summaryrefslogtreecommitdiffstats
path: root/kernel/rcutree.c
Commit message (Collapse)AuthorAgeFilesLines
* rcu: Stop spurious warnings from synchronize_sched_expeditedHugh Dickins2012-02-211-1/+1
| | | | | | | | | | | | | | | | | | | synchronize_sched_expedited() is spamming CONFIG_DEBUG_PREEMPT=y users with an unintended warning from the cpu_is_offline() check: use raw_smp_processor_id() instead of smp_processor_id() there. Because the warning is under a get_online_cpus(), it is not possible for any CPUs to go offline, though it is quite possible that the task might migrate between the raw_smp_processor_id() and the check of cpu_is_offline(). This is not a problem because the task cannot migrate from an offline CPU to an online one or vice versa. The point of the check is to verify that synchronize_sched_expedited() is not called from an offline CPU, for example, from a CPU_DYING notifier, or, more important, from an outgoing CPU making its way from its CPU_DYING notifiers to the idle loop. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Add RCU_NONIDLE() for idle-loop RCU read-side critical sectionsPaul E. McKenney2012-02-211-0/+2
| | | | | | | | | | | | | | | | | RCU, RCU-bh, and RCU-sched read-side critical sections are forbidden in the inner idle loop, that is, between the rcu_idle_enter() and the rcu_idle_exit() -- RCU will happily ignore any such read-side critical sections. However, things like powertop need tracepoints in the inner idle loop. This commit therefore provides an RCU_NONIDLE() macro that can be used to wrap code in the idle loop that requires RCU read-side critical sections. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
* rcu: Allow nesting of rcu_idle_enter() and rcu_idle_exit()Paul E. McKenney2012-02-211-7/+14
| | | | | | | | | | | | | | | | | | | | | Use of RCU in the idle loop is incorrect, quite a few instances of just that have made their way into mainline, primarily event tracing. The problem with RCU read-side critical sections on CPUs that RCU believes to be idle is that RCU is completely ignoring the CPU, along with any attempts and RCU read-side critical sections. The approaches of eliminating the offending uses and of pushing the definition of idle down beyond the offending uses have both proved impractical. The new approach is to encapsulate offending uses of RCU with rcu_idle_exit() and rcu_idle_enter(), but this requires nesting for code that is invoked both during idle and and during normal execution. Therefore, this commit modifies rcu_idle_enter() and rcu_idle_exit() to permit nesting. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
* rcu: Call out dangers of expedited RCU primitivesPaul E. McKenney2012-02-211-8/+14
| | | | | | | | The expedited RCU primitives can be quite useful, but they have some high costs as well. This commit updates and creates docbook comments calling out the costs, and updates the RCU documentation as well. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Rework detection of use of RCU by offline CPUsPaul E. McKenney2012-02-211-46/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because newly offlined CPUs continue executing after completing the CPU_DYING notifiers, they legitimately enter the scheduler and use RCU while appearing to be offline. This calls for a more sophisticated approach as follows: 1. RCU marks the CPU online during the CPU_UP_PREPARE phase. 2. RCU marks the CPU offline during the CPU_DEAD phase. 3. Diagnostics regarding use of read-side RCU by offline CPUs use RCU's accounting rather than the cpu_online_map. (Note that __call_rcu() still uses cpu_online_map to detect illegal invocations within CPU_DYING notifiers.) 4. Offline CPUs are prevented from hanging the system by force_quiescent_state(), which pays attention to cpu_online_map. Some additional work (in a later commit) will be needed to guarantee that force_quiescent_state() waits a full jiffy before assuming that a CPU is offline, for example, when called from idle entry. (This commit also makes the one-jiffy wait explicit, since the old-style implicit wait can now be defeated by RCU_FAST_NO_HZ and by rcutorture.) This approach avoids the false positives encountered when attempting to use more exact classification of CPU online/offline state. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Move synchronize_sched_expedited() to rcutree.cPaul E. McKenney2012-02-211-0/+117
| | | | | | | | | | Now that TREE_RCU and TREE_PREEMPT_RCU no longer do anything different for the single-CPU case, there is no need for multiple definitions of synchronize_sched_expedited(). It is no longer in any sense a plug-in, so move it from kernel/rcutree_plugin.h to kernel/rcutree.c. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Check for illegal use of RCU from offlined CPUsPaul E. McKenney2012-02-211-0/+29
| | | | | | | | | | | | | | | | | Although it is legal to use RCU during early boot, it is anything but legal to use RCU at runtime from an offlined CPU. After all, RCU explicitly ignores offlined CPUs. This commit therefore adds checks for runtime use of RCU from offlined CPUs. These checks are not perfect, in particular, they can be subverted through use of things like rcu_dereference_raw(). Note that it is not possible to put checks in rcu_read_lock() and friends due to the fact that these primitives are used in code that might be used under either RCU or lock-based protection, which means that checking rcu_read_lock() gets you fat piles of false positives. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Print scheduling-clock information on RCU CPU stall-warning messagesPaul E. McKenney2012-02-211-11/+22
| | | | | | | | | | | There have been situations where RCU CPU stall warnings were caused by issues in scheduling-clock timer initialization. To make it easier to track these down, this commit causes the RCU CPU stall-warning messages to print out the number of scheduling-clock interrupts taken in the current grace period for each stalled CPU. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Set RCU CPU stall times via sysfsPaul E. McKenney2012-02-211-5/+26
| | | | | | | | | | | | | | The default CONFIG_RCU_CPU_STALL_TIMEOUT value of 60 seconds has served Linux users well for production use for quite some time. However, for debugging, there will be more than three minutes between subsequent stall-warning messages. This can be an annoyingly long wait if you are trying to work out where the offending infinite loop is hiding. Therefore, this commit provides a rcu_cpu_stall_timeout sysfs parameter that may be adjusted at boot time and at runtime to speed up debugging. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Remove #ifdef CONFIG_SMP from TREE_RCUPaul E. McKenney2012-02-211-19/+0
| | | | | | | | | Now that both TINY_RCU and TINY_PREEMPT_RCU have been in place for awhile, it is time to remove UP support from TREE_RCU, which is what this commit does. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Check for idle-loop entry while in RCU read-side critical sectionPaul E. McKenney2012-02-211-0/+11
| | | | | | | | | | | The inner idle loop is an extended quiescent state for all flavors of RCU, but there have been recent bug involving use of RCU read-side primitives from within the idle loop. Therefore, this commit enlists lockdep-RCU to detect attempts to enter the inner idle loop while in an RCU read-side critical section, emitting a lockdep-RCU splat if so. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Clean up straggling rcu_preempt_needs_cpu() namePaul E. McKenney2012-02-211-1/+1
| | | | | | | | | | The recent updates to RCU_CPU_FAST_NO_HZ have an rcu_needs_cpu() that does more than just check for callbacks, so get the name for rcu_preempt_needs_cpu() consistent with that change, now calling it rcu_preempt_cpu_has_callbacks(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Remove single-rcu_node optimization in rcu_start_gp()Paul E. McKenney2012-02-211-18/+0
| | | | | | | | | | | | | | | | The grace-period initialization sequence in rcu_start_gp() has a special case for systems where the rcu_node tree is a single rcu_node structure. This made sense some years ago when systems were smaller and up to 64 CPUs could share a single rcu_node structure, but now that large systems are common and a given leaf rcu_node structure can support only 16 CPUs (due to lock contention on the rcu_node's ->lock field), this optimization is almost never taken. And even the small mobile platforms that might make use of it might rather have the kernel text reduction. Therefore, this commit removes the check for single-rcu_node trees. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* rcu: Don't make callbacks go through second full grace periodPaul E. McKenney2012-02-211-6/+46
| | | | | | | | | | | | | | | | | RCU's current CPU-offline code path dumps all of the outgoing CPU's callbacks onto the RCU_NEXT_TAIL portion of the surviving CPU's callback list. This means that all the ready-to-invoke callbacks from the outgoing CPU must wait for another full RCU grace period. This was just fine when CPU-hotplug events were rare, but there is increasing evidence that users are planning to make increasing use of CPU hotplug. Therefore, this commit changes the callback-dumping procedure so that callbacks that are ready to invoke are moved to the RCU_DONE_TAIL portion of the surviving CPU's callback list. This avoids running these callbacks through a second unnecessary grace period. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Check for callback invocation from offline CPUsPaul E. McKenney2012-02-211-0/+1
| | | | | | | | | | | | | | | Because quiescent states are now reported from offline CPUs in CPU_DYING state, there is some possibility that such a CPU might note the end of a grace period and attempt to start invoking callbacks. This would be a very bad thing, and is supposed to be prevented by the fact that the CPU_DYING CPU gets rid of all its callbacks before reporting the quiescent state. However, there is other CPU-offline code in the kernel, and it is quite possible that someone will invoke RCU core processing from that code. Therefore, this commit adds a warning for this case. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Simplify offline processingPaul E. McKenney2012-02-211-85/+75
| | | | | | | | | | | Move ->qsmaskinit and blkd_tasks[] manipulation to the CPU_DYING notifier. This simplifies the code by eliminating a potential deadlock and by reducing the responsibilities of force_quiescent_state(). Also rename functions to make their connection to the CPU-hotplug stages explicit. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Avoid waking up CPUs having only kfree_rcu() callbacksPaul E. McKenney2012-02-211-11/+18
| | | | | | | | | | | | | | | | When CONFIG_RCU_FAST_NO_HZ is enabled, RCU will allow a given CPU to enter dyntick-idle mode even if it still has RCU callbacks queued. RCU avoids system hangs in this case by scheduling a timer for several jiffies in the future. However, if all of the callbacks on that CPU are from kfree_rcu(), there is no reason to wake the CPU up, as it is not a problem to defer freeing of memory. This commit therefore tracks the number of callbacks on a given CPU that are from kfree_rcu(), and avoids scheduling the timer if all of a given CPU's callbacks are from kfree_rcu(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Add diagnostic for misaligned rcu_head structuresPaul E. McKenney2012-02-211-0/+1
| | | | | | | | | | | | The push for energy efficiency will require that RCU tag rcu_head structures to indicate whether or not their invocation is time critical. This tagging is best carried out in the bottom bits of the ->next pointers in the rcu_head structures. This tagging requires that the rcu_head structures be properly aligned, so this commit adds the required diagnostics. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Add lockdep-RCU checks for simple self-deadlockPaul E. McKenney2012-02-211-0/+8
| | | | | | | | | | It is illegal to have a grace period within a same-flavor RCU read-side critical section, so this commit adds lockdep-RCU checks to splat when such abuse is encountered. This commit does not detect more elaborate RCU deadlock situations. These situations might be a job for lockdep enhancements. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Augment rcu_batch_end tracing for idle and callback statePaul E. McKenney2011-12-111-2/+6
| | | | | | | | | | | | The current rcu_batch_end event trace records only the name of the RCU flavor and the total number of callbacks that remain queued on the current CPU. This is insufficient for testing and tuning the new dyntick-idle RCU_FAST_NO_HZ code, so this commit adds idle state along with whether or not any of the callbacks that were ready to invoke at the beginning of rcu_do_batch() are still queued. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Remove redundant rcu_cpu_stall_suppress declarationPaul E. McKenney2011-12-111-2/+0
| | | | | | | No point in having two identical rcu_cpu_stall_suppress declarations, so remove the more obscure of the two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Keep invoking callbacks if CPU otherwise idlePaul E. McKenney2011-12-111-1/+4
| | | | | | | | | | | | | | | | | | The rcu_do_batch() function that invokes callbacks for TREE_RCU and TREE_PREEMPT_RCU normally throttles callback invocation to avoid degrading scheduling latency. However, as long as the CPU would otherwise be idle, there is no downside to continuing to invoke any callbacks that have passed through their grace periods. In fact, processing such callbacks in a timely manner has the benefit of increasing the probability that the CPU can enter the power-saving dyntick-idle mode. Therefore, this commit allows callback invocation to continue beyond the preset limit as long as the scheduler does not have some other task to run and as long as context is that of the idle task or the relevant RCU kthread. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Irq nesting is always 0 on rcu_enter_idle_commonFrederic Weisbecker2011-12-111-3/+2
| | | | | | | | | | Because tasks don't nest, the ->dyntick_nesting must always be zero upon entry to rcu_idle_enter_common(). Therefore, pass "0" rather than the counter itself. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Don't check irq nesting from rcu idle entry/exitFrederic Weisbecker2011-12-111-10/+8
| | | | | | | | | | | Because tasks do not nest, rcu_idle_enter() and rcu_idle_exit() do not need to check for nesting. This commit therefore moves nesting checks from rcu_idle_enter_common() to rcu_irq_exit() and from rcu_idle_exit_common() to rcu_irq_enter(). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Permit dyntick-idle with callbacks pendingPaul E. McKenney2011-12-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | The current implementation of RCU_FAST_NO_HZ prevents CPUs from entering dyntick-idle state if they have RCU callbacks pending. Unfortunately, this has the side-effect of often preventing them from entering this state, especially if at least one other CPU is not in dyntick-idle state. However, the resulting per-tick wakeup is wasteful in many cases: if the CPU has already fully responded to the current RCU grace period, there will be nothing for it to do until this grace period ends, which will frequently take several jiffies. This commit therefore permits a CPU that has done everything that the current grace period has asked of it (rcu_pending() == 0) even if it still as RCU callbacks pending. However, such a CPU posts a timer to wake it up several jiffies later (6 jiffies, based on experience with grace-period lengths). This wakeup is required to handle situations that can result in all CPUs being in dyntick-idle mode, thus failing to ever complete the current grace period. If a CPU wakes up before the timer goes off, then it cancels that timer, thus avoiding spurious wakeups. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Identify dyntick-idle CPUs on first force_quiescent_state() passPaul E. McKenney2011-12-111-1/+1
| | | | | | | | | Fixes and workarounds for a number of issues (for example, that in df4012edc) make it safe to once again detect dyntick-idle CPUs on the first pass of force_quiescent_state(), so this commit makes that change. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Remove dynticks false positives and RCU failuresPaul E. McKenney2011-12-111-2/+3
| | | | | | | | | | | | | | | | | | | Assertions in rcu_init_percpu_data() unknowingly relied on outgoing CPUs being turned off before reaching the idle loop. Unfortunately, when running under kvm/qemu on x86, CPUs really can get to idle before begin shut off. These CPUs are then born in dyntick-idle mode from an RCU perspective, which results in splats in rcu_init_percpu_data() and in RCU wrongly ignoring those CPUs despite them being active. This in turn can cause RCU to end grace periods prematurely, potentially freeing up memory that the newly onlined CPUs were still using. This is most decidedly not what we need to see in an RCU implementation. This commit therefore replaces the assertions in rcu_init_percpu_data() with code that forces RCU's dyntick-idle view of newly onlined CPUs to match reality. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Eliminate RCU_FAST_NO_HZ grace-period hangPaul E. McKenney2011-12-111-2/+0
| | | | | | | | | | | | | | | | | | | | | | With the new implementation of RCU_FAST_NO_HZ, it was possible to hang RCU grace periods as follows: o CPU 0 attempts to go idle, cycles several times through the rcu_prepare_for_idle() loop, then goes dyntick-idle when RCU needs nothing more from it, while still having at least on RCU callback pending. o CPU 1 goes idle with no callbacks. Both CPUs can then stay in dyntick-idle mode indefinitely, preventing the RCU grace period from ever completing, possibly hanging the system. This commit therefore prevents CPUs that have RCU callbacks from entering dyntick-idle mode. This approach also eliminates the need for the end-of-grace-period IPIs used previously. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Make RCU use the new is_idle_task() APIPaul E. McKenney2011-12-111-2/+2
| | | | | | | | Change from direct comparison of ->pid with zero to is_idle_task(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* rcu: Fix idle-task checksPaul E. McKenney2011-12-111-2/+2
| | | | | | | | | | | | | | | | | | | RCU has traditionally relied on idle_cpu() to determine whether a given CPU is running in the context of an idle task, but commit 908a3283 (Fix idle_cpu()) has invalidated this approach. After commit 908a3283, idle_cpu() will return true if the current CPU is currently running the idle task, and will be doing so for the foreseeable future. RCU instead needs to know whether or not the current CPU is currently running the idle task, regardless of what the near future might bring. This commit therefore switches from idle_cpu() to "current->pid != 0". Reported-by: Wu Fengguang <fengguang.wu@intel.com> Suggested-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Allow dyntick-idle mode for CPUs with callbacksPaul E. McKenney2011-12-111-1/+4
| | | | | | | | | | | | | | Currently, RCU does not permit a CPU to enter dyntick-idle mode if that CPU has any RCU callbacks queued. This means that workloads for which each CPU wakes up and does some RCU updates every few ticks will never enter dyntick-idle mode. This can result in significant unnecessary power consumption, so this patch permits a given to enter dyntick-idle mode if it has callbacks, but only if that same CPU has completed all current work for the RCU core. We determine use rcu_pending() to determine whether a given CPU has completed all current work for the RCU core. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Add more information to the wrong-idle-task complaintPaul E. McKenney2011-12-111-2/+10
| | | | | | | | | The current code just complains if the current task is not the idle task. This commit therefore adds printing of the identity of the idle task. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* rcu: Deconfuse dynticks entry-exit tracingPaul E. McKenney2011-12-111-15/+20
| | | | | | | | | | | | | The trace_rcu_dyntick() trace event did not print both the old and the new value of the nesting level, and furthermore printed only the low-order 32 bits of it. This could result in some confusion when interpreting trace-event dumps, so this commit prints both the old and the new value, prints the full 64 bits, and also selects the process-entry/exit increment to print nicely in hexadecimal. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* rcu: Detect illegal rcu dereference in extended quiescent stateFrederic Weisbecker2011-12-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Report that none of the rcu read lock maps are held while in an RCU extended quiescent state (the section between rcu_idle_enter() and rcu_idle_exit()). This helps detect any use of rcu_dereference() and friends from within the section in idle where RCU is not allowed. This way we can guarantee an extended quiescent window where the CPU can be put in dyntick idle mode or can simply aoid to be part of any global grace period completion while in the idle loop. Uses of RCU from such mode are totally ignored by RCU, hence the importance of these checks. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* rcu: Omit self-awaken when setting up expedited grace periodThomas Gleixner2011-12-111-1/+1
| | | | | | | | When setting up an expedited grace period, if there were no readers, the task will awaken itself. This commit removes this useless self-awakening. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Disable preemption in rcu_is_cpu_idle()Paul E. McKenney2011-12-111-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because rcu_is_cpu_idle() is to be used to check for extended quiescent states in RCU-preempt read-side critical sections, it cannot assume that preemption is disabled. And preemption must be disabled when accessing the dyntick-idle state, because otherwise the following sequence of events could occur: 1. Task A on CPU 1 enters rcu_is_cpu_idle() and picks up the pointer to CPU 1's per-CPU variables. 2. Task B preempts Task A and starts running on CPU 1. 3. Task A migrates to CPU 2. 4. Task B blocks, leaving CPU 1 idle. 5. Task A continues execution on CPU 2, accessing CPU 1's dyntick-idle information using the pointer fetched in step 1 above, and finds that CPU 1 is idle. 6. Task A therefore incorrectly concludes that it is executing in an extended quiescent state, possibly issuing a spurious splat. Therefore, this commit disables preemption within the rcu_is_cpu_idle() function. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* rcu: Track idleness independent of idle tasksPaul E. McKenney2011-12-111-67/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier versions of RCU used the scheduling-clock tick to detect idleness by checking for the idle task, but handled idleness differently for CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side critical sections in the idle task, for example, for tracing. A more fine-grained detection of idleness is therefore required. This commit presses the old dyntick-idle code into full-time service, so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is always invoked at the beginning of an idle loop iteration. Similarly, rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked at the end of an idle-loop iteration. This allows the idle task to use RCU everywhere except between consecutive rcu_idle_enter() and rcu_idle_exit() calls, in turn allowing architecture maintainers to specify exactly where in the idle loop that RCU may be used. Because some of the userspace upcall uses can result in what looks to RCU like half of an interrupt, it is not possible to expect that the irq_enter() and irq_exit() hooks will give exact counts. This patch therefore expands the ->dynticks_nesting counter to 64 bits and uses two separate bitfields to count process/idle transitions and interrupt entry/exit transitions. It is presumed that userspace upcalls do not happen in the idle loop or from usermode execution (though usermode might do a system call that results in an upcall). The counter is hard-reset on each process/idle transition, which avoids the interrupt entry/exit error from accumulating. Overflow is avoided by the 64-bitness of the ->dyntick_nesting counter. This commit also adds warnings if a non-idle task asks RCU to enter idle state (and these checks will need some adjustment before applying Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246). In addition, validation of ->dynticks and ->dynticks_nesting is added. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* rcu: ->signaled better named ->fqs_statePaul E. McKenney2011-12-111-8/+8
| | | | | | | | | | | | The ->signaled field was named before complications in the form of dyntick-idle mode and offlined CPUs. These complications have required that force_quiescent_state() be implemented as a state machine, instead of simply unconditionally sending reschedule IPIs. Therefore, this commit renames ->signaled to ->fqs_state to catch up with the new force_quiescent_state() reality. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* kernel: Map most files to use export.h instead of module.hPaul Gortmaker2011-10-311-1/+1
| | | | | | | | | | | | | | | | The changed files were only including linux/module.h for the EXPORT_SYMBOL infrastructure, and nothing else. Revector them onto the isolated export header for faster compile times. Nothing to see here but a whole lot of instances of: -#include <linux/module.h> +#include <linux/export.h> This commit is only changing the kernel dir; next targets will probably be mm, fs, the arch dirs, etc. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* rcu: Move propagation of ->completed from rcu_start_gp() to rcu_report_qs_rsp()Paul E. McKenney2011-09-281-20/+51
| | | | | | | | | | | | | | | | | | | | | | | | It is possible for the CPU that noted the end of the prior grace period to not need a new one, and therefore to decide to propagate ->completed throughout the rcu_node tree without starting another grace period. However, in so doing, it releases the root rcu_node structure's lock, which can allow some other CPU to start another grace period. The first CPU will be propagating ->completed in parallel with the second CPU initializing the rcu_node tree for the new grace period. In theory this is harmless, but in practice we need to keep things simple. This commit therefore moves the propagation of ->completed to rcu_report_qs_rsp(), and refrains from marking the old grace period as having been completed until it has finished doing this. This prevents anyone from starting a new grace period concurrently with marking the old grace period as having been completed. Of course, the optimization where a CPU needing a new grace period doesn't bother marking the old one completed is still in effect: In that case, the marking happens implicitly as part of initializing the new grace period. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Remove rcu_needs_cpu_flush() to avoid false quiescent statesPaul E. McKenney2011-09-281-3/+0
| | | | | | | | | | | | | | | The purpose of rcu_needs_cpu_flush() was to iterate on pushing the current grace period in order to help the current CPU enter dyntick-idle mode. However, this can result in failures if the CPU starts entering dyntick-idle mode, but then backs out. In this case, the call to rcu_pending() from rcu_needs_cpu_flush() might end up announcing a non-existing quiescent state. This commit therefore removes rcu_needs_cpu_flush() in favor of letting the dyntick-idle machinery at the end of the softirq handler push the loop along via its call to rcu_pending(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Wire up RCU_BOOST_PRIO for rcutreeMike Galbraith2011-09-281-2/+0
| | | | | | | | | | | RCU boost threads start life at RCU_BOOST_PRIO, while others remain at RCU_KTHREAD_PRIO. While here, change thread names to match other kthreads, and adjust rcu_yield() to not override the priority set by the user. This last change sets the stage for runtime changes to priority in the -rt tree. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Avoid having just-onlined CPU resched itself when RCU is idlePaul E. McKenney2011-09-281-3/+8
| | | | | | | | | | | | CPUs set rdp->qs_pending when coming online to resolve races with grace-period start. However, this means that if RCU is idle, the just-onlined CPU might needlessly send itself resched IPIs. Adjust the online-CPU initialization to avoid this, and also to correctly cause the CPU to respond to the current grace period if needed. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Josh Boyer <jwboyer@redhat.com> Tested-by: Christian Hoffmann <email@christianhoffmann.info>
* rcu: Suppress NMI backtraces when stall ends before dumpPaul E. McKenney2011-09-281-4/+9
| | | | | | | | | | | | | It is possible for an RCU CPU stall to end just as it is detected, in which case the current code will uselessly dump all CPU's stacks. This commit therefore checks for this condition and refrains from sending needless NMIs. And yes, the stall might also end just after we checked all CPUs and tasks, but in that case we would at least have given some clue as to which CPU/task was at fault. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Prohibit grace periods during early bootPaul E. McKenney2011-09-281-2/+5
| | | | | | | | | | | | | Greater use of RCU during early boot (before the scheduler is operating) is causing RCU to attempt to start grace periods during that time, which in turn is resulting in both RCU and the callback functions attempting to use the scheduler before it is ready. This commit prevents these problems by prohibiting RCU grace periods until after the scheduler has spawned the first non-idle task. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Prevent early boot set_need_resched() from __rcu_pending()Paul E. McKenney2011-09-281-1/+2
| | | | | | | | | | | There isn't a whole lot of point in poking the scheduler before there are other tasks to switch to. This commit therefore adds a check for rcu_scheduler_fully_active in __rcu_pending() to suppress any pre-scheduler calls to set_need_resched(). The downside of this approach is additional runtime overhead in a reasonably hot code path. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Dump local stack if cannot dump all CPUs' stacksPaul E. McKenney2011-09-281-2/+4
| | | | | | | | | | | | The trigger_all_cpu_backtrace() function is a no-op in architectures that do not define arch_trigger_all_cpu_backtrace. On such architectures, RCU CPU stall warning messages contain no stack trace information, which makes debugging quite difficult. This commit therefore substitutes dump_stack() for architectures that do not define arch_trigger_all_cpu_backtrace, so that at least the local CPU's stack is dumped as part of the RCU CPU stall warning message. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Make rcu_implicit_dynticks_qs() locals be correct sizePaul E. McKenney2011-09-281-5/+5
| | | | | | | | | When the ->dynticks field in the rcu_dynticks structure changed to an atomic_t, its size on 64-bit systems changed from 64 bits to 32 bits. The local variables in rcu_implicit_dynticks_qs() need to change as well, hence this commit. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Eliminate in_irq() checks in rcu_enter_nohz()Paul E. McKenney2011-09-281-7/+0
| | | | | | | | | | The in_irq() check in rcu_enter_nohz() is redundant because if we really are in an interrupt, the attempt to re-enter dyntick-idle mode will invoke rcu_needs_cpu() in any case, which will force the check for RCU callbacks. So this commit removes the check along with the set_need_resched(). Suggested-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
* rcu: Simplify quiescent-state accountingPaul E. McKenney2011-09-281-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is often a delay between the time that a CPU passes through a quiescent state and the time that this quiescent state is reported to the RCU core. It is quite possible that the grace period ended before the quiescent state could be reported, for example, some other CPU might have deduced that this CPU passed through dyntick-idle mode. It is critically important that quiescent state be counted only against the grace period that was in effect at the time that the quiescent state was detected. Previously, this was handled by recording the number of the last grace period to complete when passing through a quiescent state. The RCU core then checks this number against the current value, and rejects the quiescent state if there is a mismatch. However, one additional possibility must be accounted for, namely that the quiescent state was recorded after the prior grace period completed but before the current grace period started. In this case, the RCU core must reject the quiescent state, but the recorded number will match. This is handled when the CPU becomes aware of a new grace period -- at that point, it invalidates any prior quiescent state. This works, but is a bit indirect. The new approach records the current grace period, and the RCU core checks to see (1) that this is still the current grace period and (2) that this grace period has not yet ended. This approach simplifies reasoning about correctness, and this commit changes over to this new approach. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
OpenPOWER on IntegriCloud