summaryrefslogtreecommitdiffstats
path: root/kernel/cpuset.c
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] cpuset: remove useless local variable initializationPaul Jackson2006-03-241-1/+1
| | | | | | | | | | | | | Remove a useless variable initialization in cpuset __cpuset_zone_allowed(). The local variable 'allowed' is unconditionally set before use, later on in the code, so does not need to be initialized. Not that it seems to matter to the code generated any, as the compiler optimizes out the superfluous assignment anyway. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: don't need to mark cpuset_mems_generation atomicPaul Jackson2006-03-241-8/+11
| | | | | | | | | | Drop the atomic_t marking on the cpuset static global cpuset_mems_generation. Since all access to it is guarded by the global manage_mutex, there is no need for further serialization of this value. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: remove unnecessary NULL checkPaul Jackson2006-03-241-12/+6
| | | | | | | | | Remove a no longer needed test for NULL cpuset pointer, with a little comment explaining why the test isn't needed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset memory spread basic implementationPaul Jackson2006-03-241-6/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset use combined atomic_inc_return callsPaul Jackson2006-03-241-7/+4
| | | | | | | | | Replace pairs of calls to <atomic_inc, atomic_read>, with a single call atomic_inc_return, saving a few bytes of source and kernel text. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset cleanup not not operatorsPaul Jackson2006-03-241-5/+5
| | | | | | | | | | Since the test_bit() bit operator is boolean (return 0 or 1), the double not "!!" operations needed to convert a scalar (zero or not zero) to a boolean are not needed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kernel/cpuset.c, mutex conversionIngo Molnar2006-03-231-109/+103
| | | | | | | | | | | convert cpuset.c's callback_sem and manage_sem to mutexes. Build and boot tested by Ingo. Build, boot, unit and stress tested by pj. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: oops in exit on null cpuset fixPaul Jackson2006-02-151-1/+34
| | | | | | | | | | | | | | | Fix a latent bug in cpuset_exit() handling. If a task tried to allocate memory after calling cpuset_exit(), it oops'd in cpuset_update_task_memory_state() on a NULL cpuset pointer. So set the exiting tasks cpuset to the root cpuset instead of to NULL. A distro kernel hit this with an added kernel package that had just such a hook (allocating memory) in the exit code path. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: fix sparse warningRandy Dunlap2006-02-031-1/+1
| | | | | | | | | kernel/cpuset.c:644:38: warning: non-ANSI function declaration of function 'cpuset_update_task_memory_state' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset oom lock fixPaul Jackson2006-01-141-5/+28
| | | | | | | | | | | | | | | | | | | | | | | | | The problem, reported in: http://bugzilla.kernel.org/show_bug.cgi?id=5859 and by various other email messages and lkml posts is that the cpuset hook in the oom (out of memory) code can try to take a cpuset semaphore while holding the tasklist_lock (a spinlock). One must not sleep while holding a spinlock. The fix seems easy enough - move the cpuset semaphore region outside the tasklist_lock region. This required a few lines of mechanism to implement. The oom code where the locking needs to be changed does not have access to the cpuset locks, which are internal to kernel/cpuset.c only. So I provided a couple more cpuset interface routines, available to the rest of the kernel, which simple take and drop the lock needed here (cpusets callback_sem). Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Unlinline a bunch of other functionsArjan van de Ven2006-01-141-1/+1
| | | | | | | | | | | Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_semJes Sorensen2006-01-091-5/+5
| | | | | | | | | | | | | This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: Ingo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* [PATCH] shrink dentry structEric Dumazet2006-01-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some long time ago, dentry struct was carefully tuned so that on 32 bits UP, sizeof(struct dentry) was exactly 128, ie a power of 2, and a multiple of memory cache lines. Then RCU was added and dentry struct enlarged by two pointers, with nice results for SMP, but not so good on UP, because breaking the above tuning (128 + 8 = 136 bytes) This patch reverts this unwanted side effect, by using an union (d_u), where d_rcu and d_child are placed so that these two fields can share their memory needs. At the time d_free() is called (and d_rcu is really used), d_child is known to be empty and not touched by the dentry freeing. Lockless lookups only access d_name, d_parent, d_lock, d_op, d_flags (so the previous content of d_child is not needed if said dentry was unhashed but still accessed by a CPU because of RCU constraints) As dentry cache easily contains millions of entries, a size reduction is worth the extra complexity of the ugly C union. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Maneesh Soni <maneesh@in.ibm.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Ian Kent <raven@themaw.net> Cc: Paul Jackson <pj@sgi.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: James Morris <jmorris@namei.org> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: skip rcu check if task is in root cpusetPaul Jackson2006-01-081-4/+9
