summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] md: tidy up raid5/6 hash table codeNeilBrown2006-01-061-2/+2
| | | | | | | | | | | | | - replace open-coded hash chain with hlist macros - Fix hash-table size at one page - it is already quite generous, so there will never be a need to use multiple pages, so no need for __get_free_pages No functional change. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: raid10 read-error handling - resync and read-onlyNeilBrown2006-01-061-0/+7
| | | | | | | | | | | | | | | | | | Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: auto-correct correctable read errors in raid10NeilBrown2006-01-061-0/+2
| | | | | | | | Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix up some rdev rcu locking in raid5/6NeilBrown2006-01-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | There is this "FIXME" comment with a typo in it!! that been annoying me for days, so I just had to remove it. conf->disks[i].rdev should only be accessed if - we know we hold a reference or - the mddev->reconfig_sem is down or - we have a rcu_readlock handle_stripe was referencing rdev in three places without any of these. For the first two, get an rcu_readlock. For the last, the same access (md_sync_acct call) is made a little later after the rdev has been claimed under and rcu_readlock, if R5_Syncio is set. So just use that access... However R5_Syncio isn't really needed as the 'syncing' variable contains the same information. So use that instead. Issues, comment, and fix are identical in raid5 and raid6. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: handle errors when read-onlyNeilBrown2006-01-061-0/+7
| | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: attempt to auto-correct read errors in raid1NeilBrown2006-01-061-0/+3
| | | | | | | | | | | | | | On a read-error we suspend the array, then synchronously read the block from other arrays until we find one where we can read it. Then we try writing the good data back everywhere and make sure it works. If any write or subsequent read fails, only then do we fail the device out of the array. To be able to suspend the array, we need to also keep track of how many requests are queued for handling by raid1d. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix raid6 resync check/repair codeNeilBrown2006-01-061-0/+2
| | | | | | | | | | | | | | | | | | raid6 currently does not check the P/Q syndromes when doing a resync, it just calculates the correct value and writes it. Doing the check can reduce writes (often to 0) for a resync, and it is needed to properly implement the echo check > sync_action operation. This patch implements the appropriate checks and tidies up some related code. It also allows raid6 user-requested resync to bypass the intent bitmap. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: write intent bitmap support for raid10NeilBrown2006-01-061-1/+8
| | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow dirty raid[456] arrays to be started at bootNeilBrown2006-01-061-0/+1
| | | | | | | | See patch to md.txt for more details Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improve raid10 "IO Barrier" conceptNeilBrown2006-01-061-2/+2
| | | | | | | | | | | | | raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improve raid1 "IO Barrier" conceptNeilBrown2006-01-061-2/+2
| | | | | | | | | | | | | raid1 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper ioctl: add skip lock_fs flagAlasdair G Kergon2006-01-061-3/+8
| | | | | | | | | | | | Add ioctl DM_SKIP_LOCKFS_FLAG for userspace to request that lock_fs is bypassed when suspending a device. There's no change to the behaviour of existing code that doesn't know about the new flag. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] knfsd: check error status from vfs_getattr and i_op->fsyncDavid Shaw2006-01-062-0/+4
| | | | | | | | | | | | | | | | | Both vfs_getattr and i_op->fsync return error statuses which nfsd was largely ignoring. This as noticed when exporting directories using fuse. This patch cleans up most of the offences, which involves moving the call to vfs_getattr out of the xdr encoding routines (where it is too late to report an error) into the main NFS procedure handling routines. There is still a called to vfs_gettattr (related to the ACL code) where the status is ignored, and called to nfsd_sync_dir don't check return status either. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jbd: split checkpoint listsJan Kara2006-01-061-1/+7
| | | | | | | | | | | | Split the checkpoint list of the transaction into two lists. In the first list we keep the buffers that need to be submitted for IO. In the second list are kept buffers that were already submitted and we just have to wait for the IO to complete. This should simplify a handling of checkpoint lists a bit and can eventually be also a performance gain. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] include/linux/parport_pc.h: "extern inline" -> "static inline"Adrian Bunk2006-01-061-1/+1
| | | | | | | | "extern inline" doesn't make much sense. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: DEBUG_PARPORT build fixMarko Kohtala2006-01-061-1/+1
| | | | | | | | | Add missing "struct" keyword preventing compilation with DEBUG_PARPORT defined. Also add some "const". Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: phase fixesMarko Kohtala2006-01-061-1/+0
| | | | | | | | | | Did not move the parport interface properly into IEEE1284_PH_REV_IDLE phase at end of data due to comparing bytes with nibbles. Internal phase IEEE1284_PH_HBUSY_DNA became unused, so remove it. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fuse: make maximum write data configurableMiklos Szeredi2006-01-061-2/+9
| | | | | | | | | | | | | | | Make the maximum size of write data configurable by the filesystem. The previous fixed 4096 limit only worked on architectures where the page size is less or equal to this. This change make writing work on other architectures too, and also lets the filesystem receive bigger write requests in direct_io mode. Normal writes which go through the page cache are still limited to a page sized chunk per request. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fuse: clean up request size limit checkingMiklos Szeredi2006-01-061-6/+2
| | | | | | | | | | | | | | | | | | | | | Change the way a too large request is handled. Until now in this case the device read returned -EINVAL and the operation returned -EIO. Make it more flexibible by not returning -EINVAL from the read, but restarting it instead. Also remove the fixed limit on setxattr data and let the filesystem provide as large a read buffer as it needs to handle the extended attribute data. The symbolic link length is already checked by VFS to be less than PATH_MAX, so the extra check against FUSE_SYMLINK_MAX is not needed. The check in fuse_create_open() against FUSE_NAME_MAX is not needed, since the dentry has already been looked up, and hence the name already checked. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fuse: add frsize to statfs replyMiklos Szeredi2006-01-061-0/+5
| | | | | | | | | | | | Add 'frsize' member to the statfs reply. I'm not sure if sending f_fsid will ever be needed, but just in case leave some space at the end of the structure, so less compatibility mess would be required. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fuse: bump interface versionMiklos Szeredi2006-01-061-1/+1
| | | | | | | | | | | Change interface version to 7.4. Following changes will need backward compatibility support, so store the minor version returned by userspace. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: BugfixesMarkus Lidel2006-01-061-1/+1
| | | | | | | | | | | | | | | - Removed some kmalloc's with __GFP_ZERO and replace it with memset() because it didn't work properly. - Fixed returned message frame in i2o_cfg_passthru() which caused raidutils to display wrong error message in case a disk was missing. - Fixed size of printk() in i2o_scsi.c. - Fixed get_device() and put_device() in probing of the I2O controller. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: Remove wrong I2O device classMarkus Lidel2006-01-061-1/+0
| | | | | | | | Removed wrong I2O device class, which was only needed to add sysfs attributes. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: changed I2O API to create I2O messages in kernel memoryMarkus Lidel2006-01-061-423/+552
| | | | | | | | | | Changed the I2O API to create I2O messages first in kernel memory and then transfer it at once over the PCI bus instead of sending each quad-word over the PCI bus. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: cleanup KconfigMartin Schwidefsky2006-01-062-2/+2
| | | | | | | | | | Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: qdio V=V pass-throughFrank Pavlic2006-01-061-3/+5
| | | | | | | | | | | | | | | | | | | New feature V=V qdio pass-through. QDIO and HiperSockets processing in z/VM V=V guest environments (as well as V=R with z/VM running in LPAR mode) requires shadowing of all QDIO architecture queue elements. Especially the shadowing of SBALs and SLSBs structures in the hypervisor, and the need to issue SIGA SYNC operations to observe state changes, eventually causes significant CPU processing overhead in the hypervisor. The QDIO pass-through support for V=V guests avoids the shadowing of SBALs and SLSBs. This significantly reduces the hypervisor overhead for QDIO based I/O. Signed-off-by: Frank Pavlic <pavlic@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: move s390_root_dev_* out of the cio layerCarsten Otte2006-01-062-3/+15
| | | | | | | | | | Extract the s390_root_dev_* functions from the common I/O layer as they are also used by non-ccw device drivers. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: uaccess warningsMartin Schwidefsky2006-01-061-6/+8
| | | | | | | | | Convert __access_ok to an inline C function and change __get_user primitive to avoid uaccess compiler warnings. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: cms volume label definitionsPeter Oberparleiter2006-01-061-0/+24
| | | | | | | | | | Moved definition of CMS volume label to vtoc.h and modify partitions/ibm.c to use this volume label definition instead of anonymous array. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: atomic primitivesMartin Schwidefsky2006-01-061-103/+70
| | | | | | | | | | | | | | | | | | | Hugh Dickins <hugh@veritas.com> Fix the broken atomic_cmpxchg primitive. Add atomic_sub_and_test, atomic64_sub_return, atomic64_sub_and_test, atomic64_cmpxchg, atomic64_add_unless and atomic64_inc_not_zero. Replace old style atomic_compare_and_swap by atomic_cmpxchg. Shorten the whole header by defining most primitives with the two inline functions atomic_add_return and atomic_sub_return. In addition this patch contains the s390 related fixes of Hugh's "mm: fill arch atomic64 gaps" patch. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: remove enable_irq_nosync()Christoph Hellwig2006-01-063-9/+0
| | | | | | | | | | m68k, m68knommu and h8300 define this, but it's not actually used anywhere. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: enable_irq/disable_irqChristoph Hellwig2006-01-061-2/+2
| | | | | | | | | | mach_enable_irq/mach_disable_irq are never actually set, so let's remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m32r: Remove unnecessary icu_data_t definitionsHirokazu Takata2006-01-061-5/+2
| | | | | | | | | | This patch removes unnecessary struct icu_data_t definitions of arch/m32r/kernel/setup_*.c. Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m32r: Update _port2addr to use NONCACHE_OFFSETHirokazu Takata2006-01-061-1/+1
| | | | | | | | | | | | Modify _port2addr*() routines in arch/m32r/kernel/io_*.c to use NONCACHE_OFFSET instead of hard-coding of a constant address. This modification is also required to support an M3A-ZA36 FPGA eva board in case an MMU-less synthesizable m32r core is used. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m32r: Update syscall macros for MMU-less targetsHirokazu Takata2006-01-061-6/+6
| | | | | | | | | | | | | | | | This patch is for updating m32r's MMU-less support. Some legacy MMU-less m32r chips cannot return from a trap handler to the right-hand side 16-bit halfword code of a 32-bit instrucion code pair, because a "trap" instruction specification was expanded in M32R-II ISA. This modification forces "trap" instructions to be placed in word alignment location with a parallel "nop" code. Signed-off-by: Kazuhiro Inaoka <inaoka@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m32r: Support M32104UT target platformHirokazu Takata2006-01-067-18/+222
| | | | | | | | | | | | | | | | | This patch is for supporting a new target platform, Renesas M32104UT evaluation board. The M32104UT is an eval board based on an uT-Engine specification. This board has an MMU-less M32R family processor, M32104. http://www-wa0.personal-media.co.jp/pmc/archive/te/te_m32104_e.pdf This board is one of the most popular M32R platform, so we have ported Linux/M32R to it. Signed-off-by: Naoto Sugai <Sugai.Naoto@ak.MitsubishiElectric.co.jp> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: add a new function (needed for swap suspend)Rafael J. Wysocki2006-01-061-0/+1
| | | | | | | | | | | | | | | | This adds the function get_swap_page_of_type() allowing us to specify an index in swap_info[] and select a swap_info_struct structure to be used for allocating a swap page. This function (or another one of similar functionality) will be necessary for implementing the image-writing part of swsusp in the user space.  It can also be used for simplifying the current in-kernel implementation of the image-writing part of swsusp. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] swsusp: improve freeing of memoryRafael J. Wysocki2006-01-061-1/+1
| | | | | | | | | | | | | | | This patch makes swsusp free only as much memory as needed to complete the suspend and not as much as possible.  In the most of cases this should speed up the suspend and make the system much more responsive after resume, especially if a GUI (eg. X Windows) is used. If needed, the old behavior (ie to free as much memory as possible during suspend) can be restored by unsetting FAST_FREE in power.h Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] swsusp: introduce the swap map structureRafael J. Wysocki2006-01-061-5/+1
| | | | | | | | | | | | | | | | | | | | | This patch introduces the swap map structure that can be used by swsusp for keeping tracks of data pages written to the swap.  The structure itself is described in a comment within the patch. The overall idea is to reduce the amount of metadata written to the swap and to write and read the image pages sequentially, in a file-alike way. This makes the swap-handling part of swsusp fairly independent of its snapshot-handling part and will hopefully allow us to completely separate these two parts in the future. This patch is needed to remove the suspend image size limit imposed by the limited size of the swsusp_info structure, which is essential for x86-64 systems with more than 512 MB of RAM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Alpha: convert to generic irq framework (alpha part)Ivan Kokshaysky2006-01-061-0/+2
| | | | | | | | | | Kconfig tweaks and tons of deletions. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Christoph Hellwig <hch@lst.de> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Alpha: convert to generic irq framework (generic part)Ivan Kokshaysky2006-01-061-0/+11
| | | | | | | | | | | | | | | Thanks to Christoph for doing most of the work. This allows automatic SMP IRQ affinity assignment other than default "all interrupts on all CPUs" which is rather expensive. This might be useful if the hardware can be programmed to distribute interrupts among different CPUs, like Alpha does. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Christoph Hellwig <hch@lst.de> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpu hotplug/x86_64: disable interrupt in play_deadShaohua Li2006-01-061-0/+2
| | | | | | | | | | | With physical CPU hotplug, the CPU is hot removed and it should not receive any interrupts. Disabling interrupt is much safer. This basically is what we do in ia64 & x86. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mpspec: remove unneeded packed attributeBrian Gerst2006-01-062-2/+2
| | | | | | | | | | | | | GCC 4.1 gives the following warning: include/asm/mpspec.h:79: warning: `packed' attribute ignored for field of type `unsigned char' The packed attribute isn't really necessary anyways so just remove it. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Acked-by: Dave Jones <davej@codemonkey.org.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Base support for AMD Geode GX/LX processorsJordan Crouse2006-01-062-1/+13
| | | | | | | | | Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: fls() in asmStephen Hemminger2006-01-061-5/+17
| | | | | | | | | There is a single instruction on i386 to find largest set bit; so it makes sense to use it (like we use bfs for ffs()). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: convert bigsmp to use flat physical modeAshok Raj2006-01-062-45/+38
| | | | | | | | | | | | | | | | | | | | | | | | When we bring up a new CPU via INIT/startup IPI messages, the CPU that's coming up sends a xTPR message to the chipset. Intel chipsets (at least) don't provide any architectural guarantee on what the chipset will do with this message. For example, the E850x chipsets uses this xTPR message to interpret the interrupt operating mode of the platform. When the CPU coming online sends this message, it always indicates that it is in logical flat mode. For the CPU hotplug case, the platform may already be functioning in cluster APIC mode at this time, the chipset can get confused and mishandle I/O device and IPI interrupt routing. The situation eventually gets corrected when the new CPU sends another xTPR update when we switch it to cluster mode, but there's a window during which the chipset may be in an inconsistent state. This patch avoids this problem by using the flat physical interrupt delivery mode instead of cluster mode for bigsmp (>8 cpu) support. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86/x86_64: mark rodata section read-only: x86-64 supportArjan van de Ven2006-01-061-0/+4
| | | | | | | | | | x86-64 specific parts to make the .rodata section read only Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86/x86_64: mark rodata section read only: generic x86-64 bugfixArjan van de Ven2006-01-061-0/+2
| | | | | | | | | | | | | | | | | Bug fix required for the .rodata work on x86-64: when change_page_attr() and friends need to break up a 2Mb page into 4Kb pages, it always set the NX bit on the PMD, which causes the cpu to consider the entire 2Mb region to be NX regardless of the actual PTE perms. This is fine in general, with one big exception: the 2Mb page that covers the last part of the kernel .text! The fix is to not invent a new permission for the new PMD entry, but to just inherit the existing one minus the PSE bit. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86/x86_64: mark rodata section read only: x86 partsArjan van de Ven2006-01-061-0/+4
| | | | | | | | | | | x86 specific parts to make the .rodata section read only Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86/x86_64: mark rodata section read only: generic infrastructureArjan van de Ven2006-01-061-0/+4
| | | | | | | | | | | | | | Generic prep-work for marking the .rodata section readonly: * Align the rodata section at 4Kb boundary * call the mark_rodata_ro() function when available Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud