summaryrefslogtreecommitdiffstats
path: root/net/ax25
Commit message (Collapse)AuthorAgeFilesLines
...
* ax25: Fix SIOCAX25GETINFO ioctlEric Dumazet2009-09-221-2/+2
| | | | | | | | | | rcv_q & snd_q initializations were reversed in commit 31e6d363abcd0d05766c82f1a9c905a4c974a199 (net: correct off-by-one write allocations reports) Signed-off-by: Jan Rafaj <jr+netfilter-devel@cedric.unob.cz> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Move rx skb_orphan call to where neededHerbert Xu2009-06-231-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | In order to get the tun driver to account packets, we need to be able to receive packets with destructors set. To be on the safe side, I added an skb_orphan call for all protocols by default since some of them (IP in particular) cannot handle receiving packets destructors properly. Now it seems that at least one protocol (CAN) expects to be able to pass skb->sk through the rx path without getting clobbered. So this patch attempts to fix this properly by moving the skb_orphan call to where it's actually needed. In particular, I've added it to skb_set_owner_[rw] which is what most users of skb->destructor call. This is actually an improvement for tun too since it means that we only give back the amount charged to the socket when the skb is passed to another socket that will also be charged accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Oliver Hartkopp <olver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: correct off-by-one write allocations reportsEric Dumazet2009-06-181-5/+6
| | | | | | | | | | | | | commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. We need to take into account this offset when reporting sk_wmem_alloc to user, in PROC_FS files or various ioctls (SIOCOUTQ/TIOCOUTQ) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sk_wmem_alloc has initial value of one, not zeroEric Dumazet2009-06-171-2/+1
| | | | | | | | | | | | | | | | | | | | commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. Some protocols check sk_wmem_alloc value to determine if a timer must delay socket deallocation. We must take care of the sk_wmem_alloc value being one instead of zero when no write allocations are pending. Reported by Ingo Molnar, and full diagnostic from David Miller. This patch introduces three helpers to get read/write allocations and a followup patch will use these helpers to report correct write allocations to user. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: proc uid file misses headerAlan Cox2009-04-201-3/+9
| | | | | | | | | | | This has been broken for a while. I happened to catch it testing because one app "knew" that the top line of the calls data was the policy line and got confused. Put the header back. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "ax25: zero length frame filtering in AX25"David S. Miller2009-03-271-12/+0
| | | | | | | | | This reverts commit f99bcff7a290768e035f3d4726e103c6ebe858bf. Like netrom, Alan Cox says that zero lengths have real meaning and are useful in this protocol. Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: zero length frame filtering in AX25Bernard Pidoux2009-03-211-0/+12
| | | | | | | | | | In previous commit 244f46ae6e9e18f6fc0be7d1f49febde4762c34b was introduced a zero length frame filter for ROSE protocole. This patch has the same purpose at AX25 frame level for the same reason. Empty frames have no meaning in AX25 protocole. Signed-off-by: Bernard Pidoux <f6bvp@amsat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: SOCK_DEBUG message simplificationBernard Pidoux2009-03-211-3/+1
| | | | | | | This patch condenses two debug messages in one. Signed-off-by: Bernard Pidoux <f6bvp@amsat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert usage of packet_type to read_mostlyStephen Hemminger2009-03-101-2/+1
| | | | | | | | Protocols that use packet_type can be __read_mostly section for better locality. Elminate any unnecessary initializations of NULL. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: more common return path joiningIlpo Järvinen2009-02-061-8/+5
| | | | | | Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: replace uses of __constant_{endian}Harvey Harrison2009-02-011-1/+1
| | | | | | | Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2008-12-282-54/+45
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
| * ax25: join the return paths that free skbIlpo Järvinen2008-12-141-26/+15
| | | | | | | | | | Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ax25: fix warning in net/ax25/sysctl_net_ax25.cIngo Molnar2008-11-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | fix this warning: net/ax25/sysctl_net_ax25.c:27: warning: ‘min_ds_timeout’ defined but not used net/ax25/sysctl_net_ax25.c:27: warning: ‘max_ds_timeout’ defined but not used These are only used in the CONFIG_AX25_DAMA_SLAVE case. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: '&' reduxAlexey Dobriyan2008-11-031-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | I want to compile out proc_* and sysctl_* handlers totally and stub them to NULL depending on config options, however usage of & will prevent this, since taking adress of NULL pointer will break compilation. So, drop & in front of every ->proc_handler and every ->strategy handler, it was never needed in fact. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | CRED: Wrap task credential accesses in the AX25 protocolDavid Howells2008-11-142-2/+2
|/ | | | | | | | | | | | | | | | | | Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
* ax25: Quick fix for making sure unaccepted sockets get destroyed.David S. Miller2008-10-061-0/+3
| | | | | | | | | | Since we reverted 30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74 ("ax25: Fix std timer socket destroy handling.") we have to put some kind of fix in to cure the issue whereby unaccepted connections do not get destroyed. The approach used here is from Tihomir Heidelberg - 9a4gl Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "ax25: Fix std timer socket destroy handling."David S. Miller2008-10-061-3/+5
| | | | | | | | | This reverts commit 30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74. It causes all kinds of problems, based upon a report by Bernard (f6bvp) and analysis by Jarek Poplawski. Signed-off-by: David S. Miller <davem@davemloft.net>
* AX.25: Fix sysctl registration if !CONFIG_AX25_DAMA_SLAVERalf Baechle2008-08-051-10/+4
| | | | | | | | | | | | Since 49ffcf8f99e8d33ec8afb450956804af518fd788 ("sysctl: update sysctl_check_table") setting struct ctl_table.procname = NULL does no longer work as it used to the way the AX.25 code is expecting it to resulting in the AX.25 sysctl registration code to break if CONFIG_AX25_DAMA_SLAVE was not set as in some distribution kernels. Kernel releases from 2.6.24 are affected. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* netns: Use net_eq() to compare net-namespaces for optimization.YOSHIFUJI Hideaki2008-07-192-2/+2
| | | | | | | | Without CONFIG_NET_NS, namespace is always &init_net. Compiler will be able to omit namespace comparisons with this patch. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: Fix std timer socket destroy handling.David S. Miller2008-06-171-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tihomir Heidelberg - 9a4gl, reports: -------------------- I would like to direct you attention to one problem existing in ax.25 kernel since 2.4. If listening socket is closed and its SKB queue is released but those sockets get weird. Those "unAccepted()" sockets should be destroyed in ax25_std_heartbeat_expiry, but it will not happen. And there is also a note about that in ax25_std_timer.c: /* Magic here: If we listen() and a new link dies before it is accepted() it isn't 'dead' so doesn't get removed. */ This issue cause ax25d to stop accepting new connections and I had to restarted ax25d approximately each day and my services were unavailable. Also netstat -n -l shows invalid source and device for those listening sockets. It is strange why ax25d's listening socket get weird because of this issue, but definitely when I solved this bug I do not have problems with ax25d anymore and my ax25d can run for months without problems. -------------------- Actually as far as I can see, this problem is even in releases as far back as 2.2.x as well. It seems senseless to special case this test on TCP_LISTEN state. Anything still stuck in state 0 has no external references and we can just simply kill it off directly. Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: Use sock_graft() and remove bogus sk_socket and sk_sleep init.David S. Miller2008-06-171-5/+1
| | | | | | | | | | | | | | | | | | | | | | | The way that listening sockets work in ax25 is that the packet input code path creates new socks via ax25_make_new() and attaches them to the incoming SKB. This SKB gets queued up into the listening socket's receive queue. When accept()'d the sock gets hooked up to the real parent socket. Alternatively, if the listening socket is closed and released, any unborn socks stuff up in the receive queue get released. So during this time period these sockets are unreachable in any other way, so no wakeup events nor references to their ->sk_socket and ->sk_sleep members can occur. And even if they do, all such paths have to make NULL checks. So do not deceptively initialize them in ax25_make_new() to the values in the listening socket. Leave them at NULL. Finally, use sock_graft() in ax25_accept(). Signed-off-by: David S. Miller <davem@davemloft.net>
* ax25: Fix NULL pointer dereference and lockup.Jarek Poplawski2008-06-031-8/+3
| | | | | | | | | | | | | | From: Jarek Poplawski <jarkao2@gmail.com> There is only one function in AX25 calling skb_append(), and it really looks suspicious: appends skb after previously enqueued one, but in the meantime this previous skb could be removed from the queue. This patch Fixes it the simple way, so this is not fully compatible with the current method, but testing hasn't shown any problems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-04-141-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
| * [AX25]: Potential ax25_uid_assoc-s leaks on module unload.Pavel Emelyanov2008-04-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The ax25_uid_free call walks the ax25_uid_list and releases entries from it. The problem is that after the fisrt call to hlist_del_init the hlist_for_each_entry (which hides behind the ax25_uid_for_each) will consider the current position to be the last and will return. Thus, the whole list will be left not freed. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2008-03-271-4/+0
|\ \ | |/ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/rndis_host.c drivers/net/wireless/b43/dma.c net/ipv6/ndisc.c
| * [AX25]: Remove obsolete references to BKL from TODO file.Robert P. J. Day2008-03-261-4/+0
| | | | | | | | | | | | | | | | | | Given that there are no apparent calls to lock_kernel() or unlock_kernel() under net/ax25, delete the TODO reference related to that. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.YOSHIFUJI Hideaki2008-03-261-1/+1
| | | | | | | | | | | | | | | | | | Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* | [NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki2008-03-262-2/+2
|/ | | | | | | | Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [AX25] ax25_out: check skb for NULL in ax25_kick()Jarek Poplawski2008-02-171-2/+11
| | | | | | | | | | | | | According to some OOPS reports ax25_kick tries to clone NULL skbs sometimes. It looks like a race with ax25_clear_queues(). Probably there is no need to add more than a simple check for this yet. Another report suggested there are probably also cases where ax25 ->paclen == 0 can happen in ax25_output(); this wasn't confirmed during testing but let's leave this debugging check for some time. Reported-and-tested-by: Jann Traschewski <jann@gmx.de> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25] ax25_ds_timer: use mod_timer instead of add_timerJarek Poplawski2008-02-122-9/+5
| | | | | | | | | | This patch changes current use of: init_timer(), add_timer() and del_timer() to setup_timer() with mod_timer(), which should be safer anyway. Reported-by: Jann Traschewski <jann@gmx.de> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25] ax25_timer: use mod_timer instead of add_timerJarek Poplawski2008-02-122-44/+22
| | | | | | | | | | | | | According to one of Jann's OOPS reports it looks like BUG_ON(timer_pending(timer)) triggers during add_timer() in ax25_start_t1timer(). This patch changes current use of: init_timer(), add_timer() and del_timer() to setup_timer() with mod_timer(), which should be safer anyway. Reported-by: Jann Traschewski <jann@gmx.de> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25] ax25_route: make ax25_route_lock BH safeJarek Poplawski2008-02-121-14/+14
| | | | | | | | | | | | | | | | | | | | | > ================================= > [ INFO: inconsistent lock state ] > 2.6.24-dg8ngn-p02 #1 > --------------------------------- > inconsistent {softirq-on-W} -> {in-softirq-R} usage. > linuxnet/3046 [HC0[0]:SC1[2]:HE1:SE0] takes: > (ax25_route_lock){--.+}, at: [<f8a0cfb7>] ax25_get_route+0x18/0xb7 [ax25] > {softirq-on-W} state was registered at: ... This lockdep report shows that ax25_route_lock is taken for reading in softirq context, and for writing in process context with BHs enabled. So, to make this safe, all write_locks in ax25_route.c are changed to _bh versions. Reported-by: Jann Traschewski <jann@gmx.de>, Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25] af_ax25: remove sock lock in ax25_info_show()Jarek Poplawski2008-02-121-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This lockdep warning: > ======================================================= > [ INFO: possible circular locking dependency detected ] > 2.6.24 #3 > ------------------------------------------------------- > swapper/0 is trying to acquire lock: > (ax25_list_lock){-+..}, at: [<f91dd3b1>] ax25_destroy_socket+0x171/0x1f0 [ax25] > > but task is already holding lock: > (slock-AF_AX25){-+..}, at: [<f91dbabc>] ax25_std_heartbeat_expiry+0x1c/0xe0 [ax25] > > which lock already depends on the new lock. ... shows that ax25_list_lock and slock-AF_AX25 are taken in different order: ax25_info_show() takes slock (bh_lock_sock(ax25->sk)) while ax25_list_lock is held, so reversely to other functions. To fix this the sock lock should be moved to ax25_info_start(), and there would be still problem with breaking ax25_list_lock (it seems this "proper" order isn't optimal yet). But, since it's only for reading proc info it seems this is not necessary (e.g. ax25_send_to_raw() does similar reading without this lock too). So, this patch removes sock lock to avoid deadlock possibility; there is also used sock_i_ino() function, which reads sk_socket under proper read lock. Additionally printf format of this i_ino is changed to %lu. Reported-by: Bernard Pidoux F6BVP <f6bvp@free.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25]: Kill ax25_bind() user triggable printk.maximilian attems2008-01-311-8/+5
| | | | | | | | on the last run overlooked that sfuzz triggable message. move the message to the corresponding comment. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25]: sparse cleanupsEric Dumazet2008-01-285-6/+12
| | | | | | | | | | | | | | | | | | | | | | | net/ax25/ax25_route.c:251:13: warning: context imbalance in 'ax25_rt_seq_start' - wrong count at exit net/ax25/ax25_route.c:276:13: warning: context imbalance in 'ax25_rt_seq_stop' - unexpected unlock net/ax25/ax25_std_timer.c:65:25: warning: expensive signed divide net/ax25/ax25_uid.c:46:1: warning: symbol 'ax25_uid_list' was not declared. Should it be static? net/ax25/ax25_uid.c:146:13: warning: context imbalance in 'ax25_uid_seq_start' - wrong count at exit net/ax25/ax25_uid.c:169:13: warning: context imbalance in 'ax25_uid_seq_stop' - unexpected unlock net/ax25/af_ax25.c:573:28: warning: expensive signed divide net/ax25/af_ax25.c:1865:13: warning: context imbalance in 'ax25_info_start' - wrong count at exit net/ax25/af_ax25.c:1888:13: warning: context imbalance in 'ax25_info_stop' - unexpected unlock net/ax25/ax25_ds_timer.c:133:25: warning: expensive signed divide Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25]: Switch to using ctl_paths.Pavel Emelyanov2008-01-281-22/+5
| | | | | | | | | | This one is almost the same as the hunks in the first patch, but ax25 tables are created dynamically. So this patch differs a bit to handle this case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Convert init_timer into setup_timerPavel Emelyanov2008-01-281-3/+2
| | | | | | | | | | | | | Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25] af_ax25: Possible circular locking.Jarek Poplawski2008-01-101-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bernard Pidoux F6BVP reported: > When I killall kissattach I can see the following message. > > This happens on kernel 2.6.24-rc5 already patched with the 6 previously > patches I sent recently. > > > ======================================================= > [ INFO: possible circular locking dependency detected ] > 2.6.23.9 #1 > ------------------------------------------------------- > kissattach/2906 is trying to acquire lock: > (linkfail_lock){-+..}, at: [<d8bd4603>] ax25_link_failed+0x11/0x39 [ax25] > > but task is already holding lock: > (ax25_list_lock){-+..}, at: [<d8bd7c7c>] ax25_device_event+0x38/0x84 > [ax25] > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: ... lockdep is worried about the different order here: #1 (rose_neigh_list_lock){-+..}: #3 (ax25_list_lock){-+..}: #0 (linkfail_lock){-+..}: #1 (rose_neigh_list_lock){-+..}: #3 (ax25_list_lock){-+..}: #0 (linkfail_lock){-+..}: So, ax25_list_lock could be taken before and after linkfail_lock. I don't know if this three-thread clutch is very probable (or possible at all), but it seems another bug reported by Bernard ("[...] system impossible to reboot with linux-2.6.24-rc5") could have similar source - namely ax25_list_lock held by ax25_kill_by_device() during ax25_disconnect(). It looks like the only place which calls ax25_disconnect() this way, so I guess, it isn't necessary. This patch is breaking the lock for ax25_disconnect(). Reported-and-tested-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25]: Kill user triggable printks.maximilian attems2008-01-101-21/+18
| | | | | | | | | | | sfuzz can easily trigger any of those. move the printk message to the corresponding comment: makes the intention of the code clear and easy to pick up on an scheduled removal. as bonus simplify the braces placement. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Correct two mistaken skb_reset_mac_header() conversions.David S. Miller2007-12-201-1/+1
| | | | | | | | | | | | | | This operation helper abstracts: skb->mac_header = skb->data; but it was done in two more places which were actually: skb->mac_header = skb->network_header; and those are corrected here. Signed-off-by: David S. Miller <davem@davemloft.net>
* [AX25]: Locking dependencies fix in ax25_disconnect().Jarek Poplawski2007-12-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bernard Pidoux reported these lockdep warnings: [ INFO: possible irq lock inversion dependency detected ] 2.6.23.1 #1 --------------------------------------------------------- fpac/4933 just changed the state of lock: (slock-AF_AX25){--..}, at: [<d8be3312>] ax25_disconnect+0x46/0xaf [ax25] but this lock was taken by another, soft-irq-safe lock in the past: (ax25_list_lock){-+..} and interrupts could create inverse lock ordering between them. [...] [ INFO: inconsistent lock state ] 2.6.23.1 #1 --------------------------------- inconsistent {in-softirq-W} -> {softirq-on-W} usage. ax25_call/4005 [HC0[0]:SC0[0]:HE1:SE1] takes: (slock-AF_AX25){-+..}, at: [<d8b79312>] ax25_disconnect+0x46/0xaf [ax25] [...] This means slock-AF_AX25 could be taken both from softirq and process context with softirqs enabled, so it's endangered itself, but also makes ax25_list_lock vulnerable. It was not 100% verified if the real lockup can happen, but this fix isn't very costly and looks safe anyway. (It was tested by Bernard with 2.6.23.9 and 2.6.24-rc5 kernels.) Reported_by: Bernard Pidoux <pidoux@ccr.jussieu.fr> Tested_by: Bernard Pidoux <pidoux@ccr.jussieu.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Forget the zero_it argument of sk_alloc()Pavel Emelyanov2007-11-011-2/+4
| | | | | | | | | | | | | | | Finally, the zero_it argument can be completely removed from the callers and from the function prototype. Besides, fix the checkpatch.pl warnings about using the assignments inside if-s. This patch is rather big, and it is a part of the previous one. I splitted it wishing to make the patches more readable. Hope this particular split helped. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Convert files to UTF-8 and some cleanupsJan Engelhardt2007-10-192-2/+2
| | | | | | | | | | | | | | | | | | * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* [NET]: Move hardware header operations out of netdevice.Stephen Hemminger2007-10-101-2/+13
| | | | | | | | | Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Make the device list and device lookups per namespace.Eric W. Biederman2007-10-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Make device event notification network namespace safeEric W. Biederman2007-10-101-0/+3
| | | | | | | | | | | | | | | | | | Every user of the network device notifiers is either a protocol stack or a pseudo device. If a protocol stack that does not have support for multiple network namespaces receives an event for a device that is not in the initial network namespace it quite possibly can get confused and do the wrong thing. To avoid problems until all of the protocol stacks are converted this patch modifies all netdev event handlers to ignore events on devices that are not in the initial network namespace. As the rest of the code is made network namespace aware these checks can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Make packet reception network namespace safeEric W. Biederman2007-10-101-0/+5
| | | | | | | | | | | | | | This patch modifies every packet receive function registered with dev_add_pack() to drop packets if they are not from the initial network namespace. This should ensure that the various network stacks do not receive packets in a anything but the initial network namespace until the code has been converted and is ready for them. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Make socket creation namespace safe.Eric W. Biederman2007-10-101-3/+6
| | | | | | | | | | | | | | | | | | | | | | | This patch passes in the namespace a new socket should be created in and has the socket code do the appropriate reference counting. By virtue of this all socket create methods are touched. In addition the socket create methods are modified so that they will fail if you attempt to create a socket in a non-default network namespace. Failing if we attempt to create a socket outside of the default network namespace ensures that as we incrementally make the network stack network namespace aware we will not export functionality that someone has not audited and made certain is network namespace safe. Allowing us to partially enable network namespaces before all of the exotic protocols are supported. Any protocol layers I have missed will fail to compile because I now pass an extra parameter into the socket creation code. [ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Make /proc/net per network namespaceEric W. Biederman2007-10-101-6/+7
| | | | | | | | | | | | | | | | | | This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud