summaryrefslogtreecommitdiffstats
path: root/kernel/sched.c
Commit message (Collapse)AuthorAgeFilesLines
* sched: fix memory leak in a failure pathLi Zefan2008-11-071-0/+1
| | | | | | | | | | | Impact: fix rare memory leak in the sched-domains manual reconfiguration code In the failure path, rd is not attached to a sched domain, so it causes a leak. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* sched: fix a bug in sched domain degenerateLi Zefan2008-11-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Impact: re-add incorrectly eliminated sched domain layers (1) on i386 with SCHED_SMT and SCHED_MC enabled # mount -t cgroup -o cpuset xxx /mnt # echo 0 > /mnt/cpuset.sched_load_balance # mkdir /mnt/0 # echo 0 > /mnt/0/cpuset.cpus # dmesg CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 (2) on i386 with SCHED_MC enabled but SCHED_SMT disabled # same with (1) # dmesg CPU0 attaching NULL sched-domain. The bug is that some sched domains may be skipped unintentionally when degenerating (optimizing) sched domains. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* sched: backward looking buddyPeter Zijlstra2008-11-051-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: improve/change/fix wakeup-buddy scheduling Currently we only have a forward looking buddy, that is, we prefer to schedule to the task we last woke up, under the presumption that its going to consume the data we just produced, and therefore will have cache hot benefits. This allows co-waking producer/consumer task pairs to run ahead of the pack for a little while, keeping their cache warm. Without this, we would interleave all pairs, utterly trashing the cache. This patch introduces a backward looking buddy, that is, suppose that in the above scenario, the consumer preempts the producer before it can go to sleep, we will therefore miss the wakeup from consumer to producer (its already running, after all), breaking the cycle and reverting to the cache-trashing interleaved schedule pattern. The backward buddy will try to schedule back to the task that woke us up in case the forward buddy is not available, under the assumption that the last task will be the one with the most cache hot task around barring current. This will basically allow a task to continue after it got preempted. In order to avoid starvation, we allow either buddy to get wakeup_gran ahead of the pack. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* sched: virtual time buddy preemptionPeter Zijlstra2008-10-241-1/+0
| | | | | | | | | | | | | | | | | Since we moved wakeup preemption back to virtual time, it makes sense to move the buddy stuff back as well. The purpose of the buddy scheduling is to allow a quickly scheduling pair of tasks to run away from the group as far as a regular busy task would be allowed under wakeup preemption. This has the advantage that the pair can ping-pong for a while, enjoying cache-hotness. Without buddy scheduling other tasks would interleave destroying the cache. Also, it saves a word in cfs_rq. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* sched: fix a find_busiest_group bugletPeter Zijlstra2008-10-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | In one of the group load balancer patches: commit 408ed066b11cf9ee4536573b4269ee3613bd735e Author: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Fri Jun 27 13:41:28 2008 +0200 Subject: sched: hierarchical load vs find_busiest_group The following change: - if (max_load - this_load + SCHED_LOAD_SCALE_FUZZ >= + if (max_load - this_load + 2*busiest_load_per_task >= busiest_load_per_task * imbn) { made the condition always true, because imbn is [1,2]. Therefore, remove the 2*, and give the it a fair chance. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'proc' of ↵Linus Torvalds2008-10-231-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc * 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: (35 commits) proc: remove fs/proc/proc_misc.c proc: move /proc/vmcore creation to fs/proc/vmcore.c proc: move pagecount stuff to fs/proc/page.c proc: move all /proc/kcore stuff to fs/proc/kcore.c proc: move /proc/schedstat boilerplate to kernel/sched_stats.h proc: move /proc/modules boilerplate to kernel/module.c proc: move /proc/diskstats boilerplate to block/genhd.c proc: move /proc/zoneinfo boilerplate to mm/vmstat.c proc: move /proc/vmstat boilerplate to mm/vmstat.c proc: move /proc/pagetypeinfo boilerplate to mm/vmstat.c proc: move /proc/buddyinfo boilerplate to mm/vmstat.c proc: move /proc/vmallocinfo to mm/vmalloc.c proc: move /proc/slabinfo boilerplate to mm/slub.c, mm/slab.c proc: move /proc/slab_allocators boilerplate to mm/slab.c proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.c proc: move /proc/stat to fs/proc/stat.c proc: move rest of /proc/partitions code to block/genhd.c proc: move /proc/cpuinfo code to fs/proc/cpuinfo.c proc: move /proc/devices code to fs/proc/devices.c proc: move rest of /proc/locks to fs/locks.c ...
