summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] i386 CPU hotplugZwane Mwaikambo2005-06-253-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ppc32: Remove FSL OCP supportKumar Gala2005-06-252-58/+0
| | | | | | | | | | Support for the OCP device model on Freescale (FSL) PPC's is no longer used. All FSL PPC's that were using OCP have be converted to using the platform device model. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ppc32: Add support for Freescale e200 (Book-E) coreKumar Gala2005-06-255-3/+22
| | | | | | | | | | | | The e200 core is a Book-E core (similar to e500) that has a unified L1 cache and is not cache coherent on the bus. The e200 core also adds a separate exception level for debug exceptions. Part of this patch helps to cleanup a few cases that are true for all Freescale Book-E parts, not just e500. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mips: add MIPS-specific support for flatmem/discontigmemYoichi Yuasa2005-06-253-2/+6
| | | | | | | | | 2.6.12-git6 doesn't boot on some MIPS machines. They need the support of flat memory and discontig memory. Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I8K: use standard DMI interfaceDmitry Torokhov2005-06-251-0/+1
| | | | | | | | | | | | I8K: Change to use stock dmi infrastructure instead of homegrown parsing code. The driver now requires box's DMI data to match list of supported models so driver can be safely compiled-in by default without fear of it poking into random SMM BIOS code. DMI checks can be ignored with i8k.ignore_dmi option. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2005-06-254-7/+37
|\
| * [PATCH] ARM: Generic Dynamic Tick Timer support for ARM, take 4Russell King2005-06-252-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Dynamic Tick Timer for ARM. Dynamic Tick is also known as VST (Variable Scheduling Timeouts). Dynamic Tick has been in use in the OMAP tree since last October. The patch is not intrusive, and does not do anything unless CONFIG_NO_IDLE_HZ is defined. This patch has the following fixed based on comments from RMK: - Time is updated before calling interrupt handlers. - Added new interrupt flag SA_TIMER to avoid duplicate timer interrupts - Moved struct dyn_tick_timer to time.h until we at some point probably have an arch independent dyn-tick.h - Cleaned up testing for DYN_TICK_ENABLED in irq.c I've cleaned up this patch to fix some remaining issues: - Call the timer tick handler with irqs disabled, as it would be from a normal interrupt - if we have a dyn_tick, we better implement all methods. - generic timer_dyn_reprogram() call, to be called before sleeping - added command line option - "dyntick=" to allow boot-time control of this feature -- rmk Signed-off-by: Tony Lindgren Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [PATCH] ARM: 2752/1: disable ixp2000 PCI I/O software workaround on chips ↵Lennert Buytenhek2005-06-252-7/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | that don't need it Patch from Lennert Buytenhek The later ixp2000 models don't need the PCI I/O workaround that we currently perform. Add a config option to disable the workaround, and panic on boot if a kernel without the workaround is booted on a buggy chip. As only pre-production ixp2000s need the workaround, the default is for it not to be configured in. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [SPARC64]: Report any user access faults in termios accessors.David S. Miller2005-06-241-37/+41
|/ | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2005-06-246-42/+100
|\
| * [PATCH] ARM: 2748/1: ixp2000 implementation of the iomap apiLennert Buytenhek2005-06-241-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek A number of ixp2000 models have a bug where the byte lanes for PCI I/O transactions are swapped. We already work around this in our versions of {in,out}{b,w,l}, but we also need to perform these workarounds in a custom implementation of the new iomap API, provided in this patch. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [PATCH] ARM: 2747/1: allow platforms to provide their own iomap implementationLennert Buytenhek2005-06-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek This patch conditionalises the io{read,write}{8,16,32} defines and the prototypes for ioport_map/ioport_unmap in asm-arm/io.h on ioread8 not already having been defined. This is done so that platforms can provide their own implementation of the iomap API, ixp2000 for example needs this. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [PATCH] ARM: 2745/1: Fix IXP4xx debug macrosDeepak Saxena2005-06-242-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Deepak Saxena Current IXP4xx debug macros do not work in the small window between the MMU being enabled and the call to map_io() b/c the standard peripheral mapping is not properly setup for use with the low-level debug code. This patch creates a new section-aligned mapping for the UART specifically for use with the debug macros. Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [PATCH] ARM: 2744/1: ixp2000 gpio irq supportLennert Buytenhek2005-06-242-40/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek This patch cleans up the ixp2000 gpio irq code and implements the set_irq_type method for gpio irqs so that users can select for which events (falling edge/rising edge/level low/level high) on the gpio pin they want the corresponding gpio irq to be triggered. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [PATCH] ARM: 2740/1: ixp2000 align{b,w} need to parenthesize their argumentsLennert Buytenhek2005-06-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek Two macros that are used on the ixp2000 to fixup byte lane enables for I/O space accesses, align{b,w}, use their arguments without parenthesizing them. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] fs/qnx4/*: fix sparse warningsAlexey Dobriyan2005-06-242-17/+17
| | | | | | | | | | | | | | | | | | | | This patch fixes sparse warnings in the qnx4fs (and might even make qnx4fs work on big-endian boxes) Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Anders Larsen <al@alarsen.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Add "memory" clobbers to the x86 inline asm of strncmp and friendsLinus Torvalds2005-06-241-10/+22
|/ | | | | | | | | | They don't actually clobber memory, but gcc doesn't even know they _read_ memory, so can apparently re-order memory accesses around them. Which obviously does the wrong thing if the memory access happens to change the memory that the compare function is accessing.. Verified to fix a strange boot problem by Jens Axboe.
* Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2005-06-2410-13/+282
|\
| * [TCP]: Need to declare 'tcp_reno' in net/tcp.hDavid S. Miller2005-06-231-0/+1
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [PKT_SCHED]: Packet classification based on textsearch (ematch)Thomas Graf2005-06-233-2/+25
| | | | | | | | | | Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: skb_find_text() - Find a text pattern in skb dataThomas Graf2005-06-231-0/+5
| | | | | | | | | | | | | | | | | | | | Finds a pattern in the skb data according to the specified textsearch configuration. Use textsearch_next() to retrieve subsequent occurrences of the pattern. Returns the offset to the first occurrence or UINT_MAX if no match was found. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: Zerocopy sequential reading of skb dataThomas Graf2005-06-231-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implements sequential reading for both linear and non-linear skb data at zerocopy cost. The data is returned in chunks of arbitary length, therefore random access is not possible. Usage: from := 0 to := 128 state := undef data := undef len := undef consumed := 0 skb_prepare_seq_read(skb, from, to, &state) while (len = skb_seq_read(consumed, &data, &state)) != 0 do /* do something with 'data' of length 'len' */ if abort then /* abort read if we don't wait for * skb_seq_read() to return 0 */ skb_abort_seq_read(&state) return endif /* not necessary to consume all of 'len' */ consumed += len done Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [LIB]: Naive finite state machine based textsearchThomas Graf2005-06-231-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A finite state machine consists of n states (struct ts_fsm_token) representing the pattern as a finite automation. The data is read sequentially on a octet basis. Every state token specifies the number of recurrences and the type of value accepted which can be either a specific character or ctype based set of characters. The available type of recurrences include 1, (0|1), [0 n], and [1 n]. The algorithm differs between strict/non-strict mode specyfing whether the pattern has to start at the first octect. Strict mode is enabled by default and can be disabled by inserting TS_FSM_HEAD_IGNORE as the first token in the chain. The runtime performance of the algorithm should be around O(n), however while in strict mode the average runtime can be better. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [LIB]: Textsearch infrastructure.Thomas Graf2005-06-231-0/+180
| | | | | | | | | | | | | | | | | | | | The textsearch infrastructure provides text searching facitilies for both linear and non-linear data. Individual search algorithms are implemented in modules and chosen by the user. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [TCP]: Allow choosing TCP congestion control via sockopt.Stephen Hemminger2005-06-232-1/+3
| | | | | | | | | | | | | | | | Allow using setsockopt to set TCP congestion control to use on a per socket basis. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: Separate two usages of netdev_max_backlog.Stephen Hemminger2005-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Separate out the two uses of netdev_max_backlog. One controls the upper bound on packets processed per softirq, the new name for this is netdev_budget; the other controls the limit on packets queued via netif_rx. Increase the max_backlog default to account for faster processors. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: Eliminate netif_rx massive packet drops.Stephen Hemminger2005-06-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Eliminate the throttling behaviour when the netif receive queue fills because it behaves badly when using high speed networks under load. The throttling cause multiple packet drops that cause TCP to go into slow start mode. The same effective patch has been part of BIC TCP and H-TCP as well as part of Web100. The existing code drops 100's of packets when the queue fills; this changes it to individual packet drop-tail. Signed-off-by: Stephen Hemmminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: Remove obsolete netif_rx congestion sensing mechanism.Stephen Hemminger2005-06-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the congestion sensing mechanism from netif_rx, and always return either full or empty. Almost no driver checks the return value from netif_rx, and those that do only use it for debug messages. The original design of netif_rx was to do flow control based on the receive queue, but NAPI has supplanted this and no driver uses the feedback. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: Remove obsolete fastroute stats.Stephen Hemminger2005-06-231-5/+0
| | | | | | | | | | | | | | Remove last vestiages of fastroute code that is no longer used. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] make various thing staticAdrian Bunk2005-06-243-8/+0
| | | | | | | | | | | | | | | | Another rollup of patches which give various symbols static scope Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] xip: reduce code duplicationCarsten Otte2005-06-241-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks filemap_xip.c with the goal to reduce code duplication from mm/filemap.c. It applies agains 2.6.12-rc6-mm1. Instead of implementing the aio functions, this one implements the synchronous read/write functions only. For readv and writev, the generic fallback is used. For aio, we rely on the application doing the fallback. Since our "synchronous" function does memcpy immediately anyway, there is no performance difference between using the fallbacks or implementing each operation. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] xip: ext2: execute in placeCarsten Otte2005-06-242-12/+18
| | | | | | | | | | | | | | | | | | These are the ext2 related parts. Ext2 now uses the xip_* file operations along with the get_xip_page aop when mounted with -o xip. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] xip: fs/mm: execute in placeCarsten Otte2005-06-242-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - generic_file* file operations do no longer have a xip/non-xip split - filemap_xip.c implements a new set of fops that require get_xip_page aop to work proper. all new fops are exported GPL-only (don't like to see whatever code use those except GPL modules) - __xip_unmap now uses page_check_address, which is no longer static in rmap.c, and defined in linux/rmap.h - mm/filemap.h is now much more clean, plainly having just Linus' inline funcs moved here from filemap.c - fix includes in filemap_xip to make it build cleanly on i386 Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] xip: bdev: execute in placeCarsten Otte2005-06-241-0/+1
| | | | | | | | | | | | | | | | | | This is the block device related part. The block device operation direct_access now has a struct block_device as first parameter. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] modules: add version and srcversion to sysfsMatt Domsch2005-06-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] v4l: update for SAA7134 cardsMauro Carvalho Chehab2005-06-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for various SAA7134 cards and brings some fixes. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Fabrice Aeschbacher <fabrice.aeschbacher@laposte.net> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de>. Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] v4l: update for tuner cards and some V4L chipsMauro Carvalho Chehab2005-06-244-4/+29
| | | | | | | | | | | | | | | | | | | | Tuner improvements and additions. TEA5767 FM tuner added. Several small fixes. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] v4l: support tuner for Thomson DDT 7611 (ATSC/NTSC)Michael Krufky2005-06-241-0/+2
| | | | | | | | | | | | | | | | | | | | Add support for tuner#60: Thomson DDT 7611 (ATSC/NTSC) Change tuner in card#28 (DViCO FusionHDTV3 Gold-T) from tuner=52 (Tuner Thomson DDT 7610) to tuner=60 (Tuner Thomson DDT 7611) Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] v4l: add support for PixelView Ultra ProManuel Capinha2005-06-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch adds support for the PixelView Ultra Pro video capture card in v4l. - It removes the remote control key definitions from ir-kbd-gpio.c and moves them to ir-common.c so that they can be shared between bt878 and cx88 based cards. - The patch also moves the FUSIONHDTV_3_GOLD_Q card from number 27 to 28 to regain compatibility with the V4L cvs. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4 reboot dirname fixNeilBrown2005-06-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Set the recovery directory via /proc/fs/nfsd/nfs4recoverydir. It may be changed any time, but is used only on startup. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: reboot recoveryNeilBrown2005-06-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | This patch adds the code to create and remove client subdirectories from the recovery directory, as described in the previous patch comment. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: initialize recovery directoryNeilBrown2005-06-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NFSv4 clients are required to know what state they have on the server so that they can reclaim it on server reboot. However, it is possible for pathalogical combinations of server reboots and network partitions to leave a client in a state where it cannot know whether it has lost its state on the server. For this reason, rfc3530 requires that we store some information about clients to stable storage. So we maintain a directory /var/lib/nfs/v4recovery with a subdirectory for each client with active state. We leave open the possibility of including files underneath each such subdirectory with information about the client, but for now the subdirectories are empty. We create a client subdirectory whenever a client makes its first non-reclaim open_confirm. We remove a client subdirectory whenever either a) its lease expires, or b) the grace period ends without it reclaiming anything. When handling reclaims, we allow the reclaim if and only if the client doing the reclaim has a subdirectory. This patch adds just the code to scan the recovery directory on nfsd startup. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: remove cb_parsedNeilBrown2005-06-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The cb_parsed field is only used by probe_callback, to determine whether the callback information has been filled in by setclientid. But there is no way that probe_callback() can be called without that having already happened, so that check is superfluous, as is cb_parsed. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: rename state list fieldsNeilBrown2005-06-241-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial renaming patch: I can never remember, while looking at various lists relating the nfsd4 state structures, which are the "heads" and which are items on other lists, or which structures are actually on the various lists. The following convention helps me: given structures foo and bar, with foo containing the head of a list of bars, use "bars" for the name of the head of the list contained in the struct foo, and use "per_foo" for the entries in the struct bars. Already done for struct nfs4_file; go ahead and do it for the other nfsd4 state structures. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: make needlessly global code staticNeilBrown2005-06-241-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch contains the following possible cleanups: - make needlessly global code static Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: reboot hashNeilBrown2005-06-241-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the purposes of reboot recovery we keep a directory with subdirectories each having a name that is the ascii hex representation of the md5 sum of a client identifier for an active client. This adds the code to calculate that name. We also use it for the purposes of comparing clients, so if someone ever manages to find two client names that are md5 collisions, then we'll return clid_inuse to the second. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: idmap initializationNeilBrown2005-06-241-0/+5
| | | | | | | | | | | | | | | | | | | | Adopt standard kernel style by defining a no-op function instead of putting ifdef's in the code where the function is called. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: clean up state initializationNeilBrown2005-06-241-0/+2
| | | | | | | | | | | | | | | | | | | | Separate out stuff that needs initialization on startup from stuff that only needs initialization on module init from static data. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: rename nfs4_state_initNeilBrown2005-06-241-2/+2
| | | | | | | | | | | | | | | | | | Somewhat gratuitous rename to simplify following patch. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] knfsd: nfsd4: delegation recoveryNeilBrown2005-06-241-0/+1
| | | | | | | | | | | | | | | | | | Allow recovery of delegations after reboot. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud