summaryrefslogtreecommitdiffstats
path: root/lib
Commit message (Collapse)AuthorAgeFilesLines
* idr: fix invalid ptr dereference on item deleteMatthew Wilcox2018-05-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the radix tree underlying the IDR happens to be full and we attempt to remove an id which is larger than any id in the IDR, we will call __radix_tree_delete() with an uninitialised 'slot' pointer, at which point anything could happen. This was easiest to hit with a single entry at id 0 and attempting to remove a non-0 id, but it could have happened with 64 entries and attempting to remove an id >= 64. Roman said: The syzcaller test boils down to opening /dev/kvm, creating an eventfd, and calling a couple of KVM ioctls. None of this requires superuser. And the result is dereferencing an uninitialized pointer which is likely a crash. The specific path caught by syzbot is via KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are other user-triggerable paths, so cc:stable is probably justified. Matthew added: We have around 250 calls to idr_remove() in the kernel today. Many of them pass an ID which is embedded in the object they're removing, so they're safe. Picking a few likely candidates: drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl. drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar drivers/atm/nicstar.c could be taken down by a handcrafted packet Link: http://lkml.kernel.org/r/20180518175025.GD6361@bombadil.infradead.org Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree") Reported-by: <syzbot+35666cba7f0a337e2e79@syzkaller.appspotmail.com> Debugged-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2018-05-211-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull vfs fixes from Al Viro: "Assorted fixes all over the place" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: fix io_destroy(2) vs. lookup_ioctx() race ext2: fix a block leak nfsd: vfs_mkdir() might succeed leaving dentry negative unhashed cachefiles: vfs_mkdir() might succeed leaving dentry negative unhashed unfuck sysfs_mount() kernfs: deal with kernfs_fill_super() failures cramfs: Fix IS_ENABLED typo befs_lookup(): use d_splice_alias() affs_lookup: switch to d_splice_alias() affs_lookup(): close a race with affs_remove_link() fix breakage caused by d_find_alias() semantics change fs: don't scan the inode cache before SB_BORN is set do d_instantiate/unlock_new_inode combinations safely iov_iter: fix memory leak in pipe_get_pages_alloc() iov_iter: fix return type of __pipe_get_pages()
| * iov_iter: fix memory leak in pipe_get_pages_alloc()Ilya Dryomov2018-05-021-1/+1
| | | | | | | | | | | | | | | | Make n signed to avoid leaking the pages array if __pipe_get_pages() fails to allocate any pages. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * iov_iter: fix return type of __pipe_get_pages()Ilya Dryomov2018-05-021-1/+1
| | | | | | | | | | | | | | | | It returns -EFAULT and happens to be a helper for pipe_get_pages() whose return type is ssize_t. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | radix tree: fix multi-order iteration raceRoss Zwisler2018-05-181-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a race in the multi-order iteration code which causes the kernel to hit a GP fault. This was first seen with a production v4.15 based kernel (4.15.6-300.fc27.x86_64) utilizing a DAX workload which used order 9 PMD DAX entries. The race has to do with how we tear down multi-order sibling entries when we are removing an item from the tree. Remember for example that an order 2 entry looks like this: struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling] where 'entry' is in some slot in the struct radix_tree_node, and the three slots following 'entry' contain sibling pointers which point back to 'entry.' When we delete 'entry' from the tree, we call : radix_tree_delete() radix_tree_delete_item() __radix_tree_delete() replace_slot() replace_slot() first removes the siblings in order from the first to the last, then at then replaces 'entry' with NULL. This means that for a brief period of time we end up with one or more of the siblings removed, so: struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling] This causes an issue if you have a reader iterating over the slots in the tree via radix_tree_for_each_slot() while only under rcu_read_lock()/rcu_read_unlock() protection. This is a common case in mm/filemap.c. The issue is that when __radix_tree_next_slot() => skip_siblings() tries to skip over the sibling entries in the slots, it currently does so with an exact match on the slot directly preceding our current slot. Normally this works: V preceding slot struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling] ^ current slot This lets you find the first sibling, and you skip them all in order. But in the case where one of the siblings is NULL, that slot is skipped and then our sibling detection is interrupted: V preceding slot struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling] ^ current slot This means that the sibling pointers aren't recognized since they point all the way back to 'entry', so we think that they are normal internal radix tree pointers. This causes us to think we need to walk down to a struct radix_tree_node starting at the address of 'entry'. In a real running kernel this will crash the thread with a GP fault when you try and dereference the slots in your broken node starting at 'entry'. We fix this race by fixing the way that skip_siblings() detects sibling nodes. Instead of testing against the preceding slot we instead look for siblings via is_sibling_entry() which compares against the position of the struct radix_tree_node.slots[] array. This ensures that sibling entries are properly identified, even if they are no longer contiguous with the 'entry' they point to. Link: http://lkml.kernel.org/r/20180503192430.7582-6-ross.zwisler@linux.intel.com Fixes: 148deab223b2 ("radix-tree: improve multiorder iterators") Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: CR, Sapthagirish <sapthagirish.cr@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | lib/test_bitmap.c: fix bitmap optimisation tests to report errors correctlyMatthew Wilcox2018-05-181-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I had neglected to increment the error counter when the tests failed, which made the tests noisy when they fail, but not actually return an error code. Link: http://lkml.kernel.org/r/20180509114328.9887-1-mpe@ellerman.id.au Fixes: 3cc78125a081 ("lib/test_bitmap.c: add optimisation tests") Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | vsprintf: Replace memory barrier with static_key for random_ptr_key updateSteven Rostedt (VMware)2018-05-161-11/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reviewing Tobin's patches for getting pointers out early before entropy has been established, I noticed that there's a lone smp_mb() in the code. As with most lone memory barriers, this one appears to be incorrectly used. We currently basically have this: get_random_bytes(&ptr_key, sizeof(ptr_key)); /* * have_filled_random_ptr_key==true is dependent on get_random_bytes(). * ptr_to_id() needs to see have_filled_random_ptr_key==true * after get_random_bytes() returns. */ smp_mb(); WRITE_ONCE(have_filled_random_ptr_key, true); And later we have: if (unlikely(!have_filled_random_ptr_key)) return string(buf, end, "(ptrval)", spec); /* Missing memory barrier here. */ hashval = (unsigned long)siphash_1u64((u64)ptr, &ptr_key); As the CPU can perform speculative loads, we could have a situation with the following: CPU0 CPU1 ---- ---- load ptr_key = 0 store ptr_key = random smp_mb() store have_filled_random_ptr_key load have_filled_random_ptr_key = true BAD BAD BAD! (you're so bad!) Because nothing prevents CPU1 from loading ptr_key before loading have_filled_random_ptr_key. But this race is very unlikely, but we can't keep an incorrect smp_mb() in place. Instead, replace the have_filled_random_ptr_key with a static_branch not_filled_random_ptr_key, that is initialized to true and changed to false when we get enough entropy. If the update happens in early boot, the static_key is updated immediately, otherwise it will have to wait till entropy is filled and this happens in an interrupt handler which can't enable a static_key, as that requires a preemptible context. In that case, a work_queue is used to enable it, as entropy already took too long to establish in the first place waiting a little more shouldn't hurt anything. The benefit of using the static key is that the unlikely branch in vsprintf() now becomes a nop. Link: http://lkml.kernel.org/r/20180515100558.21df515e@gandalf.local.home Cc: stable@vger.kernel.org Fixes: ad67b74d2469d ("printk: hash addresses printed with %p") Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
* | Merge tag 'dma-mapping-4.17-5' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2018-05-131-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | Pull dma-mapping fix from Christoph Hellwig: "Just one little fix from Jean to avoid a harmless but very annoying warning, especially for the drm code" * tag 'dma-mapping-4.17-5' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: silent unwanted warning "buffer is full"
| * | swiotlb: silent unwanted warning "buffer is full"Jean Delvare2018-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If DMA_ATTR_NO_WARN is passed to swiotlb_alloc_buffer(), it should be passed further down to swiotlb_tbl_map_single(). Otherwise we escape half of the warnings but still log the other half. This is one of the multiple causes of spurious warnings reported at: https://bugs.freedesktop.org/show_bug.cgi?id=104082 Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 0176adb00406 ("swiotlb: refactor coherent buffer allocation") Cc: Christoph Hellwig <hch@lst.de> Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Takashi Iwai <tiwai@suse.de> Cc: stable@vger.kernel.org # v4.16
* | | lib/find_bit_benchmark.c: avoid soft lockup in test_find_first_bit()Yury Norov2018-05-111-1/+6
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | test_find_first_bit() is intentionally sub-optimal, and may cause soft lockup due to long time of run on some systems. So decrease length of bitmap to traverse to avoid lockup. With the change below, time of test execution doesn't exceed 0.2 seconds on my testing system. Link: http://lkml.kernel.org/r/20180420171949.15710-1-ynorov@caviumnetworks.com Fixes: 4441fca0a27f5 ("lib: test module for find_*_bit() functions") Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | swiotlb: fix inversed DMA_ATTR_NO_WARN testMichel Dänzer2018-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The result was printing the warning only when we were explicitly asked not to. Cc: stable@vger.kernel.org Fixes: 0176adb004065d6815a8e67946752df4cd947c5b "swiotlb: refactor coherent buffer allocation" Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Signed-off-by: Christoph Hellwig <hch@lst.de>
* | Merge tag 'errseq-v4.17' of ↵Linus Torvalds2018-04-301-14/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull errseq infrastructure fix from Jeff Layton: "The PostgreSQL developers recently had a spirited discussion about the writeback error handling in Linux, and reached out to us about a behavoir change to the code that bit them when the errseq_t changes were merged. When we changed to using errseq_t for tracking writeback errors, we lost the ability for an application to see a writeback error that occurred before the open on which the fsync was issued. This was problematic for PostgreSQL which offloads fsync calls to a completely separate process from the DB writers. This patch restores that ability. If the errseq_t value in the inode does not have the SEEN flag set, then we just return 0 for the sample. That ensures that any recorded error is always delivered at least once. Note that we might still lose the error if the inode gets evicted from the cache before anything can reopen it, but that was the case before errseq_t was merged. At LSF/MM we had some discussion about keeping inodes with unreported writeback errors around in the cache for longer (possibly indefinitely), but that's really a separate problem" * tag 'errseq-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: errseq: Always report a writeback error once
| * | errseq: Always report a writeback error onceMatthew Wilcox2018-04-271-14/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The errseq_t infrastructure assumes that errors which occurred before the file descriptor was opened are of no interest to the application. This turns out to be a regression for some applications, notably Postgres. Before errseq_t, a writeback error would be reported exactly once (as long as the inode remained in memory), so Postgres could open a file, call fsync() and find out whether there had been a writeback error on that file from another process. This patch changes the errseq infrastructure to report errors to all file descriptors which are opened after the error occurred, but before it was reported to any file descriptor. This restores the user-visible behaviour. Cc: stable@vger.kernel.org Fixes: 5660e13d2fd6 ("fs: new infrastructure for writeback error handling and reporting") Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
* | | Merge tag 'driver-core-4.17-rc3' of ↵Linus Torvalds2018-04-271-6/+5
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are some small driver core and firmware fixes for 4.17-rc3 There's a kobject WARN() removal to make syzkaller a lot happier about some "normal" error paths that it keeps hitting, which should reduce the number of false-positives we have been getting recently. There's also some fimware test and documentation fixes, and the coredump() function signature change that needed to happen after -rc1 before drivers started to take advantage of it. All of these have been in linux-next with no reported issues" * tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: some documentation fixes selftests:firmware: fixes a call to a wrong function name kobject: don't use WARN for registration failures firmware: Fix firmware documentation for recent file renames test_firmware: fix setting old custom fw path back on exit, second try test_firmware: Install all scripts drivers: change struct device_driver::coredump() return type to void
| * | kobject: don't use WARN for registration failuresDmitry Vyukov2018-04-231-6/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | This WARNING proved to be noisy. The function still returns an error and callers should handle it. That's how most of kernel code works. Downgrade the WARNING to pr_err() and leave WARNINGs for kernel bugs. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+209c0f67f99fec8eb14b@syzkaller.appspotmail.com Reported-by: syzbot+7fb6d9525a4528104e05@syzkaller.appspotmail.com Reported-by: syzbot+2e63711063e2d8f9ea27@syzkaller.appspotmail.com Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | dma-direct: don't retry allocation for no-op GFP_DMATakashi Iwai2018-04-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | When an allocation with lower dma_coherent mask fails, dma_direct_alloc() retries the allocation with GFP_DMA. But, this is useless for architectures that hav no ZONE_DMA. Fix it by adding the check of CONFIG_ZONE_DMA before retrying the allocation. Fixes: 95f183916d4b ("dma-direct: retry allocations using GFP_DMA for small masks") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2018-04-201-17/+23
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Unbalanced refcounting in TIPC, from Jon Maloy. 2) Only allow TCP_MD5SIG to be set on sockets in close or listen state. Once the connection is established it makes no sense to change this. From Eric Dumazet. 3) Missing attribute validation in neigh_dump_table(), also from Eric Dumazet. 4) Fix address comparisons in SCTP, from Xin Long. 5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller. 6) Fix tunnel refcounting in l2tp, from Guillaume Nault. 7) Fix double list insert in team driver, from Paolo Abeni. 8) af_vsock.ko module was accidently made unremovable, from Stefan Hajnoczi. 9) Fix reference to freed llc_sap object in llc stack, from Cong Wang. 10) Don't assume netdevice struct is DMA'able memory in virtio_net driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) net/smc: fix shutdown in state SMC_LISTEN bnxt_en: Fix memory fault in bnxt_ethtool_init() virtio_net: sparse annotation fix virtio_net: fix adding vids on big-endian virtio_net: split out ctrl buffer net: hns: Avoid action name truncation docs: ip-sysctl.txt: fix name of some ipv6 variables vmxnet3: fix incorrect dereference when rxvlan is disabled llc: hold llc_sap before release_sock() MAINTAINERS: Direct networking documentation changes to netdev atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit" net: qmi_wwan: add Wistron Neweb D19Q1 net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN" net: stmmac: Disable ACS Feature for GMAC >= 4 net: mvpp2: Fix DMA address mask size net: change the comment of dev_mc_init net: qualcomm: rmnet: Fix warning seen with fill_info tun: fix vlan packet truncation tipc: fix infinite loop when dumping link monitor summary tipc: fix use-after-free in tipc_nametbl_stop ...
| * textsearch: fix kernel-doc warnings and add kernel-api sectionRandy Dunlap2018-04-161-17/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | Make lib/textsearch.c usable as kernel-doc. Add textsearch() function family to kernel-api documentation. Fix kernel-doc warnings in <linux/textsearch.h>: ../include/linux/textsearch.h:65: warning: Incorrect use of kernel-doc format: * get_next_block - fetch next block of data ../include/linux/textsearch.h:82: warning: Incorrect use of kernel-doc format: * finish - finalize/clean a series of get_next_block() calls Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2018-04-151-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes and updates for x86: - Address a swiotlb regression which was caused by the recent DMA rework and made driver fail because dma_direct_supported() returned false - Fix a signedness bug in the APIC ID validation which caused invalid APIC IDs to be detected as valid thereby bloating the CPU possible space. - Fix inconsisten config dependcy/select magic for the MFD_CS5535 driver. - Fix a corruption of the physical address space bits when encryption has reduced the address space and late cpuinfo updates overwrite the reduced bit information with the original value. - Dominiks syscall rework which consolidates the architecture specific syscall functions so all syscalls can be wrapped with the same macros. This allows to switch x86/64 to struct pt_regs based syscalls. Extend the clearing of user space controlled registers in the entry patch to the lower registers" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix signedness bug in APIC ID validity checks x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption x86/olpc: Fix inconsistent MFD_CS5535 configuration swiotlb: Use dma_direct_supported() for swiotlb_ops syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention syscalls/core, syscalls/x86: Clean up syscall stub naming convention syscalls/x86: Extend register clearing on syscall entry to lower registers syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64 syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y x86/syscalls: Don't pointlessly reload the system call number x86/mm: Fix documentation of module mapping range with 4-level paging x86/cpuid: Switch to 'static const' specifier
| * \ Merge branch 'WIP.x86/asm' into x86/urgent, because the topic is readyIngo Molnar2018-04-1217-306/+378
| |\ \ | | | | | | | | | | | | Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | swiotlb: Use dma_direct_supported() for swiotlb_opsChristoph Hellwig2018-04-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | swiotlb_alloc() calls dma_direct_alloc(), which can satisfy lower than 32-bit DMA mask requests using GFP_DMA if the architecture supports it. Various x86 drivers rely on that, so we need to support that. At the same time the whole kernel expects a 32-bit DMA mask to just work, so the other magic in swiotlb_dma_supported() isn't actually needed either. Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: iommu@lists.linux-foundation.org Fixes: 6e4bf5867783 ("x86/dma: Use generic swiotlb_ops") Link: http://lkml.kernel.org/r/20180409091517.6619-2-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | | kernel/kexec_file.c: move purgatories sha256 to common codePhilipp Rudo2018-04-131-0/+283
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code to verify the new kernels sha digest is applicable for all architectures. Move it to common code. One problem is the string.c implementation on x86. Currently sha256 includes x86/boot/string.h which defines memcpy and memset to be gcc builtins. By moving the sha256 implementation to common code and changing the include to linux/string.h both functions are no longer defined. Thus definitions have to be provided in x86/purgatory/string.c Link: http://lkml.kernel.org/r/20180321112751.22196-12-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge tag 'gfs2-4.17.fixes2' of ↵Linus Torvalds2018-04-121-0/+28
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull more gfs2 updates from Bob Peterson: "We decided to request the latest three patches to be merged into this merge window while it's still open. - The first patch adds a new function to lockref: lockref_put_not_zero - The second patch fixes GFS2's glock dump code so it uses the new lockref function. This fixes a problem whereby lock dumps could miss glocks. - I made a minor patch to update some comments and fix the lock ordering text in our gfs2-glocks.txt Documentation file" * tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Minor improvements to comments and documentation gfs2: Stop using rhashtable_walk_peek lockref: Add lockref_put_not_zero
| * | | lockref: Add lockref_put_not_zeroAndreas Gruenbacher2018-04-121-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Put a lockref unless the lockref is dead or its count would become zero. This is the same as lockref_put_or_lock except that the lock is never left held. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
* | | | Merge tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2018-04-121-1/+1
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | Pull dma-mapping fix from Christoph Hellwig: "Fix for one swiotlb regression in 2.16 from Takashi" * tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix unexpected swiotlb_alloc_coherent failures
| * | | swiotlb: fix unexpected swiotlb_alloc_coherent failuresTakashi Iwai2018-04-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code refactoring by commit 0176adb00406 ("swiotlb: refactor coherent buffer allocation") made swiotlb_alloc_buffer almost always failing due to a thinko: namely, the function evaluates the dma_coherent_ok call incorrectly and dealing as if it's invalid. This ends up with weird errors like iwlwifi probe failure or amdgpu screen flickering. This patch corrects the logic error. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1088658 Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1088902 Fixes: 0176adb00406 ("swiotlb: refactor coherent buffer allocation") Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* | | | radix tree: use GFP_ZONEMASK bits of gfp_t for flagsMatthew Wilcox2018-04-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "XArray", v9. (First part thereof). This patchset is, I believe, appropriate for merging for 4.17. It contains the XArray implementation, to eventually replace the radix tree, and converts the page cache to use it. This conversion keeps the radix tree and XArray data structures in sync at all times. That allows us to convert the page cache one function at a time and should allow for easier bisection. Other than renaming some elements of the structures, the data structures are fundamentally unchanged; a radix tree walk and an XArray walk will touch the same number of cachelines. I have changes planned to the XArray data structure, but those will happen in future patches. Improvements the XArray has over the radix tree: - The radix tree provides operations like other trees do; 'insert' and 'delete'. But what most users really want is an automatically resizing array, and so it makes more sense to give users an API that is like an array -- 'load' and 'store'. We still have an 'insert' operation for users that really want that semantic. - The XArray considers locking as part of its API. This simplifies a lot of users who formerly had to manage their own locking just for the radix tree. It also improves code generation as we can now tell RCU that we're holding a lock and it doesn't need to generate as much fencing code. The other advantage is that tree nodes can be moved (not yet implemented). - GFP flags are now parameters to calls which may need to allocate memory. The radix tree forced users to decide what the allocation flags would be at creation time. It's much clearer to specify them at allocation time. - Memory is not preloaded; we don't tie up dozens of pages on the off chance that the slab allocator fails. Instead, we drop the lock, allocate a new node and retry the operation. We have to convert all the radix tree, IDA and IDR preload users before we can realise this benefit, but I have not yet found a user which cannot be converted. - The XArray provides a cmpxchg operation. The radix tree forces users to roll their own (and at least four have). - Iterators take a 'max' parameter. That simplifies many users and will reduce the amount of iteration done. - Iteration can proceed backwards. We only have one user for this, but since it's called as part of the pagefault readahead algorithm, that seemed worth mentioning. - RCU-protected pointers are not exposed as part of the API. There are some fun bugs where the page cache forgets to use rcu_dereference() in the current codebase. - Value entries gain an extra bit compared to radix tree exceptional entries. That gives us the extra bit we need to put huge page swap entries in the page cache. - Some iterators now take a 'filter' argument instead of having separate iterators for tagged/untagged iterations. The page cache is improved by this: - Shorter, easier to read code - More efficient iterations - Reduction in size of struct address_space - Fewer walks from the top of the data structure; the XArray API encourages staying at the leaf node and conducting operations there. This patch (of 8): None of these bits may be used for slab allocations, so we can use them as radix tree flags as long as we mask them off before passing them to the slab allocator. Move the IDR flag from the high bits to the GFP_ZONEMASK bits. Link: http://lkml.kernel.org/r/20180313132639.17387-3-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | lib/list_debug.c: print unmangled addressesMatthew Wilcox2018-04-111-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The entire point of printing the pointers in list_debug is to see if there's any useful information in them (eg poison values, ASCII, etc); obscuring them to see if they compare equal makes them much less useful. If an attacker can force this message to be printed, we've already lost. Link: http://lkml.kernel.org/r/20180401223237.GV13332@bombadil.infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Tobin C. Harding <me@tobin.cc> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | lib/test_ubsan.c: make test_ubsan_misaligned_access() staticColin Ian King2018-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | test_ubsan_misaligned_access() is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: lib/test_ubsan.c:91:6: warning: symbol 'test_ubsan_misaligned_access' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20180313103048.28513-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | lib: add testing module for UBSANJinbum Park2018-04-113-0/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a test module for UBSAN. It triggers all undefined behaviors that linux supports now, and detect them. All test-cases have passed by compiling with gcc-5.5.0. If use gcc-4.9.x, misaligned, out-of-bounds, object-size-mismatch will not be detected. Because gcc-4.9.x doesn't support them. Link: http://lkml.kernel.org/r/20180309102247.GA2944@pjb1027-Latitude-E5410 Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | lib/test_bitmap.c: do not accidentally use stack VLAKees Cook2018-04-111-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This avoids an accidental stack VLA (since the compiler thinks the value of "len" can change, even when marked "const"). This just replaces it with a #define so it will DTRT. Seen with -Wvla. Fixed as part of the directive to remove all VLAs from the kernel: https://lkml.org/lkml/2018/3/7/621 Link: http://lkml.kernel.org/r/20180307212555.GA17927@beast Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | lib/Kconfig.debug: Debug Lockups and Hangs: keep SOFTLOCKUP options togetherRandy Dunlap2018-04-111-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep all of the SOFTLOCKUP kconfig symbols together (instead of injecting the HARDLOCKUP symbols in the midst of them) so that the config tools display them with their dependencies. Tested with 'make {menuconfig/nconfig/gconfig/xconfig}'. Link: http://lkml.kernel.org/r/6be2d9ed-4656-5b94-460d-7f051e2c7570@infradead.org Fixes: 05a4a9527931 ("kernel/watchdog: split up config options") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | proc: add seq_put_decimal_ull_width to speed up /proc/pid/smapsAndrei Vagin2018-04-111-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | seq_put_decimal_ull_w(m, str, val, width) prints a decimal number with a specified minimal field width. It is equivalent of seq_printf(m, "%s%*d", str, width, val), but it works much faster. == test_smaps.py num = 0 with open("/proc/1/smaps") as f: for x in xrange(10000): data = f.read() f.seek(0, 0) == == Before patch == $ time python test_smaps.py real 0m4.593s user 0m0.398s sys 0m4.158s == After patch == $ time python test_smaps.py real 0m3.828s user 0m0.413s sys 0m3.408s $ perf -g record python test_smaps.py == Before patch == - 79.01% 3.36% python [kernel.kallsyms] [k] show_smap.isra.33 - 75.65% show_smap.isra.33 + 48.85% seq_printf + 15.75% __walk_page_range + 9.70% show_map_vma.isra.23 0.61% seq_puts == After patch == - 75.51% 4.62% python [kernel.kallsyms] [k] show_smap.isra.33 - 70.88% show_smap.isra.33 + 24.82% seq_put_decimal_ull_w + 19.78% __walk_page_range + 12.74% seq_printf + 11.08% show_map_vma.isra.23 + 1.68% seq_puts [akpm@linux-foundation.org: fix drivers/of/unittest.c build] Link: http://lkml.kernel.org/r/20180212074931.7227-1-avagin@openvz.org Signed-off-by: Andrei Vagin <avagin@openvz.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | kasan: prevent compiler from optimizing away memset in testsAndrey Konovalov2018-04-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A compiler can optimize away memset calls by replacing them with mov instructions. There are KASAN tests that specifically test that KASAN correctly handles memset calls so we don't want this optimization to happen. The solution is to add -fno-builtin flag to test_kasan.ko Link: http://lkml.kernel.org/r/105ec9a308b2abedb1a0d1fdced0c22d765e4732.1519924383.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nick Terrell <terrelln@fb.com> Cc: Chris Mason <clm@fb.com> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Cc: Kostya Serebryany <kcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | kasan: fix invalid-free test crashing the kernelAndrey Konovalov2018-04-111-0/+8
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an invalid-free is triggered by one of the KASAN tests, the object doesn't actually get freed. This later leads to a BUG failure in kmem_cache_destroy that checks that there are no allocated objects in the cache that is being destroyed. Fix this by calling kmem_cache_free with the proper object address after the call that triggers invalid-free. Link: http://lkml.kernel.org/r/286eaefc0a6c3fa9b83b87e7d6dc0fbb5b5c9926.1519924383.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nick Terrell <terrelln@fb.com> Cc: Chris Mason <clm@fb.com> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Cc: Kostya Serebryany <kcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge tag 'trace-v4.17' of ↵Linus Torvalds2018-04-101-0/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New features: - Tom Zanussi's extended histogram work. This adds the synthetic events to have histograms from multiple event data Adds triggers "onmatch" and "onmax" to call the synthetic events Several updates to the histogram code from this - Allow way to nest ring buffer calls in the same context - Allow absolute time stamps in ring buffer - Rewrite of filter code parsing based on Al Viro's suggestions - Setting of trace_clock to global if TSC is unstable (on boot) - Better OOM handling when allocating large ring buffers - Added initcall tracepoints (consolidated initcall_debug code with them) And other various fixes and clean ups" * tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits) init: Have initcall_debug still work without CONFIG_TRACEPOINTS init, tracing: Have printk come through the trace events for initcall_debug init, tracing: instrument security and console initcall trace events init, tracing: Add initcall trace events tracing: Add rcu dereference annotation for test func that touches filter->prog tracing: Add rcu dereference annotation for filter->prog tracing: Fixup logic inversion on setting trace_global_clock defaults tracing: Hide global trace clock from lockdep ring-buffer: Add set/clear_current_oom_origin() during allocations ring-buffer: Check if memory is available before allocation lockdep: Add print_irqtrace_events() to __warn vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK) tracing: Uninitialized variable in create_tracing_map_fields() tracing: Make sure variable string fields are NULL-terminated tracing: Add action comparisons when testing matching hist triggers tracing: Don't add flag strings when displaying variable references tracing: Fix display of hist trigger expressions containing timestamps ftrace: Drop a VLA in module_exists() tracing: Mention trace_clock=global when warning about unstable clocks tracing: Default to using trace_global_clock if sched_clock is unstable ...
| * | | vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK)Steven Rostedt (VMware)2018-04-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 841a915d20c7b2 ("printf: Do not have bprintf dereference pointers") would preprocess various pointers that are dereferenced in the bprintf() because the recording and printing are done at two different times. Some pointers stayed dereferenced in the ring buffer because user space could handle them (namely "%pS" and friends). Pointers that are not dereferenced should not be processed immediately but instead just saved directly. Cc: stable@vger.kernel.org Fixes: 841a915d20c7b2 ("printf: Do not have bprintf dereference pointers") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
* | | | Merge tag 'powerpc-4.17-1' of ↵Linus Torvalds2018-04-076-5/+157
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for 4PB user address space on 64-bit, opt-in via mmap(). - Removal of POWER4 support, which was accidentally broken in 2016 and no one noticed, and blocked use of some modern instructions. - Workarounds so that the hypervisor can enable Transactional Memory on Power9. - A series to disable the DAWR (Data Address Watchpoint Register) on Power9. - More information displayed in the meltdown/spectre_v1/v2 sysfs files. - A vpermxor (Power8 Altivec) implementation for the raid6 Q Syndrome. - A big series to make the allocation of our pacas (per cpu area), kernel page tables, and per-cpu stacks NUMA aware when using the Radix MMU on Power9. And as usual many fixes, reworks and cleanups. Thanks to: Aaro Koskinen, Alexandre Belloni, Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Aneesh Kumar K.V, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe Lombard, Cyril Bur, Daniel Axtens, Dave Young, Finn Thain, Frederic Barrat, Gustavo Romero, Horia Geantă, Jonathan Neuschäfer, Kees Cook, Larry Finger, Laurent Dufour, Laurent Vivier, Logan Gunthorpe, Madhavan Srinivasan, Mark Greer, Mark Hairgrove, Markus Elfring, Mathieu Malaterre, Matt Brown, Matt Evans, Mauricio Faria de Oliveira, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Rob Herring, Sam Bobroff, Segher Boessenkool, Simon Guo, Simon Horman, Stewart Smith, Sukadev Bhattiprolu, Suraj Jitindar Singh, Thiago Jung Bauermann, Vaibhav Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wei Yongjun" * tag 'powerpc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (207 commits) powerpc/64s/idle: Fix restore of AMOR on POWER9 after deep sleep powerpc/64s: Fix POWER9 DD2.2 and above in cputable features powerpc/64s: Fix pkey support in dt_cpu_ftrs, add CPU_FTR_PKEY bit powerpc/64s: Fix dt_cpu_ftrs to have restore_cpu clear unwanted LPCR bits Revert "powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead" powerpc: iomap.c: introduce io{read|write}64_{lo_hi|hi_lo} powerpc: io.h: move iomap.h include so that it can use readq/writeq defs cxl: Fix possible deadlock when processing page faults from cxllib powerpc/hw_breakpoint: Only disable hw breakpoint if cpu supports it powerpc/mm/radix: Update command line parsing for disable_radix powerpc/mm/radix: Parse disable_radix commandline correctly. powerpc/mm/hugetlb: initialize the pagetable cache correctly for hugetlb powerpc/mm/radix: Update pte fragment count from 16 to 256 on radix powerpc/mm/keys: Update documentation and remove unnecessary check powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead powerpc/64s/idle: Consolidate power9_offline_stop()/power9_idle_stop() powerpc/powernv: Always stop secondaries before reboot/shutdown powerpc: hard disable irqs in smp_send_stop loop powerpc: use NMI IPI for smp_send_stop powerpc/powernv: Fix SMT4 forcing idle code ...
| * | | | lib/raid6: Build proper raid6test files on powerpcMatt Brown2018-03-202-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the raid6 test Makefile did not build the POWER specific files (altivec and vpermxor). This patch fixes the bug, so that all appropriate files for powerpc are built. This patch also fixes the missing and mismatched ifdef statements to allow the altivec.uc file to be built correctly. Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | | | lib/raid6/altivec: Add vpermxor implementation for raid6 Q syndromeMatt Brown2018-03-205-3/+151
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses the vpermxor instruction to optimise the raid6 Q syndrome. This instruction was made available with POWER8, ISA version 2.07. It allows for both vperm and vxor instructions to be done in a single instruction. This has been tested for correctness on a ppc64le vm with a basic RAID6 setup containing 5 drives. The performance benchmarks are from the raid6test in the /lib/raid6/test directory. These results are from an IBM Firestone machine with ppc64le architecture. The benchmark results show a 35% speed increase over the best existing algorithm for powerpc (altivec). The raid6test has also been run on a big-endian ppc64 vm to ensure it also works for big-endian architectures. Performance benchmarks: raid6: altivecx4 gen() 18773 MB/s raid6: altivecx8 gen() 19438 MB/s raid6: vpermxor4 gen() 25112 MB/s raid6: vpermxor8 gen() 26279 MB/s Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com> Reviewed-by: Daniel Axtens <dja@axtens.net> [mpe: Add VPERMXOR macro so we can build with old binutils] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | | | Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds2018-04-063-0/+298
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
| * | | | lib: Add generic PIO mapping methodZhichang Yuan2018-03-213-0/+298
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 41f8bba7f555 ("of/pci: Add pci_register_io_range() and pci_pio_to_address()") added support for PCI I/O space mapped into CPU physical memory space. With that support, the I/O ranges configured for PCI/PCIe hosts on some architectures can be mapped to logical PIO and converted easily between CPU address and the corresponding logical PIO. Based on this, PCI I/O port space can be accessed via in/out accessors that use memory read/write. But on some platforms, there are bus hosts that access I/O port space with host-local I/O port addresses rather than memory addresses. Add a more generic I/O mapping method to support those devices. With this patch, both the CPU addresses and the host-local port can be mapped into the logical PIO space with different logical/fake PIOs. After this, all the I/O accesses to either PCI MMIO devices or host-local I/O peripherals can be unified into the existing I/O accessors defined in asm-generic/io.h and be redirected to the right device-specific hooks based on the input logical PIO. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> [bhelgaas: remove -EFAULT return from logic_pio_register_range() per https://lkml.kernel.org/r/20180403143909.GA21171@ulmo, fix NULL pointer checking per https://lkml.kernel.org/r/20180403211505.GA29612@embeddedor.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
* | | | | Merge branch 'akpm' (patches from Andrew)Linus Torvalds2018-04-063-1/+6
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge updates from Andrew Morton: - a few misc things - ocfs2 updates - the v9fs maintainers have been missing for a long time. I've taken over v9fs patch slinging. - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits) mm,oom_reaper: check for MMF_OOM_SKIP before complaining mm/ksm: fix interaction with THP mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t headers: untangle kmemleak.h from mm.h include/linux/mmdebug.h: make VM_WARN* non-rvals mm/page_isolation.c: make start_isolate_page_range() fail if already isolated mm: change return type to vm_fault_t mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory kernel/fork.c: detect early free of a live mm mm: make counting of list_lru_one::nr_items lockless mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static block_invalidatepage(): only release page if the full page was invalidated mm: kernel-doc: add missing parameter descriptions mm/swap.c: remove @cold parameter description for release_pages() mm/nommu: remove description of alloc_vm_area zram: drop max_zpage_size and use zs_huge_class_size() zsmalloc: introduce zs_huge_class_size() mm: fix races between swapoff and flush dcache fs/direct-io.c: minor cleanups in do_blockdev_direct_IO ...
| * | | | | headers: untangle kmemleak.h from mm.hRandy Dunlap2018-04-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | lib: fix stall in __bitmap_parselist()Yury Norov2018-04-052-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzbot is catching stalls at __bitmap_parselist() (https://syzkaller.appspot.com/bug?id=ad7e0351fbc90535558514a71cd3edc11681997a). The trigger is unsigned long v = 0; bitmap_parselist("7:,", &v, BITS_PER_LONG); which results in hitting infinite loop at while (a <= b) { off = min(b - a + 1, used_size); bitmap_set(maskp, a, off); a += group_size; } due to used_size == group_size == 0. Link: http://lkml.kernel.org/r/20180404162647.15763-1-ynorov@caviumnetworks.com Fixes: 0a5ce0831d04382a ("lib/bitmap.c: make bitmap_parselist() thread-safe and much faster") Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+6887cbb011c8054e8a3d@syzkaller.appspotmail.com> Cc: Noam Camus <noamca@mellanox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Merge branch 'for-4.17' of ↵Linus Torvalds2018-04-052-1/+62
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Add info about loaded kdump kernel into the dump stack header - Move dump-stack related code from printk.c to lib/dump_stack.c - Write message about suspending consoles in KERN_INFO log level * 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: change message to pr_info printk: move dump stack related code to lib/dump_stack.c print kdump kernel loaded status in stack dump
| * | | | | | printk: move dump stack related code to lib/dump_stack.cDave Young2018-03-152-1/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dump_stack related stuff should belong to lib/dump_stack.c thus move them there. Also conditionally compile lib/dump_stack.c since dump_stack code does not make sense if printk is disabled. Link: http://lkml.kernel.org/r/20180213072834.GA24784@dhcp-128-65.nay.redhat.com To: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: akpm@linux-foundation.org Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Dave Young <dyoung@redhat.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
* | | | | | | Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds2018-04-051-5/+5
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
| * | | | | | | sbitmap: use test_and_set_bit_lock()/clear_bit_unlock()Omar Sandoval2018-02-281-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sbitmap_queue_get()/sbitmap_queue_clear() are used for allocating/freeing a resource, so they should provide acquire/release barrier semantics, respectively. sbitmap_get() currently contains a full barrier, which is unnecessary, so use test_and_set_bit_lock() instead of test_and_set_bit() (these are equivalent on x86_64). sbitmap_clear_bit() does not imply any barriers, which is incorrect, as accesses of the resource (e.g., request) could potentially get reordered to after the clear_bit(). Introduce sbitmap_clear_bit_unlock() and use it for sbitmap_queue_clear() (this only adds a compiler barrier on x86_64). The other existing user of sbitmap_clear_bit() (the blk-mq software queue pending map) is serialized through a spinlock and does not need this. Reported-by: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | | | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2018-04-052-8/+8
|\ \ \ \ \ \ \ \ | |_|_|/ / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: kfifo: fix inaccurate comment tools/thermal: tmon: fix for segfault net: Spelling s/stucture/structure/ edd: don't spam log if no EDD information is present Documentation: Fix early-microcode.txt references after file rename tracing: Block comments should align the * on each line treewide: Fix typos in printk GenWQE: Fix a typo in two comments treewide: Align function definition open/close braces
OpenPOWER on IntegriCloud