| | | | | | | | | | | | | | | | | For systems that aren't using cpusets, but have them CONFIG_CPUSET enabled in their kernel (eventually this may be most distribution kernels), this patch removes even the minimal rcu_read_lock() from the memory page allocation path. Actually, it removes that rcu call for any task that is in the root cpuset (top_cpuset), which on systems not actively using cpusets, is all tasks. We don't need the rcu check for tasks in the top_cpuset, because the top_cpuset is statically allocated, so at no risk of being freed out from underneath us. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: mark number_of_cpusets read_mostlyPaul Jackson2006-01-081-1/+1
| | | | | | | | | | | | | | | | | Mark cpuset global 'number_of_cpusets' as __read_mostly. This global is accessed everytime a zone is considered in the zonelist loops beneath __alloc_pages, looking for a free memory page. If number_of_cpusets is just one, then we can short circuit the mems_allowed check. Since this global is read alot on a hot path, and written rarely, it is an excellent candidate for __read_mostly. Thanks to Christoph Lameter for the suggestion. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: use rcu directly optimizationPaul Jackson2006-01-081-10/+30
| | | | | | | | | | | | | | | | | | | | | | | Optimize the cpuset impact on page allocation, the most performance critical cpuset hook in the kernel. On each page allocation, the cpuset hook needs to check for a possible change in the current tasks cpuset. It can now handle the common case, of no change, without taking any spinlock or semaphore, thanks to RCU. Convert a spinlock on the current task to an rcu_read_lock(), saving approximately a memory barrier and an atomic op, depending on architecture. This is done by adding rcu_assign_pointer() and synchronize_rcu() calls to the write side of the task->cpuset pointer, in cpuset.c:attach_task(), to delay freeing up a detached cpuset until after any critical sections referencing that pointer. Thanks to Andi Kleen, Nick Piggin and Eric Dumazet for ideas. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: remove test for null cpuset from alloc code pathPaul Jackson2006-01-081-6/+16
| | | | | | | | | | | | | | | | | | Remove a couple of more lines of code from the cpuset hooks in the page allocation code path. There was a check for a NULL cpuset pointer in the routine cpuset_update_task_memory_state() that was only needed during system boot, after the memory subsystem was initialized, before the cpuset subsystem was initialized, to catch a NULL task->cpuset pointer. Add a cpuset_init_early() routine, just before the mem_init() call in init/main.c, that sets up just enough of the init tasks cpuset structure to render cpuset_update_task_memory_state() calls harmless. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: migrate all tasks in cpuset at oncePaul Jackson2006-01-081-13/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Given the mechanism in the previous patch to handle rebinding the per-vma mempolicies of all tasks in a cpuset that changes its memory placement, it is now easier to handle the page migration requirements of such tasks at the same time. The previous code didn't actually attempt to migrate the pages of the tasks in a cpuset whose memory placement changed until the next time each such task tried to allocate memory. This was undesirable, as users invoking memory page migration exected to happen when the placement changed, not some unspecified time later when the task needed more memory. It is now trivial to handle the page migration at the same time as the per-vma rebinding is done. The routine cpuset.c:update_nodemask(), which handles changing a cpusets memory placement ('mems') now checks for the special case of being asked to write a placement that is the same as before. It was harmless enough before to just recompute everything again, even though nothing had changed. But page migration is a heavy weight operation - moving pages about. So now it is worth avoiding that if asked to move a cpuset to its current location. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: rebind vma mempolicies fixPaul Jackson2006-01-081-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix more of longstanding bug in cpuset/mempolicy interaction. NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset to just the Memory Nodes allowed by that cpuset. The kernel maintains internal state for each mempolicy, tracking what nodes are used for the MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies. When a tasks cpuset memory placement changes, whether because the cpuset changed, or because the task was attached to a different cpuset, then the tasks mempolicies have to be rebound to the new cpuset placement, so as to preserve the cpuset-relative numbering of the nodes in that policy. An earlier fix handled such mempolicy rebinding for mempolicies attached to a task. This fix rebinds mempolicies attached to vma's (address ranges in a tasks address space.) Due to the need to hold the task->mm->mmap_sem semaphore while updating vma's, the rebinding of vma mempolicies has to be done when the cpuset memory placement is changed, at which time mmap_sem can be safely acquired. The tasks mempolicy is rebound later, when the task next attempts to allocate memory and notices that its task->cpuset_mems_generation is out-of-date with its cpusets mems_generation. Because walking the tasklist to find all tasks attached to a changing cpuset requires holding tasklist_lock, a spinlock, one cannot update the vma's of the affected tasks while doing the tasklist scan. In general, one cannot acquire a semaphore (which can sleep) while already holding a spinlock (such as tasklist_lock). So a list of mm references has to be built up during the tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem acquired, and the vma's in that mm rebound. Once the tasklist lock is dropped, affected tasks may fork new tasks, before their mm's are rebound. A kernel global 'cpuset_being_rebound' is set to point to the cpuset being rebound (there can only be one; cpuset modifications are done under a global 'manage_sem' semaphore), and the mpol_copy code that is used to copy a tasks mempolicies during fork catches such forking tasks, and ensures their children are also rebound. When a task is moved to a different cpuset, it is easier, as there is only one task involved. It's mm->vma's are scanned, using the same mpol_rebind_policy() as used above. It may happen that both the mpol_copy hook and the update done via the tasklist scan update the same mm twice. This is ok, as the mempolicies of each vma in an mm keep track of what mems_allowed they are relative to, and safely no-op a second request to rebind to the same nodes. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: number_of_cpusets optimizationPaul Jackson2006-01-081-1/+11
| | | | | | | | | | | | | | | | Easy little optimization hack to avoid actually having to call cpuset_zone_allowed() and check mems_allowed, in the main page allocation routine, __alloc_pages(). This saves several CPU cycles per page allocation on systems not using cpusets. A counter is updated each time a cpuset is created or removed, and whenever there is only one cpuset in the system, it must be the root cpuset, which contains all CPUs and all Memory Nodes. In that case, when the counter is one, all allocations are allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: numa_policy_rebind cleanupPaul Jackson2006-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanup, reorganize and make more robust the mempolicy.c code to rebind mempolicies relative to the containing cpuset after a tasks memory placement changes. The real motivator for this cleanup patch is to lay more groundwork for the upcoming patch to correctly rebind NUMA mempolicies that are attached to vma's after the containing cpuset memory placement changes. NUMA mempolicies are constrained by the cpuset their task is a member of. When either (1) a task is moved to a different cpuset, or (2) the 'mems' mems_allowed of a cpuset is changed, then the NUMA mempolicies have embedded node numbers (for MPOL_BIND, MPOL_INTERLEAVE and MPOL_PREFERRED) that need to be recalculated, relative to their new cpuset placement. The old code used an unreliable method of determining what was the old mems_allowed constraining the mempolicy. It just looked at the tasks mems_allowed value. This sort of worked with the present code, that just rebinds the -task- mempolicy, and leaves any -vma- mempolicies broken, referring to the old nodes. But in an upcoming patch, the vma mempolicies will be rebound as well. Then the order in which the various task and vma mempolicies are updated will no longer be deterministic, and one can no longer count on the task->mems_allowed holding the old value for as long as needed. It's not even clear if the current code was guaranteed to work reliably for task mempolicies. So I added a mems_allowed field to each mempolicy, stating exactly what mems_allowed the policy is relative to, and updated synchronously and reliably anytime that the mempolicy is rebound. Also removed a useless wrapper routine, numa_policy_rebind(), and had its caller, cpuset_update_task_memory_state(), call directly to the rewritten policy_rebind() routine, and made that rebind routine extern instead of static, and added a "mpol_" prefix to its name, making it mpol_rebind_policy(). Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: implement cpuset_mems_allowedPaul Jackson2006-01-081-3/+26
| | | | | | | | | | Provide a cpuset_mems_allowed() method, which the sys_migrate_pages() code needed, to obtain the mems_allowed vector of a cpuset, and replaced the workaround in sys_migrate_pages() to call this new method. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: combine refresh_mems and update_memsPaul Jackson2006-01-081-54/+41
| | | | | | | | | | | | | | | | | | | | | The important code paths through alloc_pages_current() and alloc_page_vma(), by which most kernel page allocations go, both called cpuset_update_current_mems_allowed(), which in turn called refresh_mems(). -Both- of these latter two routines did a tasklock, got the tasks cpuset pointer, and checked for out of date cpuset->mems_generation. That was a silly duplication of code and waste of CPU cycles on an important code path. Consolidated those two routines into a single routine, called cpuset_update_task_memory_state(), since it updates more than just mems_allowed. Changed all callers of either routine to call the new consolidated routine. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: fork hook fixPaul Jackson2006-01-081-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix obscure, never seen in real life, cpuset fork race. The cpuset_fork() call in fork.c was setting up the correct task->cpuset pointer after the tasklist_lock was dropped, which briefly exposed the newly forked process with an unsafe (copied from parent without locks or usage counter increment) cpuset pointer. In theory, that exposed cpuset pointer could have been pointing at a cpuset that was already freed and removed, and in theory another task that had been sitting on the tasklist_lock waiting to scan the task list could have raced down the entire tasklist, found our new child at the far end, and dereferenced that bogus cpuset pointer. To fix, setup up the correct cpuset pointer in the new child by calling cpuset_fork() before the new task is linked into the tasklist, and with that, add a fork failure case, to dereference that cpuset, if the fork fails along the way, after cpuset_fork() was called. Had to remove a BUG_ON() from cpuset_exit(), because it was no longer valid - the call to cpuset_exit() from a failed fork would not have PF_EXITING set. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: update_nodemask code reformatPaul Jackson2006-01-081-10/+15
| | | | | | | | | | | Restructure code layout of the kernel/cpuset.c update_nodemask() routine, removing embedded returns and nested if's in favor of goto completion labels. This is being done in anticipation of adding more logic to this routine, which will favor the goto style structure. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: minor spacing initializer fixesPaul Jackson2006-01-081-6/+3
| | | | | | | | | Four trivial cpuset fixes: remove extra spaces, remove useless initializers, mark one __read_mostly. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: memory pressure meterPaul Jackson2006-01-081-2/+191
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide a simple per-cpuset metric of memory pressure, tracking the -rate- that the tasks in a cpuset call try_to_free_pages(), the synchronous (direct) memory reclaim code. This enables batch managers monitoring jobs running in dedicated cpusets to efficiently detect what level of memory pressure that job is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. This patch just provides a very economical way for the batch manager to monitor a cpuset for signs of memory pressure. It's up to the batch manager or other user code to decide what to do about it and take action. ==> Unless this feature is enabled by writing "1" to the special file /dev/cpuset/memory_pressure_enabled, the hook in the rebalance code of __alloc_pages() for this metric reduces to simply noticing that the cpuset_memory_pressure_enabled flag is zero. So only systems that enable this feature will compute the metric. Why a per-cpuset, running average: Because this meter is per-cpuset, rather than per-task or mm, the system load imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a scan of the tasklist can be avoided on each set of queries. Because this meter is a running average, instead of an accumulating counter, a batch scheduler can detect memory pressure with a single read, instead of having to read and accumulate results for a period of time. Because this meter is per-cpuset rather than per-task or mm, the batch scheduler can obtain the key information, memory pressure in a cpuset, with a single read, rather than having to query and accumulate results over all the (dynamically changing) set of tasks in the cpuset. A per-cpuset simple digital filter (requires a spinlock and 3 words of data per-cpuset) is kept, and updated by any task attached to that cpuset, if it enters the synchronous (direct) page reclaim code. A per-cpuset file provides an integer number representing the recent (half-life of 10 seconds) rate of direct page reclaims caused by the tasks in the cpuset, in units of reclaims attempted per second, times 1000. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: mempolicy one more nodemask conversionPaul Jackson2006-01-081-10/+0
| | | | | | | | | | | | | | | Finish converting mm/mempolicy.c from bitmaps to nodemasks. The previous conversion had left one routine using bitmaps, since it involved a corresponding change to kernel/cpuset.c Fix that interface by replacing with a simple macro that calls nodes_subset(), or if !CONFIG_CPUSET, returns (1). Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <christoph@lameter.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpusets: swap migration interfacePaul Jackson2006-01-081-2/+36
| | | | | | | | | | | | | | | | | | | | | | Add a boolean "memory_migrate" to each cpuset, represented by a file containing "0" or "1" in each directory below /dev/cpuset. It defaults to false (file contains "0"). It can be set true by writing "1" to the file. If true, then anytime that a task is attached to the cpuset so marked, the pages of that task will be moved to that cpuset, preserving, to the extent practical, the cpuset-relative placement of the pages. Also anytime that a cpuset so marked has its memory placement changed (by writing to its "mems" file), the tasks in that cpuset will have their pages moved to the cpusets new nodes, preserving, to the extent practical, the cpuset-relative placement of the moved pages. Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset: fix return without releasing semaphoreBob Picco2005-11-131-2/+3
| | | | | | | | | | It is wrong to acquire the semaphore and then return from cpuset_zone_allowed without releasing it. Signed-off-by: Bob Picco <bob.picco@hp.com> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpusets: automatic numa mempolicy rebindingPaul Jackson2005-10-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch automatically updates a tasks NUMA mempolicy when its cpuset memory placement changes. It does so within the context of the task, without any need to support low level external mempolicy manipulation. If a system is not using cpusets, or if running on a system with just the root (all-encompassing) cpuset, then this remap is a no-op. Only when a task is moved between cpusets, or a cpusets memory placement is changed does the following apply. Otherwise, the main routine below, rebind_policy() is not even called. When mixing cpusets, scheduler affinity, and NUMA mempolicies, the essential role of cpusets is to place jobs (several related tasks) on a set of CPUs and Memory Nodes, the essential role of sched_setaffinity is to manage a jobs processor placement within its allowed cpuset, and the essential role of NUMA mempolicy (mbind, set_mempolicy) is to manage a jobs memory placement within its allowed cpuset. However, CPU affinity and NUMA memory placement are managed within the kernel using absolute system wide numbering, not cpuset relative numbering. This is ok until a job is migrated to a different cpuset, or what's the same, a jobs cpuset is moved to different CPUs and Memory Nodes. Then the CPU affinity and NUMA memory placement of the tasks in the job need to be updated, to preserve their cpuset-relative position. This can be done for CPU affinity using sched_setaffinity() from user code, as one task can modify anothers CPU affinity. This cannot be done from an external task for NUMA memory placement, as that can only be modified in the context of the task using it. However, it easy enough to remap a tasks NUMA mempolicy automatically when a task is migrated, using the existing cpuset mechanism to trigger a refresh of a tasks memory placement after its cpuset has changed. All that is needed is the old and new nodemask, and notice to the task that it needs to rebind its mempolicy. The tasks mems_allowed has the old mask, the tasks cpuset has the new mask, and the existing cpuset_update_current_mems_allowed() mechanism provides the notice. The bitmap/cpumask/nodemask remap operators provide the cpuset relative calculations. This patch leaves open a couple of issues: 1) Updating vma and shmfs/tmpfs/hugetlbfs memory policies: These mempolicies may reference nodes outside of those allowed to the current task by its cpuset. Tasks are migrated as part of jobs, which reside on what might be several cpusets in a subtree. When such a job is migrated, all NUMA memory policy references to nodes within that cpuset subtree should be translated, and references to any nodes outside that subtree should be left untouched. A future patch will provide the cpuset mechanism needed to mark such subtrees. With that patch, we will be able to correctly migrate these other memory policies across a job migration. 2) Updating cpuset, affinity and memory policies in user space: This is harder. Any placement state stored in user space using system-wide numbering will be invalidated across a migration. More work will be required to provide user code with a migration-safe means to manage its cpuset relative placement, while preserving the current API's that pass system wide numbers, not cpuset relative numbers across the kernel-user boundary. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpusets: simple renamePaul Jackson2005-10-301-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for renaming cpusets. Only allow simple rename of cpuset directories in place. Don't allow moving cpusets elsewhere in hierarchy or renaming the special cpuset files in each cpuset directory. The usefulness of this simple rename became apparent when developing task migration facilities. It allows building a second cpuset hierarchy using new names and containing new CPUs and Memory Nodes, moving tasks from the old to the new cpusets, removing the old cpusets, and then renaming the new cpusets to be just like the old names, so that any knowledge that the tasks had of their cpuset names will still be valid. Leaf node cpusets can be migrated to other CPUs or Memory Nodes by just updating their 'cpus' and 'mems' files, but because no cpuset can contain CPUs or Nodes not in its parent cpuset, one cannot do this in a cpuset hierarchy without first expanding all the non-leaf cpusets to contain the union of both the old and new CPUs and Nodes, which would obfuscate the one-to-one migration of a task from one cpuset to another required to correctly migrate the physical page frames currently allocated to that task. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpusets: dual semaphore locking overhaulPaul Jackson2005-10-301-137/+281
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Overhaul cpuset locking. Replace single semaphore with two semaphores. The suggestion to use two locks was made by Roman Zippel. Both locks are global. Code that wants to modify cpusets must first acquire the exclusive manage_sem, which allows them read-only access to cpusets, and holds off other would-be modifiers. Before making actual changes, the second semaphore, callback_sem must be acquired as well. Code that needs only to query cpusets must acquire callback_sem, which is also a global exclusive lock. The earlier problems with double tripping are avoided, because it is allowed for holders of manage_sem to nest the second callback_sem lock, and only callback_sem is needed by code called from within __alloc_pages(), where the double tripping had been possible. This is not quite the same as a normal read/write semaphore, because obtaining read-only access with intent to change must hold off other such attempts, while allowing read-only access w/o such intention. Changing cpusets involves several related checks and changes, which must be done while allowing read-only queries (to avoid the double trip), but while ensuring nothing changes (holding off other would be modifiers.) This overhaul of cpuset locking also makes careful use of task_lock() to guard access to the task->cpuset pointer, closing a couple of race conditions noticed while reading this code (thanks, Roman). I've never seen these races fail in any use or test. See further the comments in the code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpusets: remove depth counted locking hackPaul Jackson2005-10-301-65/+40
| | | | | | | | | | | | | | | | | | Remove a rather hackish depth counter on cpuset locking. The depth counter was avoiding a possible double trip on the global cpuset_sem semaphore. It worked, but now an improved version of cpuset locking is available, to come in the next patch, using two global semaphores. This patch reverses "cpuset semaphore depth check deadlock fix" The kernel still works, even after this patch, except for some rare and difficult to reproduce race conditions when agressively creating and destroying cpusets marked with the notify_on_release option, on very large systems. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset cleanupPaul Jackson2005-10-301-1/+0
| | | | | | | | Remove one more useless line from cpuset_common_file_read(). Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] gfp flags annotations - part 1Al Viro2005-10-081-1/+1
| | | | | | | | | | | | - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset crapectomyAl Viro2005-09-301-11/+1
| | | | | | | | | Switched cpuset_common_file_read() to simple_read_from_buffer(), killed a bunch of useless (and not quite correct - e.g. min(size_t,ssize_t)) code. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset read past eof memory leak fixPaul Jackson2005-09-281-5/+6
| | | | | | | | Don't leak a page of memory if user reads a cpuset file past eof. Signed-off-by: KUROSAWA Takahiro <kurosawa@valinux.co.jp> Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset semaphore depth check optimizePaul Jackson2005-09-121-4/+9
| | | | | | | | | | | | | | | | Optimize the deadlock avoidance check on the global cpuset semaphore cpuset_sem. Instead of adding a depth counter to the task struct of each task, rather just two words are enough, one to store the depth and the other the current cpuset_sem holder. Thanks to Nikita Danilov for the idea. Signed-off-by: Paul Jackson <pj@sgi.com> [ We may want to change this further, but at least it's now a totally internal decision to the cpusets code ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset semaphore depth check deadlock fixPaul Jackson2005-09-101-40/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cpusets-formalize-intermediate-gfp_kernel-containment patch has a deadlock problem. This patch was part of a set of four patches to make more extensive use of the cpuset 'mem_exclusive' attribute to manage kernel GFP_KERNEL memory allocations and to constrain the out-of-memory (oom) killer. A task that is changing cpusets in particular ways on a system when it is very short of free memory could double trip over the global cpuset_sem semaphore (get the lock and then deadlock trying to get it again). The second attempt to get cpuset_sem would be in the routine cpuset_zone_allowed(). This was discovered by code inspection. I can not reproduce the problem except with an artifically hacked kernel and a specialized stress test. In real life you cannot hit this unless you are manipulating cpusets, and are very unlikely to hit it unless you are rapidly modifying cpusets on a memory tight system. Even then it would be a rare occurence. If you did hit it, the task double tripping over cpuset_sem would deadlock in the kernel, and any other task also trying to manipulate cpusets would deadlock there too, on cpuset_sem. Your batch manager would be wedged solid (if it was cpuset savvy), but classic Unix shells and utilities would work well enough to reboot the system. The unusual condition that led to this bug is that unlike most semaphores, cpuset_sem _can_ be acquired while in the page allocation code, when __alloc_pages() calls cpuset_zone_allowed. So it easy to mistakenly perform the following sequence: 1) task makes system call to alter a cpuset 2) take cpuset_sem 3) try to allocate memory 4) memory allocator, via cpuset_zone_allowed, trys to take cpuset_sem 5) deadlock The reason that this is not a serious bug for most users is that almost all calls to allocate memory don't require taking cpuset_sem. Only some code paths off the beaten track require taking cpuset_sem -- which is good. Taking a global semaphore on the main code path for allocating memory would not scale well. This patch fixes this deadlock by wrapping the up() and down() calls on cpuset_sem in kernel/cpuset.c with code that tracks the nesting depth of the current task on that semaphore, and only does the real down() if the task doesn't hold the lock already, and only does the real up() if the nesting depth (number of unmatched downs) is exactly one. The previous required use of refresh_mems(), anytime that the cpuset_sem semaphore was acquired and the code executed while holding that semaphore might try to allocate memory, is no longer required. Two refresh_mems() calls were removed thanks to this. This is a good change, as failing to get all the necessary refresh_mems() calls placed was a primary source of bugs in this cpuset code. The only remaining call to refresh_mems() is made while doing a memory allocation, if certain task memory placement data needs to be updated from its cpuset, due to the cpuset having been changed behind the tasks back. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix for cpusets minor problemKUROSAWA Takahiro2005-09-091-0/+4
| | | | | | | | | | This patch fixes minor problem that the CPUSETS have when files in the cpuset filesystem are read after lseek()-ed beyond the EOF. Signed-off-by: KUROSAWA Takahiro <kurosawa@valinux.co.jp> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpusets: re-enable "dynamic sched domains"John Hawkes2005-09-071-12/+0
| | | | | | | | | Revert the hack introduced last week. Signed-off-by: John Hawkes <hawkes@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpusets: confine oom_killer to mem_exclusive cpusetPaul Jackson2005-09-071-0/+33
| | | | | | | | | | | | | | | | | | | | | Now the real motivation for this cpuset mem_exclusive patch series seems trivial. This patch keeps a task in or under one mem_exclusive cpuset from provoking an oom kill of a task under a non-overlapping mem_exclusive cpuset. Since only interrupt and GFP_ATOMIC allocations are allowed to escape mem_exclusive containment, there is little to gain from oom killing a task under a non-overlapping mem_exclusive cpuset, as almost all kernel and user memory allocation must come from disjoint memory nodes. This patch enables configuring a system so that a runaway job under one mem_exclusive cpuset cannot cause the killing of a job in another such cpuset that might be using very high compute and memory resources for a prolonged time. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpusets: formalize intermediate GFP_KERNEL containmentPaul Jackson2005-09-071-8/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] completely disable cpu_exclusive sched domainPaul Jackson2005-08-261-0/+13
| | | | | | | | | | | | | | | | | | | | At the suggestion of Nick Piggin and Dinakar, totally disable the facility to allow cpu_exclusive cpusets to define dynamic sched domains in Linux 2.6.13, in order to avoid problems first reported by John Hawkes (corrupt sched data structures and kernel oops). This has been built for ppc64, i386, ia64, x86_64, sparc, alpha. It has been built, booted and tested for cpuset functionality on an SN2 (ia64). Dinakar or Nick - could you verify that it for sure does avoid the problems Hawkes reported. Hawkes is out of town, and I don't have the recipe to reproduce what he found. Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] undo partial cpu_exclusive sched domain disablingPaul Jackson2005-08-261-19/+0
| | | | | | | | | | | | | | | | The partial disabling of Dinakar's new facility to allow cpu_exclusive cpusets to define dynamic sched domains doesn't go far enough. At the suggestion of Nick Piggin and Dinakar, let us instead totally disable this facility for 2.6.13, in order to avoid problems first reported by John Hawkes (corrupt sched data structures and kernel oops). This patch removes the partial disabling code in 2.6.13-rc7, in anticipation of the next patch, which will totally disable it instead. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpu_exclusive sched domains build fixPaul Jackson2005-08-241-1/+3
| | | | | | | | | | | | | | | | | | | As reported by Paul Mackerras <paulus@samba.org>, the previous patch "cpu_exclusive sched domains fix" broke the ppc64 build with CONFIC_CPUSET, yielding error messages: kernel/cpuset.c: In function 'update_cpu_domains': kernel/cpuset.c:648: error: invalid lvalue in unary '&' kernel/cpuset.c:648: error: invalid lvalue in unary '&' On some arch's, the node_to_cpumask() is a function, returning a cpumask_t. But the for_each_cpu_mask() requires an lvalue mask. The following patch fixes this build failure by making a copy of the cpumask_t on the stack. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpu_exclusive sched domains on partial nodes temp fixPaul Jackson2005-08-231-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | This keeps the kernel/cpuset.c routine update_cpu_domains() from invoking the sched.c routine partition_sched_domains() if the cpuset in question doesn't fall on node boundaries. I have boot tested this on an SN2, and with the help of a couple of ad hoc printk's, determined that it does indeed avoid calling the partition_sched_domains() routine on partial nodes. I did not directly verify that this avoids setting up bogus sched domains or avoids the oops that Hawkes saw. This patch imposes a silent artificial constraint on which cpusets can be used to define dynamic sched domains. This patch should allow proceeding with this new feature in 2.6.13 for the configurations in which it is useful (node alligned sched domains) while avoiding trying to setup sched domains in the less useful cases that can cause the kernel corruption and oops. Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Dinakar Guniguntala <dino@in.ibm.com> Acked-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpuset release ABBA deadlock fixPaul Jackson2005-08-091-20/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix possible cpuset_sem ABBA deadlock if 'notify_on_release' set. For a particular usage pattern, creating and destroying cpusets fairly frequently using notify_on_release, on a very large system, this deadlock can be seen every few days. If you are not using the cpuset notify_on_release feature, you will never see this deadlock. The existing code, on task exit (or cpuset deletion) did: get cpuset_sem if cpuset marked notify_on_release and is ready to release: compute cpuset path relative to /dev/cpuset mount point call_usermodehelper() forks /sbin/cpuset_release_agent with path drop cpuset_sem Unfortunately, the fork in call_usermodehelper can allocate memory, and allocating memory can require cpuset_sem, if the mems_generation values changed in the interim. This results in an ABBA deadlock, trying to obtain cpuset_sem when it is already held by the current task. To fix this, I put the cpuset path (which must be computed while holding cpuset_sem) in a temporary buffer, to be used in the call_usermodehelper call of /sbin/cpuset_release_agent only _after_ dropping cpuset_sem. So the new logic is: get cpuset_sem if cpuset marked notify_on_release and is ready to release: compute cpuset path relative to /dev/cpuset mount point stash path in kmalloc'd buffer drop cpuset_sem call_usermodehelper() forks /sbin/cpuset_release_agent with path free path The sharp eyed reader might notice that this patch does not contain any calls to kmalloc. The existing code in the check_for_release() routine was already kmalloc'ing a buffer to hold the cpuset path. In the old code, it just held the buffer for a few lines, over the cpuset_release_agent() call that in turn invoked call_usermodehelper(). In the new code, with the application of this patch, it returns that buffer via the new char **ppathbuf parameter, for later use and freeing in cpuset_release_agent(), which is called after cpuset_sem is dropped. Whereas the old code has just one call to cpuset_release_agent(), right in the check_for_release() routine, the new code has three calls to cpuset_release_agent(), from the various places that a cpuset can be released. This patch has been build and booted on SN2, and passed a stress test that previously hit the deadlock within a few seconds. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kernel/cpuset.c: add kerneldoc, fix typosRandy Dunlap2005-07-271-7/+19
| | | | | | | | | | | Add kerneldoc to kernel/cpuset.c Fix cpuset typos in init/Kconfig Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud