summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_conn.c
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: Fix using the correct source address typeJohan Hedberg2016-11-221-2/+24
| | | | | | | | | | | | | | The hci_get_route() API is used to look up local HCI devices, however so far it has been incapable of dealing with anything else than the public address of HCI devices. This completely breaks with LE-only HCI devices that do not come with a public address, but use a static random address instead. This patch exteds the hci_get_route() API with a src_type parameter that's used for comparing with the right address of each HCI device. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Rename HCI_BREDR into HCI_PRIMARYMarcel Holtmann2016-07-091-1/+1
| | | | | | | | | | | | | | The HCI_BREDR naming is confusing since it actually stands for Primary Bluetooth Controller. Which is a term that has been used in the latest standard. However from a legacy point of view there only really have been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of Bluetooth introduced Low Energy (LE) and made this terminology a little bit confused since Dual Mode Controllers include BR/EDR and LE. To simplify this the name HCI_PRIMARY stands for the Primary Controller which can be a single mode or dual mode controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Add support for limited privacy modeJohan Hedberg2016-03-101-2/+11
| | | | | | | | | | | | Introduce a limited privacy mode indicated by value 0x02 to the mgmt Set Privacy command. With value 0x02 the kernel will use privacy mode with a resolvable private address. In case the controller is bondable and discoverable the identity address will be used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Move memset closer to where it's neededJohan Hedberg2016-03-101-2/+2
| | | | | | | | Minor fix to not do the memset until the variable it clears is actually used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Don't treat connection timeout as a failureJohan Hedberg2015-12-101-2/+10
| | | | | | | | | | | | | | | | | When we're doing background scanning and connection attempts it's possible we timeout trying to connect and go back to scanning again. The timeout triggers a HCI_LE_Create_Connection_Cancel which will trigger a Connection Complete with "Unknown Connection Identifier" error status. Since we go back to scanning this isn't really a failure and shouldn't be presented as such to user space through mgmt. The exception to this is if the connection attempt was due to an explicit request on an L2CAP socket (indicated by params->explicit_connect being true). Since the socket will get an error it's consistent to also notify the failure on mgmt in this case. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Use continuous scanning when creating LE connectionsJohan Hedberg2015-12-101-1/+5
| | | | | | | | | | | | All LE connections are now triggered through a preceding passive scan and waiting for a connectable advertising report. This means we've got the best possible guarantee that the device is within range and should be able to request the controller to perform continuous scanning. This way we minimize the risk that we miss out on any advertising packets. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.3+
* Bluetooth: Move advertising instance management to hci_request.cJohan Hedberg2015-12-101-1/+1
| | | | | | | | | | This paves the way for eventually performing advertising changes through the hdev->req_workqueue. Some new APIs need to be exposed from mgmt.c to hci_request.c and vice-versa, but many of them will go away once hdev->req_workqueue gets used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Remove conn_unfinished variable from hci_connect_le()Johan Hedberg2015-11-191-36/+12
| | | | | | | | | | The conn_unfinished variable makes the entire logic of hci_connect_le() rather confusing. By restructuring and clarifying the logic we can actually remove the conn_unfinished variable and still keep the same behavior. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Move check for ongoing connect earlier in hci_connect_le()Johan Hedberg2015-11-191-6/+6
| | | | | | | | This helps simplify the logic in further patches (less cleanups to do in this failure branch). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix specifying role for LE connectionsJohan Hedberg2015-11-191-2/+2
| | | | | | | | | | | The hci_connect_le_scan() is (as the name implies) a master/central role API, so it makes no sense in passing a role parameter to it. At the same time this patch also fixes the direct advertising support for LE L2CAP sockets where we now call the more appropriate hci_le_connect() API if slave/peripheral role is desired. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Use req_workqueue for explicit connect requestsJohan Hedberg2015-11-191-35/+4
| | | | | | | | | Since explicit connect requests are also a sub-category of passive scan updates, run them through the same workqueue as the other passive scan changes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add clarifying comment why schedule_work is usedJohan Hedberg2015-11-191-0/+4