| * proc: move /proc/schedstat boilerplate to kernel/sched_stats.hAlexey Dobriyan2008-10-231-0/+1
| | | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* | Merge branch 'v28-range-hrtimers-for-linus-v2' of ↵Linus Torvalds2008-10-231-4/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) hrtimers: add missing docbook comments to struct hrtimer hrtimers: simplify hrtimer_peek_ahead_timers() hrtimers: fix docbook comments DECLARE_PER_CPU needs linux/percpu.h hrtimers: fix typo rangetimers: fix the bug reported by Ingo for real rangetimer: fix BUG_ON reported by Ingo rangetimer: fix x86 build failure for the !HRTIMERS case select: fix alpha OSF wrapper select: fix alpha OSF wrapper hrtimer: peek at the timer queue just before going idle hrtimer: make the futex() system call use the per process slack value hrtimer: make the nanosleep() syscall use the per process slack hrtimer: fix signed/unsigned bug in slack estimator hrtimer: show the timer ranges in /proc/timer_list hrtimer: incorporate feedback from Peter Zijlstra hrtimer: add a hrtimer_start_range() function hrtimer: another build fix hrtimer: fix build bug found by Ingo hrtimer: make select() and poll() use the hrtimer range feature ...
| * \ Merge branch 'timers/range-hrtimers' into v28-range-hrtimers-for-linus-v2Thomas Gleixner2008-10-221-4/+3
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | Conflicts: kernel/time/tick-sched.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| | * Merge commit 'linus/master' into merge-linusArjan van de Ven2008-10-171-146/+262
| | |\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/kvm/i8254.c
| | * | hrtimer: convert kernel/* to the new hrtimer apisArjan van de Ven2008-09-051-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to be able to do range hrtimers we need to use accessor functions to the "expire" member of the hrtimer struct. This patch converts kernel/* to these accessors. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
* | | | Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds2008-10-231-25/+26
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: disable the hrtick for now sched: revert back to per-rq vruntime sched: fair scheduler should not resched rt tasks sched: optimize group load balancer sched: minor fast-path overhead reduction sched: fix the wrong mask_len, cleanup sched: kill unused scheduler decl. sched: fix the wrong mask_len sched: only update rq->clock while holding rq->lock
| * | | sched: optimize group load balancerPeter Zijlstra2008-10-201-20/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that tg_shares_up() unconditionally takes rq-locks for all cpus in the sched_domain. This hurts. We need the rq-locks whenever we change the weight of the per-cpu group sched entities. To allevate this a little, only change the weight when the new weight is at least shares_thresh away from the old value. This avoids the rq-lock for the top level entries, since those will never be re-weighted, and fuzzes the lower level entries a little to gain performance in semi-stable situations. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | sched: only update rq->clock while holding rq->lockPeter Zijlstra2008-10-151-5/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vatsa noticed rq->clock going funny and tracked it down to an update_rq_clock() outside a rq->lock section. This is a problem because things like double_rq_lock() update the rq->clock value for both rqs. Therefore disabling interrupts isn't strong enough. Reported-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge branch 'tracing-v28-for-linus' of ↵Linus Torvalds2008-10-201-11/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits) tracing/fastboot: improve help text tracing/stacktrace: improve help text tracing/fastboot: fix initcalls disposition in bootgraph.pl tracing/fastboot: fix bootgraph.pl initcall name regexp tracing/fastboot: fix issues and improve output of bootgraph.pl tracepoints: synchronize unregister static inline tracepoints: tracepoint_synchronize_unregister() ftrace: make ftrace_test_p6nop disassembler-friendly markers: fix synchronize marker unregister static inline tracing/fastboot: add better resolution to initcall debug/tracing trace: add build-time check to avoid overrunning hex buffer ftrace: fix hex output mode of ftrace tracing/fastboot: fix initcalls disposition in bootgraph.pl tracing/fastboot: fix printk format typo in boot tracer ftrace: return an error when setting a nonexistent tracer ftrace: make some tracers reentrant ring-buffer: make reentrant ring-buffer: move page indexes into page headers tracing/fastboot: only trace non-module initcalls ftrace: move pc counter in irqtrace ... Manually fix conflicts: - init/main.c: initcall tracing - kernel/module.c: verbose level vs tracepoints - scripts/bootgraph.pl: fallout from cherry-picking commits.
| * | | tracing, sched: LTTng instrumentation - schedulerMathieu Desnoyers2008-10-141-11/+6
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instrument the scheduler activity (sched_switch, migration, wakeups, wait for a task, signal delivery) and process/thread creation/destruction (fork, exit, kthread stop). Actually, kthread creation is not instrumented in this patch because it is architecture dependent. It allows to connect tracers such as ftrace which detects scheduling latencies, good/bad scheduler decisions. Tools like LTTng can export this scheduler information along with instrumentation of the rest of the kernel activity to perform post-mortem analysis on the scheduler activity. About the performance impact of tracepoints (which is comparable to markers), even without immediate values optimizations, tests done by Hideo Aoki on ia64 show no regression. His test case was using hackbench on a kernel where scheduler instrumentation (about 5 events in code scheduler code) was added. See the "Tracepoints" patch header for performance result detail. Changelog : - Change instrumentation location and parameter to match ftrace instrumentation, previously done with kernel markers. [ mingo@elte.hu: conflict resolutions ] Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: 'Peter Zijlstra' <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | |
| \ \
| \ \
| \ \
*---. \ \ Merge branches 'timers/clocksource', 'timers/hrtimers', 'timers/nohz', ↵Thomas Gleixner2008-10-201-152/+334
|\ \ \ \ \ | | |_|/ / | |/| | / | | | |/ | | |/| 'timers/ntp', 'timers/posixtimers' and 'timers/debug' into v28-timers-for-linus
| | | * timers: fix itimer/many thread hang, fixIngo Molnar2008-09-301-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | fix bogus rq dereference: v3 removed the locking but also removed the rq initialization. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | * timers: fix itimer/many thread hang, v3Frank Mayhar2008-09-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - fix UP lockup - another set of UP/SMP cleanups and simplifications Signed-off-by: Frank Mayhar <fmayhar@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | * timers: fix itimer/many thread hang, v2Frank Mayhar2008-09-231-40/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the second resubmission of the posix timer rework patch, posted a few days ago. This includes the changes from the previous resubmittion, which addressed Oleg Nesterov's comments, removing the RCU stuff from the patch and un-inlining the thread_group_cputime() function for SMP. In addition, per Ingo Molnar it simplifies the UP code, consolidating much of it with the SMP version and depending on lower-level SMP/UP handling to take care of the differences. It also cleans up some UP compile errors, moves the scheduler stats-related macros into kernel/sched_stats.h, cleans up a merge error in kernel/fork.c and has a few other minor fixes and cleanups as suggested by Oleg and Ingo. Thanks for the review, guys. Signed-off-by: Frank Mayhar <fmayhar@google.com> Cc: Roland McGrath <roland@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | * timers: fix itimer/many thread hangFrank Mayhar2008-09-141-8/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Overview This patch reworks the handling of POSIX CPU timers, including the ITIMER_PROF, ITIMER_VIRT timers and rlimit handling. It was put together with the help of Roland McGrath, the owner and original writer of this code. The problem we ran into, and the reason for this rework, has to do with using a profiling timer in a process with a large number of threads. It appears that the performance of the old implementation of run_posix_cpu_timers() was at least O(n*3) (where "n" is the number of threads in a process) or worse. Everything is fine with an increasing number of threads until the time taken for that routine to run becomes the same as or greater than the tick time, at which point things degrade rather quickly. This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF." Code Changes This rework corrects the implementation of run_posix_cpu_timers() to make it run in constant time for a particular machine. (Performance may vary between one machine and another depending upon whether the kernel is built as single- or multiprocessor and, in the latter case, depending upon the number of running processors.) To do this, at each tick we now update fields in signal_struct as well as task_struct. The run_posix_cpu_timers() function uses those fields to make its decisions. We define a new structure, "task_cputime," to contain user, system and scheduler times and use these in appropriate places: struct task_cputime { cputime_t utime; cputime_t stime; unsigned long long sum_exec_runtime; }; This is included in the structure "thread_group_cputime," which is a new substructure of signal_struct and which varies for uniprocessor versus multiprocessor kernels. For uniprocessor kernels, it uses "task_cputime" as a simple substructure, while for multiprocessor kernels it is a pointer: struct thread_group_cputime { struct task_cputime totals; }; struct thread_group_cputime { struct task_cputime *totals; }; We also add a new task_cputime substructure directly to signal_struct, to cache the earliest expiration of process-wide timers, and task_cputime also replaces the it_*_expires fields of task_struct (used for earliest expiration of thread timers). The "thread_group_cputime" structure contains process-wide timers that are updated via account_user_time() and friends. In the non-SMP case the structure is a simple aggregator; unfortunately in the SMP case that simplicity was not achievable due to cache-line contention between CPUs (in one measured case performance was actually _worse_ on a 16-cpu system than the same test on a 4-cpu system, due to this contention). For SMP, the thread_group_cputime counters are maintained as a per-cpu structure allocated using alloc_percpu(). The timer functions update only the timer field in the structure corresponding to the running CPU, obtained using per_cpu_ptr(). We define a set of inline functions in sched.h that we use to maintain the thread_group_cputime structure and hide the differences between UP and SMP implementations from the rest of the kernel. The thread_group_cputime_init() function initializes the thread_group_cputime structure for the given task. The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the out-of-line function thread_group_cputime_alloc_smp() to allocate and fill in the per-cpu structures and fields. The thread_group_cputime_free() function, also a no-op for UP, in SMP frees the per-cpu structures. The thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls thread_group_cputime_alloc() if the per-cpu structures haven't yet been allocated. The thread_group_cputime() function fills the task_cputime structure it is passed with the contents of the thread_group_cputime fields; in UP it's that simple but in SMP it must also safely check that tsk->signal is non-NULL (if it is it just uses the appropriate fields of task_struct) and, if so, sums the per-cpu values for each online CPU. Finally, the three functions account_group_user_time(), account_group_system_time() and account_group_exec_runtime() are used by timer functions to update the respective fields of the thread_group_cputime structure. Non-SMP operation is trivial and will not be mentioned further. The per-cpu structure is always allocated when a task creates its first new thread, via a call to thread_group_cputime_clone_thread() from copy_signal(). It is freed at process exit via a call to thread_group_cputime_free() from cleanup_signal(). All functions that formerly summed utime/stime/sum_sched_runtime values from from all threads in the thread group now use thread_group_cputime() to snapshot the values in the thread_group_cputime structure or the values in the task structure itself if the per-cpu structure hasn't been allocated. Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit. The run_posix_cpu_timers() function has been split into a fast path and a slow path; the former safely checks whether there are any expired thread timers and, if not, just returns, while the slow path does the heavy lifting. With the dedicated thread group fields, timers are no longer "rebalanced" and the process_timer_rebalance() function and related code has gone away. All summing loops are gone and all code that used them now uses the thread_group_cputime() inline. When process-wide timers are set, the new task_cputime structure in signal_struct is used to cache the earliest expiration; this is checked in the fast path. Performance The fix appears not to add significant overhead to existing operations. It generally performs the same as the current code except in two cases, one in which it performs slightly worse (Case 5 below) and one in which it performs very significantly better (Case 2 below). Overall it's a wash except in those two cases. I've since done somewhat more involved testing on a dual-core Opteron system. Case 1: With no itimer running, for a test with 100,000 threads, the fixed kernel took 1428.5 seconds, 513 seconds more than the unfixed system, all of which was spent in the system. There were twice as many voluntary context switches with the fix as without it. Case 2: With an itimer running at .01 second ticks and 4000 threads (the most an unmodified kernel can handle), the fixed kernel ran the test in eight percent of the time (5.8 seconds as opposed to 70 seconds) and had better tick accuracy (.012 seconds per tick as opposed to .023 seconds per tick). Case 3: A 4000-thread test with an initial timer tick of .01 second and an interval of 10,000 seconds (i.e. a timer that ticks only once) had very nearly the same performance in both cases: 6.3 seconds elapsed for the fixed kernel versus 5.5 seconds for the unfixed kernel. With fewer threads (eight in these tests), the Case 1 test ran in essentially the same time on both the modified and unmodified kernels (5.2 seconds versus 5.8 seconds). The Case 2 test ran in about the same time as well, 5.9 seconds versus 5.4 seconds but again with much better tick accuracy, .013 seconds per tick versus .025 seconds per tick for the unmodified kernel. Since the fix affected the rlimit code, I also tested soft and hard CPU limits. Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer running), the modified kernel was very slightly favored in that while it killed the process in 19.997 seconds of CPU time (5.002 seconds of wall time), only .003 seconds of that was system time, the rest was user time. The unmodified kernel killed the process in 20.001 seconds of CPU (5.014 seconds of wall time) of which .016 seconds was system time. Really, though, the results were too close to call. The results were essentially the same with no itimer running. Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds (where the hard limit would never be reached) and an itimer running, the modified kernel exhibited worse tick accuracy than the unmodified kernel: .050 seconds/tick versus .028 seconds/tick. Otherwise, performance was almost indistinguishable. With no itimer running this test exhibited virtually identical behavior and times in both cases. In times past I did some limited performance testing. those results are below. On a four-cpu Opteron system without this fix, a sixteen-thread test executed in 3569.991 seconds, of which user was 3568.435s and system was 1.556s. On the same system with the fix, user and elapsed time were about the same, but system time dropped to 0.007 seconds. Performance with eight, four and one thread were comparable. Interestingly, the timer ticks with the fix seemed more accurate: The sixteen-thread test with the fix received 149543 ticks for 0.024 seconds per tick, while the same test without the fix received 58720 for 0.061 seconds per tick. Both cases were configured for an interval of 0.01 seconds. Again, the other tests were comparable. Each thread in this test computed the primes up to 25,000,000. I also did a test with a large number of threads, 100,000 threads, which is impossible without the fix. In this case each thread computed the primes only up to 10,000 (to make the runtime manageable). System time dominated, at 1546.968 seconds out of a total 2176.906 seconds (giving a user time of 629.938s). It received 147651 ticks for 0.015 seconds per tick, still quite accurate. There is obviously no comparable test without the fix. Signed-off-by: Frank Mayhar <fmayhar@google.com> Cc: Roland McGrath <roland@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | sched debug: add name to sched_domain sysctl entriesIngo Molnar2008-10-091-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add /proc/sys/kernel/sched_domain/cpu0/domain0/name, to make it easier to see which specific scheduler domain remained at that entry. Since we process the scheduler domain tree and simplify it, it's not always immediately clear during debugging which domain came from where. depends on CONFIG_SCHED_DEBUG=y. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | sched: remove redundant code in cpu_cgroup_create()Li Zefan2008-10-061-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | css will be initialized by cgroup core. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | Merge branch 'linus' into sched/develIngo Molnar2008-10-061-2/+2
| |\ \ \
| | * | | hrtimer: prevent migration of per CPU hrtimersThomas Gleixner2008-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: per CPU hrtimers can be migrated from a dead CPU The hrtimer code has no knowledge about per CPU timers, but we need to prevent the migration of such timers and warn when such a timer is active at migration time. Explicitely mark the timers as per CPU and use a more understandable mode descriptor for the interrupts safe unlocked callback mode, which is used by hrtimer_sleeper and the scheduler code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | | | sched: more sanity checks on the bandwidth settingsPeter Zijlstra2008-09-231-5/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While playing around with it, I noticed we missed some sanity checks. Also add some comments while we're there. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | | |
| | \ \ \
| *-. \ \ \ Merge branches 'sched/urgent' and 'sched/rt' into sched/develIngo Molnar2008-09-231-96/+121
| |\ \ \ \ \ | | | |/ / / | | |/| | |
| | | * | | sched: compilation fix with gcc 3.4.6Krzysztof Helt2008-09-061-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I found that 2.6.27-rc5-mm1 does not compile with gcc 3.4.6. The error is: CC kernel/sched.o kernel/sched.c: In function `start_rt_bandwidth': kernel/sched.c:208: sorry, unimplemented: inlining failed in call to 'rt_bandwidth_enabled': function body not available kernel/sched.c:214: sorry, unimplemented: called from here make[1]: *** [kernel/sched.o] Error 1 make: *** [kernel] Error 2 It seems that the gcc 3.4.6 requires full inline definition before first usage. The patch below fixes the compilation problem. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> (if needed> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | * | | sched: extract walk_tg_tree(), fixIngo Molnar2008-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix: kernel/sched.c: In function '__rt_schedulable': kernel/sched.c:8771: error: implicit declaration of function 'walk_tg_tree' kernel/sched.c:8771: error: 'tg_nop' undeclared (first use in this function) kernel/sched.c:8771: error: (Each undeclared identifier is reported only once kernel/sched.c:8771: error: for each function it appears in.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | * | | sched: rt-bandwidth fixesPeter Zijlstra2008-08-191-62/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The last patch allows sysctl_sched_rt_runtime to disable bandwidth accounting for the group scheduler - however it doesn't deal with sched_setscheduler(), which will keep tasks out of groups that have no assigned runtime. If we relax this, we get into the situation where RT tasks can get into a group when we disable bandwidth control, and then starve them by enabling it again. Rework the schedulability code to check for this condition and fail to turn on bandwidth control with -EBUSY when this situation is found. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | * | | sched: extract walk_tg_tree()Peter Zijlstra2008-08-191-33/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extract walk_tg_tree() and make it a little more generic so we can use it in the schedulablity test. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | | * | | sched: rt-bandwidth group disable fixesPeter Zijlstra2008-08-191-1/+8
| |_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | More extensive disable of bandwidth control. It allows sysctl_sched_rt_runtime to disable full group bandwidth control. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | * | | sched: fix init_hrtick() section mismatch warningRakib Mullick2008-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LD kernel/built-in.o WARNING: kernel/built-in.o(.text+0x326): Section mismatch in reference from the function init_hrtick() to the variable .cpuinit.data:hotplug_hrtick_nb.8 The function init_hrtick() references the variable __cpuinitdata hotplug_hrtick_nb.8. This is often because init_hrtick lacks a __cpuinitdata annotation or the annotation of hotplug_hrtick_nb.8 is wrong. Signed-off-by: Md.Rakib H. Mullick <rakib.mullick@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | * | | sched: fix deadlock in setting scheduler parameter to zeroHiroshi Shimamoto2008-09-111-0/+6
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Andrei Gusev wrote: > I played witch scheduler settings. After doing something like: > echo -n 1000000 >sched_rt_period_us > > command is locked. I found in kernel.log: > > Sep 11 00:39:34 zaratustra > Sep 11 00:39:34 zaratustra Pid: 4495, comm: bash Tainted: G W > (2.6.26.3 #12) > Sep 11 00:39:34 zaratustra EIP: 0060:[<c0213fc7>] EFLAGS: 00210246 CPU: 0 > Sep 11 00:39:34 zaratustra EIP is at div64_u64+0x57/0x80 > Sep 11 00:39:34 zaratustra EAX: 0000389f EBX: 00000000 ECX: 00000000 > EDX: 00000000 > Sep 11 00:39:34 zaratustra ESI: d9800000 EDI: d9800000 EBP: 0000389f > ESP: ea7a6edc > Sep 11 00:39:34 zaratustra DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 > Sep 11 00:39:34 zaratustra Process bash (pid: 4495, ti=ea7a6000 > task=ea744000 task.ti=ea7a6000) > Sep 11 00:39:34 zaratustra Stack: 00000000 000003e8 d9800000 0000389f > c0119042 00000000 00000000 00000001 > Sep 11 00:39:34 zaratustra 00000000 00000000 ea7a6f54 00010000 00000000 > c04d2e80 00000001 000e7ef0 > Sep 11 00:39:34 zaratustra c01191a3 00000000 00000000 ea7a6fa0 00000001 > ffffffff c04d2e80 ea5b2480 > Sep 11 00:39:34 zaratustra Call Trace: > Sep 11 00:39:34 zaratustra [<c0119042>] __rt_schedulable+0x52/0x130 > Sep 11 00:39:34 zaratustra [<c01191a3>] sched_rt_handler+0x83/0x120 > Sep 11 00:39:34 zaratustra [<c01a76a6>] proc_sys_call_handler+0xb6/0xd0 > Sep 11 00:39:34 zaratustra [<c01a76c0>] proc_sys_write+0x0/0x20 > Sep 11 00:39:34 zaratustra [<c01a76d9>] proc_sys_write+0x19/0x20 > Sep 11 00:39:34 zaratustra [<c016cc68>] vfs_write+0xa8/0x140 > Sep 11 00:39:34 zaratustra [<c016cdd1>] sys_write+0x41/0x80 > Sep 11 00:39:34 zaratustra [<c0103051>] sysenter_past_esp+0x6a/0x91 > Sep 11 00:39:34 zaratustra ======================= > Sep 11 00:39:34 zaratustra Code: c8 41 0f ad f3 d3 ee f6 c1 20 0f 45 de > 31 f6 0f ad ef d3 ed f6 c1 20 0f 45 fd 0f 45 ee 31 c9 39 eb 89 fe 89 ea > 77 08 89 e8 31 d2 <f7> f3 89 c1 89 f0 8b 7c 24 08 f7 f3 8b 74 24 04 89 > ca 8b 1c 24 > Sep 11 00:39:34 zaratustra EIP: [<c0213fc7>] div64_u64+0x57/0x80 SS:ESP > 0068:ea7a6edc > Sep 11 00:39:34 zaratustra ---[ end trace 4eaa2a86a8e2da22 ]--- fix the boundary condition. sysctl_sched_rt_period=0 makes exception at to_ratio(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | sched: clarify ifdef tangleAndrew Morton2008-09-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add some comments to try to make the ifdef puzzle a bit clearer - Explicitly inline one of the three init_hrtick() implementations. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | sched: wakeup preempt when small overlapPeter Zijlstra2008-09-221-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lin Ming reported a 10% OLTP regression against 2.6.27-rc4. The difference seems to come from different preemption agressiveness, which affects the cache footprint of the workload and its effective cache trashing. Aggresively preempt a task if its avg overlap is very small, this should avoid the task going to sleep and find it still running when we schedule back to it - saving a wakeup. Reported-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | Merge commit 'v2.6.27-rc6' into sched/develIngo Molnar2008-09-111-6/+13
| |\ \ \ | | |/ /
| | * | Merge branch 'sched/cpuset' into sched/urgentIngo Molnar2008-09-061-6/+13
| | |\ \ | | | |/ | | |/|
| | | * sched: arch_reinit_sched_domains() must destroy domains to force rebuildMax Krasnyansky2008-09-061-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | What I realized recently is that calling rebuild_sched_domains() in arch_reinit_sched_domains() by itself is not enough when cpusets are enabled. partition_sched_domains() code is trying to avoid unnecessary domain rebuilds and will not actually rebuild anything if new domain masks match the old ones. What this means is that doing echo 1 > /sys/devices/system/cpu/sched_mc_power_savings on a system with cpusets enabled will not take affect untill something changes in the cpuset setup (ie new sets created or deleted). This patch fixes restore correct behaviour where domains must be rebuilt in order to enable MC powersaving flags. Test on quad-core Core2 box with both CONFIG_CPUSETS and !CONFIG_CPUSETS. Also tested on dual-core Core2 laptop. Lockdep is happy and things are working as expected. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Tested-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | Merge branch 'linus' into sched/develIngo Molnar2008-09-061-0/+59
| |\ \ \ | | |/ /
| | * | sched: fix process time monotonicityBalbir Singh2008-09-051-0/+59
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Spencer reported a problem where utime and stime were going negative despite the fixes in commit b27f03d4bdc145a09fb7b0c0e004b29f1ee555fa. The suspected reason for the problem is that signal_struct maintains it's own utime and stime (of exited tasks), these are not updated using the new task_utime() routine, hence sig->utime can go backwards and cause the same problem to occur (sig->utime, adds tsk->utime and not task_utime()). This patch fixes the problem TODO: using max(task->prev_utime, derived utime) works for now, but a more generic solution is to implement cputime_max() and use the cputime_gt() function for comparison. Reported-by: spencer@bluehost.com Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | sched: clean up __might_sleep()Ingo Molnar2008-08-281-14/+19
| | | | | | | | | | | | | | | | | | add KERN_ to the printout and clean up the flow a bit. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | make might_sleep() display the oopsing processJoe Korty2008-08-281-2/+2
| | | | | | | | | | | | | | | | | | | | | Expand might_sleep's printk to indicate the oopsing process. Signed-off-by: Joe Korty <joe.korty@ccur.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | sched: add kernel doc for the completion, fix kernel-doc-nano-HOWTO.txtKevin Diggs2008-08-261-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds kernel doc for the completion feature. An error in the split-man.pl PERL snippet in kernel-doc-nano-HOWTO.txt is also fixed. Signed-off-by: Kevin Diggs <kevdig@hypersurf.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | Merge branch 'linus' into sched/develIngo Molnar2008-08-261-3/+51
| |\ \ | |/ / |/| |
| * | wait_task_inactive: "improve" the returned value for ->nvcsw == 0Oleg Nesterov2008-08-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_task_inactive() returns 1 when p->nvcsw == 0 || p->nvcsw == 1. This means that two subsequent calls can return the same number while the task was scheduled in between. Change the code to return "nvcsw | LONG_MIN" instead of "nvcsw ?: 1", now the overlap always needs LONG_MAX schedules. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | wait_task_inactive(): don't consider task->nivcswOleg Nesterov2008-08-221-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If wait_task_inactive() returns success the task was deactivated. In that case schedule() always increments ->nvcsw which alone can be used as a "generation counter". If the next call returns the same number, we can be sure that the task was unscheduled. Otherwise, because we know that .on_rq == 0 again, ->nvcsw should have been changed in between. Q: perhaps it is better to do "ncsw = (p->nvcsw << 1) | 1" ? This decreases the possibility of "was it unscheduled" false positive when ->nvcsw == 0. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | sched: do_wait_for_common: use signal_pending_state()Oleg Nesterov2008-08-221-4/+1
| |/ | | | | | | | | | | | | | | | | Change do_wait_for_common() to use signal_pending_state() instead of open coding. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds2008-08-161-3/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: scale sysctl_sched_shares_ratelimit with nr_cpus sched: fix rt-bandwidth hotplug race sched: fix the race between walk_tg_tree and sched_create_group
| * | sched: scale sysctl_sched_shares_ratelimit with nr_cpusPeter Zijlstra2008-08-151-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | David reported that his Niagra spend a little too much time in tg_shares_up(), which considering he has a large cpu count makes sense. So scale the ratelimit value with the number of cpus like we do for other controls as well. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
OpenPOWER on IntegriCloud