summaryrefslogtreecommitdiffstats
path: root/include/video/mmp_disp.h
Commit message (Collapse)AuthorAgeFilesLines
* video: mmp: add pitch info in mmp_win structureJing Xiang2013-09-201-0/+5
| | | | | | | | | | | | | | | Add pitch length info of graphics/video layer, pitch is used to represent line length in byte, the usage depends on pix_fmt. If the fmt is YUV, the pitch[0] will be Y length,pitch[1] will be U length, pitch[2] will be V lenth. If the fmt is RGB, the picth[0] will be line lenth, and pitch[1]/pitch[2] will be 0 and not be used. Signed-off-by: Jing Xiang <jxiang@marvell.com> Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Zhou Zhu <zzhu3@marvell.com> Reviewed-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* video: mmp: rb swap setting update for mmp displayGuoqing Li2013-09-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We could set rb swap in two modules: DMA controler input part and dsi interface output part. DMA input part is based on pix_fmt to set rbswap, dsi output interface part will set rbswap based on platform dsi_rbswap configuration. This patch include below change and enhancement: 1) The input format which support rbswap is based on RGB format, eg. RGB565 indicates the source data in memory is that Red is [15~11], Green is [10~5], Blue is [4:0], Red is MSB, Blue is LSB, but for the display dma input default setting(rbswap = 0), it only support Blue is [15~11], Green is [10~5], Red is [4:0], Red is LSB, Blue is MSB, so for this format(RGB565), display controller need to set rbswap = 1 and it can support the MSB/LSB correctly. BGR/YUV format will not set it in mmp display driver. 2) The dsi output part of rbswap is depend on dsi_rbswap which is defined in specific platfrom. For output dsi interface, it has this feature to do rbswap again if it needs specifc byte sequence of RGB byte for DSI panel. eg. If display content is set RGB565 in memory and DMA input part set rbswap in driver to support Red as MSB , Blue LSB, but dsi panel only support Red as LSB, Blue as MSB, then it can use this feature. If there is no this requirement of panel, this dsi output part is not needed. Signed-off-by: Guoqing Li <ligq@marvell.com> Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Zhou Zhu <zzhu3@marvell.com> Reviewed-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* video: mmp display subsystemZhou Zhu2013-02-211-0/+352
Add mmp display subsystem to support Marvell MMP display controllers. This subsystem contains 4 parts: --fb folder --core.c --hw folder --panel folder 1. fb folder contains implementation of fb. fb get path and overlay from common interface and operates on these structures. 2. core.c provides common interface for a hardware abstraction. Major parts of this interface are: a) Path: path is a output device connected to a panel or HDMI TV. Main operations of the path is set/get timing/output color. fb operates output device through path structure. b) Ovly: Ovly is a buffer shown on the path. Ovly describes frame buffer and its source/destination size, offset, input color, buffer address, z-order, and so on. Each fb device maps to one overlay. 3. hw folder contains implementation of hardware operations defined by core.c. It registers paths for fb use. 4. panel folder contains implementation of panels. It's connected to path. Panel drivers would also regiester panels and linked to path when probe. Signed-off-by: Zhou Zhu <zzhu3@marvell.com> Signed-off-by: Lisa Du <cldu@marvell.com> Cc: Guoqing Li <ligq@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud