summaryrefslogtreecommitdiffstats
path: root/include/sound/soc-dai.h
Commit message (Collapse)AuthorAgeFilesLines
*-. Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ad193x', ↵Mark Brown2014-12-081-2/+2
|\ \ | | | | | | | | | 'asoc/topic/adau1373' and 'asoc/topic/adau17x1' into asoc-next
| * | ASoC: Rename snd_soc_dai_driver struct ac97_control field to bus_controlLars-Peter Clausen2014-11-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting the ac97_control field on a CPU DAI tells the ASoC core that this DAI in addition to audio data also transports control data to the CODEC. This causes the core to suspend the DAI after the CODEC and resume it before the CODEC so communication to the CODEC is still possible. This is not necessarily something that is specific to AC'97 and can be used by other buses with the same requirement. This patch renames the flag from ac97_control to bus_control to make this explicit. While we are at it also change the type from int to bool. The following semantich patch was used for automatic conversion of the drivers: // <smpl> @@ identifier drv; @@ struct snd_soc_dai_driver drv = { - .ac97_control + .bus_control = - 1 + true }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | ASoC: ac97: Drop support for setting platform data via the CPU DAILars-Peter Clausen2014-11-181-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | This has no users since commit f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support") which was almost 5 years ago. Given that this runs after CODEC probe functions have been run it also doesn't seem to be that useful. So drop it altogether to make the code simpler. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: Remove card field from snd_soc_dai structLars-Peter Clausen2014-11-041-2/+0
| | | | | | | | | | | | | | | | | | The card field of the snd_soc_dai field is very rarely used. We can use dai->component->card instead and remove the card field from the snd_soc_dai struct. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: Remove platform field from snd_soc_daiLars-Peter Clausen2014-11-031-1/+0
|/ | | | | | | | | | | Typically a DAI does not need direct access to the platform. Currently the only user of this field is in a platform driver where we have a more direct way of getting a pointer to the platform. This patch updates the driver to use the more direct way and then removes the platform field from the snd_soc_dai struct. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: core: Add initial support for DAI multicodecBenoit Cousson2014-07-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | DAI link assumes a one to one mapping between CPU DAI and CODEC. In some cases, the same CPU DAI can be connected to several codecs. This is the case for example, if you connect two mono codecs to the same I2S link in order to have a stereo card. The current ASoC implementation does not allow such setup. Add support for DAI links composed of a single CPU DAI and multiple CODECs. Sound cards have to pass the CODECs array in the corresponding DAI link through a new 'snd_soc_dai_link_component' struct. Each CODEC in this array is described in the same manner single CODEC DAIs are (either DT/OF node or codec_name). Multi-codec links are not supported in the case of CODEC to CODEC links. Just print a warning if it happens. Based on an original code done by Misael. Signed-off-by: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* ASoC: dapm: Remove DAI DAPM contextLars-Peter Clausen2014-06-211-1/+0
| | | | | | | | | | The DAI DAPM context was added in commit be09ad90 ("ASoC: core: Add platform DAI widget mapping") and the only user was removed again in commit ae10e7e8f ("ASoC: core: Only add platform DAI widgets once."). Now that we have a per component DAPM context it is unlikely that we'll need the DAI DAPM context again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* ASoC: Remove runtime field from DAILars-Peter Clausen2014-05-121-1/+0
| | | | | | | | | | This was initially removed in commit 6423c1875 ("ASoC: Remove runtime field from DAI"), but was, presumably by accident, brought back in commit f0fba2ad1 ("ASoC: multi-component - ASoC Multi-Component Support"). But has never been initialized to anything but NULL ever since. This commit removes it again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* ASoC: Remove card's DAI listLars-Peter Clausen2014-05-071-1/+0
| | | | | | | | | Commit f0fba2ad1 ("ASoC: multi-component - ASoC Multi-Component Support") added a per card list that keeps track of all the DAIs that have been registered with the card, but the list has never been used. This patch removes it again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask.Xiubo Li2014-03-251-1/+1
| | | | | | | The 'of_' is not appropriate here for there hasn't any DT parsing. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
*-. Merge remote-tracking branches 'asoc/topic/ml26124', 'asoc/topic/of', ↵Mark Brown2014-03-121-0/+2
|\ \ | | | | | | | | | 'asoc/topic/omap', 'asoc/topic/pxa' and 'asoc/topic/rcar' into asoc-next
| | * ASoC: core: add TDM slot parsing from DT supportsXiubo Li2014-02-231-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some CPU/CODEC DAI devices the TDM slot infomation maybe needed. This patch adds the slot parsing from DT supports. TDM slot properties: dai-tdm-slot-num : Number of slots in use. dai-tdm-slot-width : Width in bits for each slot. For instance: dai-tdm-slot-num = <2>; dai-tdm-slot-width = <8>; And for each spcified driver, there could be one .of_xlate_tdm_slot_mask() to specify a explicit mapping of the channels and the slots. If it's absent the default snd_soc_of_xlate_tdm_slot_mask() will be used to generating the tx and rx masks. For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit for an active slot as default, and the default active bits are at the LSB of the masks. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* | ASoC: Add component pointer to the DAI structLars-Peter Clausen2014-03-061-0/+1
|/ | | | | | | | Keep track of which component registered a DAI. We'll need this as componentization progresses. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* Merge remote-tracking branch 'asoc/topic/dapm' into for-tiwaiMark Brown2014-01-161-0/+2
|\
| * ASoC: utils: Add internal call to determine if DAI is dummy.Liam Girdwood2014-01-081-0/+2
| | | | | | | | | | | | | | | | | | Provide a quick way to tell if a DAI is a dummy DAI or a regular DAI. This is for internal DAPM usage only and is used to determine whether to insert a DAI link connection into the DAPM graph. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* | ASoC: soc-pcm: add symmetry for channels and sample bitsNicolin Chen2013-11-241-0/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SoCs can only work in mono or stereo mode at one time. So if we let them capture a mono stream while playing a stereo stream, there might be a problem occur to one of these two streams: double paced or slowed down. In soc-pcm.c, we have soc_pcm_apply_symmetry() to apply the rate symmetry. But we don't have one for channels. Likewise, we can treat symmetric_rate as a solution for those SoCs or CODECs which can not handle asymmetrical LRCLK. But it's also impossible for them to handle asymmetrical BCLK. And accodring to BCLK = LRCLK * channel number * slot size(fixed or sample bits), sample bits might also be a problem if they are not using a fixed slot size. Thus, this patch applys symmetry for channels and sample bits. Meanwhile, there might be a race between two substreams if starting simultaneously. Previously, we only added warning to compalin but still using conservative way to let it carry on. However, this patch rejects the second stream with any unmatched parameter to make sure the first existing stream won't be broken. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* Merge remote-tracking branch 'asoc/topic/mxs' into asoc-nextMark Brown2013-10-241-0/+7
|\
| * ASoC: snd_soc_dai_ops trigger function descriptionMarkus Pargmann2013-10-141-0/+7
| | | | | | | | | | | | | | | | Add a comment to the trigger function in snd_soc_dai_ops struct about possible command sequences. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* | Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown2013-10-241-0/+7
|\ \
| * | ASoC: dai: Provide interface for setting DMA data at probe timeMark Brown2013-10-201-0/+7
| |/ | | | | | | | | | | | | | | Allow DMA data to be set at probe time for devices that can do that, avoiding the need to do it every time we start a stream and supporting non-DT dmaengine users using the helpers. Signed-off-by: Mark Brown <broonie@linaro.org>
* | ASoC: core: Add API for configuration of DAI BCLK ratioLiam Girdwood2013-09-171-0/+3
|/ | | | | | | | | | | | Some codec drivers when running in slave mode require that BCLK to sample rate ratio is explicitly set by the machine driver as it may not be exactly rate * frame size. Extend the DAI API by adding :- int snd_soc_dai_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio); Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* ASoC: snd_soc_[un]register_dai[s]() become non global functionKuninori Morimoto2013-03-261-8/+0
| | | | | | | | | All drivers are using snd_soc_register_component() instead of snd_soc_register_dai[s]() snd_soc_[un]register_dai[s]() are no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge remote-tracking branch 'asoc/topic/of' into asoc-nextMark Brown2013-02-111-1/+1
|\
| * ASoC: SND_SOC_DAIFMT_GATED become 0 as default settingsKuninori Morimoto2013-01-301-1/+1
| | | | | | | | | | | | | | | | | | Current soc-dai.h defines SND_SOC_DAIFMT_GATED as (2 << 4), but gated clock should be default settings (= 0). This patch fixup SND_SOC_DAIFMT_GATED as (0 << 4). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown2013-02-111-1/+1
|\ \
| * | ASoC: SND_SOC_DAIFMT_NB_NF become 0 as default settingsKuninori Morimoto2013-01-161-1/+1
| |/ | | | | | | | | | | | | | | | | | | Current soc-dai.h defines SND_SOC_DAIFMT_NB_NF as (1 << 8), but normal bit clock / normal frame should be default settings (= 0). This patch fixup SND_SOC_DAIFMT_NB_NF as (0 << 8). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: core: Allow digital mute for captureMark Brown2013-02-081-1/+3
|/ | | | | | | | | | | | | | | | | | | | | | Help avoid noise from the power up of the capture path propagating through into the start of the recording (especially noise caused by the ramp of microphone biases) by keeping the capture muted until after we've finished powering things up with DAPM in the same manner we do for playback. This allows us to take advantage of soft mute support in the hardware more effectively and is more consistent. The core code using the existing digital mute operation is updated to take advantage of this. Some additional cases in the soc-pcm code and suspend will need separate handling but these are less practically relevant than the main runtime stream start/stop case. Rather than refactor the digital mute function in every single driver a new operation is added for drivers taking advantage of this functionality, the old operation should be phased out over time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by Vinod Koul <vinod.koul@intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
