summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] libata: implement presence detection via polling IDENTIFYTejun Heo2006-12-011-0/+3
| | | | | | | | | | | | | | | | | | | On some controllers (ICHs in piix mode), there is *NO* reliable way to determine device presence other than issuing IDENTIFY and see how the transaction proceeds by watching the TF status register. libata acted this way before irq-pio and phantom devices caused very little problem but now that IDENTIFY is performed using IRQ drive PIO, such phantom devices now result in multiple 30sec timeouts during boot. This patch implements ATA_FLAG_DETECT_POLLING. If a LLD sets this flag, libata core issues the initial IDENTIFY in polling mode and if the initial data transfer fails w/ HSM violation, the port is considered to be empty thus replicating the old libata and IDE behavior. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: use FLUSH_EXT only when driver is larger than LBA28 limitTejun Heo2006-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Many drives support LBA48 even when its capacity is smaller than 1<<28, as LBA48 is required for many functionalities. FLUSH_EXT is mandatory for drives w/ LBA48 support. Interestingly, at least one of such drives (ST960812A) has problems dealing with FLUSH_EXT. It eventually completes the command but takes around 7 seconds to finish in many cases thus drastically slowing down IO transactions. This seems to be a firmware bug which sneaked into production probably because no other ATA driver including linux IDE issues FLUSH_EXT to drives which report support for LBA48 & FLUSH_EXT but is smaller than 1<<28 blocks. This patch adds ATA_DFLAG_FLUSH_EXT which is set iff the drive supports LBA48 & FLUSH_EXT and is larger than LBA28 limit. Both cache flush paths are updated to issue FLUSH_EXT only when the flag is set. Note that the changed behavior is more inline with the rest of libata. libata prefers shorter commands whenever possible. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Danny Kukawka <dkukawka@novell.com> Cc: Stefan Seyfried <seife@novell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] ARM: add ixp4xx PATA driverAlessandro Zummo2006-12-011-0/+13
| | | | | Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: implement ATA_EHI_SETMODE and ATA_EHI_POST_SETMODETejun Heo2006-12-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | libata EH used to perform ata_set_mode() iff the EH session performed reset as indicated by ATA_EHI_DID_RESET. This is incorrect because ->dev_config() called by revalidation is allowed to modify transfer mode which ata_set_mode() should take care of. This patch implements the following two flags. * ATA_EHI_SETMODE: set during EH to schedule ata_set_mode(). Both new device attachment and revalidation set this flag. * ATA_EHI_POST_SETMODE: set while the device is revalidated after ata_set_mode(). Post-setmode revalidation is different from initial configuaration and EH revalidation in that ->dev_config() is not allowed tune transfer mode. LLD can use this flag to determine whether it's allowed to tune transfer mode. Note that POST_SETMODE ->dev_config() is guaranteed to be preceded by non-POST_SETMODE ->dev_config(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: implement ATA_EHI_PRINTINFOTejun Heo2006-12-011-0/+1
| | | | | | | | | | | | | Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: separate out and export sata_port_hardreset()Tejun Heo2006-12-011-0/+2
| | | | | | | | Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: move ata_irq_on() into libata-sff.cTejun Heo2006-12-011-31/+0
| | | | | | | | | | ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: handle 0xff status properlyTejun Heo2006-12-011-5/+4
| | | | | | | | | | | | | | | | | | | | libata waits for !BSY even when the status register reports 0xff. This causes long boot delays when D8 isn't pulled down properly. This patch does the followings. * don't wait if status register is 0xff in all wait functions * make ata_busy_sleep() return 0 on success and -errno on failure. -ENODEV is returned on 0xff status and -EBUSY on other failures. * make ata_bus_softreset() succeed on 0xff status. 0xff status is not reset failure. It indicates no device. This removes unnecessary retries on such ports. Note that the code change assumes unoccupied port reporting 0xff status does not produce valid device signature. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Joe Jin <lkmaillist@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] ata: Generic platform_device libata driverPaul Mundt2006-12-011-0/+13
| | | | | | | | | | | needs a changelog Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: Revamp blacklist support to allow multiple kinds of ↵Alan Cox2006-12-011-0/+3
| | | | | | | | | | blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: add 40pin "short" cable support, honour drive side speed ↵Alan Cox2006-12-011-2/+12
| | | | | | | | | | | detection [deweerdt@free.fr: build fix] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Frederik Deweerdt <deweerdt@free.fr> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2006-12-0120-182/+172
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (31 commits) [MIPS] Remove duplicate ISA DMA code for 0 DMA channel case. [MIPS] Remove unused definition of cpu_to_lelongp() [MIPS] Remove userspace proofing from <asm/bitops.h>. [MIPS] Remove old junk left from old atomic_lock. [MIPS] Use conditional traps for BUG_ON on MIPS II and better. [MIPS] mips HPT cleanup: make clocksource_mips public [MIPS] do_IRQ cleanup [MIPS] Avoid dupliate D-cache flush on R400C / R4400 SC and MC variants. [MIPS] Remove redundant r4k_blast_icache() calls [MIPS] Work around bogus gcc warnings. [MIPS] Fix double inclusions [MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irq [MIPS] IRQ cleanups [MIPS] mips hpt cleanup: get rid of mips_hpt_init [MIPS] PB1200: Remove duplicate definitions [MIPS] Fix alignment hole in struct cache_desc; shrink struct. [MIPS] Oprofile: kernel support for the R10000. [MIPS] Remove unused R10000 performance counter definitions. [MIPS] Add support for kexec [MIPS] Don't print presence of WAIT instruction on bootup. ...
| * [MIPS] Remove duplicate ISA DMA code for 0 DMA channel case.Ralf Baechle2006-11-301-0/+2
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Remove unused definition of cpu_to_lelongp()Ralf Baechle2006-11-301-2/+0
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Remove userspace proofing from <asm/bitops.h>.Ralf Baechle2006-11-301-42/+21
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Remove old junk left from old atomic_lock.Ralf Baechle2006-11-301-9/+1
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Use conditional traps for BUG_ON on MIPS II and better.Ralf Baechle2006-11-302-2/+12
| | | | | | | | | | | | | | This shaves of around 4kB and a few cycles for the average kernel that has CONFIG_BUG enabled. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] mips HPT cleanup: make clocksource_mips publicAtsushi Nemoto2006-11-301-4/+4
| | | | | | | | | | | | | | | | Make clocksource_mips public and get rid of mips_hpt_read, mips_hpt_mask. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] do_IRQ cleanupAtsushi Nemoto2006-11-301-6/+0
| | | | | | | | | | | | | | | | | | Now we have both function and macro version of do_IRQ() and the former is used only by DEC and non-preemptive kernel. This patch makes everyone use the macro version and removes the function version. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irqAtsushi Nemoto2006-11-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Further incorporation of generic irq framework. Replacing __do_IRQ() by proper flow handler would make the irq handling path a bit simpler and faster. * use generic_handle_irq() instead of __do_IRQ(). * use handle_level_irq for obvious level-type irq chips. * use handle_percpu_irq for irqs marked as IRQ_PER_CPU. * setup .eoi routine for irq chips possibly used with handle_percpu_irq. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] IRQ cleanupsAtsushi Nemoto2006-11-301-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a big irq cleanup patch. * Use set_irq_chip() to register irq_chip. * Initialize .mask, .unmask, .mask_ack field. Functions for these method are already exist in most case. * Do not initialize .startup, .shutdown, .enable, .disable fields if default routines provided by irq_chip_set_defaults() were suitable. * Remove redundant irq_desc initializations. * Remove unnecessary local_irq_save/local_irq_restore, spin_lock. With this cleanup, it would be easy to switch to slightly lightwait irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ(). Though whole this patch is quite large, changes in each irq_chip are not quite simple. Please review and test on your platform. Thanks. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] mips hpt cleanup: get rid of mips_hpt_initAtsushi Nemoto2006-11-301-1/+0
| | | | | | | | | | | | | | | | | | Currently nobody outside time.c require mips_hpt_init(). Remove it and call c0_hpt_timer_init() directly if R4k counter was used for timer interrupt. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Fix alignment hole in struct cache_desc; shrink struct.Ralf Baechle2006-11-301-5/+5
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Remove unused R10000 performance counter definitions.Ralf Baechle2006-11-301-56/+0
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Add support for kexecNicolas Schichan2006-11-302-0/+34
| | | | | | | | | | | | | | | | | | A tiny userland application loading the kernel and invoking kexec_load for mips is available here: http://chac.le-poulpe.net/~nico/kexec/kexec-2006-10-18.tar.gz Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=nAtsushi Nemoto2006-11-301-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Rewrite GALILEO_INL/GALILEO_OUTL to GT_READ/GT_WRITEYoichi Yuasa2006-11-303-28/+43
| | | | | | | | | | | | | | | | This patch has rewritten GALILEO_INL/GALILEO_OUTL using GT_READ/GT_WRITE. This patch tested on Cobalt Qube2. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Use "long" for 64-bit values on 64-bit kernel.Atsushi Nemoto2006-11-301-18/+22
| | | | | | | | | | | | | | This would get rid of some warnings about "long" vs. "long long". Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Introduce __pa_symbol()Franck Bui-Huu2006-11-301-0/+1
| | | | | | | | | | | | | | | | | | | | This patch introduces __pa_symbol() macro which should be used to calculate the physical address of kernel symbols. It also relies on RELOC_HIDE() to avoid any compiler's oddities when doing arithmetics on symbols. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Make __pa() aware of XKPHYS/CKSEG0 address mix for 64 bit kernelsFranck Bui-Huu2006-11-301-2/+7
| | | | | | | | | | | | | | | | | | | | During early boot mem init, some configs couldn't use __pa() to convert virtual into physical addresses. Specially for 64 bit kernel cases when CONFIG_BUILD_ELF64=n. This patch make __pa() work for _all_ configs and thus make CPHYSADDR() useless. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] page.h: remove __pa() usages.Franck Bui-Huu2006-11-303-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __pa() was used by virt_to_page() and virt_addr_valid(). These latter are used when kernel is initialised so __pa() is not appropriate, we use virt_to_phys() instead. Futhermore __pa() is going to take care of CKSEG0/XKPHYS address mix for 64 bit kernels. This makes __pa() more complex than virt_to_phys() and this extra work is not needed by virt_to_page() and virt_addr_valid(). Eventually it consolidates virt_to_phys() prototype by making its argument 'const'. this avoids some warnings that was due to some virt_to_page() usages which pass const pointer. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2006-12-012-7/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (25 commits) IB/ucm: Fix deadlock in cleanup IB/cm: Fix automatic path migration support IPoIB: Fix skb leak when freeing neighbour IB/srp: Fix memory leak on reconnect RDMA/addr: list_move() cleanups RDMA/addr: Fix some cancellation problems in process_req() RDMA/amso1100: Prevent deadlock in destroy QP IB/mthca: Fix initial SRQ logsize for mem-free HCAs IB/ehca: Use WQE offset instead of WQE addr for pending work reqs RDMA/iwcm: Fix comment for iwcm_deref_id() to match code RDMA/iwcm: Remove unnecessary function argument RDMA/iwcm: Remove unnecessary initializations RDMA/iwcm: Fix memory leak RDMA/iwcm: Fix memory corruption bug in cm_work_handler() IB: Convert kmem_cache_t -> struct kmem_cache IB/ipath: Fix typo in pma_counter_select subscript RDMA/amso1100: Fix section mismatches IB/mthca: Fix section mismatches IB/srp: Increase supported CDB size RDMA/cm: Remove setting local write as part of QP access flags ...
| * | IB/cm: Fix automatic path migration supportSean Hefty2006-11-292-7/+16
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ib_cm_establish() function is replaced with a more generic ib_cm_notify(). This routine is used to notify the CM that failover has occurred, so that future CM messages (LAP, DREQ) reach the remote CM. (Currently, we continue to use the original path) This bumps the userspace CM ABI. New alternate path information is captured when a LAP message is sent or received. This allows QP attributes to be initialized for the user when a new path is loaded after failover occurs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2006-12-011-16/+165
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits) usbcore: remove unused argument in autosuspend USB: keep count of unsuspended children USB hub: simplify remote-wakeup handling USB: struct usb_device: change flag to bitflag OHCI: make autostop conditional on CONFIG_PM USB: Add autosuspend support to the hub driver EHCI: Fix root-hub and port suspend/resume problems USB: create a new thread for every USB device found during the probe sequence USB: add driver for the USB debug devices USB: added dynamic major number for USB endpoints USB: pegasus error path not resetting task's state USB: endianness fix for asix.c USB: build the appledisplay driver USB serial: replace kmalloc+memset with kzalloc USB: hid-core: canonical defines for Apple USB device IDs USB: idmouse cleanup USB: make drivers/usb/core/driver.c:usb_device_match() static USB: lh7a40x_udc remove double declaration USB: pxa2xx_udc recognizes ixp425 rev b0 chip usbtouchscreen: add support for DMC TSC-10/25 devices ...
| * | USB: keep count of unsuspended childrenAlan Stern2006-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as818b) simplifies autosuspend processing by keeping track of the number of unsuspended children of each USB hub. This will permit us to avoid a good deal of unnecessary work all the time; we will no longer have to create a bunch of workqueue entries to carry out autosuspend requests, only to have them fail because one of the hub's children isn't suspended. The basic idea is simple. There already is a usage counter in the usb_device structure for preventing autosuspends. The patch just increments that counter for every unsuspended child. There's only one tricky part: When a device disconnects we need to remember whether it was suspended at the time (leave the counter alone) or not (decrement the counter). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: struct usb_device: change flag to bitflagAlan Stern2006-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as816) changes an existing flag in the usb_device structure to a bitflag, preparing the way for more bitflags to come in the future. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: expand autosuspend/autoresume APIAlan Stern2006-12-011-3/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as814) adds usb_autopm_set_interface() to the autosuspend API. It also provides convenient wrapper routines, usb_autopm_enable() and usb_autopm_disable(), for drivers that want to specify directly whether autosuspend should be allowed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: makes usb_endpoint_* functions inline.Luiz Fernando N. Capitulino2006-12-011-11/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have no benefits of having the usb_endpoint_* functions as functions, but making them inline saves text and data segment sizes: text data bss dec hex filename 14893634 3108770 1108840 19111244 1239d4c vmlinux.func 14893185 3108566 1108840 19110591 1239abf vmlinux.inline This is the result of a 2.6.19-rc3 kernel compiled with GCC 4.1.1 without CONFIG_MODULES, CONFIG_CC_OPTIMIZE_FOR_SIZE, CONFIG_REGPARM options set. USB support is fully enabled (while most of the other drivers are not), and that kernel has most of the USB code ported to use the endpoint functions. That happens because a call to those functions are expensive (in terms of bytes), while the function's size is smaller or have the same 'size' of the call. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb/hub: allow hubs up to 31 childreninaky@linux.intel.com2006-12-011-1/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current Wireless USB host hardware (Intel i1480 for example) allows up to 22 devices to connect, thus bringing up the max number of children in the WUSB Host Controller to 22 'fake' ports. Upcoming hardware might raise that limit. Makes almost no difference to go to 31, as the bit arrays are byte-aligned (plus an extra bit in general), so 22 bits fit in 4 bytes as 31 do. As well, the only other array that depends on USB_MAXCHILDREN is 'struct usb_hub->indicator'. By declaring it 'u8' instead of 'enum hub_led_mode', we reduce the size of each entry from 4 bytes (in i386) to 1, which will add as we when are doubling USB_MAXCHILDREN (with 16 the size of that array is 64 bytes, with 31 would be 128; by using u8 that goes down to 31 bytes). Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2006-12-0114-43/+82
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits) PCI: make arch/i386/pci/common.c:pci_bf_sort static PCI: ibmphp_pci.c: fix NULL dereference pciehp: remove unnecessary pci_disable_msi pciehp: remove unnecessary free_irq PCI: rpaphp: change device tree examination PCI: Change memory allocation for acpiphp slots i2c-i801: SMBus patch for Intel ICH9 PCI: irq: irq and pci_ids patch for Intel ICH9 PCI: pci_{enable,disable}_device() nestable ports PCI: switch pci_{enable,disable}_device() to be nestable PCI: arch/i386/kernel/pci-dma.c: ioremap balanced with iounmap pci/i386: style cleanups PCI: Block on access to temporarily unavailable pci device pci: fix __pci_register_driver error handling pci: clear osc support flags if no _OSC method acpiphp: fix missing acpiphp_glue_exit() acpiphp: fix use of list_for_each macro Altix: Initial ACPI support - ROM shadowing. Altix: SN ACPI hotplug support. Altix: Add initial ACPI IO support ...
| * | PCI: irq: irq and pci_ids patch for Intel ICH9Jason Gaston2006-12-011-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | This updated patch adds the Intel ICH9 LPC and SMBus Controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: switch pci_{enable,disable}_device() to be nestableInaky Perez-Gonzalez2006-12-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes the pci_{enable,disable}_device() functions to work in a nested basis, so that eg, three calls to enable_device() require three calls to disable_device(). The reason for this is to simplify PCI drivers for multi-interface/capability devices. These are devices that cram more than one interface in a single function. A relevant example of that is the Wireless [USB] Host Controller Interface (similar to EHCI) [see http://www.intel.com/technology/comms/wusb/whci.htm]. In these kind of devices, multiple interfaces are accessed through a single bar and IRQ line. For that, the drivers map only the smallest area of the bar to access their register banks and use shared IRQ handlers. However, because the order at which those drivers load cannot be known ahead of time, the sequence in which the calls to pci_enable_device() and pci_disable_device() cannot be predicted. Thus: 1. driverA starts pci_enable_device() 2. driverB starts pci_enable_device() 3. driverA shutdown pci_disable_device() 4. driverB shutdown pci_disable_device() between steps 3 and 4, driver B would loose access to it's device, even if it didn't intend to. By using this modification, the device won't be disabled until all the callers to enable() have called disable(). This is implemented by replacing 'struct pci_dev->is_enabled' from a bitfield to an atomic use count. Each caller to enable increments it, each caller to disable decrements it. When the count increments from 0 to 1, __pci_enable_device() is called to actually enable the device. When it drops to zero, pci_disable_device() actually does the disabling. We keep the backend __pci_enable_device() for pci_default_resume() to use and also change the sysfs method implementation, so that userspace enabling/disabling the device doesn't disable it one time too much. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Altix: Initial ACPI support - ROM shadowing.John Keller2006-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support a shadowed ROM when running with an ACPI capable PROM. Define a new dev.resource flag IORESOURCE_ROM_BIOS_COPY to describe the case of a BIOS shadowed ROM, which can then be used to avoid pci_map_rom() making an unneeded call to pci_enable_rom(). Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Altix: Add initial ACPI IO supportJohn Keller2006-12-017-14/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First phase in introducing ACPI support to SN. In this phase, when running with an ACPI capable PROM, the DSDT will define the root busses and all SN nodes (SGIHUB, SGITIO). An ACPI bus driver will be registered for the node devices, with the acpi_pci_root_driver being used for the root busses. An ACPI vendor descriptor is now used to pass platform specific information for both nodes and busses, eliminating the need for the current SAL calls. Also, with ACPI support, SN fixup code is no longer needed to initiate the PCI bus scans, as the acpi_pci_root_driver does that. However, to maintain backward compatibility with non-ACPI capable PROMs, none of the current 'fixup' code can been deleted, though much restructuring has been done. For example, the bulk of the code in io_common.c is relocated code that is now common regardless of what PROM is running, while io_acpi_init.c and io_init.c contain routines specific to an ACPI or non ACPI capable PROM respectively. A new pci bus fixup platform vector has been created to provide a hook for invoking platform specific bus fixup from pcibios_fixup_bus(). The size of io_space[] has been increased to support systems with large IO configurations. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: Replace HAVE_ARCH_PCI_MWI with PCI_DISABLE_MWIMatthew Wilcox2006-12-011-13/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pSeries is the only architecture left using HAVE_ARCH_PCI_MWI and it's really inappropriate for its needs. It really wants to disable MWI altogether. So here are a pair of stub implementations for pci_set_mwi and pci_clear_mwi. Also rename pci_generic_prep_mwi to pci_set_cacheline_size since that better reflects what it does. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: Use pci_generic_prep_mwi on sparc64Matthew Wilcox2006-12-011-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The setting of the CACHE_LINE_SIZE register in sparc64's pci initialisation code isn't quite adequate as the device may have incompatible requirements. The generic code tests for this, so switch sparc64 over to using it. Since sparc64 has different L1 cache line size and PCI cache line size, it would need to override the generic code like i386 and ia64 do. We know what the cache line size is at compile time though, so introduce a new optional constant PCI_CACHE_LINE_BYTES. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: Use pci_generic_prep_mwi on ia64Matthew Wilcox2006-12-011-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pci_generic_prep_mwi() code does everything that pcibios_prep_mwi() does on ia64. All we need to do is be sure that pci_cache_line_size is set appropriately, and we can delete pcibios_prep_mwi(). Using SMP_CACHE_BYTES as the default was wrong on uniprocessor machines as it is only 8 bytes. The default in the generic code of L1_CACHE_BYTES is at least as good. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: Make some MSI-X #defines genericMichael Ellerman2006-12-011-0/+6
| |/ | | | | | | | | | | | | | | | | Move some MSI-X #defines into pci_regs.h so they can be used outside of drivers/pci. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2006-12-0137-22/+283
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) Driver core: show drivers in /sys/module/ Documentation/driver-model/platform.txt update/rewrite Driver core: platform_driver_probe(), can save codespace driver core: Use klist_remove() in device_move() driver core: Introduce device_move(): move a device to a new parent. Driver core: make drivers/base/core.c:setup_parent() static driver core: Introduce device_find_child(). sysfs: sysfs_write_file() writes zero terminated data cpu topology: consider sysfs_create_group return value Driver core: Call platform_notify_remove later ACPI: Change ACPI to use dev_archdata instead of firmware_data Driver core: add dev_archdata to struct device Driver core: convert sound core to use struct device Driver core: change mem class_devices to be real devices Driver core: convert fb code to use struct device Driver core: convert firmware code to use struct device Driver core: convert mmc code to use struct device Driver core: convert ppdev code to use struct device Driver core: convert PPP code to use struct device Driver core: convert cpuid code to use struct device ...
| * | Driver core: show drivers in /sys/module/Kay Sievers2006-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Show the drivers, which belong to the module: $ ls -l /sys/module/usbcore/drivers/ hub -> ../../../bus/usb/drivers/hub usb -> ../../../bus/usb/drivers/usb usbfs -> ../../../bus/usb/drivers/usbfs Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud