summaryrefslogtreecommitdiffstats
path: root/net/batman-adv/types.h
Commit message (Collapse)AuthorAgeFilesLines
* batman-adv: generalize batman-adv icmp packet handlingSimon Wunderlich2013-10-231-1/+1
| | | | | | | | | | | | | | | | Instead of handling icmp packets only up to length of icmp_packet_rr, the code should handle any icmp length size. Therefore the length truncating is moved to when the packet is actually sent to userspace (this does not support lengths longer than icmp_packet_rr yet). Longer packets are forwarded without truncating. This patch also cleans up some parts where the icmp header struct could be used instead of other icmp_packet(_rr) structs to make the code more readable. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: include the sync-flags when compute the global/local table CRCAntonio Quartulli2013-10-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | Flags covered by TT_SYNC_MASK are kept in sync among the nodes in the network and therefore they have to be considered while computing the global/local table CRC. In this way a generic originator is able to understand if its table contains the correct flags or not. Bits from 4 to 7 in the TT flags fields are now reserved for "synchronized" flags only. This allows future developers to add more flags of this type without breaking compatibility. It's important to note that not all the remote TT flags are synchronised. This comes from the fact that some flags are used to inject an information once only. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: improve the TT component to support runtime flag changesAntonio Quartulli2013-10-231-0/+6
| | | | | | | | | | | | | | | | Some flags (i.e. the WIFI flag) may change after that the related client has already been announced. However it is useful to informa the rest of the network about this change. Add a runtime-flag-switch detection mechanism and re-announce the related TT entry to advertise the new flag value. This mechanism can be easily exploited by future flags that may need the same treatment. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
* batman-adv: limit local translation table max sizeMarek Lindner2013-10-231-0/+3
| | | | | | | | | | | | | | | The local translation table size is limited by what can be transferred from one node to another via a full table request. The number of entries fitting into a full table request depend on whether the fragmentation is enabled or not. Therefore this patch introduces a max table size check and refuses to add more local clients when that size is reached. Moreover, if the max full table packet size changes (MTU change or fragmentation is disabled) the local table is downsized instantaneously. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: provide orig_node routing APIAntonio Quartulli2013-10-231-0/+11
| | | | | | | | | | | | | | | | | | | | | Some operations executed on an orig_node depends on the current routing algorithm being used. To easily make this mechanism routing algorithm agnostic add a orig_node specific API that each algorithm can populate with its own routines. Such routines are then invoked by the code when needed, without knowing which routing algorithm is currently in use With this patch 3 API functions are added: - orig_free (to free routing depending internal structs) - orig_add_if (to change the inner state of an orig_node when a new hard interface is added) - orig_del_if (to change the inner state of an orig_node when an hard interface is removed) Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: add bat_neigh_is_equiv_or_better API functionAntonio Quartulli2013-10-231-0/+4
| | | | | | | | | | | | Each routing protocol has its own metric semantic and therefore is the protocol itself the only component able to compare two metrics to check their "similarity". This new API allows each routing protocol to implement its own logic and make the external code protocol agnostic. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: add bat_neigh_cmp API functionAntonio Quartulli2013-10-231-0/+3
| | | | | | | | | This new API allows to compare the two neighbours based on the metric avoiding the user to deal with any routing algorithm specific detail Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: add bat_orig_print API functionAntonio Quartulli2013-10-231-0/+3
| | | | | | | | | | | | Each routing protocol has its own metric and private variables, therefore it is useful to introduce a new API for originator information printing. This API needs to be implemented by each protocol in order to provide its specific originator table output. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: make struct batadv_orig_node algorithm agnosticAntonio Quartulli2013-10-231-11/+19
| | | | | | | | | | some of the struct batadv_orig_node members are B.A.T.M.A.N. IV specific and therefore they are moved in a algorithm specific substruct in order to make batadv_orig_node routing algorithm agnostic Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: make struct batadv_neigh_node algorithm agnosticAntonio Quartulli2013-10-231-16/+25
| | | | | | | | | | some of the fields in struct batadv_neigh_node are strictly related to the B.A.T.M.A.N. IV algorithm. In order to make the struct usable by any routing algorithm it has to be split and made more generic Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: make the TT CRC logic VLAN specificAntonio Quartulli2013-10-191-8/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change allows nodes to handle the TT table on a per-VLAN basis. This is needed because nodes may have to store only some of the global entries advertised by another node. In this scenario such nodes would re-create only a partial global table and would not be able to compute a correct CRC anymore. This patch splits the logic and introduces one CRC per VLAN. In this way a node fetching only some entries belonging to some VLANs is still able to compute the needed CRCs and still check the table correctness. With this patch the shape of the TVLV-TT is changed too because now a node needs to advertise all the CRCs of all the VLANs that it is wired to. The debug output of the local Translation Table now shows the CRC along with each entry since there is not a common value for the entire table anymore. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: lock around TT operations to avoid sending inconsistent dataAntonio Quartulli2013-10-191-0/+13
| | | | | | | | | | | | | | | | | | | | A TT response may be prepared and sent while the local or global translation table is getting updated. The worst case is when one of the tables is accessed after its content has been recently updated but the metadata (TTVN/CRC) has not yet. In this case the reader will get a table content which does not match the TTVN/CRC. This will lead to an inconsistent state and so to a TT recovery. To avoid entering this situation, put a lock around those TT operations recomputing the metadata and around the TT Response creation (the latter is the only reader that accesses the metadata together with the table). Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: make the AP isolation attribute VLAN specificAntonio Quartulli2013-10-191-2/+2
| | | | | | | | | | AP isolation has to be enabled on one VLAN interface only. This patch moves the AP isolation attribute to the per-vlan interface attribute set, enabling it to have a different value depending on the selected vlan. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: add per VLAN interface attribute frameworkAntonio Quartulli2013-10-191-0/+21
| | | | | | | | | | | | | | | | | | | Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: make the Distributed ARP Table vlan awareAntonio Quartulli2013-10-191-0/+2
| | | | | | | | | | | The same IP subnet can be used on different VLANs, therefore DAT has to differentiate whether the IP to resolve belongs to one or the other virtual LAN. To accomplish this task DAT has to deal with the VLAN tag and store it together with each ARP entry. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: add the VLAN ID attribute to the TT entryAntonio Quartulli2013-10-191-0/+2
| | | | | | | | | To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: consider network coding overhead when calculating required mtuMarek Lindner2013-10-121-7/+0
| | | | | | | | | | | The module prints a warning when the MTU on the hard interface is too small to transfer payload traffic without fragmentation. The required MTU is calculated based on the encapsulation header size. If network coding is compild into the module its header size is taken into account as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: Fragment and send skbs larger than mtuMartin Hundebøll2013-10-121-0/+6
| | | | | | | | | | | Non-broadcast packets larger than MTU are fragmented and sent with an encapsulating header. Up to 16 fragments are supported, which are sent in reverse order on the wire to allow minimal memory copying when creating fragments. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: Receive fragmented packets and mergeMartin Hundebøll2013-10-121-0/+38
| | | | | | | | | | | | | Fragments arriving at their destination are buffered for later merge. Merged packets are passed to the main receive function as had they never been fragmented. Fragments are forwarded without merging if the MTU of the outgoing interface is smaller than the size of the merged packet. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: Remove old fragmentation codeMartin Hundebøll2013-10-121-19/+0
| | | | | | | | | | | | | | | | | | Remove the existing fragmentation code before adding the new version and delete unicast.{h,c}. batadv_unicast_send_skb() is moved to send.c and renamed to batadv_send_skb_unicast(). fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in the new fragmentation code. BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the new fragmentation code. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: remove vis functionalitySimon Wunderlich2013-10-091-84/+0
| | | | | | | | | This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: use CRC32C instead of CRC16 in TT codeAntonio Quartulli2013-10-091-2/+2
| | | | | | | | | | | CRC32C has to be preferred to CRC16 because of its possible HW native support and because of the reduced collision probability. With this change the Translation Table component now uses CRC32C to compute the local and global table checksum. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: tvlv - convert tt data sent within OGMsMarek Lindner2013-10-091-1/+1
| | | | | | | | | The translation table meta data (version number, crc checksum, etc) as well as the translation table diff propgated within OGMs now uses the newly introduced tvlv infrastructure. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: tvlv - add network coding containerMarek Lindner2013-10-091-0/+2
| | | | | | | | Create network coding container to announce network coding capabilities (if enabled). Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: tvlv - add distributed arp table containerMarek Lindner2013-10-091-0/+10
| | | | | | | Create DAT container to announce DAT capabilities (if enabled). Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: tvlv - gateway download/upload bandwidth containerMarek Lindner2013-10-091-4/+8
| | | | | | | | | | | | | Prior to this patch batman-adv read the advertised uplink bandwidth from userspace and compressed this information into a single byte called "gateway class". Now the download & upload bandwidth information is sent as-is. No userspace change is necessary since the sysfs API always allowed to specify a bandwidth. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: tvlv - basic infrastructureMarek Lindner2013-10-091-0/+72
| | | | | | | | | | | | | | | | | | | | | | | The goal is to provide the infrastructure for sending, receiving and parsing information 'containers' while preserving backward compatibility. TVLV (based on the commonly known Type Length Value technique) was chosen as the format for those containers. Even if a node does not know the tvlv type of a certain container it can simply skip the current container and proceed with the next. Past experience has shown features evolve over time, so a 'version' field was added right from the start to allow differentiating between feature variants - hence the name: T(ype) V(ersion) L(ength) V(alue). This patch introduces the basic TVLV infrastructure: * register / unregister tvlv containers to be sent with each OGM (on primary interfaces only) * register / unregister callback handlers to be called upon finding the corresponding tvlv type in a tvlv buffer * unicast tvlv send / receive API calls Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
* batman-adv: change VID semantic in the BLA codeAntonio Quartulli2013-05-291-2/+2
| | | | | | | | | | | | | | | In order to make batman-adv fully vlan aware later, the semantic used for variables storing the VLAN ID values has to be changed in order to be adapted to the new one which will be used batman-adv wide. In particular, the VID has to be an "_unsigned_ short int" and its 4 MSB will be used as a flag bitfield, while the remaining 12 bits are used to store the real VID value Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
* batman-adv: send each broadcast only once on non-wireless interfacesMatthias Schiffer2013-05-291-0/+2
| | | | | | | | | | | | | | While it makes sense to send each broadcast thrice on 802.11 (WLAN) interfaces as broadcasts are often unreliable on these, there is no reason to do so on other interface types. The increased the overhead can be harmful on low-bandwidth links like VPN connections over slow internet lines, therefore it is better to reduce the number of broadcast packets sent on non-wireless links to one. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: network coding - receive coded packets and decode themMartin Hundebøll2013-03-131-0/+10
| | | | | | | | | | | | When receiving a network coded packet, the decoding buffer is searched for a packet to use for decoding. The source, destination, and crc32 from the coded packet is used to identify the wanted packet. The decoded packet is passed to the usual unicast receiver function, as had it never been network coded. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: network coding - save overheard and tx packets for decodingMartin Hundebøll2013-03-131-0/+11
| | | | | | | | | | | | | | | To be able to decode a network coded packet, a node must already know one of the two coded packets. This is done by buffering skbs before transmission and buffering packets sniffed with promiscuous mode from other hosts. Packets are kept in a buffer similar to the one with forward-skbs: A hash table, where each entry, which corresponds to a src-dst pair, has a linked list packets. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: network coding - code and transmit packets if possibleMartin Hundebøll2013-03-131-0/+20
| | | | | | | | | | | | | | | | | Before adding forward-skbs to the coding buffer, the buffer is searched for a potential coding opportunity. If one is found, the two packets are network coded and transmitted right away. If not, the forward-skb is added to the buffer. Network coded packets are transmitted with information about the two receivers and the two coded packets. The first receiver is given by the MAC header, while the second is given in the payload/bat-header. The second receiver uses promiscuous mode to receive the packet and check the second destination. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: network coding - buffer unicast packets before forwardMartin Hundebøll2013-03-131-0/+49
| | | | | | | | | | | | | | | | | Two be able to network code two packets, one packet must be buffered until the next is available. This is done in a "coding buffer", which is essentially a hash table with lists of packets. Each entry in the hash table corresponds to a specific src-dst pair, which has a linked list of packets that are buffered. This patch adds skbs to the buffer just before forwarding them. The buffer is traversed every 10 ms, where timed skbs are removed from the buffer and transmitted. To allow experiments with the network coding scheme, the timeout is tunable through a file in debugfs. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: network coding - detect coding nodes and remove these after timeoutMartin Hundebøll2013-03-131-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | To use network coding efficiently, a relay must know when neighbor nodes are likely to have enough information to be able to decode a network coded packet. This is detected by using OGMs from batman-adv to discover when one neighbor is in range of another neighbor. The relay check the TLL to detect when an OGM is forwarded from one neighbor by another neighbor, and thereby knows that the two neighbors are in range and thus overhear packets sent by each other. This information is saved in the orig_node struct to be used when searching for coding opportunities. Two lists are added to the orig_node struct: One for neighbors that can hear the orig_node (outgoing nc_nodes) and one for neighbors that the orig_node can hear (incoming nc_nodes). Information about nc_nodes is kept for 10 seconds and is available through debugfs in batman_adv/nc_nodes to use when debugging network coding. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: network coding - add the initial infrastructure codeMartin Hundebøll2013-03-131-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: update copyright yearsAntonio Quartulli2013-01-191-1/+1
| | | | | Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: postpone sysfs removal when unregisteringSimon Wunderlich2013-01-191-0/+6
| | | | | | | | | | | | | | When processing the unregister notify for a hard interface, removing the sysfs files may lead to a circular deadlock (rtnl mutex <-> s_active). To overcome this problem, postpone the sysfs removal in a worker. Reported-by: Sasha Levin <sasha.levin@oracle.com> Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: kernel doc for types.hMarek Lindner2013-01-191-66/+395
| | | | | | | Thanks to Sven Eckelmann and Simon Wunderlich for their support. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: rename batadv_claim struct to make clear it is used by blaMarek Lindner2013-01-191-1/+1
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: rename batadv_backbone_gw struct to make clear it is used by blaMarek Lindner2013-01-191-2/+2
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: rename batadv_recvlist_node struct to make clear it is used by visMarek Lindner2013-01-191-1/+1
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: rename batadv_if_list_entry struct to make clear it is used by visMarek Lindner2013-01-191-9/+10
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: group tt type definitions togetherMarek Lindner2013-01-191-25/+25
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: mark debug_log struct as bat_priv only structMarek Lindner2013-01-191-12/+13
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: align kernel doc properlyMarek Lindner2013-01-191-13/+12
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: unbloat batadv_priv if debug is not enabledMarek Lindner2013-01-121-0/+4
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: remove unused variable from orig_node structMarek Lindner2013-01-121-1/+0
| | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: don't compile the BLA switch if not requestedAntonio Quartulli2013-01-121-0/+2
| | | | | | | | | | | | | When the Bridge Loop Avoidance component is not compiled-in, its boolean switch should be not compiled as well. This patch surrounds the switch with a proper ifdef. This behaviour was introduced by 9fd6b0615b5499b270d39a92b8790e206cf75833 ("batman-adv: add bridge loop avoidance compile option") Signed-off-by: Antonio Quartulli <ordex@autistici.org> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: Fix broadcast duplist for fragmentationSimon Wunderlich2012-11-211-1/+1
| | | | | | | | | | | | | If the skb is fragmented, the checksum must be computed on the individual fragments, just using skb->data may fail on fragmented data. Instead of doing linearizing the packet, use the new batadv_crc32 to do that more efficiently- it should not hurt replacing the old crc16 by the new crc32. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: substitute tt_poss_change with a per-tt_entry flagAntonio Quartulli2012-11-141-8/+0
| | | | | | | | | | | | | | | | tt_poss_change is a node-wide flag which tells whether the node is in a roaming state (a client recently moved to/away from it) in order to let it apply special re-routing rules. However this flag does not give a clear idea of the current state because it is not possible to understand *which client* is actually involved in the roaming. For this reason a better approach has been chosen: instead of using a node-wide variable, the roaming state is now given by a per-tt_entry ROAM flag which, in case of packet coming through the node, tells the node whether the real destination is in roaming state or not. With this flag change, batadv_check_unicast_ttvn() has also been rearranged in order to better fit the new re-routing logic and to be much more readable. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
OpenPOWER on IntegriCloud