* ASoC: Prevent pop_wait overwriteMisael Lopez Cruz2012-12-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pop_wait is used to determine if a deferred playback close needs to be cancelled when the a PCM is open or if after the power-down delay expires it needs to run. pop_wait is associated with the CODEC DAI, so the CODEC DAI must be unique. This holds true for most CODECs, except for the dummy CODEC and its DAI. In DAI links with non-unique dummy CODECs (e.g. front-ends), pop_wait can be overwritten by another DAI link using also a dummy CODEC. Failure to cancel a deferred close can cause mute due to the DAPM STOP event sent in the deferred work. One scenario where pop_wait is overwritten and causing mute is below (where hw:0,0 and hw:0,1 are two front-ends with default pmdown_time = 5 secs): aplay /dev/urandom -D hw:0,0 -c 2 -r 48000 -f S16_LE -d 1 sleep 1 aplay /dev/urandom -D hw:0,1 -c 2 -r 48000 -f S16_LE -d 3 & aplay /dev/urandom -D hw:0,0 -c 2 -r 48000 -f S16_LE Since CODECs may not be unique, pop_wait is moved to the PCM runtime structure. Creating separate dummy CODECs for each DAI link can also solve the problem, but at this point it's only pop_wait variable in the CODEC DAI that has negative effects by not being unique. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: add definations for compressed operationsVinod Koul2012-08-201-0/+3
| | | | | | | | | | | | | | | | Here we update the asoc structures to add compress stream definations First the struct snd_soc_dai_driver adds a new member to indicate if the dai is compressed or pcm. Next we add a new structre the struct snd_soc_compr_ops in the struct snd_soc_dai_link. This is to be used for machine driver to perform any opertaions required for setting up compressed audio streams next is the compressed data operations, they are added using struct snd_compr_ops in the struct snd_soc_platform_driver. Signed-off-by: Namarta Kohli <namartax.kohli@intel.com> Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: core: Allow DAIs to specify a base addressMark Brown2012-05-021-0/+1
| | | | | | | | | | | Devices with many DAIs are becoming more and more common, and generally the more modern devices have consistent register layouts between DAIs. Rather than have drivers open code lookups based on the DAI ID or cause uglification in UI by having register addresses for IDs provide a base address field they can use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* ASoC: dpcm: Add bespoke trigger()Liam Girdwood2012-04-261-0/+2
| | | | | | | | | | | | | | | | Some on SoC DSP HW is very tightly coupled with DMA and DAI drivers. It's necessary to allow some flexability wrt to PCM operations here so that we can define a bespoke DPCM trigger() PCM operation for such HW. A bespoke DPCM trigger() allows exact ordering and timing of component triggering by allowing a component driver to manage the final enable and disable configurations without adding extra complexity to other component drivers. e.g. The McPDM DAI and ABE are tightly coupled on OMAP4 so we have a bespoke trigger to manage the trigger to improve performance and reduce complexity when triggering new McPDM BEs. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: core: Add platform DAI widget mappingLiam Girdwood2012-04-011-0/+1
| | | | | | | Add platform driver support for CPU DAI DAPM widgets. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: core: Split the union for CODEC/platform in the DAIMark Brown2012-03-041-4/+3
| | | | | | | | | | | | There's now core code which falls back to global CODEC operations for DAI calls that needs to be able to tell if it's dealing with a CPU or CODEC DAI and given the small number of DAIs in a typical system and overall memory usage pattern saving a pointer per DAI is really not worth the effort. Reported-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* ASoC: dapm: Implement and instantiate DAI widgetsMark Brown2012-02-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to allow us to do smarter things with DAI links create DAPM widgets which directly represent the DAIs in the DAPM graph. These are automatically created from the DAIs as we probe the card with references held in both directions between the widget and the DAI. The widgets are not made available for direct instantiation by drivers, they are created automatically from the DAIs. Drivers should be updated to create stream routes using DAPM maps rather than by annotating AIF and DAC widgets with streams. In order to ease transition to this model from existing drivers we automatically create DAPM routes between the DAI widgets and the existing stream widgets which are started and stopped by the DAI widgets, though the old stream handling mechanism is still in place. This also has the nice effect of removing non-DAPM devices as any device with a DAI acquires a widget automatically which will allow future simplifications to the core DAPM logic. The intention is that in future the AIF and DAI widgets will gain the ability to interact such that we are able to manage activity on individual channels independantly rather than powering up and down the entire AIF as we do currently. Currently we only generate these for CODECs, mostly as I have no systems with non-CODEC DAPM to integrate with. It should be a simple matter of programming to add the additional hookup for these. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* ASoC: Allow DAI formats to be specified in the dai_linkMark Brown2011-09-281-17/+17
