summaryrefslogtreecommitdiffstats
path: root/kernel/trace/trace_sched_wakeup.c
Commit message (Collapse)AuthorAgeFilesLines
* ftrace: rename FTRACE to FUNCTION_TRACERSteven Rostedt2008-10-201-2/+2
| | | | | | | | | | | | Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: preempt disable over interrupt disableSteven Rostedt2008-10-141-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the new ring buffer infrastructure in ftrace, I'm trying to make ftrace a little more light weight. This patch converts a lot of the local_irq_save/restore into preempt_disable/enable. The original preempt count in a lot of cases has to be sent in as a parameter so that it can be recorded correctly. Some places were recording it incorrectly before anyway. This is also laying the ground work to make ftrace a little bit more reentrant, and remove all locking. The function tracers must still protect from reentrancy. Note: All the function tracers must be careful when using preempt_disable. It must do the following: resched = need_resched(); preempt_disable_notrace(); [...] if (resched) preempt_enable_no_resched_notrace(); else preempt_enable_notrace(); The reason is that if this function traces schedule() itself, the preempt_enable_notrace() will cause a schedule, which will lead us into a recursive failure. If we needed to reschedule before calling preempt_disable, we should have already scheduled. Since we did not, this is most likely that we should not and are probably inside a schedule function. If resched was not set, we still need to catch the need resched flag being set when preemption was off and the if case at the end will catch that for us. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: make work with new ring bufferSteven Rostedt2008-10-141-1/+1
| | | | | | | This patch ports ftrace over to the new ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: port to tracepointsMathieu Desnoyers2008-10-141-101/+34
| | | | | | | | | | | | Porting the trace_mark() used by ftrace to tracepoints. (cleanup) Changelog : - Change error messages : marker -> tracepoint [ mingo@elte.hu: conflict resolutions ] Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: 'Peter Zijlstra' <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at kernel/lockdep.c:2731 ↵Steven Rostedt2008-07-181-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | check_flags (ftrace) On Wed, 16 Jul 2008, Vegard Nossum wrote: > When booting 4d3702b6, I got this huge thing: > > Testing tracer wakeup: <4>------------[ cut here ]------------ > WARNING: at kernel/lockdep.c:2731 check_flags+0x123/0x160() > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.26-crashing-02127-g4d3702b6 #30 > [<c015c349>] warn_on_slowpath+0x59/0xb0 > [<c01276c6>] ? ftrace_call+0x5/0x8 > [<c012d800>] ? native_read_tsc+0x0/0x20 > [<c0158de2>] ? sub_preempt_count+0x12/0xf0 > [<c01814eb>] ? trace_hardirqs_off+0xb/0x10 > [<c0182fbc>] ? __lock_acquire+0x2cc/0x1120 > [<c01814eb>] ? trace_hardirqs_off+0xb/0x10 > [<c01276af>] ? mcount_call+0x5/0xa > [<c017ff53>] check_flags+0x123/0x160 > [<c0183e61>] lock_acquire+0x51/0xd0 > [<c01276c6>] ? ftrace_call+0x5/0x8 > [<c0613d4f>] _spin_lock_irqsave+0x5f/0xa0 > [<c01a8d45>] ? ftrace_record_ip+0xf5/0x220 > [<c02d5413>] ? debug_locks_off+0x3/0x50 > [<c01a8d45>] ftrace_record_ip+0xf5/0x220 > [<c01276af>] mcount_call+0x5/0xa > [<c02d5418>] ? debug_locks_off+0x8/0x50 > [<c017ff27>] check_flags+0xf7/0x160 > [<c0183e61>] lock_acquire+0x51/0xd0 > [<c01276c6>] ? ftrace_call+0x5/0x8 > [<c0613d4f>] _spin_lock_irqsave+0x5f/0xa0 > [<c01affcd>] ? wakeup_tracer_call+0x6d/0xf0 > [<c01625e2>] ? _local_bh_enable+0x62/0xb0 > [<c0158ddd>] ? sub_preempt_count+0xd/0xf0 > [<c01affcd>] wakeup_tracer_call+0x6d/0xf0 > [<c0162724>] ? __do_softirq+0xf4/0x110 > [<c01afff1>] ? wakeup_tracer_call+0x91/0xf0 > [<c01276c6>] ftrace_call+0x5/0x8 > [<c0162724>] ? __do_softirq+0xf4/0x110 > [<c0158de2>] ? sub_preempt_count+0x12/0xf0 > [<c01625e2>] _local_bh_enable+0x62/0xb0 > [<c0162724>] __do_softirq+0xf4/0x110 > [<c01627ed>] do_softirq+0xad/0xb0 > [<c0162a15>] irq_exit+0xa5/0xb0 > [<c013a506>] smp_apic_timer_interrupt+0x66/0xa0 > [<c02d3fac>] ? trace_hardirqs_off_thunk+0xc/0x10 > [<c0127449>] apic_timer_interrupt+0x2d/0x34 > [<c018007b>] ? find_usage_backwards+0xb/0xf0 > [<c0613a09>] ? _spin_unlock_irqrestore+0x69/0x80 > [<c014ef32>] tg_shares_up+0x132/0x1d0 > [<c014d2a2>] walk_tg_tree+0x62/0xa0 > [<c014ee00>] ? tg_shares_up+0x0/0x1d0 > [<c014a860>] ? tg_nop+0x0/0x10 > [<c015499d>] update_shares+0x5d/0x80 > [<c0154a2f>] try_to_wake_up+0x6f/0x280 > [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0 > [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0 > [<c0154c94>] wake_up_process+0x14/0x20 > [<c01725f6>] kthread_create+0x66/0xb0 > [<c0195400>] ? do_stop+0x0/0x200 > [<c0195320>] ? __stop_machine_run+0x30/0xb0 > [<c0195340>] __stop_machine_run+0x50/0xb0 > [<c0195400>] ? do_stop+0x0/0x200 > [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0 > [<c061242d>] ? mutex_unlock+0xd/0x10 > [<c01953cc>] stop_machine_run+0x2c/0x60 > [<c01a94d3>] unregister_ftrace_function+0x103/0x180 > [<c01b0517>] stop_wakeup_tracer+0x17/0x60 > [<c01b056f>] wakeup_tracer_ctrl_update+0xf/0x30 > [<c01ab8d5>] trace_selftest_startup_wakeup+0xb5/0x130 > [<c01ab950>] ? trace_wakeup_test_thread+0x0/0x70 > [<c01aadf5>] register_tracer+0x135/0x1b0 > [<c0877d02>] init_wakeup_tracer+0xd/0xf > [<c085d437>] kernel_init+0x1a9/0x2ce > [<c061397b>] ? _spin_unlock_irq+0x3b/0x60 > [<c02d3f9c>] ? trace_hardirqs_on_thunk+0xc/0x10 > [<c0877cf5>] ? init_wakeup_tracer+0x0/0xf > [<c0182646>] ? trace_hardirqs_on_caller+0x126/0x180 > [<c02d3f9c>] ? trace_hardirqs_on_thunk+0xc/0x10 > [<c01269c8>] ? restore_nocheck_notrace+0x0/0xe > [<c085d28e>] ? kernel_init+0x0/0x2ce > [<c085d28e>] ? kernel_init+0x0/0x2ce > [<c01275fb>] kernel_thread_helper+0x7/0x10 > ======================= > ---[ end trace a7919e7f17c0a725 ]--- > irq event stamp: 579530 > hardirqs last enabled at (579528): [<c01826ab>] trace_hardirqs_on+0xb/0x10 > hardirqs last disabled at (579529): [<c01814eb>] trace_hardirqs_off+0xb/0x10 > softirqs last enabled at (579530): [<c0162724>] __do_softirq+0xf4/0x110 > softirqs last disabled at (579517): [<c01627ed>] do_softirq+0xad/0xb0 > irq event stamp: 579530 > hardirqs last enabled at (579528): [<c01826ab>] trace_hardirqs_on+0xb/0x10 > hardirqs last disabled at (579529): [<c01814eb>] trace_hardirqs_off+0xb/0x10 > softirqs last enabled at (579530): [<c0162724>] __do_softirq+0xf4/0x110 > softirqs last disabled at (579517): [<c01627ed>] do_softirq+0xad/0xb0 > PASSED > > Incidentally, the kernel also hung while I was typing in this report. Things get weird between lockdep and ftrace because ftrace can be called within lockdep internal code (via the mcount pointer) and lockdep can be called with ftrace (via spin_locks). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: start wakeup tracing after setting function tracerSteven Rostedt2008-07-111-1/+2
| | | | | | | | | | | Enabling the wakeup tracer before enabling the function tracing causes some strange results due to the dynamic enabling of the functions. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: add function tracing to wake up tracingSteven Rostedt2008-05-261-1/+66
| | | | | | | | | | | | This patch adds function tracing to the functions that are called on the CPU of the task being traced. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Port ftrace to markersMathieu Desnoyers2008-05-231-6/+100
| | | | | | | | | | | | Porting ftrace to the marker infrastructure. Don't need to chain to the wakeup tracer from the sched tracer, because markers support multiple probes connected. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: printk and trace irqsoff and wakeupsSteven Rostedt2008-05-231-13/+0
| | | | | | | | | | | | | | | | | | printk called from wakeup critical timings and irqs off can cause deadlocks since printk might do a wakeup itself. If the call to printk happens with the runqueue lock held, it can deadlock. This patch protects the printk from being called in trace irqs off with a test to see if the runqueue for the current CPU is locked. If it is locked, the printk is skipped. The wakeup always holds the runqueue lock, so the printk is simply removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: sched tracer fixIngo Molnar2008-05-231-10/+3
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: add wakeup events to sched tracerIngo Molnar2008-05-231-1/+1
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: remove notraceIngo Molnar2008-05-231-14/+14
| | | | | | | | now that we have a kbuild method for notrace, no need to pollute the C code with the annotations. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: add trace_function api for other tracers to useSteven Rostedt2008-05-231-2/+3
| | | | | | | | | | | | | | | | A new check was added in the ftrace function that wont trace if the CPU trace buffer is disabled. Unfortunately, other tracers used ftrace() to write to the buffer after they disabled it. The new disable check makes these calls into a nop. This patch changes the __ftrace that is called without the check into a new api for the other tracers to use, called "trace_function". The other tracers use this interface instead when the trace CPU buffer is already disabled. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: timestamp syncing, prepareIngo Molnar2008-05-231-2/+2
| | | | | | | rename and uninline now() to ftrace_now(). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: cleanupsIngo Molnar2008-05-231-12/+6
| | | | | | | factor out code and clean it up. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: add self-testsSteven Rostedt2008-05-231-0/+3
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: tracer for scheduler wakeup latencySteven Rostedt2008-05-231-0/+310
This patch adds the tracer that tracks the wakeup latency of the highest priority waking task. "wakeup" is added to /debugfs/tracing/available_tracers Also added to /debugfs/tracing tracing_max_latency holds the current max latency for the wakeup wakeup_thresh if set to other than zero, a log will be recorded for every wakeup that takes longer than the number entered in here (usecs for all counters) (deletes previous trace) Examples: (with ftrace_enabled = 0) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 Signed-off-by: Ingo Molnar <mingo@elte.hu> -------------------------------------------------------------------- latency: 26 us, #2/2, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: migration/0-3 (uid:0 nice:-5 policy:1 rt_prio:99) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / quilt-8551 0d..3 0us+: wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>) quilt-8551 0d..4 26us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>) vim:ft=help ============ (with ftrace_enabled = 1) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 -------------------------------------------------------------------- latency: 36 us, #45/45, CPU#0 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: migration/1-5 (uid:0 nice:-5 policy:1 rt_prio:99) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / bash-10653 1d..3 0us : wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>) bash-10653 1d..3 1us : try_to_wake_up+0x271/0x2e7 <ffffffff80233dcf> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>) bash-10653 1d..2 2us : try_to_wake_up+0x296/0x2e7 <ffffffff80233df4> (update_rq_clock+0x9/0x20 <ffffffff802303f3>) bash-10653 1d..2 2us : update_rq_clock+0x1e/0x20 <ffffffff80230408> (__update_rq_clock+0xc/0x90 <ffffffff80230366>) bash-10653 1d..2 3us : __update_rq_clock+0x1b/0x90 <ffffffff80230375> (sched_clock+0x9/0x29 <ffffffff80214529>) bash-10653 1d..2 4us : try_to_wake_up+0x2a6/0x2e7 <ffffffff80233e04> (activate_task+0xc/0x3f <ffffffff8022ffca>) bash-10653 1d..2 4us : activate_task+0x2d/0x3f <ffffffff8022ffeb> (enqueue_task+0xe/0x66 <ffffffff8022ff66>) bash-10653 1d..2 5us : enqueue_task+0x5b/0x66 <ffffffff8022ffb3> (enqueue_task_rt+0x9/0x3c <ffffffff80233351>) bash-10653 1d..2 6us : try_to_wake_up+0x2ba/0x2e7 <ffffffff80233e18> (check_preempt_wakeup+0x12/0x99 <ffffffff80234f84>) [...] bash-10653 1d..5 33us : tracing_record_cmdline+0xcf/0xd4 <ffffffff80338aad> (_spin_unlock+0x9/0x33 <ffffffff8048d3ec>) bash-10653 1d..5 34us : _spin_unlock+0x19/0x33 <ffffffff8048d3fc> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>) bash-10653 1d..4 35us : wakeup_sched_switch+0x65/0x2ff <ffffffff80339f66> (_spin_lock_irqsave+0xc/0xa9 <ffffffff8048d08b>) bash-10653 1d..4 35us : _spin_lock_irqsave+0x19/0xa9 <ffffffff8048d098> (add_preempt_count+0xe/0x77 <ffffffff8023311a>) bash-10653 1d..4 36us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>) vim:ft=help ============ The [...] was added here to not waste your email box space. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
OpenPOWER on IntegriCloud