--- [ 2845.743742] Rebooting in 3 seconds.. My logitec bluetooth mouse trying connect to pc, but pc side reject the connection again and again. then panic happens. The reason is due to hci_conn_del_sysfs now called in hci_event_packet, the del work is done in a workqueue, so it's possible done before skb_queue_purge called. I move the hci_conn_del_sysfs after skb_queue_purge just as that before marcel's commit. Remove the hci_conn_del_sysfs in hci_conn_hash_flush as well due to hci_conn_del will deal with the work. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Set authentication requirement before requesting itMarcel Holtmann2009-02-271-6/+4
| | | | | | | | | | The authentication requirement got only updated when the security level increased. This is a wrong behavior. The authentication requirement is read by the Bluetooth daemon to make proper decisions when handling the IO capabilities exchange. So set the value that is currently expected by the higher layers like L2CAP and RFCOMM. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Ask upper layers for HCI disconnect reasonMarcel Holtmann2009-02-271-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the qualification tests demand that in case of failures in L2CAP the HCI disconnect should indicate a reason why L2CAP fails. This is a bluntly layer violation since multiple L2CAP connections could be using the same ACL and thus forcing a disconnect reason is not a good idea. To comply with the Bluetooth test specification, the disconnect reason is now stored in the L2CAP connection structure and every time a new L2CAP channel is added it will set back to its default. So only in the case where the L2CAP channel with the disconnect reason is really the last one, it will propagated to the HCI layer. The HCI layer has been extended with a disconnect indication that allows it to ask upper layers for a disconnect reason. The upper layer must not support this callback and in that case it will nicely default to the existing behavior. If an upper layer like L2CAP can provide a disconnect reason that one will be used to disconnect the ACL or SCO link. No modification to the ACL disconnect timeout have been made. So in case of Linux to Linux connection the initiator will disconnect the ACL link before the acceptor side can signal the specific disconnect reason. That is perfectly fine since Linux doesn't make use of this value anyway. The L2CAP layer has a perfect valid error code for rejecting connection due to a security violation. It is unclear why the Bluetooth specification insists on having specific HCI disconnect reason. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Set authentication requirements if not availableMarcel Holtmann2009-02-271-0/+3
| | | | | | | | | | | | When no authentication requirements are selected, but an outgoing or incoming connection has requested any kind of security enforcement, then set these authentication requirements. This ensures that the userspace always gets informed about the authentication requirements (if available). Only when no security enforcement has happened, the kernel will signal invalid requirements. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Use general bonding whenever possibleMarcel Holtmann2009-02-271-14/+9
| | | | | | | | When receiving incoming connection to specific services, always use general bonding. This ensures that the link key gets stored and can be used for further authentications. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add SCO fallback for eSCO connection attemptsMarcel Holtmann2009-02-271-2/+7
| | | | | | | | | | | | | | | | | When attempting to setup eSCO connections it can happen that some link manager implementations fail to properly negotiate the eSCO parameters and thus fail the eSCO setup. Normally the link manager is responsible for the negotiation of the parameters and actually fallback to SCO if no agreement can be reached. In cases where the link manager is just too stupid, then at least try to establish a SCO link if eSCO fails. For the Bluetooth devices with EDR support this includes handling packet types of EDR basebands. This is particular tricky since for the EDR the logic of enabling/disabling one specific packet type is turned around. This fix contains an extra bitmask to disable eSCO EDR packet when trying to fallback to a SCO connection. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add enhanced security model for Simple PairingMarcel Holtmann2009-02-271-15/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Enable per-module dynamic debug messagesMarcel Holtmann2008-11-301-5/+0
| | | | | | | | | | | With the introduction of CONFIG_DYNAMIC_PRINTK_DEBUG it is possible to allow debugging without having to recompile the kernel. This patch turns all BT_DBG() calls into pr_debug() to support dynamic debug messages. As a side effect all CONFIG_BT_*_DEBUG statements are now removed and some broken debug entries have been fixed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Reject L2CAP connections on an insecure ACL linkMarcel Holtmann2008-09-091-0/+13
| | | | | | | | | | | | | | | | | | | | | The Security Mode 4 of the Bluetooth 2.1 specification has strict authentication and encryption requirements. It is the initiators job to create a secure ACL link. However in case of malicious devices, the acceptor has to make sure that the ACL is encrypted before allowing any kind of L2CAP connection. The only exception here is the PSM 1 for the service discovery protocol, because that is allowed to run on an insecure ACL link. Previously it was enough to reject a L2CAP connection during the connection setup phase, but with Bluetooth 2.1 it is forbidden to do any L2CAP protocol exchange on an insecure link (except SDP). The new hci_conn_check_link_mode() function can be used to check the integrity of an ACL link. This functions also takes care of the cases where Security Mode 4 is disabled or one of the devices is based on an older specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Enforce correct authentication requirementsMarcel Holtmann2008-09-091-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the introduction of Security Mode 4 and Simple Pairing from the Bluetooth 2.1 specification it became mandatory that the initiator requires authentication and encryption before any L2CAP channel can be established. The only exception here is PSM 1 for the service discovery protocol (SDP). It is meant to be used without any encryption since it contains only public information. This is how Bluetooth 2.0 and before handle connections on PSM 1. For Bluetooth 2.1 devices the pairing procedure differentiates between no bonding, general bonding and dedicated bonding. The L2CAP layer wrongly uses always general bonding when creating new connections, but it should not do this for SDP connections. In this case the authentication requirement should be no bonding and the just-works model should be used, but in case of non-SDP connection it is required to use general bonding. If the new connection requires man-in-the-middle (MITM) protection, it also first wrongly creates an unauthenticated link key and then later on requests an upgrade to an authenticated link key to provide full MITM protection. With Simple Pairing the link key generation is an expensive operation (compared to Bluetooth 2.0 and before) and doing this twice during a connection setup causes a noticeable delay when establishing a new connection. This should be avoided to not regress from the expected Bluetooth 2.0 connection times. The authentication requirements are known up-front and so enforce them. To fulfill these requirements the hci_connect() function has been extended with an authentication requirement parameter that will be stored inside the connection information and can be retrieved by userspace at any time. This allows the correct IO capabilities exchange and results in the expected behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Use a more unique bus name for connectionsMarcel Holtmann2008-07-141-3/+5
| | | | | | | | | | | | | | When attaching Bluetooth low-level connections to the bus, the bus name is constructed from the remote address since at that time the connection handle is not assigned yet. This has worked so far, but also caused a lot of troubles. It is better to postpone the creation of the sysfs entry to the time when the connection actually has been established and then use its connection handle as unique identifier. This also fixes the case where two different adapters try to connect to the same remote device. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Export details about authentication requirementsMarcel Holtmann2008-07-141-4/+34
| | | | | | | | | | | | | With the Simple Pairing support, the authentication requirements are an explicit setting during the bonding process. Track and enforce the requirements and allow higher layers like L2CAP and RFCOMM to increase them if needed. This patch introduces a new IOCTL that allows to query the current authentication requirements. It is also possible to detect Simple Pairing support in the kernel this way. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Use ACL config stage to retrieve remote featuresMarcel Holtmann2008-07-141-0/+2
| | | | | | | | | | | | | | | | | | | The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Track status of remote Simple Pairing modeMarcel Holtmann2008-07-141-5/+9
| | | | | | | | | | | | | | | | | | | The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Make use of the default link policy settingsMarcel Holtmann2008-07-141-0/+2
| | | | | | | | | | The Bluetooth specification supports the default link policy settings on a per host controller basis. For every new connection the link manager would then use these settings. It is better to use this instead of bothering the controller on every connection setup to overwrite the default settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Track connection packet type changesMarcel Holtmann2008-07-141-8/+24
| | | | | | | | | | | | | | | | | | | | The connection packet type can be changed after the connection has been established and thus needs to be properly tracked to ensure that the host stack has always correct and valid information about it. On incoming connections the Bluetooth core switches the supported packet types to the configured list for this controller. However the usefulness of this feature has been questioned a lot. The general consent is that every Bluetooth host stack should enable as many packet types as the hardware actually supports and leave the decision to the link manager software running on the Bluetooth chip. When running on Bluetooth 2.0 or later hardware, don't change the packet type for incoming connections anymore. This hardware likely supports Enhanced Data Rate and thus leave it completely up to the link manager to pick the best packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* bluetooth: put hci dev after del connDave Young2008-02-181-1/+0
| | | | | | | Move hci_dev_put to del_conn to avoid hci dev going away before hci conn. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Convert init_timer into setup_timerPavel Emelyanov2008-01-281-7/+2
| | | | | | | | | | | | | Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BLUETOOTH]: put_device before device_del fixDave Young2007-12-291-9/+1
| | | | | | | | Because of workqueue delay, the put_device could be called before device_del, so move it to del_conn. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [Bluetooth] Add support for handling simple eSCO linksMarcel Holtmann2007-10-221-5/+34
| | | | | | | | | | With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Switch from OGF+OCF to using only opcodesMarcel Holtmann2007-10-221-16/+27
| | | | | | | | | | | | The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Add basics to better support and handle eSCO linksMarcel Holtmann2007-07-111-26/+25
| | | | | | | | To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [NET] BLUETOOTH: Use cpu_to_le{16,32}() where appropriate.YOSHIFUJI Hideaki2007-04-251-18/+18
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud