summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] VM: add page_state info to per-node meminfoMartin Hicks2005-09-051-0/+1
| | | | | | | | | | | | | | | Add page_state info to the per-node meminfo file in sysfs. This is mostly just for informational purposes. The lack of this information was brought up recently during a discussion regarding pagecache clearing, and I put this patch together to test out one of the suggestions. It seems like interesting info to have, so I'm submitting the patch. Signed-off-by: Martin Hicks <mort@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: avoid some atomic operations during address space destructionZachary Amsden2005-09-051-0/+14
| | | | | | | | | | | | | | | Any architecture that has hardware updated A/D bits that require synchronization against other processors during PTE operations can benefit from doing non-atomic PTE updates during address space destruction. Originally done on i386, now ported to x86_64. Doing a read/write pair instead of an xchg() operation saves the implicit lock, which turns out to be a big win on 32-bit (esp w PAE). Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: ptep_clear optimizationZachary Amsden2005-09-052-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new accessor for PTEs, which passes the full hint from the mmu_gather struct; this allows architectures with hardware pagetables to optimize away atomic PTE operations when destroying an address space. Removing the locked operation should allow better pipelining of memory access in this loop. I measured an average savings of 30-35 cycles per zap_pte_range on the first 500 destructions on Pentium-M, but I believe the optimization would win more on older processors which still assert the bus lock on xchg for an exclusive cacheline. Update: I made some new measurements, and this saves exactly 26 cycles over ptep_get_and_clear on Pentium M. On P4, with a PAE kernel, this saves 180 cycles per ptep_get_and_clear, for a whopping 92160 cycles savings for a full address space destruction. pte_clear_full is not yet used, but is provided for future optimizations (in particular, when running inside of a hypervisor that queues page table updates, the full hint allows us to avoid queueing unnecessary page table update for an address space in the process of being destroyed. This is not a huge win, but it does help a bit, and sets the stage for further hypervisor optimization of the mm layer on all architectures. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Christoph Lameter <christoph@lameter.com> Cc: <linux-mm@kvack.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sab: consolidate kmem_bufctl_tKyle Moffett2005-09-0522-43/+0
| | | | | | | | | | | This is used only in slab.c and each architecture gets to define whcih underlying type is to be used. Seems a bit silly - move it to slab.c and use the same type for all architectures: unsigned int. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove hugetlb_clean_stale_pgtable() and fix huge_pte_alloc()Chen, Kenneth W2005-09-053-8/+0
| | | | | | | | | | | | | | | | | | | | | | | I don't think we need to call hugetlb_clean_stale_pgtable() anymore in 2.6.13 because of the rework with free_pgtables(). It now collect all the pte page at the time of munmap. It used to only collect page table pages when entire one pgd can be freed and left with staled pte pages. Not anymore with 2.6.13. This function will never be called and We should turn it into a BUG_ON. I also spotted two problems here, not Adam's fault :-) (1) in huge_pte_alloc(), it looks like a bug to me that pud is not checked before calling pmd_alloc() (2) in hugetlb_clean_stale_pgtable(), it also missed a call to pmd_free_tlb. I think a tlb flush is required to flush the mapping for the page table itself when we clear out the pmd pointing to a pte page. However, since hugetlb_clean_stale_pgtable() is never called, so it won't trigger the bug. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: Adam Litke <agl@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hugetlb: add pte_huge() macroAdam Litke2005-09-052-2/+5
| | | | | | | | | | | This patch adds a macro pte_huge(pte) for i386/x86_64 which is needed by a patch later in the series. Instead of repeating (_PAGE_PRESENT | _PAGE_PSE), I've added __LARGE_PTE to i386 to match x86_64. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: <linux-mm@kvack.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] arm: allow for arch-specific IOREMAP_MAX_ORDERDeepak Saxena2005-09-051-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Version 6 of the ARM architecture introduces the concept of 16MB pages (supersections) and 36-bit (40-bit actually, but nobody uses this) physical addresses. 36-bit addressed memory and I/O and ARMv6 can only be mapped using supersections and the requirement on these is that both virtual and physical addresses be 16MB aligned. In trying to add support for ioremap() of 36-bit I/O, we run into the issue that get_vm_area() allows for a maximum of 512K alignment via the IOREMAP_MAX_ORDER constant. To work around this, we can: - Allocate a larger VM area than needed (size + (1ul << IOREMAP_MAX_ORDER)) and then align the pointer ourselves, but this ends up with 512K of wasted VM per ioremap(). - Provide a new __get_vm_area_aligned() API and make __get_vm_area() sit on top of this. I did this and it works but I don't like the idea adding another VM API just for this one case. - My preferred solution which is to allow the architecture to override the IOREMAP_MAX_ORDER constant with it's own version. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: correct _PAGE_FILE commentPaolo 'Blaisorblade' Giarrusso2005-09-053-9/+11
| | | | | | | | | | | _PAGE_FILE does not indicate whether a file is in page / swap cache, it is set just for non-linear PTE's. Correct the comment for i386, x86_64, UML. Also clearify _PAGE_NONE. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] comment typo fixPaolo 'Blaisorblade' Giarrusso2005-09-051-1/+1
| | | | | | | | smp_entry_t -> swap_entry_t Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] VM: add capabilites check to set_zone_reclaimMartin Hicks2005-09-051-0/+1
| | | | | | | | | Add a capability check to sys_set_zone_reclaim(). This syscall is not something that should be available to a user. Signed-off-by: Martin Hicks <mort@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: remove atomicNick Piggin2005-09-051-0/+1
| | | | | | | | | This bitop does not need to be atomic because it is performed when there will be no references to the page (ie. the page is being freed). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] /proc/<pid>/numa_maps to show on which nodes pages resideChristoph Lameter2005-09-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch was recently discussed on linux-mm: http://marc.theaimsgroup.com/?t=112085728500002&r=1&w=2 I inherited a large code base from Ray for page migration. There was a small patch in there that I find to be very useful since it allows the display of the locality of the pages in use by a process. I reworked that patch and came up with a /proc/<pid>/numa_maps that gives more information about the vma's of a process. numa_maps is indexes by the start address found in /proc/<pid>/maps. F.e. with this patch you can see the page use of the "getty" process: margin:/proc/12008 # cat maps 00000000-00004000 r--p 00000000 00:00 0 2000000000000000-200000000002c000 r-xp 00000000 08:04 516 /lib/ld-2.3.3.so 2000000000038000-2000000000040000 rw-p 00028000 08:04 516 /lib/ld-2.3.3.so 2000000000040000-2000000000044000 rw-p 2000000000040000 00:00 0 2000000000058000-2000000000260000 r-xp 00000000 08:04 54707842 /lib/tls/libc.so.6.1 2000000000260000-2000000000268000 ---p 00208000 08:04 54707842 /lib/tls/libc.so.6.1 2000000000268000-2000000000274000 rw-p 00200000 08:04 54707842 /lib/tls/libc.so.6.1 2000000000274000-2000000000280000 rw-p 2000000000274000 00:00 0 2000000000280000-20000000002b4000 r--p 00000000 08:04 9126923 /usr/lib/locale/en_US.utf8/LC_CTYPE 2000000000300000-2000000000308000 r--s 00000000 08:04 60071467 /usr/lib/gconv/gconv-modules.cache 2000000000318000-2000000000328000 rw-p 2000000000318000 00:00 0 4000000000000000-4000000000008000 r-xp 00000000 08:04 29576399 /sbin/mingetty 6000000000004000-6000000000008000 rw-p 00004000 08:04 29576399 /sbin/mingetty 6000000000008000-600000000002c000 rw-p 6000000000008000 00:00 0 [heap] 60000fff7fffc000-60000fff80000000 rw-p 60000fff7fffc000 00:00 0 60000ffffff44000-60000ffffff98000 rw-p 60000ffffff44000 00:00 0 [stack] a000000000000000-a000000000020000 ---p 00000000 00:00 0 [vdso] cat numa_maps 2000000000000000 default MaxRef=43 Pages=11 Mapped=11 N0=4 N1=3 N2=2 N3=2 2000000000038000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2 2000000000040000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1 2000000000058000 default MaxRef=43 Pages=61 Mapped=61 N0=14 N1=15 N2=16 N3=16 2000000000268000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2 2000000000274000 default MaxRef=1 Pages=3 Mapped=3 Anon=3 N0=3 2000000000280000 default MaxRef=8 Pages=3 Mapped=3 N0=3 2000000000300000 default MaxRef=8 Pages=2 Mapped=2 N0=2 2000000000318000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N2=1 4000000000000000 default MaxRef=6 Pages=2 Mapped=2 N1=2 6000000000004000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1 6000000000008000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1 60000fff7fffc000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1 60000ffffff44000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1 getty uses ld.so. The first vma is the code segment which is used by 43 other processes and the pages are evenly distributed over the 4 nodes. The second vma is the process specific data portion for ld.so. This is only one page. The display format is: <startaddress> Links to information in /proc/<pid>/map <memory policy> This can be "default" "interleave={}", "prefer=<node>" or "bind={<zones>}" MaxRef= <maximum reference to a page in this vma> Pages= <Nr of pages in use> Mapped= <Nr of pages with mapcount > Anon= <nr of anonymous pages> Nx= <Nr of pages on Node x> The content of the proc-file is self-evident. If this would be tied into the sparsemem system then the contents of this file would not be too useful. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] swap: swap_lock replace list+deviceHugh Dickins2005-09-051-9/+2
| | | | | | | | | | | | | | | | | | | | | | | | | The idea of a swap_device_lock per device, and a swap_list_lock over them all, is appealing; but in practice almost every holder of swap_device_lock must already hold swap_list_lock, which defeats the purpose of the split. The only exceptions have been swap_duplicate, valid_swaphandles and an untrodden path in try_to_unuse (plus a few places added in this series). valid_swaphandles doesn't show up high in profiles, but swap_duplicate does demand attention. However, with the hold time in get_swap_pages so much reduced, I've not yet found a load and set of swap device priorities to show even swap_duplicate benefitting from the split. Certainly the split is mere overhead in the common case of a single swap device. So, replace swap_list_lock and swap_device_lock by spinlock_t swap_lock (generally we seem to prefer an _ in the name, and not hide in a macro). If someone can show a regression in swap_duplicate, then probably we should add a hashlock for the swap_map entries alone (shorts being anatomic), so as to help the case of the single swap device too. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] swap: scan_swap_map drop swap_device_lockHugh Dickins2005-09-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | get_swap_page has often shown up on latency traces, doing lengthy scans while holding two spinlocks. swap_list_lock is already dropped, now scan_swap_map drop swap_device_lock before scanning the swap_map. While scanning for an empty cluster, don't worry that racing tasks may allocate what was free and free what was allocated; but when allocating an entry, check it's still free after retaking the lock. Avoid dropping the lock in the expected common path. No barriers beyond the locks, just let the cookie crumble; highest_bit limit is volatile, but benign. Guard against swapoff: must check SWP_WRITEOK before allocating, must raise SWP_SCANNING reference count while in scan_swap_map, swapoff wait for that to fall - just use schedule_timeout, we don't want to burden scan_swap_map itself, and it's very unlikely that anyone can really still be in scan_swap_map once swapoff gets this far. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] swap: swap unsigned int consistencyHugh Dickins2005-09-051-3/+3
| | | | | | | | | | | | The swap header's unsigned int last_page determines the range of swap pages, but swap_info has been using int or unsigned long in some cases: use unsigned int throughout (except, in several places a local unsigned long is useful to avoid overflows when adding). Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] swap: show span of swap extentsHugh Dickins2005-09-051-1/+0
| | | | | | | | | | | | | The "Adding %dk swap" message shows the number of swap extents, as a guide to how fragmented the swapfile may be. But a useful further guide is what total extent they span across (sometimes scarily large). And there's no need to keep nr_extents in swap_info: it's unused after the initial message, so save a little space by keeping it on stack. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] swap: swap extent list is orderedHugh Dickins2005-09-051-2/+0
| | | | | | | | | | | | | | | | There are several comments that swap's extent_list.prev points to the lowest extent: that's not so, it's extent_list.next which points to it, as you'd expect. And a couple of loops in add_swap_extent which go all the way through the list, when they should just add to the other end. Fix those up, and let map_swap_page search the list forwards: profiles shows it to be twice as quick that way - because prefetch works better on how the structs are typically kmalloc'ed? or because usually more is written to than read from swap, and swap is allocated ascendingly? Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: consolidate get_orderStephen Rothwell2005-09-0522-312/+69
| | | | | | | | | | | | Someone mentioned that almost all the architectures used basically the same implementation of get_order. This patch consolidates them into asm-generic/page.h and includes that in the appropriate places. The exceptions are ia64 and ppc which have their own (presumably optimised) versions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sparsemem extreme: hotplug preparationDave Hansen2005-09-051-0/+1
| | | | | | | | | | | | | This splits up sparse_index_alloc() into two pieces. This is needed because we'll allocate the memory for the second level in a different place from where we actually consume it to keep the allocation from happening underneath a lock Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Bob Picco <bob.picco@hp.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sparsemem extreme implementationBob Picco2005-09-051-25/+15
| | | | | | | | | | | | | | | | | | | | | | | | With cleanups from Dave Hansen <haveblue@us.ibm.com> SPARSEMEM_EXTREME makes mem_section a one dimensional array of pointers to mem_sections. This two level layout scheme is able to achieve smaller memory requirements for SPARSEMEM with the tradeoff of an additional shift and load when fetching the memory section. The current SPARSEMEM implementation is a one dimensional array of mem_sections which is the default SPARSEMEM configuration. The patch attempts isolates the implementation details of the physical layout of the sparsemem section array. SPARSEMEM_EXTREME requires bootmem to be functioning at the time of memory_present() calls. This is not always feasible, so architectures which do not need it may allocate everything statically by using SPARSEMEM_STATIC. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] SPARSEMEM EXTREMEBob Picco2005-09-052-2/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new option for SPARSEMEM is ARCH_SPARSEMEM_EXTREME. Architecture platforms with a very sparse physical address space would likely want to select this option. For those architecture platforms that don't select the option, the code generated is equivalent to SPARSEMEM currently in -mm. I'll be posting a patch on ia64 ml which uses this new SPARSEMEM feature. ARCH_SPARSEMEM_EXTREME makes mem_section a one dimensional array of pointers to mem_sections. This two level layout scheme is able to achieve smaller memory requirements for SPARSEMEM with the tradeoff of an additional shift and load when fetching the memory section. The current SPARSEMEM -mm implementation is a one dimensional array of mem_sections which is the default SPARSEMEM configuration. The patch attempts isolates the implementation details of the physical layout of the sparsemem section array. ARCH_SPARSEMEM_EXTREME depends on 64BIT and is by default boolean false. I've boot tested under aim load ia64 configured for ARCH_SPARSEMEM_EXTREME. I've also boot tested a 4 way Opteron machine with !ARCH_SPARSEMEM_EXTREME and tested with aim. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove driverfs references from include/linux/cpu.h and ↵Rolf Eike Beer2005-09-021-1/+1
| | | | | | | | | | net/sunrpc/rpc_pipe.c This patch is against 2.6.10, but still applies cleanly. It's just s/driverfs/sysfs/ in these two files. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: need pfn_valid macroGreg Ungerer2005-09-021-2/+3
| | | | | | | | Need pfn_valid macro, even on MMUless platforms. Enclose the macro args of __pa and __va in parentheses. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-serial Linus Torvalds2005-09-023-10/+20
|\
| * [SERIAL] Move serial8250_*_port prototypes to linux/serial_8250.hRussell King2005-09-011-0/+16
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 2866/1: add i.MX set_mctrl / get_mctrl functionsSascha Hauer2005-08-312-6/+0
| | | | | | | | | | | | | | | | | | | | Patch from Sascha Hauer This patch adds support for setting and getting RTS / CTS via set_mtctrl / get_mctrl functions. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] Clean up and fix tty transmission start/stopingRussell King2005-08-311-4/+4
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The start_tx and stop_tx methods were passed a flag to indicate whether the start/stop was from the tty start/stop callbacks, and some drivers used this flag to decide whether to ask the UART to immediately stop transmission (where the UART supports such a feature.) There are other cases when we wish this to occur - when CTS is lowered, or if we change from soft to hard flow control and CTS is inactive. In these cases, this flag was false, and we would allow the transmitter to drain before stopping. There is really only one case where we want to let the transmitter drain before disabling, and that's when we run out of characters to send. Hence, re-jig the start_tx and stop_tx methods to eliminate this flag, and introduce new functions for the special "disable and allow transmitter to drain" case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | \ Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-arm Linus Torvalds2005-09-021-1/+1
|\ \ \
| * | | [ARM] 2865/2: fix fadvise64_64 syscall argument passingNicolas Pitre2005-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Nicolas Pitre The prototype for sys_fadvise64_64() is: long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice) The argument list is therefore as follows on legacy ABI: fd: type int (r0) offset: type long long (r1-r2) len: type long long (r3-sp[0]) advice: type int (sp[4]) With EABI this becomes: fd: type int (r0) offset: type long long (r2-r3) len: type long long (sp[0]-sp[4]) advice: type int (sp[8]) Not only do we have ABI differences here, but the EABI version requires one additional word on the syscall stack. To avoid the ABI mismatch and the extra stack space required with EABI this syscall is now defined with a different argument ordering on ARM as follows: long sys_arm_fadvise64_64(int fd, int advice, loff_t offset, loff_t len) This gives us the following ABI independent argument distribution: fd: type int (r0) advice: type int (r1) offset: type long long (r2-r3) len: type long long (sp[0]-sp[4]) Now, since the syscall entry code takes care of 5 registers only by default including the store of r4 to the stack, we need a wrapper to store r5 to the stack as well. Because that wrapper was missing and was always required this means that sys_fadvise64_64 never worked on ARM and therefore we can safely reuse its syscall number for our new sys_arm_fadvise64_64 interface. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge refs/heads/ieee80211-wifi from ↵Linus Torvalds2005-09-023-133/+224
|\ \ \ \ | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| * \ \ \ /spare/repo/netdev-2.6 branch 'master'Jeff Garzik2005-09-01226-1887/+8937
| |\ \ \ \ | | | |/ / | | |/| |
| * | | | [PATCH] ieee80211: Fix debug comments ipw->ieee80211Jouni Malinen2005-08-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debug variables and procfs dir should be "ieee80211", not "ipw". Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | | | [PATCH] ieee80211: Remove EAPOL debugJouni Malinen2005-08-281-31/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IEEE 802.11 code has no business touching payloads of EAPOL frames. There are some EAPOL structures defined for debugging and these were confusingly called EAP types which they are not. Let's just remove these before someone else starts using them in the kernel. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | | | [PATCH] ieee80211: Remove WIRELESS_EXT < 17 supportJouni Malinen2005-08-281-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need to maintain support for WIRELESS_EXT < 17 since this kernel tree is already using WIRELESS_EXT 18. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | | | ieee80211: use endian-aware typesJiri Benc2005-08-251-24/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Michael Wu <flamingice@sourmilk.net> This patch: - fixes misc. whitespace/comments - replaces u16 with __le16/__be16 where appropriate Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Jiri Benc <jbenc@suse.cz>
| * | | | ieee80211: convert defines to enumsJiri Benc2005-08-251-81/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Gertjan van Wingerde <gwingerde@home.nl> Attached patch cleans up the long lists of #defines for status codes, reason codes, and information elements. Signed-off-by: Gertjan van Wingerde <gwingerde@home.nl> Signed-off-by: Jiri Benc <jbenc@suse.cz>
| * | | | ieee80211: new constants from latest 802.11x specificationsJiri Benc2005-08-251-14/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Gertjan van Wingerde <gwingerde@home.nl> Attached patch updates the definitions of the generic ieee80211 stack to the latest versions of the published 802.11x specification suite. Signed-off-by: Gertjan van Wingerde <gwingerde@home.nl> Signed-off-by: Jiri Benc <jbenc@suse.cz>
| * | | | ieee80211: Puts debug macros together and makes escape_essid not inlined.Jiri Benc2005-08-251-25/+12
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: Jirka Bohac <jbohac@suse.cz>
| * | | | Merge upstream into ieee80211.Jeff Garzik2005-08-2430-93/+133
| |\ \ \ \ | | | | | | | | | | | | | | | | | | Hand-fix merge conflict in drivers/usb/net/zd1201.c.
| * | | | | ieee80211: remove last uses of compat define WLAN_CAPABILITY_BSSJeff Garzik2005-08-151-1/+0
| | | | | |
| * | | | | [PATCH] ieee80211: Capability field is called ESS, not BSSJouni Malinen2005-08-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IEEE 802.11 has a capability field flag called ESS, but ieee80211 had renamed this to BSS for some reason. hostap has been using WLAN_CAPABILITY_ESS and since that matches with the standard, lets use it as the name for this define. Add WLAN_CAPABILITY_BSS as a backwards compatibility name for the same bit since ieee80211 and ipw2200 are using this and there are versions outside kernel tree that expect to find this define name. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | | | | Merge /spare/repo/linux-2.6/Jeff Garzik2005-08-1438-67/+242
| |\ \ \ \ \
| * | | | | | [PATCH] ieee80211: Fix frame control pver maskJouni Malinen2005-08-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IEEE 802.11 frame control has two bits reserved for protocol version. IEEE80211_FCTL_VERS was not used anywhere, but I would assume it was supposed to be a mask for the protocol field and as such, it should be 0x0003, not 0x0002. This matches with WLAN_FC_PVER definition in hostap. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | | | | | [PATCH] include/net/ieee80211.h must #include <linux/wireless.h>Adrian Bunk2005-07-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -Wundef found an (although perhaps harmless) bug: <-- snip --> ... CC net/ieee80211/ieee80211_crypt.o In file included from net/ieee80211/ieee80211_crypt.c:21: include/net/ieee80211.h:26:5: warning: "WIRELESS_EXT" is not defined CC net/ieee80211/ieee80211_crypt_wep.o In file included from net/ieee80211/ieee80211_crypt_wep.c:20: include/net/ieee80211.h:26:5: warning: "WIRELESS_EXT" is not defined CC net/ieee80211/ieee80211_crypt_ccmp.o CC net/ieee80211/ieee80211_crypt_tkip.o In file included from net/ieee80211/ieee80211_crypt_tkip.c:23: include/net/ieee80211.h:26:5: warning: "WIRELESS_EXT" is not defined ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | | | | | /spare/repo/netdev-2.6 branch 'master'Jeff Garzik2005-07-30295-1544/+33938
| |\ \ \ \ \ \
| * \ \ \ \ \ \ Merge upstream 2.6.13-rc3 into ieee80211 branch of netdev-2.6.Jeff Garzik2005-07-13195-3489/+4619
| |\ \ \ \ \ \ \
| * \ \ \ \ \ \ \ Merge upstream 2.6.13-rc1-git1 into 'ieee80211' branch of netdev-2.6.Jeff Garzik2005-06-3067-814/+675
| |\ \ \ \ \ \ \ \
| * | | | | | | | | wireless: fix ipw warning; add is_broadcast_ether_addr() to linux/etherdevice.hJeff Garzik2005-06-281-0/+6
| | | | | | | | | |
| * | | | | | | | | Merge /spare/repo/linux-2.6/Jeff Garzik2005-06-2814-39/+375
| |\ \ \ \ \ \ \ \ \
| * \ \ \ \ \ \ \ \ \ Merge upstream net/ieee80211.h changes into 'ieee80211' branch.Jeff Garzik2005-06-272-12/+1
| |\ \ \ \ \ \ \ \ \ \
OpenPOWER on IntegriCloud