summaryrefslogtreecommitdiffstats
path: root/net/batman-adv
Commit message (Collapse)AuthorAgeFilesLines
* batman: fix a bogus warning from batadv_is_on_batman_iface()Cong Wang2014-05-221-1/+1
| | | | | | | | | | | | | | | | batman tries to search dev->iflink to check if it's a batman interface, but ->iflink could be 0, which is not a valid ifindex. It should just avoid iflink == 0 case. Reported-by: Jet Chen <jet.chen@intel.com> Tested-by: Jet Chen <jet.chen@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Antonio Quartulli <antonio@open-mesh.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* batman-adv: fix local TT check for outgoing arp requests in DATAntonio Quartulli2014-05-151-2/+1
| | | | | | | | | | | | | | | | | | | | Change introduced by 88e48d7b3340ef07b108eb8a8b3813dd093cc7f7 ("batman-adv: make DAT drop ARP requests targeting local clients") implements a check that prevents DAT from using the caching mechanism when the client that is supposed to provide a reply to an arp request is local. However change brought by be1db4f6615b5e6156c807ea8985171c215c2d57 ("batman-adv: make the Distributed ARP Table vlan aware") has not converted the above check into its vlan aware version thus making it useless when the local client is behind a vlan. Fix the behaviour by properly specifying the vlan when checking for a client being local or not. Reported-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: increase orig refcount when storing ref in gw_nodeAntonio Quartulli2014-05-151-2/+9
| | | | | | | | | | | | | | A pointer to the orig_node representing a bat-gateway is stored in the gw_node->orig_node member, but the refcount for such orig_node is never increased. This leads to memory faults when gw_node->orig_node is accessed and the originator has already been freed. Fix this by increasing the refcount on gw_node creation and decreasing it on gw_node free. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: fix reference counting imbalance while sending fragmentAntonio Quartulli2014-05-151-3/+8
| | | | | | | | | | | | | | | | | | | In the new fragmentation code the batadv_frag_send_packet() function obtains a reference to the primary_if, but it does not release it upon return. This reference imbalance prevents the primary_if (and then the related netdevice) to be properly released on shut down. Fix this by releasing the primary_if in batadv_frag_send_packet(). Introduced by ee75ed88879af88558818a5c6609d85f60ff0df4 ("batman-adv: Fragment and send skbs larger than mtu") Cc: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Martin Hundebøll <martin@hundeboll.net>
* batman-adv: fix indirect hard_iface NULL dereferenceMarek Lindner2014-05-151-1/+2
| | | | | | | | | | | | | If hard_iface is NULL and goto out is made batadv_hardif_free_ref() doesn't check for NULL before dereferencing it to get to refcount. Introduced in cb1c92ec37fb70543d133a1fa7d9b54d6f8a1ecd ("batman-adv: add debugfs support to view multiif tables"). Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: fix removing neigh_ifinfoSimon Wunderlich2014-05-111-0/+46
| | | | | | | | | | | | | | | | When an interface is removed separately, all neighbors need to be checked if they have a neigh_ifinfo structure for that particular interface. If that is the case, remove that ifinfo so any references to a hard interface can be freed. This is a regression introduced by 89652331c00f43574515059ecbf262d26d885717 ("batman-adv: split tq information in neigh_node struct") Reported-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: always run purge_orig_neighborsSimon Wunderlich2014-05-101-4/+4
| | | | | | | | | | | | | | The current code will not execute batadv_purge_orig_neighbors() when an orig_ifinfo has already been purged. However we need to run it in any case. Fix that. This is a regression introduced by 7351a4822d42827ba0110677c0cbad88a3d52585 ("batman-adv: split out router from orig_node") Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: fix neigh reference imbalanceSimon Wunderlich2014-05-101-0/+5
| | | | | | | | | | | | | | | | | When an interface is removed from batman-adv, the orig_ifinfo of a orig_node may be removed without releasing the router first. This will prevent the reference for the neighbor pointed at by the orig_ifinfo->router to be released, and this leak may result in reference leaks for the interface used by this neighbor. Fix that. This is a regression introduced by 7351a4822d42827ba0110677c0cbad88a3d52585 ("batman-adv: split out router from orig_node"). Reported-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: fix neigh_ifinfo imbalanceSimon Wunderlich2014-05-101-0/+2
| | | | | | | | | | | | | | The neigh_ifinfo object must be freed if it has been used in batadv_iv_ogm_process_per_outif(). This is a regression introduced by 89652331c00f43574515059ecbf262d26d885717 ("batman-adv: split tq information in neigh_node struct") Reported-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: Start new development cycleSimon Wunderlich2014-03-221-1/+1
| | | | | Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: improve DAT documentationAntonio Quartulli2014-03-222-2/+6
| | | | | | | | Add missing documentation for BATADV_DAT_ADDR_MAX and convert an existing documentation to kerneldoc Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: improve the TT flags documentationAntonio Quartulli2014-03-221-4/+24
| | | | | | | | | Convert the current documentation for the TT flags in proper kerneldoc and improve it by adding an explanation for each of the flags. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: Send multicast packets to nodes with a WANT_ALL flagLinus Lüssing2014-03-226-3/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast supportLinus Lüssing2014-03-226-8/+156
| | | | | | | | | | | | | | | | | | | | | | | | | With this patch a node may additionally perform the dropping or unicasting behaviour for a link-local IPv4 and link-local-all-nodes IPv6 multicast packet, too. The extra counter and BATADV_MCAST_WANT_ALL_UNSNOOPABLES flag is needed because with a future bridge snooping support integration a node with a bridge on top of its soft interface is not able to reliably detect its multicast listeners for IPv4 link-local and the IPv6 link-local-all-nodes addresses anymore (see RFC4541, section 2.1.2.2 and section 3). Even though this new flag does make "no difference" now, it'll ensure a seamless integration of multicast bridge support without needing to break compatibility later. Also note, that even with multicast bridge support it won't be possible to optimize 224.0.0.x and ff02::1 towards nodes with bridges, they will always receive these ranges. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: Modified forwarding behaviour for multicast packetsLinus Lüssing2014-03-229-26/+266
| | | | | | | | | | | | | | | | | | | | | With this patch a multicast packet is not always simply flooded anymore, the behaviour for the following cases is changed to reduce unnecessary overhead: If all nodes within the horizon of a certain node have signalized multicast listener announcement capability then an IPv6 multicast packet with a destination of IPv6 link-local scope (excluding ff02::1) coming from the upstream of this node... * ...is dropped if there is no according multicast listener in the translation table, * ...is forwarded via unicast if there is a single node with interested multicast listeners * ...and otherwise still gets flooded. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: Announce new capability via multicast TVLVLinus Lüssing2014-03-227-6/+167
| | | | | | | | | | | If the soft interface of a node is not part of a bridge then a node announces a new multicast TVLV: The existence of this TVLV signalizes that this node is announcing all of its multicast listeners via the translation table infrastructure. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: introduce capability initialization bitfieldLinus Lüssing2014-03-223-9/+11
| | | | | | | | | | | | The new bitfield allows us to keep track whether capability subsets of an originator have gone through their initialization phase yet. The translation table is the only user right now, but a new one will be added soon. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: Multicast Listener Announcements via Translation TableLinus Lüssing2014-03-228-4/+318
| | | | | | | | | | With this patch a node which has no bridge interface on top of its soft interface announces its local multicast listeners via the translation table. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: add kerneldoc for dst_hint argumentAntonio Quartulli2014-03-222-0/+3
| | | | | | | | Some helper functions used along the TX path have now a new "dst_hint" argument but the kerneldoc was missing. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: call unregister_netdev() to have it handle the locking for usMarek Lindner2014-03-221-4/+1
| | | | | | Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: fix a few kerneldoc inconsistenciesSimon Wunderlich2014-03-221-5/+5
| | | | | | | Reported-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: prefer ether_addr_copy to memcpyAntonio Quartulli2014-03-2213-71/+70
| | | | | | | | On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: remove obsolete skb_reset_mac_header() in batadv_bla_tx()Linus Lüssing2014-03-221-3/+0
| | | | | | | | | | | | | | | Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb mac header pointer set correctly since the following commit present in kernels >= 3.9: "net: reset mac header in dev_start_xmit()" (6d1ccff627) Therefore this commit removes the according, now redundant, skb_reset_mac_header() call in batadv_bla_tx(). Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: use vlan_/eth_hdr() instead of skb->data in interface_tx pathLinus Lüssing2014-03-225-14/+18
| | | | | | | | | | | | | | | | | | Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb mac header pointer set correctly since the following commit present in kernels >= 3.9: "net: reset mac header in dev_start_xmit()" (6d1ccff627) Therefore we can safely use eth_hdr() and vlan_eth_hdr() instead of skb->data now, which spares us some ugly type casts. At the same time set the mac_header in batadv_dat_snoop_incoming_arp_request() before sending the skb along the TX path. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: fix coccinelle warningsFengguang Wu2014-03-221-1/+1
| | | | | | | | | | net/batman-adv/network-coding.c:1535:1-7: Replace memcpy with struct assignment Generated by: coccinelle/misc/memcpy-assign.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-02-197-27/+101
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * batman-adv: fix potential kernel paging error for unicast transmissionsAntonio Quartulli2014-02-171-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | batadv_send_skb_prepare_unicast(_4addr) might reallocate the skb's data. If it does then our ethhdr pointer is not valid anymore in batadv_send_skb_unicast(), resulting in a kernel paging error. Fixing this by refetching the ethhdr pointer after the potential reallocation. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
| * batman-adv: avoid double free when orig_node initialization failsAntonio Quartulli2014-02-171-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | In the failure path of the orig_node initialization routine the orig_node->bat_iv.bcast_own field is free'd twice: first in batadv_iv_ogm_orig_get() and then later in batadv_orig_node_free_rcu(). Fix it by removing the kfree in batadv_iv_ogm_orig_get(). Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: free skb on TVLV parsing successAntonio Quartulli2014-02-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the TVLV parsing routine succeed the skb is left untouched thus leading to a memory leak. Fix this by consuming the skb in case of success. Introduced by ef26157747d42254453f6b3ac2bd8bd3c53339c3 ("batman-adv: tvlv - basic infrastructure") Reported-by: Russel Senior <russell@personaltelco.net> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Tested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: fix TT CRC computation by ensuring byte orderAntonio Quartulli2014-02-171-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When computing the CRC on a 2byte variable the order of the bytes obviously alters the final result. This means that computing the CRC over the same value on two archs having different endianess leads to different numbers. The global and local translation table CRC computation routine makes this mistake while processing the clients VIDs. The result is a continuous CRC mismatching between nodes having different endianess. Fix this by converting the VID to Network Order before processing it. This guarantees that every node uses the same byte order. Introduced by 7ea7b4a142758deaf46c1af0ca9ceca6dd55138b ("batman-adv: make the TT CRC logic VLAN specific") Reported-by: Russel Senior <russell@personaltelco.net> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Tested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: fix potential orig_node reference leakSimon Wunderlich2014-02-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Since batadv_orig_node_new() sets the refcount to two, assuming that the calling function will use a reference for putting the orig_node into a hash or similar, both references must be freed if initialization of the orig_node fails. Otherwise that object may be leaked in that error case. Reported-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
| * batman-adv: avoid potential race condition when adding a new neighbourAntonio Quartulli2014-02-173-6/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When adding a new neighbour it is important to atomically perform the following: - check if the neighbour already exists - append the neighbour to the proper list If the two operations are not performed in an atomic context it is possible that two concurrent insertions add the same neighbour twice. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: properly check pskb_may_pull return valueAntonio Quartulli2014-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | pskb_may_pull() returns 1 on success and 0 in case of failure, therefore checking for the return value being negative does not make sense at all. This way if the function fails we will probably read beyond the current skb data buffer. Fix this by doing the proper check. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: release vlan object after checking the CRCAntonio Quartulli2014-02-171-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a refcounter unbalance in the CRC checking routine invoked on OGM reception. A vlan object is retrieved (thus its refcounter is increased by one) but it is never properly released. This leads to a memleak because the vlan object will never be free'd. Fix this by releasing the vlan object after having read the CRC. Reported-by: Russell Senior <russell@personaltelco.net> Reported-by: Daniel <daniel@makrotopia.org> Reported-by: cmsv <cmsv@wirelesspt.net> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: fix TT-TVLV parsing on OGM receptionAntonio Quartulli2014-02-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When accessing a TT-TVLV container in the OGM RX path the variable pointing to the list of changes to apply is altered by mistake. This makes the TT component read data at the wrong position in the OGM packet buffer. Fix it by removing the bogus pointer alteration. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
| * batman-adv: fix soft-interface MTU computationAntonio Quartulli2014-02-171-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current MTU computation always returns a value smaller than 1500bytes even if the real interfaces have an MTU large enough to compensate the batman-adv overhead. Fix the computation by properly returning the highest admitted value. Introduced by a19d3d85e1b854e4a483a55d740a42458085560d ("batman-adv: limit local translation table max size") Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* | net: remove unnecessary return'sstephen hemminger2014-02-131-2/+0
|/ | | | | | | | | | | One of my pet coding style peeves is the practice of adding extra return; at the end of function. Kill several instances of this in network code. I suppose some coccinelle wizardy could do this automatically. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-01-181-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c net/ipv4/tcp_metrics.c Overlapping changes between the "don't create two tcp metrics objects with the same key" race fix in net and the addition of the destination address in the lookup key in net-next. Minor overlapping changes in bnx2x driver. Signed-off-by: David S. Miller <davem@davemloft.net>
| * batman-adv: fix batman-adv header overhead calculationMarek Lindner2014-01-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Batman-adv prepends a full ethernet header in addition to its own header. This has to be reflected in the MTU calculation, especially since the value is used to set dev->hard_header_len. Introduced by 411d6ed93a5d0601980d3e5ce75de07c98e3a7de ("batman-adv: consider network coding overhead when calculating required mtu") Reported-by: cmsv <cmsv@wirelesspt.net> Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* | Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller2014-01-164-13/+31
|\ \ | | | | | | | | | | | | | | | | | | Included change: - properly format already existing kerneldoc Signed-off-by: David S. Miller <davem@davemloft.net>
| * | batman-adv: use consistent kerneldoc styleSimon Wunderlich2014-01-164-13/+31
| | | | | | | | | | | | | | | | | | | | | Reported-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* | | Revert "batman-adv: drop dependency against CRC16"David S. Miller2014-01-151-0/+1
|/ / | | | | | | | | | | | | | | This reverts commit 12afc36e38b3b6a0ec9bda71632c2285e7fdbab2. The dependency is actually still necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
* | batman-adv: use __dev_get_by_index instead of dev_get_by_index to find interfaceYing Xue2014-01-141-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following call chains indicate that batadv_is_on_batman_iface() is always under rtnl_lock protection as call_netdevice_notifier() is protected by rtnl_lock. So if __dev_get_by_index() rather than dev_get_by_index() is used to find interface handler in it, this would help us avoid to change interface reference counter. call_netdevice_notifier() batadv_hard_if_event() batadv_hardif_add_interface() batadv_is_valid_iface() batadv_is_on_batman_iface() Cc: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | batman-adv: drop dependency against CRC16Antonio Quartulli2014-01-121-1/+0
| | | | | | | | | | | | | | The crc16 functionality is not used anymore, therefore we can safely remove the dependency in the Kbuild file. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* | batman-adv: Start new development cycleSimon Wunderlich2014-01-121-1/+1
| | | | | | | | | | Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* | batman-adv: update copyright years for 2014Simon Wunderlich2014-01-1241-41/+41
| | | | | | | | | | | | Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* | batman-adv: add build checks for packet sizesSimon Wunderlich2014-01-121-7/+17
| | | | | | | | | | | | | | | | | | | | | | With unrolling the batadv_header into the respective structures, the offsetof checks are now useless. Instead, add build checks for all packet types which go over the wire to avoid problems with wrong sizes or compatibility issues on some architectures which don't use every day. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* | batman-adv: remove returns at the end of void functionsAntonio Quartulli2014-01-121-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | Return at the end of void functions is not needed. Since most of the void functions in the code do not do so, make all the others consistent by removing the useless returns. Actually all the functions to be "fixed" are in network-coding.h only. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* | batman-adv: add debugfs support to view multiif tablesSimon Wunderlich2014-01-125-7/+73
| | | | | | | | | | | | | | | | | | | | | | | | Show tables for the multi interface operation. Originator tables are added per hard interface. This patch also changes the API by adding the interface to the bat_orig_print() parameters. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* | batman-adv: add debugfs structure for information per interfaceSimon Wunderlich2014-01-124-0/+86
| | | | | | | | | | | | | | | | | | | | To show information per interface, add a debugfs hardif structure similar to the system in sysfs. Hard interface folders will be created in "$debugfs/batman-adv/". Files are not yet added. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
OpenPOWER on IntegriCloud