| | | | | | | | It's not obvious why schedule_work is used instead of queue_work. Add a comment explaining why. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Make hci_disconnect() behave correctly for all statesJohan Hedberg2015-10-221-8/+3
| | | | | | | | | | There are a few places that don't explicitly check the connection state before calling hci_disconnect(). To make this API do the right thing take advantage of the new hci_abort_conn() API and also make sure to only read the clock offset if we're really connected. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Take advantage of connection abort helpersJohan Hedberg2015-10-221-71/+8
| | | | | | | | | Convert the various places mapping connection state to disconnect/cancel HCI command to use the new hci_abort_conn helper API. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Remove unnecessary hci_explicit_connect_lookup functionJohan Hedberg2015-10-211-2/+3
| | | | | | | | There's only one user of this helper which can be replaces with a call to hci_pend_le_action_lookup() and a check for params->explicit_connect. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add hdev helper variable to hci_le_create_connection_cancelJohan Hedberg2015-10-211-6/+7
| | | | | | | | | The hci_le_create_connection_cancel() function needs to use the hdev pointer in many places so add a variable for it to avoid the need to dereference the hci_conn every time. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Use hci_conn_hash_lookup_le() when possibleJohan Hedberg2015-10-211-6/+3
| | | | | | | | | Use the new hci_conn_hash_lookup_le() API to look up LE connections. This way we're guaranteed exact matches that also take into account the address type. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix missing hdev locking for LE scan cleanupJohan Hedberg2015-10-211-9/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hci_conn objects don't have a dedicated lock themselves but rely on the caller to hold the hci_dev lock for most types of access. The hci_conn_timeout() function has so far sent certain HCI commands based on the hci_conn state which has been possible without holding the hci_dev lock. The recent changes to do LE scanning before connect attempts added even more operations to hci_conn and hci_dev from hci_conn_timeout, thereby exposing potential race conditions with the hci_dev and hci_conn states. As an example of such a race, here there's a timeout but an l2cap_sock_connect() call manages to race with the cleanup routine: [Oct21 08:14] l2cap_chan_timeout: chan ee4b12c0 state BT_CONNECT [ +0.000004] l2cap_chan_close: chan ee4b12c0 state BT_CONNECT [ +0.000002] l2cap_chan_del: chan ee4b12c0, conn f3141580, err 111, state BT_CONNECT [ +0.000002] l2cap_sock_teardown_cb: chan ee4b12c0 state BT_CONNECT [ +0.000005] l2cap_chan_put: chan ee4b12c0 orig refcnt 4 [ +0.000010] hci_conn_drop: hcon f53d56e0 orig refcnt 1 [ +0.000013] l2cap_chan_put: chan ee4b12c0 orig refcnt 3 [ +0.000063] hci_conn_timeout: hcon f53d56e0 state BT_CONNECT [ +0.000049] hci_conn_params_del: addr ee:0d:30:09:53:1f (type 1) [ +0.000002] hci_chan_list_flush: hcon f53d56e0 [ +0.000001] hci_chan_del: hci0 hcon f53d56e0 chan f4e7ccc0 [ +0.004528] l2cap_sock_create: sock e708fc00 [ +0.000023] l2cap_chan_create: chan ee4b1770 [ +0.000001] l2cap_chan_hold: chan ee4b1770 orig refcnt 1 [ +0.000002] l2cap_sock_init: sk ee4b3390 [ +0.000029] l2cap_sock_bind: sk ee4b3390 [ +0.000010] l2cap_sock_setsockopt: sk ee4b3390 [ +0.000037] l2cap_sock_connect: sk ee4b3390 [ +0.000002] l2cap_chan_connect: 00:02:72:d9:e5:8b -> ee:0d:30:09:53:1f (type 2) psm 0x00 [ +0.000002] hci_get_route: 00:02:72:d9:e5:8b -> ee:0d:30:09:53:1f [ +0.000001] hci_dev_hold: hci0 orig refcnt 8 [ +0.000003] hci_conn_hold: hcon f53d56e0 orig refcnt 0 Above the l2cap_chan_connect() shouldn't have been able to reach the hci_conn f53d56e0 anymore but since hci_conn_timeout didn't do proper locking that's not the case. The end result is a reference to hci_conn that's not in the conn_hash list, resulting in list corruption when trying to remove it later: [Oct21 08:15] l2cap_chan_timeout: chan ee4b1770 state BT_CONNECT [ +0.000004] l2cap_chan_close: chan ee4b1770 state BT_CONNECT [ +0.000003] l2cap_chan_del: chan ee4b1770, conn f3141580, err 111, state BT_CONNECT [ +0.000001] l2cap_sock_teardown_cb: chan ee4b1770 state BT_CONNECT [ +0.000005] l2cap_chan_put: chan ee4b1770 orig refcnt 4 [ +0.000002] hci_conn_drop: hcon f53d56e0 orig refcnt 1 [ +0.000015] l2cap_chan_put: chan ee4b1770 orig refcnt 3 [ +0.000038] hci_conn_timeout: hcon f53d56e0 state BT_CONNECT [ +0.000003] hci_chan_list_flush: hcon f53d56e0 [ +0.000002] hci_conn_hash_del: hci0 hcon f53d56e0 [ +0.000001] ------------[ cut here ]------------ [ +0.000461] WARNING: CPU: 0 PID: 1782 at lib/list_debug.c:56 __list_del_entry+0x3f/0x71() [ +0.000839] list_del corruption, f53d56e0->prev is LIST_POISON2 (00000200) The necessary fix is unfortunately more complicated than just adding hci_dev_lock/unlock calls to the hci_conn_timeout() call path. Particularly, the hci_conn_del() API, which expects the hci_dev lock to be held, performs a cancel_delayed_work_sync(&hcon->disc_work) which would lead to a deadlock if the hci_conn_timeout() call path tries to acquire the same lock. This patch solves the problem by deferring the cleanup work to a separate work callback. To protect against the hci_dev or hci_conn going away meanwhile temporary references are taken with the help of hci_dev_hold() and hci_conn_get(). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.3
* Bluetooth: Fix initializing conn_params in scan phaseJakub Pawlowski2015-10-161-7/+15
| | | | | | | | | This patch makes sure that conn_params that were created just for explicit_connect, will get properly deleted during cleanup. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix conn_params list update in hci_connect_le_scan_cleanupJohan Hedberg2015-10-161-4/+19
| | | | | | | | | After clearing the params->explicit_connect variable the parameters may need to be either added back to the right list or potentially left absent from both the le_reports and the le_conns lists. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix LE reconnection logicJohan Hedberg2015-10-161-2/+2
| | | | | | | | | | | | | | | | We can't use hci_explicit_connect_lookup() since that would only cover explicit connections, leaving normal reconnections completely untouched. Not using it in turn means leaving out entries in pend_le_reports. To fix this and simplify the logic move conn params from the reports list to the pend_le_conns list for the duration of an explicit connect. Once the connect is complete move the params back to the pend_le_reports list. This also means that the explicit connect lookup function only needs to look into the pend_le_conns list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix reference counting for LE-scan based connectionsJohan Hedberg2015-10-161-17/+36
| | | | | | | | | | | | | | | | | The code should never directly call hci_conn_hash_del since many cleanup & reference counting updates would be lost. Normally hci_conn_del is the right thing to do, but in the case of a connection doing LE scanning this could cause a deadlock due to doing a cancel_delayed_work_sync() on the same work callback that we were called from. Connections in the LE scanning state actually need very little cleanup - just a small subset of hci_conn_del. To solve the issue, refactor out these essential pieces into a new hci_conn_cleanup() function and call that from the two necessary places. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix double scan updatesJakub Pawlowski2015-10-161-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | When disable/enable scan command is issued twice, some controllers will return an error for the second request, i.e. requests with this command will fail on some controllers, and succeed on others. This patch makes sure that unnecessary scan disable/enable commands are not issued. When adding device to the auto connect whitelist when there is pending connect attempt, there is no need to update scan. hci_connect_le_scan_cleanup is conditionally executing hci_conn_params_del, that is calling hci_update_background_scan. Make the other case also update scan, and remove reduntand call from hci_connect_le_scan_remove. When stopping interleaved discovery the state should be set to stopped only when both LE scanning and discovery has stopped. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: timeout handling in new connect procedureJakub Pawlowski2015-08-101-2/+6
| | | | | | | | | | | | | | Currently, when trying to connect to already paired device that just rotated its RPA MAC address, old address would be used and connection would fail. In order to fix that, kernel must scan and receive advertisement with fresh RPA before connecting. This patch makes sure that when new procedure is in use, and we're stuck in scan phase because no advertisement was received and timeout happened, or app decided to close socket, scan whitelist gets properly cleaned up. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: advertisement handling in new connect procedureJakub Pawlowski2015-08-101-15/+37
| | | | | | | | | | | | | | | | | Currently, when trying to connect to already paired device that just rotated its RPA MAC address, old address would be used and connection would fail. In order to fix that, kernel must scan and receive advertisement with fresh RPA before connecting. This path makes sure that after advertisement is received from device that we try to connect to, it is properly handled in check_pending_le_conn and trigger connect attempt. It also modifies hci_le_connect to make sure that connect attempt will be properly continued. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: add hci_connect_le_scanJakub Pawlowski2015-08-101-0/+174
| | | | | | | | | | | | | | | | Currently, when trying to connect to already paired device that just rotated its RPA MAC address, old address would be used and connection would fail. In order to fix that, kernel must scan and receive advertisement with fresh RPA before connecting. This patch adds hci_connect_le_scan with dependencies, new method that will be used to connect to remote LE devices. Instead of just sending connect request, it adds a device to whitelist. Later patches will make use of this whitelist to send conenct request when advertisement is received, and properly handle timeouts. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: add hci_lookup_le_connectJakub Pawlowski2015-08-101-3/+2
| | | | | | | | This patch adds hci_lookup_le_connect method, that will be used to check wether outgoing le connection attempt is in progress. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix encryption key size handling for LTKsJohan Hedberg2015-06-091-2/+2
| | | | | | | | | | | The encryption key size for LTKs is supposed to be applied only at the moment of encryption. When generating a Link Key (using LE SC) from the LTK the full non-shortened value should be used. This patch modifies the code to always keep the full value around and only apply the key size when passing the value to HCI. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Introduce hci_dev_clear_flag helper macroMarcel Holtmann2015-03-131-1/+1
| | | | | | | | Instead of manually coding clear_bit on hdev->dev_flags all the time, use hci_dev_clear_flag helper macro. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Introduce hci_dev_set_flag helper macroMarcel Holtmann2015-03-131-1/+1
| | | | | | | | Instead of manually coding set_bit on hdev->dev_flags all the time, use hci_dev_set_flag helper macro. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Introduce hci_dev_test_flag helper macroMarcel Holtmann2015-03-131-7/+7
| | | | | | | | Instead of manually coding test_bit on hdev->dev_flags all the time, use hci_dev_test_flag helper macro. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Convert disconn_cfm to be triggered through hci_cbJohan Hedberg2015-02-191-1/+1
| | | | | | | | | | | | This patch moves all the disconn_cfm callbacks to be based on the hci_cb list. This means making l2cap_disconn_cfm private to l2cap_core.c and sco_conn_cb private to sco.c respectively. Since the hci_conn type filtering isn't done any more on the wrapper level the callbacks themselves need to check that they were passed a relevant type of connection. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Convert connect_cfm to be triggered through hci_cbJohan Hedberg2015-02-191-2/+2
| | | | | | | | | | | | This patch moves all the connect_cfm callbacks to be based on the hci_cb list. This means making l2cap_connect_cfm private to l2cap_core.c and sco_connect_cb private to sco.c respectively. Since the hci_conn type filtering isn't done any more on the wrapper level the callbacks themselves need to check that they were passed a relevant type of connection. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Improve error handling in connect aclLukasz Rymanowski2015-02-141-1/+5
| | | | | | | | | With this patch -EOPNOTSUPP will be returned by hci_connect_acl for LE only controllers. If it is dual device with disabled BREDR -ECONNREFUSED will be returned Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Do not allow LE connection if LE is not enabledLukasz Rymanowski2015-02-141-0/+8
| | | | | | | | | | | | | Kernel gives possibility to enable/disable LE host support. There is flag HCI_LE_ENABLED which is set when this support is enabled and some parts of the code checks this flag e.g. SMP However it is still possible to make LE connection if LE Host support is disabled, what might be confused for remote device. This patch makes sure that kernel will not send HCI LE Create Connection if LE HOST support is not enabled. Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Remove unused functionRickard Strandqvist2015-01-161-15/+0
| | | | | | | | | | Remove the function hci_conn_change_link_key() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Add opcode parameter to hci_req_complete_t callbackMarcel Holtmann2015-01-121-1/+1
| | | | | | | | | | | | When hci_req_run() calls its provided complete function and one of the HCI commands in the sequence fails, then provide the opcode of failing command. In case of success HCI_OP_NOP is provided since all commands completed. This patch fixes the prototype of hci_req_complete_t and all its users. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Create debugfs directory for each connection handleMarcel Holtmann2014-12-201-0/+3
| | | | | | | | | For every internal representation of a Bluetooth connection which is identified by hci_conn, create a debugfs directory with the handle number as directory name. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Split hci_request helpers to hci_request.[ch]Johan Hedberg2014-12-191-0/+1
| | | | | | | | | | None of the hci_request related things in net/bluetooth/hci_core.h are needed anywhere outside of the core bluetooth module. This patch creates a new net/bluetooth/hci_request.c file with its corresponding h-file and moves the functionality there from hci_core.c and hci_core.h. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix generation of non-resolvable private addressesMarcel Holtmann2014-12-081-1/+1
| | | | | | | | | | | | | | When the host decides to use a non-resolvable private address, it must ensure that this generated address does not match the public address of the controller. Add an extra check to ensure this required behavior. In addition rename the variable from urpa to nrpa and fix all of the comments in the code that use the term unresolvable instead of the term non-resolvable as used in the Bluetooth specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Fix initializing hci_conn RSSI to invalid valueJohan Hedberg2014-12-051-0/+1
| | | | | | | | When we create the hci_conn object we should properly initialize the RSSI to HCI_RSSI_INVALID. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix check for direct advertisingJohan Hedberg2014-10-281-1/+1
| | | | | | | | | | | | | | These days we allow simultaneous LE scanning and advertising. Checking for whether advertising is enabled or not is therefore not a reliable way to determine whether directed advertising was used to trigger the connection creation. The appropriate place to check (instead of the hdev context) is the connection role that's stored in the hci_conn. This patch fixes such a check in le_conn_timeout() which could otherwise lead to incorrect HCI commands being sent. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.16.x
* Bluetooth: Fix LE connection timeout deadlockJohan Hedberg2014-10-281-1/+1
| | | | | | | | | | | | The le_conn_timeout() may call hci_le_conn_failed() which in turn may call hci_conn_del(). Trying to use the _sync variant for cancelling the conn timeout from hci_conn_del() could therefore result in a deadlock. This patch converts hci_conn_del() to use the non-sync variant so the deadlock is not possible. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.16.x
* Bluetooth: fix shadow warning in hci_disconnect()Fabian Frederick2014-10-251-3/+4
| | | | | | | | | use clkoff_cp for hci_cp_read_clock_offset instead of cp (already defined above). Suggested-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Defer connection-parameter removal when unpairingAlfonso Acosta2014-10-251-0/+3
| | | | | | | | | | | | | | | | | | Systematically removing the LE connection parameters and autoconnect action is inconvenient for rebonding without disconnecting from userland (i.e. unpairing followed by repairing without disconnecting). The parameters will be lost after unparing and userland needs to take care of book-keeping them and re-adding them. This patch allows userland to forget about parameter management when rebonding without disconnecting. It defers clearing the connection parameters when unparing without disconnecting, giving a chance of keeping the parameters if a repairing happens before the connection is closed. Signed-off-by: Alfonso Acosta <fons@spotify.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Rename sco_param_wideband table to esco_param_msbcJohan Hedberg2014-09-251-3/+3
| | | | | | | | | The sco_param_wideband table represents the eSCO parameters for specifically mSBC encoding. This patch renames the table to the more descriptive esco_param_msbc name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add retransmission effort into SCO parameter tableJohan Hedberg2014-09-241-12/+11
| | | | | | | | | | | It is expected that new parameter combinations will have the retransmission effort value different between some entries (mainly because of the new S4 configuration added by HFP 1.7), so it makes sense to move it into the table instead of having it hard coded based on the selected SCO_AIRMODE_*. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix reason code used for rejecting SCO connectionsJohan Hedberg2014-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | The core specification defines valid values for the HCI_Reject_Synchronous_Connection_Request command to be 0x0D-0x0F. So far the code has been using HCI_ERROR_REMOTE_USER_TERM (0x13) which is not a valid value and is therefore being rejected by some controllers: > HCI Event: Connect Request (0x04) plen 10 bdaddr 40:6F:2A:6A:E5:E0 class 0x000000 type eSCO < HCI Command: Reject Synchronous Connection (0x01|0x002a) plen 7 bdaddr 40:6F:2A:6A:E5:E0 reason 0x13 Reason: Remote User Terminated Connection > HCI Event: Command Status (0x0f) plen 4 Reject Synchronous Connection (0x01|0x002a) status 0x12 ncmd 1 Error: Invalid HCI Command Parameters This patch introduces a new define for a value from the valid range (0x0d == Connection Rejected Due To Limited Resources) and uses it instead for rejecting incoming connections. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Check for SCO type before setting retransmission effortBernhard Thaler2014-09-231-5/+17
| | | | | | | | | | | | | | | | SCO connection cannot be setup to devices that do not support retransmission. Patch based on http://permalink.gmane.org/gmane.linux.bluez.kernel/7779 and adapted for this kernel version. Code changed to check SCO/eSCO type before setting retransmission effort and max. latency. The purpose of the patch is to support older devices not capable of eSCO. Tested on Blackberry 655+ headset which does not support retransmission. Credits go to Alexander Sommerhuber. Signed-off-by: Bernhard Thaler <bernhard.thaler@r-it.at> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Move clock offset reading into hci_disconnect()Johan Hedberg2014-09-081-19/+13
| | | | | | | | | | To give all hci_disconnect() users the advantage of getting the clock offset read automatically this patch moves the necessary code from hci_conn_timeout() into hci_disconnect(). This way we pretty much always update the clock offset when disconnecting. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
OpenPOWER on IntegriCloud