| | | | | | | | | | | | | | | | For almost all machines the DAI format is a constant, always set to the same thing. This means that not only should we normally set it on init rather than in hw_params() (where it has been for historical reasons) we should also allow users to configure this by setting a variable in the dai_link structure. The combination of these two will make many machine drivers even more data driven. Implement a new dai_fmt field in the dai_link doing just that. Since 0 is a valid value for many format flags and we need to be able to tell if the field is actually set also add one to all the values used to configure formats. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: soc-core: symmetry checking for each DAIs separatelyDong Aisheng2011-09-211-0/+3
| | | | | | | | | | | | | | | The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: core - Allow components to probe/remove in sequence.Liam Girdwood2011-06-071-0/+4
| | | | | | | | | | | Some ASoC components depend on other ASoC components to provide clocks and power resources in order to probe() and vice versa for remove(). Allow components to be ordered so that components can be probed() and removed() in sequences that conform to their dependencies. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Make the DAI ops constant in the DAI structureMark Brown2010-12-031-1/+1
| | | | | | | | Neither drivers nor the core should be fiddling with the actual ops structure at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Remove cyclic dependency between soc.h and soc-dapm.h/soc-dai.hJarkko Nikula2010-11-221-2/+0
| | | | | | | | | | | There is no need anymore to include soc.h in soc-dapm.h and soc-dai.h as drivers are converted to include only soc.h. Thanks to Lars-Peter Clausen <lars@metafoo.de> for pointing out the issue. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood2010-08-121-35/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack2010-03-191-1/+17
| | | | | | | | | | | | | | | | | | This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: core: Add delay operation to snd_soc_dai_opsPeter Ujfalusi2010-03-031-0/+6
| | | | | | | | | | | | | The delay callback can be used by the core to query the delay on the dai caused by FIFO or delay in the platform side. In case if both CPU and CODEC dai has FIFO the delay reported by each will be added to form the full delay on the chain. If none of the dai has FIFO, than the delay will be kept as zero. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Remove runtime field from DAIjassi brar2010-02-221-1/+0
| | | | | | | | | In order for having snd_soc_dais shared among two or more dai_links, remove the relatively global runtime field from the struct snd_soc_dai Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: fix compile breakage - add a missing header includeGuennadi Liakhovetski2010-01-191-0/+2
| | | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Add PDM DAI format definitionLopez Cruz, Misael2009-09-281-0/+1
| | | | | | | Add DAI format definition for PDM interfaces. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Provide API for reordering channelsBarry Song2009-09-131-0/+7
| | | | | | | | | | | The patch adds an interface to set the relationship between audio channel number and slot number. The interface should be really useful because audio channel n doesn't always use slot n in all platforms. And for some devices, the relationship even can change with sound mode switch in 2.1,3.1,4.1,5.1,6.1,7.1 etc. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Add source argument to PLL configurationMark Brown2009-09-051-3/+3
| | | | | | | | | | More and more devices feature PLLs and FLLs with the ability to select between multiple input clocks. In order to better support these devices a new argument, source, has been added to the set_pll() configuration API. Using set_clkdiv() is often difficult due to the need to stop the PLL/FLL before any reconfiguration can be done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge commit 'a5479e389e989acfeca9c32eeb0083d086202280' into for-2.6.32Mark Brown2009-08-111-2/+3
|\
| * ASoC: change set_tdm_slot api to allow slot_width override.Daniel Ribeiro2009-08-061-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend set_tdm_slot to allow the user to arbitrarily set the frame width and active TX/RX slots. Updates magician.c and wm9081.c for the new set_tdm_slot(). wm9081.c still doesn't handle the slot_width override. While being there, correct an incorrect use of SlotsPerFrm(7) use in bitmask on pxa-ssp.c (SSCR0_SlotsPerFrm(x) is (((x) - 1) << 24)) ). (this series is meant for Mark's for-2.6.32 branch) Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Define more formats for the AC97 CODECsMark Brown2009-08-091-1/+7
|/ | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
OpenPOWER on IntegriCloud