summaryrefslogtreecommitdiffstats
path: root/kernel/sched.c
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] Fix longstanding load balancing bug in the schedulerChristoph Lameter2006-09-261-8/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The scheduler will stop load balancing if the most busy processor contains processes pinned via processor affinity. The scheduler currently only does one search for busiest cpu. If it cannot pull any tasks away from the busiest cpu because they were pinned then the scheduler goes into a corner and sulks leaving the idle processors idle. F.e. If you have processor 0 busy running four tasks pinned via taskset, there are none on processor 1 and one just started two processes on processor 2 then the scheduler will not move one of the two processes away from processor 2. This patch fixes that issue by forcing the scheduler to come out of its corner and retrying the load balancing by considering other processors for load balancing. This patch was originally developed by John Hawkes and discussed at http://marc.theaimsgroup.com/?l=linux-kernel&m=113901368523205&w=2. I have removed extraneous material and gone back to equipping struct rq with the cpu the queue is associated with since this makes the patch much easier and it is likely that others in the future will have the same difficulty of figuring out which processor owns which runqueue. The overhead added through these patches is a single word on the stack if the kernel is configured to support 32 cpus or less (32 bit). For 32 bit environments the maximum number of cpus that can be configued is 255 which would result in the use of 32 bytes additional on the stack. On IA64 up to 1k cpus can be configured which will result in the use of 128 additional bytes on the stack. The maximum additional cache footprint is one cacheline. Typically memory use will be much less than a cacheline and the additional cpumask will be placed on the stack in a cacheline that already contains other local variable. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: John Hawkes <hawkes@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Williams <pwil3058@bigpond.net.au> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] revert "Drop tasklist lock in do_sched_setscheduler"Oleg Nesterov2006-08-271-3/+1
| | | | | | | | | | | | | | sched_setscheduler() looks at ->signal->rlim[]. It is unsafe do dereference ->signal unless tasklist_lock or ->siglock is held (or p == current). We pin the task structure, but this can't prevent from release_task()->__exit_signal() which sets ->signal = NULL. Restore tasklist_lock across the setscheduler call. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pi-futex: missing pi_waiters plist initializationHeiko Carstens2006-07-311-0/+5
| | | | | | | | | | | | | | | | | | | | | | Initialize init task's pi_waiters plist. Otherwise cpu hotplug of cpu 0 might crash, since rt_mutex_getprio() accesses an uninitialized list head. call chain which led to crash: take_cpu_down sched_idle_next __setscheduler rt_mutex_getprio Using PLIST_HEAD_INIT in the INIT_TASK macro doesn't work unfortunately, since the pi_waiters member is only conditionally present. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix cond_resched() fixJim Houston2006-07-311-5/+5
| | | | | | | | | | | | | | In cond_resched_lock() it calls __resched_legal() before dropping the spin lock. __resched_legal() will always finds the preempt_count non-zero and will prevent the call to __cond_resched(). The attached patch adds a parameter to __resched_legal() with the expected preempt_count value. Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: build_sched_domains() fixSiddha, Suresh B2006-07-311-1/+6
| | | | | | | | | | | Use the correct groups while initializing sched groups power for allnodes_domain. This fixes the crash observed while creating exclusive cpusets. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Reported-and-tested-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] per-task-delay-accounting: cpu delay collection via schedstatsChandra Seetharaman2006-07-141-22/+49
| | | | | | | | | | | | | | | | | Make the task-related schedstats functions callable by delay accounting even if schedstats collection isn't turned on. This removes the dependency of delay accounting on schedstats. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Shailabh Nagar <nagar@watson.ibm.com> Signed-off-by: Balbir Singh <balbir@in.ibm.com> Cc: Jes Sorensen <jes@sgi.com> Cc: Peter Chubb <peterc@gelato.unsw.edu.au> Cc: Erich Focht <efocht@ess.nec.de> Cc: Levent Serinol <lserinol@gmail.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] per-task-delay-accounting: sync block I/O and swapin delay collectionShailabh Nagar2006-07-141-0/+5
| | | | | | | | | | | | | | | | | | | | | Unlike earlier iterations of the delay accounting patches, now delays are only collected for the actual I/O waits rather than try and cover the delays seen in I/O submission paths. Account separately for block I/O delays incurred as a result of swapin page faults whose frequency can be affected by the task/process' rss limit. Hence swapin delays can act as feedback for rss limit changes independent of I/O priority changes. Signed-off-by: Shailabh Nagar <nagar@watson.ibm.com> Signed-off-by: Balbir Singh <balbir@in.ibm.com> Cc: Jes Sorensen <jes@sgi.com> Cc: Peter Chubb <peterc@gelato.unsw.edu.au> Cc: Erich Focht <efocht@ess.nec.de> Cc: Levent Serinol <lserinol@gmail.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: core, fix rq-lock handling on __ARCH_WANT_UNLOCKED_CTXSWIngo Molnar2006-07-141-0/+8
| | | | | | | | | | | | | | | | | On platforms that have __ARCH_WANT_UNLOCKED_CTXSW set and want to implement lock validator support there's a bug in rq->lock handling: in this case we dont 'carry over' the runqueue lock into another task - but still we did a spinlock_release() of it. Fix this by making the spinlock_release() in context_switch() dependent on !__ARCH_WANT_UNLOCKED_CTXSW. (Reported by Ralf Baechle on MIPS, which has __ARCH_WANT_UNLOCKED_CTXSW. This fixes a lockdep-internal BUG message on such platforms.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] small kernel/sched.c cleanupAndreas Mohr2006-07-101-10/+7
| | | | | | | | | | - constify and optimize stat_nam (thanks to Michael Tokarev!) - spelling and comment fixes Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: fix bug in __migrate_task()Peter Williams2006-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In the function __migrate_task(), deactivate_task() followed by activate_task() is used to move the task from one run queue to another. This has two undesirable effects: 1. The task's priority is recalculated. (Nowhere else in the scheduler code is the priority recalculated for a change of CPU.) 2. The task's time stamp is set to the current time. At the very least, this makes the adjustment of the time stamp before the call to deactivate_task() redundant but I believe the problem is more serious as the time stamp now holds the time of the queue change instead of the time at which the task was woken. In addition, unless dest_rq is the same queue as "current" is on the time stamp could be inaccurate due to inter CPU drift. Solution: Replace the call to activate_task() with one to __activate_task(). Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: cleanup, convert sched.c-internal typedefs to structIngo Molnar2006-07-031-125/+125
| | | | | | | | | | | | | | | | | | | convert: - runqueue_t to 'struct rq' - prio_array_t to 'struct prio_array' - migration_req_t to 'struct migration_req' I was the one who added these but they are both against the kernel coding style and also were used inconsistently at places. So just get rid of them at once, now that we are flushing the scheduler patch-queue anyway. Conversion was mostly scripted, the result was reviewed and all secondary whitespace and style impact (if any) was fixed up by hand. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: cleanup, remove task_t, convert to struct task_structIngo Molnar2006-07-031-91/+101
| | | | | | | | | | | | cleanup: remove task_t and convert all the uses to struct task_struct. I introduced it for the scheduler anno and it was a mistake. Conversion was mostly scripted, the result was reviewed and all secondary whitespace and style impact (if any) was fixed up by hand. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: clean up fallout of recent changesIngo Molnar2006-07-031-166/+194
| | | | | | | | | | | | | | | | | | | | | | Clean up some of the impact of recent (and not so recent) scheduler changes: - turning macros into nice inline functions - sanitizing and unifying variable definitions - whitespace, style consistency, 80-lines, comment correctness, spelling and curly braces police Due to the macro hell and variable placement simplifications there's even 26 bytes of .text saved: text data bss dec hex filename 25510 4153 192 29855 749f sched.o.before 25484 4153 192 29829 7485 sched.o.after [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: annotate scheduler runqueue locksIngo Molnar2006-07-031-0/+2
| | | | | | | | | | Teach per-CPU runqueue locks and recursive locking code to the lock validator. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: prove spinlock rwlock locking correctnessIngo Molnar2006-07-031-0/+10
| | | | | | | | | | Use the lock validator framework to prove spinlock and rwlock locking correctness. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: irqtrace subsystem, coreIngo Molnar2006-07-031-1/+3
| | | | | | | | | | | | Accurate hard-IRQ-flags and softirq-flags state tracing. This allows us to attach extra functionality to IRQ flags on/off events (such as trace-on/off). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: better lock debuggingIngo Molnar2006-07-031-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generic lock debugging: - generalized lock debugging framework. For example, a bug in one lock subsystem turns off debugging in all lock subsystems. - got rid of the caller address passing (__IP__/__IP_DECL__/etc.) from the mutex/rtmutex debugging code: it caused way too much prototype hackery, and lockdep will give the same information anyway. - ability to do silent tests - check lock freeing in vfree too. - more finegrained debugging options, to allow distributions to turn off more expensive debugging features. There's no separate 'held mutexes' list anymore - but there's a 'held locks' stack within lockdep, which unifies deadlock detection across all lock classes. (this is independent of the lockdep validation stuff - lockdep first checks whether we are holding a lock already) Here are the current debugging options: CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y which do: config DEBUG_MUTEXES bool "Mutex debugging, basic checks" config DEBUG_LOCK_ALLOC bool "Detect incorrect freeing of live mutexes" Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cond_resched() fixAndrew Morton2006-06-301-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a bug identified by Zou Nan hai <nanhai.zou@intel.com>: If the system is in state SYSTEM_BOOTING, and need_resched() is true, cond_resched() returns true even though it didn't reschedule. Consequently need_resched() remains true and JBD locks up. Fix that by teaching cond_resched() to only return true if it really did call schedule(). cond_resched_lock() and cond_resched_softirq() have a problem too. If we're in SYSTEM_BOOTING state and need_resched() is true, these functions will drop the lock and will then try to call schedule(), but the SYSTEM_BOOTING state will prevent schedule() from being called. So on return, need_resched() will still be true, but cond_resched_lock() has to return 1 to tell the caller that the lock was dropped. The caller will probably lock up. Bottom line: if these functions dropped the lock, they _must_ call schedule() to clear need_resched(). Make it so. Also, uninline __cond_resched(). It's largeish, and slowpath. Acked-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] rtmutex: Propagate priority settings into PI lock chainsThomas Gleixner2006-06-271-0/+2
| | | | | | | | | | | | | | | | | When the priority of a task, which is blocked on a lock, changes we must propagate this change into the PI lock chain. Therefor the chain walk code is changed to get rid of the references to current to avoid false positives in the deadlock detector, as setscheduler might be called by a task which holds the lock on which the task whose priority is changed is blocked. Also add some comments about the get/put_task_struct usage to avoid confusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Drop tasklist lock in do_sched_setschedulerThomas Gleixner2006-06-271-1/+3
| | | | | | | | | | | | | | There is no need to hold tasklist_lock across the setscheduler call, when we pin the task structure with get_task_struct(). Interrupts are disabled in setscheduler anyway and the permission checks do not need interrupts disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pi-futex: scheduler support for piIngo Molnar2006-06-271-29/+160
| | | | | | | | | | | | | | | | | | | | | | Add framework to boost/unboost the priority of RT tasks. This consists of: - caching the 'normal' priority in ->normal_prio - providing a functions to set/get the priority of the task - make sched_setscheduler() aware of boosting The effective_prio() cleanups also fix a priority-calculation bug pointed out by Andrey Gelman, in set_user_nice(). has_rt_policy() fix: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Andrey Gelman <agelman@012.net.il> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] BUG() if setscheduler is called from interrupt contextSteven Rostedt2006-06-271-0/+2
| | | | | | | | | | | | | | | | | Thomas Gleixner is adding the call to a rtmutex function in setscheduler. This call grabs a spin_lock that is not always protected by interrupts disabled. So this means that setscheduler cant be called from interrupt context. To prevent this from happening in the future, this patch adds a BUG_ON(in_interrupt()) in that function. (Thanks to akpm <aka. Andrew Morton> for this suggestion). Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: uninline task_rq_lock()Oleg Nesterov2006-06-271-1/+1
| | | | | | | | | | | | Saves 543 bytes from sched.o (gcc 3.3.3). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Con Kolivas <kernel@kolivas.org> Cc: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: mc/smt power savings sched policySiddha, Suresh B2006-06-271-25/+215
| | | | | | | | | | | | | | | | | | | | | | sysfs entries 'sched_mc_power_savings' and 'sched_smt_power_savings' in /sys/devices/system/cpu/ control the MC/SMT power savings policy for the scheduler. Based on the values (1-enable, 0-disable) for these controls, sched groups cpu power will be determined for different domains. When power savings policy is enabled and under light load conditions, scheduler will minimize the physical packages/cpu cores carrying the load and thus conserving power(with a perf impact based on the workload characteristics... see OLS 2005 CMP kernel scheduler paper for more details..) Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Con Kolivas <kernel@kolivas.org> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched_domai: Allocate sched_group structures dynamicallySrivatsa Vaddagiri2006-06-271-5/+43
| | | | | | | | | | | | | | | | | | As explained here: http://marc.theaimsgroup.com/?l=linux-kernel&m=114327539012323&w=2 there is a problem with sharing sched_group structures between two separate sched_group structures for different sched_domains. The patch has been tested and found to avoid the kernel lockup problem described in above URL. Signed-off-by: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched_domai: Use kmalloc_nodeSrivatsa Vaddagiri2006-06-271-2/+3
| | | | | | | | | | | | | | The sched group structures used to represent various nodes need to be allocated from respective nodes (as suggested here also: http://uwsg.ucs.indiana.edu/hypermail/linux/kernel/0603.3/0051.html) Signed-off-by: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched_domai: Don't use GFP_ATOMICSrivatsa Vaddagiri2006-06-271-1/+1
| | | | | | | | | | | | Replace GFP_ATOMIC allocation for sched_group_nodes with GFP_KERNEL based allocation. Signed-off-by: Srivatsa Vaddagiri <vatsa@in.ibm.com Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched_domain: handle kmalloc failureSrivatsa Vaddagiri2006-06-271-61/+78
| | | | | | | | | | | | | | | | Try to handle mem allocation failures in build_sched_domains by bailing out and cleaning up thus-far allocated memory. The patch has a direct consequence that we disable load balancing completely (even at sibling level) upon *any* memory allocation failure. [Lee.Schermerhorn@hp.com: bugfix] Signed-off-by: Srivatsa Vaddagir <vatsa@in.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: Avoid unnecessarily moving highest priority task move_tasks()Peter Williams2006-06-271-5/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: To help distribute high priority tasks evenly across the available CPUs move_tasks() does not, under some circumstances, skip tasks whose load weight is bigger than the designated amount. Because the highest priority task on the busiest queue may be on the expired array it may be moved as a result of this mechanism. Apart from not being the most desirable way to redistribute the high priority tasks (we'd rather move the second highest priority task), there is a risk that this could set up a loop with this task bouncing backwards and forwards between the two queues. (This latter possibility can be demonstrated by running a nice==-20 CPU bound task on an otherwise quiet 2 CPU system.) Solution: Modify the mechanism so that it does not override skip for the highest priority task on the CPU. Of course, if there are more than one tasks at the highest priority then it will allow the override for one of them as this is a desirable redistribution of high priority tasks. Signed-off-by: Peter Williams <pwil3058@bigpond.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: modify move_tasks() to improve load balancing outcomesPeter Williams2006-06-271-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: The move_tasks() function is designed to move UP TO the amount of load it is asked to move and in doing this it skips over tasks looking for ones whose load weights are less than or equal to the remaining load to be moved. This is (in general) a good thing but it has the unfortunate result of breaking one of the original load balancer's good points: namely, that (within the limits imposed by the active/expired array model and the fact the expired is processed first) it moves high priority tasks before low priority ones and this means there's a good chance (see active/expired problem for why it's only a chance) that the highest priority task on the queue but not actually on the CPU will be moved to the other CPU where (as a high priority task) it may preempt the current task. Solution: Modify move_tasks() so that high priority tasks are not skipped when moving them will make them the highest priority task on their new run queue. Signed-off-by: Peter Williams <pwil3058@bigpond.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: implement smpnicePeter Williams2006-06-271-65/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: The introduction of separate run queues per CPU has brought with it "nice" enforcement problems that are best described by a simple example. For the sake of argument suppose that on a single CPU machine with a nice==19 hard spinner and a nice==0 hard spinner running that the nice==0 task gets 95% of the CPU and the nice==19 task gets 5% of the CPU. Now suppose that there is a system with 2 CPUs and 2 nice==19 hard spinners and 2 nice==0 hard spinners running. The user of this system would be entitled to expect that the nice==0 tasks each get 95% of a CPU and the nice==19 tasks only get 5% each. However, whether this expectation is met is pretty much down to luck as there are four equally likely distributions of the tasks to the CPUs that the load balancing code will consider to be balanced with loads of 2.0 for each CPU. Two of these distributions involve one nice==0 and one nice==19 task per CPU and in these circumstances the users expectations will be met. The other two distributions both involve both nice==0 tasks being on one CPU and both nice==19 being on the other CPU and each task will get 50% of a CPU and the user's expectations will not be met. Solution: The solution to this problem that is implemented in the attached patch is to use weighted loads when determining if the system is balanced and, when an imbalance is detected, to move an amount of weighted load between run queues (as opposed to a number of tasks) to restore the balance. Once again, the easiest way to explain why both of these measures are necessary is to use a simple example. Suppose that (in a slight variation of the above example) that we have a two CPU system with 4 nice==0 and 4 nice=19 hard spinning tasks running and that the 4 nice==0 tasks are on one CPU and the 4 nice==19 tasks are on the other CPU. The weighted loads for the two CPUs would be 4.0 and 0.2 respectively and the load balancing code would move 2 tasks resulting in one CPU with a load of 2.0 and the other with load of 2.2. If this was considered to be a big enough imbalance to justify moving a task and that task was moved using the current move_tasks() then it would move the highest priority task that it found and this would result in one CPU with a load of 3.0 and the other with a load of 1.2 which would result in the movement of a task in the opposite direction and so on -- infinite loop. If, on the other hand, an amount of load to be moved is calculated from the imbalance (in this case 0.1) and move_tasks() skips tasks until it find ones whose contributions to the weighted load are less than this amount it would move two of the nice==19 tasks resulting in a system with 2 nice==0 and 2 nice=19 on each CPU with loads of 2.1 for each CPU. One of the advantages of this mechanism is that on a system where all tasks have nice==0 the load balancing calculations would be mathematically identical to the current load balancing code. Notes: struct task_struct: has a new field load_weight which (in a trade off of space for speed) stores the contribution that this task makes to a CPU's weighted load when it is runnable. struct runqueue: has a new field raw_weighted_load which is the sum of the load_weight values for the currently runnable tasks on this run queue. This field always needs to be updated when nr_running is updated so two new inline functions inc_nr_running() and dec_nr_running() have been created to make sure that this happens. This also offers a convenient way to optimize away this part of the smpnice mechanism when CONFIG_SMP is not defined. int try_to_wake_up(): in this function the value SCHED_LOAD_BALANCE is used to represent the load contribution of a single task in various calculations in the code that decides which CPU to put the waking task on. While this would be a valid on a system where the nice values for the runnable tasks were distributed evenly around zero it will lead to anomalous load balancing if the distribution is skewed in either direction. To overcome this problem SCHED_LOAD_SCALE has been replaced by the load_weight for the relevant task or by the average load_weight per task for the queue in question (as appropriate). int move_tasks(): The modifications to this function were complicated by the fact that active_load_balance() uses it to move exactly one task without checking whether an imbalance actually exists. This precluded the simple overloading of max_nr_move with max_load_move and necessitated the addition of the latter as an extra argument to the function. The internal implementation is then modified to move up to max_nr_move tasks and max_load_move of weighted load. This slightly complicates the code where move_tasks() is called and if ever active_load_balance() is changed to not use move_tasks() the implementation of move_tasks() should be simplified accordingly. struct sched_group *find_busiest_group(): Similar to try_to_wake_up(), there are places in this function where SCHED_LOAD_SCALE is used to represent the load contribution of a single task and the same issues are created. A similar solution is adopted except that it is now the average per task contribution to a group's load (as opposed to a run queue) that is required. As this value is not directly available from the group it is calculated on the fly as the queues in the groups are visited when determining the busiest group. A key change to this function is that it is no longer to scale down *imbalance on exit as move_tasks() uses the load in its scaled form. void set_user_nice(): has been modified to update the task's load_weight field when it's nice value and also to ensure that its run queue's raw_weighted_load field is updated if it was runnable. From: "Siddha, Suresh B" <suresh.b.siddha@intel.com> With smpnice, sched groups with highest priority tasks can mask the imbalance between the other sched groups with in the same domain. This patch fixes some of the listed down scenarios by not considering the sched groups which are lightly loaded. a) on a simple 4-way MP system, if we have one high priority and 4 normal priority tasks, with smpnice we would like to see the high priority task scheduled on one cpu, two other cpus getting one normal task each and the fourth cpu getting the remaining two normal tasks. but with current smpnice extra normal priority task keeps jumping from one cpu to another cpu having the normal priority task. This is because of the busiest_has_loaded_cpus, nr_loaded_cpus logic.. We are not including the cpu with high priority task in max_load calculations but including that in total and avg_load calcuations.. leading to max_load < avg_load and load balance between cpus running normal priority tasks(2 Vs 1) will always show imbalanace as one normal priority and the extra normal priority task will keep moving from one cpu to another cpu having normal priority task.. b) 4-way system with HT (8 logical processors). Package-P0 T0 has a highest priority task, T1 is idle. Package-P1 Both T0 and T1 have 1 normal priority task each.. P2 and P3 are idle. With this patch, one of the normal priority tasks on P1 will be moved to P2 or P3.. c) With the current weighted smp nice calculations, it doesn't always make sense to look at the highest weighted runqueue in the busy group.. Consider a load balance scenario on a DP with HT system, with Package-0 containing one high priority and one low priority, Package-1 containing one low priority(with other thread being idle).. Package-1 thinks that it need to take the low priority thread from Package-0. And find_busiest_queue() returns the cpu thread with highest priority task.. And ultimately(with help of active load balance) we move high priority task to Package-1. And same continues with Package-0 now, moving high priority task from package-1 to package-0.. Even without the presence of active load balance, load balance will fail to balance the above scenario.. Fix find_busiest_queue to use "imbalance" when it is lightly loaded. [kernel@kolivas.org: sched: store weighted load on up] [kernel@kolivas.org: sched: add discrete weighted cpu load function] [suresh.b.siddha@intel.com: sched: remove dead code] Signed-off-by: Peter Williams <pwil3058@bigpond.com.au> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: John Hawkes <hawkes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: CPU hotplug race vs. set_cpus_allowed()Kirill Korotaev2006-06-271-4/+14
| | | | | | | | | | | | | There is a race between set_cpus_allowed() and move_task_off_dead_cpu(). __migrate_task() doesn't report any err code, so task can be left on its runqueue if its cpus_allowed mask changed so that dest_cpu is not longer a possible target. Also, chaning cpus_allowed mask requires rq->lock being held. Signed-off-by: Kirill Korotaev <dev@openvz.org> Acked-By: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] unnecessary long index i in schedSteven Rostedt2006-06-271-1/+2
| | | | | | | | | Unless we expect to have more than 2G CPUs, there's no reason to have 'i' as a long long here. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: fix interactive ceiling codeCon Kolivas2006-06-271-25/+27
| | | | | | | | | | | | | | | | | | | | | The relationship between INTERACTIVE_SLEEP and the ceiling is not perfect and not explicit enough. The sleep boost is not supposed to be any larger than without this code and the comment is not clear enough about what exactly it does, just the reason it does it. Fix it. There is a ceiling to the priority beyond which tasks that only ever sleep for very long periods cannot surpass. Fix it. Prevent the on-runqueue bonus logic from defeating the idle sleep logic. Opportunity to micro-optimise. Signed-off-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: simplify bitmap definitionSteven Rostedt2006-06-271-3/+1
| | | | | | | Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: fix smt nice lock contention and optimizationChen, Kenneth W2006-06-271-123/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initial report and lock contention fix from Chris Mason: Recent benchmarks showed some performance regressions between 2.6.16 and 2.6.5. We tracked down one of the regressions to lock contention in schedule heavy workloads (~70,000 context switches per second) kernel/sched.c:dependent_sleeper() was responsible for most of the lock contention, hammering on the run queue locks. The patch below is more of a discussion point than a suggested fix (although it does reduce lock contention significantly). The dependent_sleeper code looks very expensive to me, especially for using a spinlock to bounce control between two different siblings in the same cpu. It is further optimized: * perform dependent_sleeper check after next task is determined * convert wake_sleeping_dependent to use trylock * skip smt runqueue check if trylock fails * optimize double_rq_lock now that smt nice is converted to trylock * early exit in searching first SD_SHARE_CPUPOWER domain * speedup fast path of dependent_sleeper [akpm@osdl.org: cleanup] Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Chris Mason <mason@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpu hotplug: make cpu_notifier related notifier calls __cpuinit onlyChandra Seetharaman2006-06-271-3/+4
| | | | | | | | | | | | | Make notifier_calls associated with cpu_notifier as __cpuinit. __cpuinit makes sure that the function is init time only unless CONFIG_HOTPLUG_CPU is defined. [akpm@osdl.org: section fix] Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpu hotplug: revert initdata patch submitted for 2.6.17Chandra Seetharaman2006-06-271-1/+1
| | | | | | | | | This patch reverts notifier_block changes made in 2.6.17 Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'x86-64'Linus Torvalds2006-06-261-2/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * x86-64: (83 commits) [PATCH] x86_64: x86_64 stack usage debugging [PATCH] x86_64: (resend) x86_64 stack overflow debugging [PATCH] x86_64: msi_apic.c build fix [PATCH] x86_64: i386/x86-64 Add nmi watchdog support for new Intel CPUs [PATCH] x86_64: Avoid broadcasting NMI IPIs [PATCH] x86_64: fix apic error on bootup [PATCH] x86_64: enlarge window for stack growth [PATCH] x86_64: Minor string functions optimizations [PATCH] x86_64: Move export symbols to their C functions [PATCH] x86_64: Standardize i386/x86_64 handling of NMI_VECTOR [PATCH] x86_64: Fix modular pc speaker [PATCH] x86_64: remove sys32_ni_syscall() [PATCH] x86_64: Do not use -ffunction-sections for modules [PATCH] x86_64: Add cpu_relax to apic_wait_icr_idle [PATCH] x86_64: adjust kstack_depth_to_print default [PATCH] i386/x86-64: adjust /proc/interrupts column headings [PATCH] x86_64: Fix race in cpu_local_* on preemptible kernels [PATCH] x86_64: Fix fast check in safe_smp_processor_id [PATCH] x86_64: x86_64 setup.c - printing cmp related boottime information [PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status ... Manual resolve of trivial conflict in arch/i386/kernel/Makefile
| * [PATCH] i386/x86-64/ia64: Move polling flag into thread_info_statusAndi Kleen2006-06-261-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During some profiling I noticed that default_idle causes a lot of memory traffic. I think that is caused by the atomic operations to clear/set the polling flag in thread_info. There is actually no reason to make this atomic - only the idle thread does it to itself, other CPUs only read it. So I moved it into ti->status. Converted i386/x86-64/ia64 for now because that was the easiest way to fix ACPI which also manipulates these flags in its idle function. Cc: Nick Piggin <npiggin@novell.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] sched: fix SCHED_FIFO bug in sys_sched_rr_get_interval()Peter Williams2006-06-261-1/+1
|/ | | | | | | | | | | | | | | The introduction of SCHED_BATCH scheduling class with a value of 3 means that the expression (p->policy & SCHED_FIFO) will return true if policy is SCHED_BATCH or SCHED_FIFO. Unfortunately, this expression is used in sys_sched_rr_get_interval() and in the absence of a comment to say that this is intentional I presume that it is unintentional and erroneous. The fix is to change the expression to (p->policy == SCHED_FIFO). Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpu hotplug: fix CPU_UP_CANCEL handlingHeiko Carstens2006-06-251-0/+2
| | | | | | | | | | | | | | If a cpu hotplug callback fails on CPU_UP_PREPARE, all callbacks will be called with CPU_UP_CANCELED. A few of these callbacks assume that on CPU_UP_PREPARE a pointer to task has been stored in a percpu array. This assumption is not true if CPU_UP_PREPARE fails and the following calls to kthread_bind() in CPU_UP_CANCELED will cause an addressing exception because of passing a NULL pointer. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Define __raw_get_cpu_var and use itPaul Mackerras2006-06-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | There are several instances of per_cpu(foo, raw_smp_processor_id()), which is semantically equivalent to __get_cpu_var(foo) but without the warning that smp_processor_id() can give if CONFIG_DEBUG_PREEMPT is enabled. For those architectures with optimized per-cpu implementations, namely ia64, powerpc, s390, sparc64 and x86_64, per_cpu() turns into more and slower code than __get_cpu_var(), so it would be preferable to use __get_cpu_var on those platforms. This defines a __raw_get_cpu_var(x) macro which turns into per_cpu(x, raw_smp_processor_id()) on architectures that use the generic per-cpu implementation, and turns into __get_cpu_var(x) on the architectures that have an optimized per-cpu implementation. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cond_resched() might_sleep() fixIngo Molnar2006-06-231-0/+3
| | | | | | | | add the __might_sleep() check back to cond_resched(). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] SELinux: add security hooks to {get,set}affinityDavid Quigley2006-06-231-1/+8
| | | | | | | | | | | | This patch adds LSM hooks into the setaffinity and getaffinity functions to enable security modules to control these operations between tasks with task_setscheduler and task_getscheduler LSM hooks. Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Revert "[PATCH] sched: fix interactive task starvation"Linus Torvalds2006-05-211-44/+18
| | | | | | | | | | | | | | | | | | | This reverts commit 5ce74abe788a26698876e66b9c9ce7e7acc25413 (and its dependent commit 8a5bc075b8d8cf7a87b3f08fad2fba0f5d13295e), because of audio underruns. Reported by Rene Herman <rene.herman@keyaccess.nl>, who also pinpointed the exact cause of the underruns: "Audio underruns galore, with only ogg123 and firefox (browsing the GIT tree online is also a nice trigger by the way). If I back it out, everything is fine for me again." Cc: Rene Herman <rene.herman@keyaccess.nl> Cc: Mike Galbraith <efault@gmx.de> Acked-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Remove __devinitdata from notifier block definitionsChandra Seetharaman2006-04-261-1/+1
| | | | | | | | | | | | | | | | Few of the notifier_chain_register() callers use __devinitdata in the definition of notifier_block data structure. It is incorrect as the data structure should be available after the initializations (they do not unregister them during initializations). This was leading to an oops when notifier_chain_register() call is invoked for those callback chains after initialization. This patch fixes all such usages to _not_ have the notifier_block data structure in the init data section. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: don't awaken RT tasks on expired arrayMike Galbraith2006-04-111-1/+1
| | | | | | | | | | | RT tasks are being awakened on the expired array when expired_starving() is true, whereas they really should be excluded. Fix. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: fix interactive task starvationMike Galbraith2006-04-111-18/+44
| | | | | | | | | | | | | | | | | | | | Fix a starvation problem that occurs when a stream of highly interactive tasks delay an array switch for extended periods despite EXPIRED_STARVING(rq) being true. AFAIKT, the only choice is to enqueue awakening tasks on the expired array in this case. Without this patch, it can be nearly impossible to remotely login to a busy server, and interactive shell commands can starve for minutes. Also, convert the EXPIRED_STARVING macro into an inline function which humans can understand. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: activate SCHED BATCH expiredCon Kolivas2006-03-311-3/+7
| | | | | | | | | | | To increase the strength of SCHED_BATCH as a scheduling hint we can activate batch tasks on the expired array since by definition they are latency insensitive tasks. Signed-off-by: Con Kolivas <kernel@kolivas.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud