summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* fs_enet: Remove unused fields in the fs_mii_bb_platform_info structure.Laurent Pinchart2008-07-221-4/+0
| | | | | | | | | | The mdio_port, mdio_bit, mdc_port and mdc_bit fields in the fs_mii_bb_platform_info structure are left-overs from the move to the Phy Abstraction Layer subsystem. They are not used anymore and can be safely removed. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ipv6: __KERNEL__ ifdef struct ipv6_devconfDavid S. Miller2008-07-211-0/+2
| | | | | | Based upon a report by Olaf Hering. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Print the module name as part of the watchdog messageArjan van de Ven2008-07-211-0/+2
| | | | | | | | | | | As suggested by Dave: This patch adds a function to get the driver name from a struct net_device, and consequently uses this in the watchdog timeout handler to print as part of the message. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: nfnetlink_log: send complete hardware headerEric Leblond2008-07-211-0/+3
| | | | | | | | | | | | | This patch adds some fields to NFLOG to be able to send the complete hardware header with all necessary informations. It sends to userspace: * the type of hardware link * the lenght of hardware header * the hardware header Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: accounting rework: ct_extend + 64bit counters (v4)Krzysztof Piotr Oledzki2008-07-215-17/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | Initially netfilter has had 64bit counters for conntrack-based accounting, but it was changed in 2.6.14 to save memory. Unfortunately in-kernel 64bit counters are still required, for example for "connbytes" extension. However, 64bit counters waste a lot of memory and it was not possible to enable/disable it runtime. This patch: - reimplements accounting with respect to the extension infrastructure, - makes one global version of seq_print_acct() instead of two seq_print_counters(), - makes it possible to enable it at boot time (for CONFIG_SYSCTL/CONFIG_SYSFS=n), - makes it possible to enable/disable it at runtime by sysctl or sysfs, - extends counters from 32bit to 64bit, - renames ip_conntrack_counter -> nf_conn_counter, - enables accounting code unconditionally (no longer depends on CONFIG_NF_CT_ACCT), - set initial accounting enable state based on CONFIG_NF_CT_ACCT - removes buggy IPCT_COUNTER_FILLING event handling. If accounting is enabled newly created connections get additional acct extend. Old connections are not changed as it is not possible to add a ct_extend area to confirmed conntrack. Accounting is performed for all connections with acct extend regardless of a current state of "net.netfilter.nf_conntrack_acct". Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: add NLA_PUT_BE64 macroKrzysztof Piotr Oledzki2008-07-211-0/+3
| | | | | | | | Add NLA_PUT_BE64 macro required for 64bit counters in netfilter Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-2.6.27' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2008-07-208-34/+56
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: (51 commits) nfsd: nfs4xdr.c do-while is not a compound statement nfsd: Use C99 initializers in fs/nfsd/nfs4xdr.c lockd: Pass "struct sockaddr *" to new failover-by-IP function lockd: get host reference in nlmsvc_create_block() instead of callers lockd: minor svclock.c style fixes lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock lockd: nlm_release_host() checks for NULL, caller needn't file lock: reorder struct file_lock to save space on 64 bit builds nfsd: take file and mnt write in nfs4_upgrade_open nfsd: document open share bit tracking nfsd: tabulate nfs4 xdr encoding functions nfsd: dprint operation names svcrdma: Change WR context get/put to use the kmem cache svcrdma: Create a kmem cache for the WR contexts svcrdma: Add flush_scheduled_work to module exit function svcrdma: Limit ORD based on client's advertised IRD svcrdma: Remove unused wait q from svcrdma_xprt structure svcrdma: Remove unneeded spin locks from __svc_rdma_free svcrdma: Add dma map count and WARN_ON ...
| * lockd: Pass "struct sockaddr *" to new failover-by-IP functionChuck Lever2008-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Pass a more generic socket address type to nlmsvc_unlock_all_by_ip() to allow for future support of IPv6. Also provide additional sanity checking in failover_unlock_ip() when constructing the server's IP address. As an added bonus, provide clean kerneldoc comments on related NLM interfaces which were recently added. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lockJeff Layton2008-07-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nlmsvc_lock calls nlmsvc_lookup_host to find a nlm_host struct. The callers of this function, however, call nlmsvc_retrieve_args or nlm4svc_retrieve_args, which also return a nlm_host struct. Change nlmsvc_lock to take a host arg instead of calling nlmsvc_lookup_host itself and change the callers to pass a pointer to the nlm_host they've already found. Since nlmsvc_testlock() now just uses the caller's reference, we no longer need to get or release it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlockJeff Layton2008-07-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nlmsvc_testlock calls nlmsvc_lookup_host to find a nlm_host struct. The callers of this functions, however, call nlmsvc_retrieve_args or nlm4svc_retrieve_args, which also return a nlm_host struct. Change nlmsvc_testlock to take a host arg instead of calling nlmsvc_lookup_host itself and change the callers to pass a pointer to the nlm_host they've already found. We take a reference to host in the place where nlmsvc_testlock() previous did a new lookup, so the reference counting is unchanged from before. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * file lock: reorder struct file_lock to save space on 64 bit buildsRichard Kennedy2008-07-131-2/+2
| | | | | | | | | | | | | | | | | | Reduce sizeof struct file_lock by 8 on 64 bit builds allowing +1 objects per slab in the file_lock_cache Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * Merge branch 'for-bfields' of git://linux-nfs.org/~tomtucker/xprt-switch-2.6 ↵J. Bruce Fields2008-07-03316-624/+1074
| |\ | | | | | | | | | into for-2.6.27
| | * svcrdma: Change WR context get/put to use the kmem cacheTom Tucker2008-07-021-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | Change the WR context pool to be shared across mount points. This reduces the RDMA transport memory footprint significantly since idle mounts don't consume WR context memory. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
| | * svcrdma: Remove unused wait q from svcrdma_xprt structureTom Tucker2008-07-021-1/+0
| | | | | | | | | | | | | | | | | | The sc_read_wait queue head is no longer used. Remove it. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
| | * svcrdma: Add dma map count and WARN_ONTom Tucker2008-07-021-0/+1
| | | | | | | | | | | | | | | | | | | | | Add a dma map count in order to verify that all DMA mapping resources have been freed when the transport is closed. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
| | * svcrdma: Use reply and chunk map for RDMA_READ processingTom Tucker2008-07-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the RDMA_READ processing to use the reply and chunk list mapping data types. Also add a special purpose 'hdr_count' field in in the context to hold the header page count instead of overloading the SGE length field and corrupting the DMA map length. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
| | * svcrdma: Add a type for keeping NFS RPC mappingTom Tucker2008-07-021-0/+27
| | | | | | | | | | | | | | | | | | | | | Create a new data structure to hold the remote client address space to local server address space mapping. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
| * | gss_krb5: create a define for token header size and clean up ptr locationKevin Coffman2008-06-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cleanup: Document token header size with a #define instead of open-coding it. Don't needlessly increment "ptr" past the beginning of the header which makes the values passed to functions more understandable and eliminates the need for extra "krb5_hdr" pointer. Clean up some intersecting white-space issues flagged by checkpatch.pl. This leaves the checksum length hard-coded at 8 for DES. A later patch cleans that up. Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd: rename MAY_ flagsMiklos Szeredi2008-06-231-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename nfsd_permission() specific MAY_* flags to NFSD_MAY_* to make it clear, that these are not used outside nfsd, and to avoid name and number space conflicts with the VFS. [comment from hch: rename MAY_READ, MAY_WRITE and MAY_EXEC as well] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | sunrpc: remove sv_kill_signal field from svc_serv structJeff Layton2008-06-231-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since we no longer make any distinction between shutdown signals with nfsd, then it becomes easier to just standardize on a particular signal to use to bring it down (SIGINT, in this case). Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | knfsd: convert knfsd to kthread APIJeff Layton2008-06-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is rather large, but I couldn't figure out a way to break it up that would remain bisectable. It does several things: - change svc_thread_fn typedef to better match what kthread_create expects - change svc_pool_map_set_cpumask to be more kthread friendly. Make it take a task arg and and get rid of the "oldmask" - have svc_set_num_threads call kthread_create directly - eliminate __svc_create_thread Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | knfsd: Replace lock_kernel with a mutex for nfsd thread startup/shutdown ↵Neil Brown2008-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | locking. This removes the BKL from the RPC service creation codepath. The BKL really isn't adequate for this job since some of this info needs protection across sleeps. Also, add some comments to try and clarify how the locking should work and to make it clear that the BKL isn't necessary as long as there is adequate locking between tasks when touching the svc_serv fields. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd: eliminate unused nfs4_callback.cb_statBenny Halevy2008-06-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The cb_stat member of struct nfs4_callback is unused since commit ff7d9756 nfsd: use static memory for callback program and stats Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd: eliminate unused nfs4_callback.cb_programBenny Halevy2008-06-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The cb_program member of struct nfs4_callback unused since commit ff7d9756 nfsd: use static memory for callback program and stats Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd: remove three unused NFS4_ACE_* definesJ. Bruce Fields2008-06-231-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These flag bits aren't used by either the protocol or our implementation, so I don't know why they were here. Thanks to Johann Dahm for running across these. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Johann Dahm <jdahm@umich.edu>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-07-201-0/+2
|\ \ \ | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: pkt_sched: Fix build with NET_SCHED disabled.
| * | | pkt_sched: Fix build with NET_SCHED disabled.David S. Miller2008-07-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The stab bits can't be referenced uniless the full packet scheduler layer is enabled. Reported by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge branch 'for-linus' of git://git.o-hand.com/linux-mfdLinus Torvalds2008-07-201-90/+95
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: let asic3 use mem resource instead of bus_shift mfd: remove DS1WM register definitions from asic3.h mfd: add ASIC3_CONFIG_GPIO templates mfd: fix the asic3 irq demux code mfd: asic3 should depend on gpiolib mfd: fix asic3 config array initialisation mfd: move asic3 probe functions into __init section mfd: Use uppercase only for asic3 macros and defines mfd: use dev_* macros for asic3 debugging mfd: New asic3 gpio configuration code mfd: asic3 children platform data removal mfd: asic3 gpiolib support
| * | | | mfd: let asic3 use mem resource instead of bus_shiftPhilipp Zabel2008-07-201-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bus_shift parameter in platform_data is not needed as we can tell the driver with the IOMEM_RESOURCE whether the ASIC is located on a 16bit or 32bit memory bus. The htc-egpio driver uses a more descriptive bus_width parameter, but for drivers where the register map size fixed, we don't even need this. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | | | mfd: remove DS1WM register definitions from asic3.hPhilipp Zabel2008-07-201-35/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a dedicated ds1wm driver, no need to duplicate this information here. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | | | mfd: add ASIC3_CONFIG_GPIO templatesPhilipp Zabel2008-07-201-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As ASIC3 GPIO alternate function configuration is expected to be similar for several devices, it is convenient to define descriptive macros. This patch is inspired by the PXA MFP configuration, the alternate functions were observed on hx4700 and blueangel. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | | | mfd: Use uppercase only for asic3 macros and definesSamuel Ortiz2008-07-201-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's be consistent and use uppercase only, for both macro and defines. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mfd: New asic3 gpio configuration codeSamuel Ortiz2008-07-201-10/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ASIC3 GPIO configuration code is a bit obscure and hardly readable. This patch changes it so that it is now more readable and understandable, by being more explicit. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mfd: asic3 children platform data removalSamuel Ortiz2008-07-201-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform devices should be dynamically allocated, and each supported device should have its own platform data. For now we just remove this buggy code. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mfd: asic3 gpiolib supportSamuel Ortiz2008-07-201-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ASIC3 is, among other things, a GPIO extender. We should thus have it supporting the current gpiolib API. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds2008-07-2014-67/+135
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (277 commits) V4L/DVB (8415): gspca: Infinite loop in i2c_w() of etoms. V4L/DVB (8414): videodev/cx18: fix get_index bug and error-handling lock-ups V4L/DVB (8411): videobuf-dma-contig.c: fix 64-bit build for pre-2.6.24 kernels V4L/DVB (8410): sh_mobile_ceu_camera: fix 64-bit compiler warnings V4L/DVB (8397): video: convert select VIDEO_ZORAN_ZR36060 into depends on V4L/DVB (8396): video: Fix Kbuild dependency for VIDEO_IR_I2C V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c V4L/DVB (8394): ir-common: CodingStyle fix: move EXPORT_SYMBOL_GPL to their proper places V4L/DVB (8393): media/video: Fix depencencies for VIDEOBUF V4L/DVB (8392): media/Kconfig: Convert V4L1_COMPAT select into "depends on" V4L/DVB (8390): videodev: add comment and remove magic number. V4L/DVB (8389): videodev: simplify get_index() V4L/DVB (8387): Some cosmetic changes V4L/DVB (8381): ov7670: fix compile warnings V4L/DVB (8380): saa7115: use saa7115_auto instead of saa711x as the autodetect driver name. V4L/DVB (8379): saa7127: Make device detection optional V4L/DVB (8378): cx18: move cx18_av_vbi_setup to av-core.c and rename to cx18_av_std_setup V4L/DVB (8377): ivtv/cx18: ensure the default control values are correct V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup V4L/DVB (8374): gspca: No conflict of 0c45:6011 with the sn9c102 driver. ...
| * | | | | V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2cMauro Carvalho Chehab2008-07-201-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, saa7134 is dependent of ir-kbd-i2c, since it uses a symbol that is defined there. However, as this symbol is used only on saa7134, there's no sense on keeping it defined there (or on ir-commons). So, let's move it to saa7134 and remove one symbol for being exported. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8387): Some cosmetic changesHans Verkuil2008-07-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Those changes, together with some proper patches, will allow out-of-tree compilation for for kernels < 2.6.19 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8343): soc_camera_platform: Add SoC Camera Platform driverMagnus Damm2008-07-201-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a simple platform camera device. Useful for testing cameras with SoC camera host drivers. Only one single pixel format and resolution combination is supported. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8342): sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3Magnus Damm2008-07-201-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is V3 of the SuperH Mobile CEU soc_camera driver. The CEU hardware block is configured in a transparent data fetch mode, frames are captured from the attached camera and written to physically contiguous memory buffers provided by the newly added videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors. Changes since V2: - remove SUPERH Kconfig dependency - move sh_mobile_ceu.h to include/media - add board callback support with enable_camera()/disable_camera() - add support for declare_coherent_memory - rework video memory limit - more verbose error messages Changes since V1: - fixed the CEU driver to work with the newly updated patches Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8341): videobuf: Add physically contiguous queue code V3Magnus Damm2008-07-201-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is V3 of the physically contiguous videobuf queues patch. Useful for hardware such as the SuperH Mobile CEU which doesn't support scatter gatter bus mastering. Since it may be difficult to allocate large chunks of physically contiguous memory after some uptime due to fragmentation, this code allocates memory using dma_alloc_coherent(). Architectures supporting dma_declare_coherent_memory() can easily avoid fragmentation issues by using dma_declare_coherent_memory() to force dma_alloc_coherent() to allocate from a certain pre-allocated memory area. Changes since V2 - use dma_handle for physical address - use "scatter gather" instead of "scatter gatter" Changes since V1: - use dev_err() instead of pr_err() - remember size in struct videobuf_dma_contig_memory - keep struct videobuf_dma_contig_memory in .c file - let videobuf_to_dma_contig() return dma_addr_t - implement __videobuf_sync() - return statements, white space and other minor fixes Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8340): videobuf: Fix gather spellingMagnus Damm2008-07-202-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use "scatter gather" instead of "scatter gatter". Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8339): soc_camera: Add 16-bit bus width supportMagnus Damm2008-07-201-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SuperH Mobile CEU hardware supports 16-bit width bus, so extend the soc_camera code with SOCAM_DATAWIDTH_16. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8338): soc_camera: Move spinlocksMagnus Damm2008-07-201-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the spinlock handling from soc_camera.c to the actual camera host driver. The spinlock_alloc/free callbacks are replaced with code in init_videobuf(). So far all camera host drivers implement their own spinlock_alloc/free methods anyway, and videobuf_queue_core_init() BUGs on a NULL spinlock argument, so, new camera host drivers will not forget to provide a spinlock when initialising their videobuf queues. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8337): soc_camera: make videobuf independentPaulius Zaleckas2008-07-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Makes SoC camera videobuf independent. Includes all necessary changes for PXA camera driver (currently the only driver using soc_camera in the mainline). These changes are important for the future soc_camera based drivers. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8246): tvaudio: Stop I2C driver ID abuseJean Delvare2008-07-201-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tvaudio driver is using "official" I2C device IDs for internal purpose. There must be some historical reason behind this but anyway, it shouldn't do that. As the stored values are never used, the easiest way to fix the problem is simply to remove them altogether. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8245): ovcamchip: Delete stray I2C bus IDJean Delvare2008-07-201-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2C_HW_SMBUS_OVFX2 is referenced in ovcamchip_core.c, but no bus uses this driver ID, so we can remove the reference. As far as I can see, the Cypress FX2 webcam is handled by a different driver (dvb-usb). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | v4l-dvb: remove legacy checks to allow support for kernels < 2.6.10Hans Verkuil2008-07-202-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also remove some blank lines that were used to split compat code at -devel tree. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8197): gspca: pac207 frames no more decoded in the subdriver.Hans de Goede2008-07-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | videodev2: New pixfmt pac207: Remove the specific decoding. main: get_buff_size operation added for the subdriver. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | | V4L/DVB (8194): gspca: Fix the format of the low resolution mode of spca561.Hans de Goede2008-07-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The low (half) res modes of the spca561 are not spca561 compressed, but are raw bayer, this patches fixes this and adds a PIX_FMT define for the GBRG bayer format used by the spca561 in low res mode. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
OpenPOWER on IntegriCloud