summaryrefslogtreecommitdiffstats
path: root/kernel/irq/chip.c
Commit message (Collapse)AuthorAgeFilesLines
* genirq: Add IRQS_PENDING for nested and simple irqNing Jiang2012-05-241-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every interrupt which is an active wakeup source needs the ability to abort suspend if there is a pending irq. Right now only edge and level irqs can do that. | +---------+ | INTC | +---------+ | GPIO_IRQ +------------+ | gpio-exp | +------------+ | | GPIO0_IRQ GPIO1_IRQ In the above diagram, gpio expander has irq number GPIO_IRQ, it is connected with two sub GPIO pins, GPIO0 and GPIO1. During suspend, we set IRQF_NO_SUSPEND for GPIO_IRQ so that gpio expander driver can handle the sub irq GPIO0_IRQ and GPIO1_IRQ, and these two irqs themselves can further be handled by simple or nested irq in some drivers(typically gpio and mfd driver). If they are used as wakeup sources during suspend, we want them to be able to abort suspend too. Setting IRQS_PENDING flag in handle_nested_irq() and handle_simple_irq() when the irq is disabled allows check_wakeup_irqs() to identify such irqs as source for aborting suspend. Signed-off-by: Ning Jiang <ning.n.jiang@gmail.com> Cc: rjw@sisk.pl Link: http://lkml.kernel.org/r/CAH3Oq6T905%2B3fkF43NAMMFvJvq7dsk_so6T2vQ8ZJrA5xiU3YA@mail.gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2012-05-211-1/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq changes from Ingo Molnar: "A collection of small fixes." By Thomas Gleixner * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hexagon: Remove select of not longer existing Kconfig switches arm: Select core options instead of redefining them genirq: Do not consider disabled wakeup irqs genirq: Allow check_wakeup_irqs to notice level-triggered interrupts genirq: Be more informative on irq type mismatch genirq: Reject bogus threaded irq requests genirq: Streamline irq_action
| * genirq: Allow check_wakeup_irqs to notice level-triggered interruptsThomas Gleixner2012-05-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Level triggered interrupts do not cause IRQS_PENDING to be set when they fire while "disabled" as the 'pending' state is always present in the level - they automatically refire where re-enabled. However the IRQS_PENDING flag is also used to abort a suspend cycle - if any 'is_wakeup_set' interrupt is PENDING, check_wakeup_irqs() will cause suspend to abort. Without IRQS_PENDING, suspend won't abort. Consequently, level-triggered interrupts that fire during the 'noirq' phase of suspend do not currently abort suspend. So set IRQS_PENDING even for level triggered interrupts, and make sure to clear the flag in check_irq_resend. [ Changelog by courtesy of Neil ] Tested-by: NeilBrown <neilb@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | genirq: export handle_edge_irq() and irq_to_desc()Jiri Kosina2012-05-151-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | Export handle_edge_irq() and irq_to_desc() to modules to allow them to do things such as __irq_set_handler_locked(...., handle_edge_irq); This fixes ERROR: "handle_edge_irq" [drivers/gpio/gpio-pch.ko] undefined! ERROR: "irq_to_desc" [drivers/gpio/gpio-pch.ko] undefined! when gpio-pch is being built as a module. This was introduced by commit df9541a60af0 ("gpio: pch9: Use proper flow type handlers") that added __irq_set_handler_locked(d->irq, handle_edge_irq); but handle_edge_irq() was not exported for modules (and inlined __irq_set_handler_locked() requires irq_to_desc() exported as well) Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2012-03-201-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events changes for v3.4 from Ingo Molnar: - New "hardware based branch profiling" feature both on the kernel and the tooling side, on CPUs that support it. (modern x86 Intel CPUs with the 'LBR' hardware feature currently.) This new feature is basically a sophisticated 'magnifying glass' for branch execution - something that is pretty difficult to extract from regular, function histogram centric profiles. The simplest mode is activated via 'perf record -b', and the result looks like this in perf report: $ perf record -b any_call,u -e cycles:u branchy $ perf report -b --sort=symbol 52.34% [.] main [.] f1 24.04% [.] f1 [.] f3 23.60% [.] f1 [.] f2 0.01% [k] _IO_new_file_xsputn [k] _IO_file_overflow 0.01% [k] _IO_vfprintf_internal [k] _IO_new_file_xsputn 0.01% [k] _IO_vfprintf_internal [k] strchrnul 0.01% [k] __printf [k] _IO_vfprintf_internal 0.01% [k] main [k] __printf This output shows from/to branch columns and shows the highest percentage (from,to) jump combinations - i.e. the most likely taken branches in the system. "branches" can also include function calls and any other synchronous and asynchronous transitions of the instruction pointer that are not 'next instruction' - such as system calls, traps, interrupts, etc. This feature comes with (hopefully intuitive) flat ascii and TUI support in perf report. - Various 'perf annotate' visual improvements for us assembly junkies. It will now recognize function calls in the TUI and by hitting enter you can follow the call (recursively) and back, amongst other improvements. - Multiple threads/processes recording support in perf record, perf stat, perf top - which is activated via a comma-list of PIDs: perf top -p 21483,21485 perf stat -p 21483,21485 -ddd perf record -p 21483,21485 - Support for per UID views, via the --uid paramter to perf top, perf report, etc. For example 'perf top --uid mingo' will only show the tasks that I am running, excluding other users, root, etc. - Jump label restructurings and improvements - this includes the factoring out of the (hopefully much clearer) include/linux/static_key.h generic facility: struct static_key key = STATIC_KEY_INIT_FALSE; ... if (static_key_false(&key)) do unlikely code else do likely code ... static_key_slow_inc(); ... static_key_slow_inc(); ... The static_key_false() branch will be generated into the code with as little impact to the likely code path as possible. the static_key_slow_*() APIs flip the branch via live kernel code patching. This facility can now be used more widely within the kernel to micro-optimize hot branches whose likelihood matches the static-key usage and fast/slow cost patterns. - SW function tracer improvements: perf support and filtering support. - Various hardenings of the perf.data ABI, to make older perf.data's smoother on newer tool versions, to make new features integrate more smoothly, to support cross-endian recording/analyzing workflows better, etc. - Restructuring of the kprobes code, the splitting out of 'optprobes', and a corner case bugfix. - Allow the tracing of kernel console output (printk). - Improvements/fixes to user-space RDPMC support, allowing user-space self-profiling code to extract PMU counts without performing any system calls, while playing nice with the kernel side. - 'perf bench' improvements - ... and lots of internal restructurings, cleanups and fixes that made these features possible. And, as usual this list is incomplete as there were also lots of other improvements * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (120 commits) perf report: Fix annotate double quit issue in branch view mode perf report: Remove duplicate annotate choice in branch view mode perf/x86: Prettify pmu config literals perf report: Enable TUI in branch view mode perf report: Auto-detect branch stack sampling mode perf record: Add HEADER_BRANCH_STACK tag perf record: Provide default branch stack sampling mode option perf tools: Make perf able to read files from older ABIs perf tools: Fix ABI compatibility bug in print_event_desc() perf tools: Enable reading of perf.data files from different ABI rev perf: Add ABI reference sizes perf report: Add support for taken branch sampling perf record: Add support for sampling taken branch perf tools: Add code to support PERF_SAMPLE_BRANCH_STACK x86/kprobes: Split out optprobe related code to kprobes-opt.c x86/kprobes: Fix a bug which can modify kernel code permanently x86/kprobes: Fix instruction recovery on optimized path perf: Add callback to flush branch_stack on context switch perf: Disable PERF_SAMPLE_BRANCH_* when not supported perf/x86: Add LBR software filter support for Intel CPUs ...
| * Merge branch 'perf/urgent' into perf/coreIngo Molnar2012-03-051-9/+33
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: tools/perf/builtin-record.c tools/perf/builtin-top.c tools/perf/perf.h tools/perf/util/top.h Merge reason: resolve these cherry-picking conflicts. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | tracing/softirq: Move __raise_softirq_irqoff() out of headerSteven Rostedt2012-02-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __raise_softirq_irqoff() contains a tracepoint. As tracepoints in headers can cause issues, and not to mention, bloats the kernel when they are in a static inline, it is best to move the function that contains the tracepoint out of the header and into softirq.c. Link: http://lkml.kernel.org/r/20120118120711.GB14863@elte.hu Suggested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* | | Merge branch 'linus' into irq/coreThomas Gleixner2012-03-131-9/+33
|\ \ \ | | |/ | |/| | | | | | | | | | Reason: Get upstream fixes integrated before further modifications. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | genirq: Handle pending irqs in irq_startup()Thomas Gleixner2012-02-151-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An interrupt might be pending when irq_startup() is called, but the startup code does not invoke the resend logic. In some cases this prevents the device from issuing another interrupt which renders the device non functional. Call the resend function in irq_startup() to keep things going. Reported-and-tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | genirq: Unmask oneshot irqs when thread was not wokenThomas Gleixner2012-02-151-2/+23
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the primary handler of an interrupt which is marked IRQ_ONESHOT returns IRQ_HANDLED or IRQ_NONE, then the interrupt thread is not woken and the unmask logic of the interrupt line is never invoked. This keeps the interrupt masked forever. This was not noticed as most IRQ_ONESHOT users wake the thread unconditionally (usually because they cannot access the underlying device from hard interrupt context). Though this behaviour was nowhere documented and not necessarily intentional. Some drivers can avoid the thread wakeup in certain cases and run into the situation where the interrupt line s kept masked. Handle it gracefully. Reported-and-tested-by: Lothar Wassmann <lw@karo-electronics.de> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | genirq: Fix long-term regression in genirq irq_set_irq_type() handlingRussell King2012-03-061-2/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 2008, commit 0c5d1eb77a8be ("genirq: record trigger type") modified the way set_irq_type() handles the 'no trigger' condition. However, this has an adverse effect on PCMCIA support on Intel StrongARM and probably PXA platforms. PCMCIA has several status signals on the socket which can trigger interrupts; some of these status signals depend on the card's mode (whether it is configured in memory or IO mode). For example, cards have a 'Ready/IRQ' signal: in memory mode, this provides an indication to PCMCIA that the card has finished its power up initialization. In IO mode, it provides the device interrupt signal. Other status signals switch between on-board battery status and loud speaker output. In classical PCMCIA implementations, where you have a specific socket controller, the controller provides a method to mask interrupts from the socket, and importantly ignore any state transitions on the pins which correspond with interrupts once masked. This masking prevents unwanted events caused by the removal and application of socket power being forwarded. However, on platforms where there is no socket controller, the PCMCIA status and interrupt signals are routed to standard edge-triggered GPIOs. These GPIOs can be configured to interrupt on rising edge, falling edge, or never. This is where the problems start. Edge triggered interrupts are required to record events while disabled via the usual methods of {free,request,disable,enable}_irq() to prevent problems with dropped interrupts (eg, the 8390 driver uses disable_irq() to defer the delivery of interrupts). As a result, these interfaces can not be used to implement the desired behaviour. The side effect of this is that if the 'Ready/IRQ' GPIO is disabled via disable_irq() on suspend, and enabled via enable_irq() after resume, we will record the state transitions caused by powering events as valid interrupts, and foward them to the card driver, which may attempt to access a card which is not powered up. This leads delays resume while drivers spin in their interrupt handlers, and complaints from drivers before they realize what's happened. Moreover, in the case of the 'Ready/IRQ' signal, this is requested and freed by the card driver itself; the PCMCIA core has no idea whether the interrupt is requested, and, therefore, whether a call to disable_irq() would be valid. (We tried this around 2.4.17 / 2.5.1 kernel era, and ended up throwing it out because of this problem.) Therefore, it was decided back in around 2002 to disable the edge triggering instead, resulting in all state transitions on the GPIO being ignored. That's what we actually need the hardware to do. The commit above changes this behaviour; it explicitly prevents the 'no trigger' state being selected. The reason that request_irq() does not accept the 'no trigger' state is for compatibility with existing drivers which do not provide their desired triggering configuration. The set_irq_type() function is 'new' and not used by non-trigger aware drivers. Therefore, revert this change, and restore previously working platforms back to their former state. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: linux@arm.linux.org.uk Cc: Ingo Molnar <mingo@elte.hu> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Add support for per-cpu dev_id interruptsMarc Zyngier2011-10-031-7/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Make irq_shutdown() symmetric vs. irq_startup againGeert Uytterhoeven2011-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | If an irq_chip provides .irq_shutdown(), but neither of .irq_disable() or .irq_mask(), free_irq() crashes when jumping to NULL. Fix this by only trying .irq_disable() and .irq_mask() if there's no .irq_shutdown() provided. This revives the symmetry with irq_startup(), which tries .irq_startup(), .irq_enable(), and irq_unmask(), and makes it consistent with the comment for irq_chip.irq_shutdown() in <linux/irq.h>, which says: * @irq_shutdown: shut down the interrupt (defaults to ->disable if NULL) This is also how __free_irq() behaved before the big overhaul, cfr. e.g. 3b56f0585fd4c02d047dc406668cb40159b2d340 ("genirq: Remove bogus conditional"), where the core interrupt code always overrode .irq_shutdown() to .irq_disable() if .irq_shutdown() was NULL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Link: http://lkml.kernel.org/r/1315742394-16036-2-git-send-email-geert@linux-m68k.org Cc: stable@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irq: Export functions to allow modular irq driversJonathan Cameron2011-05-181-0/+2
| | | | | | | | | | | | | | Export handle_simple_irq, irq_modify_status, irq_alloc_descs, irq_free_descs and generic_handle_irq to allow their usage in modules. First user is IIO, which wants to be built modular, but needs to be able to create irq chips, allocate and configure interrupt descriptors and handle demultiplexing interrupts. [ tglx: Moved the uninlinig of generic_handle_irq to a separate patch ] Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Link: http://lkml.kernel.org/r/%3C1305711544-505-1-git-send-email-jic23%40cam.ac.uk%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Support per-IRQ thread disabling.Paul Mundt2011-04-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for disabling threading on a per-IRQ basis via the IRQ status instead of the IRQ flow, which is necessary for interrupts that don't follow the natural IRQ flow channels, such as those that are virtually created. The new APIs added are simply: irq_set_thread() irq_set_nothread() which follow the rest of the IRQ status routines. Chained handlers also have IRQ_NOTHREAD set on them automatically, making the lack of threading explicit rather than implicit. Subsequently, the nothread flag can be viewed through the standard genirq debugging facilities. [ tglx: Fixed cleanup fallout ] Signed-off-by: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/%3C20110406210135.GF18426%40linux-sh.org%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* genirq: fix CONFIG_IRQ_EDGE_EOI_HANDLER buildStephen Rothwell2011-03-291-1/+1
| | | | | | | | | | | Fixes these errors: kernel/irq/chip.c: In function 'handle_edge_eoi_irq': kernel/irq/chip.c:517: warning: label 'out_unlock' defined but not used kernel/irq/chip.c:503: error: label 'out_eoi' used but not defined Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* genirq: Remove compat codeThomas Gleixner2011-03-291-129/+0
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq; Fix cleanup falloutThomas Gleixner2011-03-291-0/+2
| | | | | | | | | I missed the CONFIG_GENERIC_PENDING_IRQ dependency in the affinity related functions and the IRQ_LEVEL propagation into irq_data state. Did not pop up on my main test platforms. :( Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: David Daney <ddaney@caviumnetworks.com>
* genirq: Provide edge_eoi flow handlerThomas Gleixner2011-03-281-0/+45
| | | | | | | This is a replacment for the cell flow handler which is in the way of cleanups. Must be selected to avoid general bloat. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_dataThomas Gleixner2011-03-281-21/+19
| | | | | | | | We really need these flags for some of the interrupt chips. Move it from internal state to irq_data and provide proper accessors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Daney <ddaney@caviumnetworks.com>
* genirq: Add chip flag for restricting cpu_on/offline callsThomas Gleixner2011-03-271-4/+6
| | | | | | | Add a flag which indicates that the on/offline callback should only be called on enabled interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Add chip hooks for taking CPUs on/off line.David Daney2011-03-271-0/+58
| | | | | | | | | | | [ tglx: Removed the enabled argument as this is now available in irq_data ] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org LKML-Reference: <1301081931-11240-3-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Add irq disabled flag to irq_data stateThomas Gleixner2011-03-271-2/+3
| | | | | | | | Some irq_chip implementation require to know the disabled state of the interrupt in certain callbacks. Add a state flag and accessor to irq_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Reserve the irq when calling irq_set_chip()David Daney2011-03-271-0/+6
| | | | | | | | | | | | | | | The helper macros and functions like for_each_active_irq() don't work unless the irq is in the allocated_irqs set. In the case of !CONFIG_SPARSE_IRQ, instead of forcing all users of the irq infrastructure to explicitly call irq_reserve_irq(), do it for them. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org LKML-Reference: <1301081931-11240-2-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Fixup fasteoi handler for oneshot modeThomas Gleixner2011-03-021-0/+4
| | | | | | | The fasteoi handler must mask the interrupt line in oneshot mode otherwise we end up with an irq storm. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Fix misplaced status update in irq_disable()Thomas Gleixner2011-02-211-1/+1
| | | | | | | We lazy disable interrupt lines, so only mark the line masked, when the chip provides an irq_disable callback. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq; Add fasteoi irq_chip quirkThomas Gleixner2011-02-191-1/+8
| | | | | | | | | Some chips want irq_eoi() only called when an interrupt is actually handled. So they have checks for INPROGRESS and DISABLED in their irq_eoi callbacks. Add a chip flag, which allows to handle that in the generic code. No impact on the fastpath. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Add preflow handler supportThomas Gleixner2011-02-191-0/+11
| | | | | | | | | sparc64 needs to call a preflow handler on certain interrupts befor calling the action chain. Integrate it into handle_fasteoi_irq. Must be enabled via CONFIG_IRQ_FASTEOI_PREFLOW. No impact when disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David S. Miller <davem@davemloft.net>
* genirq: Consolidate set_chip_handler functionsThomas Gleixner2011-02-191-12/+4
| | | | | | No need to have separate functions if we have one plus inline wrappers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Use irq_get/put functionsThomas Gleixner2011-02-191-67/+26
| | | | | | | Convert the management functions to use the common irq_get/put function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Remove real old transition functionsThomas Gleixner2011-02-191-12/+4
| | | | | | These transition helpers are stale for years now. Remove them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Reflect IRQ_MOVE_PCNTXT in irq_data stateThomas Gleixner2011-02-191-1/+3
| | | | | | Required by x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Add IRQCHIP_SET_TYPE_MASKED flagThomas Gleixner2011-02-191-2/+2
| | | | | | | | | | irq_chips, which require to mask the chip before changing the trigger type should set this flag. So the core takes care of it and the requirement for looking into desc->status in the chip goes away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de>
* genirq: Wrap the remaning IRQ_* flagsThomas Gleixner2011-02-191-1/+2
| | | | | | Use wrappers to keep them away from the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Mirror irq trigger type bits in irq_data.stateThomas Gleixner2011-02-191-1/+4
| | | | | | | | | | | | | | | | | That's the data structure chip functions get provided. Also allow them to signal the core code that they updated the flags in irq_data.state by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged. The type bits should be accessed via: val = irqd_get_trigger_type(irqdata); and irqd_set_trigger_type(irqdata, val); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.stateThomas Gleixner2011-02-191-6/+9
| | | | | | | | | | | | | | That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Move IRQ_MASKED to coreThomas Gleixner2011-02-191-8/+20
| | | | | | Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Move IRQ_PENDING flag to coreThomas Gleixner2011-02-191-4/+6
| | | | | | Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Move IRQ_DISABLED to coreThomas Gleixner2011-02-191-17/+31
| | | | | | Keep status in sync until all abusers are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Move IRQ_REPLAY and IRQ_WAITING to coreThomas Gleixner2011-02-191-5/+4
| | | | | | No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Move IRQ_ONESHOT to coreThomas Gleixner2011-02-191-1/+1
| | | | | | No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Add IRQ_INPROGRESS to coreThomas Gleixner2011-02-191-7/+9
| | | | | | | | | | | | | We need to maintain the flag for now in both fields status and istate. Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o the status one. Wrap the access to status IRQ_INPROGRESS in a inline which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along with the define. There is no reason that anything outside of core looks at this. That needs some modifications, but we'll get there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Move IRQ_POLL_INPROGRESS to coreThomas Gleixner2011-02-191-1/+1
| | | | | | No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Use modify_status for set_irq_nested_threadThomas Gleixner2011-02-191-28/+0
| | | | | | No need for a separate function in the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Fixup core code namespace falloutThomas Gleixner2011-02-191-3/+3
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Use handle_perpcu_event() in handle_percpu_irq()Thomas Gleixner2011-02-191-8/+6
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Use handle_irq_event() in handle_edge_irq()Thomas Gleixner2011-02-191-14/+2
| | | | | | | It's safe to drop the IRQ_INPROGRESS flag between action chain walks as we are protected by desc->lock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Use handle_irq_event() in handle_fasteoi_irq()Thomas Gleixner2011-02-191-17/+2
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Use handle_irq_event() in handle_level_irq()Thomas Gleixner2011-02-191-14/+2
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
OpenPOWER on IntegriCloud