summaryrefslogtreecommitdiffstats
path: root/include/net/flow.h
Commit message (Collapse)AuthorAgeFilesLines
* ipv4: Kill FLOWI_FLAG_RT_NOCACHE and associated code.David S. Miller2012-07-201-1/+0
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: Kill FLOWI_FLAG_PRECOW_METRICS.David S. Miller2012-07-101-3/+2
| | | | | | | | No longer needed. TCP writes metrics, but now in it's own special cache that does not dirty the route metrics. Therefore there is no longer any reason to pre-cow metrics in this way. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: tcp: dont cache output dst for syncookiesEric Dumazet2012-06-221-0/+1
| | | | | | | | | | Don't cache output dst for syncookies, as this adds pressure on IP route cache and rcu subsystem for no gain. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: reset flowi parameters on route connectJulian Anastasov2012-02-041-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eric Dumazet found that commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is in output route lookups.) that comes in 3.0 added a regression. The problem appears to be that resulting flowi4_oif is used incorrectly as input parameter to some routing lookups. The result is that when connecting to local port without listener if the IP address that is used is not on a loopback interface we incorrectly assign RTN_UNICAST to the output route because no route is matched by oif=lo. The RST packet can not be sent immediately by tcp_v4_send_reset because it expects RTN_LOCAL. So, change ip_route_connect and ip_route_newports to update the flowi4 fields that are input parameters because we do not want unnecessary binding to oif. To make it clear what are the input parameters that can be modified during lookup and to show which fields of floiw4 are reused add a new function to update the flowi4 structure: flowi4_update_output. Thanks to Yurij M. Plotnikov for providing a bug report including a program to reproduce the problem. Thanks to Eric Dumazet for tracking the problem down to tcp_v4_send_reset and providing initial fix. Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix some sparse errorsEric Dumazet2012-01-171-1/+1
| | | | | | | | | make C=2 CF="-D__CHECK_ENDIAN__" M=net And fix flowi4_init_output() prototype for sport Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-12-231-0/+1
|\ | | | | | | | | | | | | | | | | | | Conflicts: net/bluetooth/l2cap_core.c Just two overlapping changes, one added an initialization of a local variable, and another change added a new local variable. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Add a flow_cache_flush_deferred functionSteffen Klassert2011-12-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | flow_cach_flush() might sleep but can be called from atomic context via the xfrm garbage collector. So add a flow_cache_flush_deferred() function and use this if the xfrm garbage colector is invoked from within the packet path. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv4: use a 64bit load/store in output pathEric Dumazet2011-12-011-1/+4
|/ | | | | | | | | | | | | gcc compiler is smart enough to use a single load/store if we memcpy(dptr, sptr, 8) on x86_64, regardless of CONFIG_CC_OPTIMIZE_FOR_SIZE In IP header, daddr immediately follows saddr, this wont change in the future. We only need to make sure our flowi4 (saddr,daddr) fields wont break the rule. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Handle different key sizes between address families in flow cachedpward2011-09-161-0/+19
| | | | | | | | With the conversion of struct flowi to a union of AF-specific structs, some operations on the flow cache need to account for the exact size of the key. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Align AF-specific flowi structs to longDavid Ward2011-09-161-3/+3
| | | | | | | | AF-specific flowi structs are now passed to flow_key_compare, which must also be aligned to a long. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
* atomic: use <linux/atomic.h>Arun Sharma2011-07-261-1/+1
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* net: Order ports in same order as addresses in flow objects.David S. Miller2011-03-311-3/+3
| | | | | | For consistency. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add helper flowi4_init_output().David S. Miller2011-03-311-0/+21
| | | | | | | | | | | On-stack initialization via assignment of flow structures are expensive because GCC emits a memset() to clear the entire structure out no matter what. Add a helper for ipv4 output flow key setup which we can use to avoid the memset. Signed-off-by: David S. Miller <davem@davemloft.net>
* decnet: Convert to use flowidn where applicable.David S. Miller2011-03-121-4/+8
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Put fl6_* macros to struct flowi6 and use them again.David S. Miller2011-03-121-10/+7
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Put fl4_* macros to struct flowi4 and use them again.David S. Miller2011-03-121-11/+7
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add flowi6_* member helper macros.David S. Miller2011-03-121-0/+8
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Pass ipv4 flow objects into fib_lookup() paths.David S. Miller2011-03-121-0/+8
| | | | | | | | To start doing these conversions, we need to add some temporary flow4_* macros which will eventually go away when all the protocol code paths are changed to work on AF specific flowi objects. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add flowiX_to_flowi() shorthands.David S. Miller2011-03-121-0/+15
| | | | | | | This is just a shorthand which will help in passing around AF specific flow structures as generic ones. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Break struct flowi out into AF specific instances.David S. Miller2011-03-121-57/+57
| | | | | | | | | | | Now we have struct flowi4, flowi6, and flowidn for each address family. And struct flowi is just a union of them all. It might have been troublesome to convert flow_cache_uli_match() but as it turns out this function is completely unused and therefore can be simply removed. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Make flowi ports AF dependent.David S. Miller2011-03-121-7/+14
| | | | | | | | | | | | Create two sets of port member accessors, one set prefixed by fl4_* and the other prefixed by fl6_* This will let us to create AF optimal flow instances. It will work because every context in which we access the ports, we have to be fully aware of which AF the flowi is anyways. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Create union flowi_uliDavid S. Miller2011-03-121-23/+25
| | | | | | This will be used when we have seperate flowi types. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Create struct flowi_commonDavid S. Miller2011-03-121-9/+21
| | | | | | | Pull out the AF independent members of struct flowi into a new struct flowi_common Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Put flowi_* prefix on AF independent members of struct flowiDavid S. Miller2011-03-121-11/+11
| | | | | | | | | | I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unnecessary padding in struct flowiDavid S. Miller2011-03-121-10/+10
| | | | | | | Move tos, scope, proto, and flags to the beginning of the structure. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add FLOWI_FLAG_CAN_SLEEP.David S. Miller2011-03-011-0/+1
| | | | | | And set is in contexts where the route resolution can sleep. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Make flow cache paths use a const struct flowi.David S. Miller2011-02-221-2/+2
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Mark flowi arg to flow_cache_uli_match() const.David S. Miller2011-02-221-1/+2
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Pre-COW metrics for TCP.David S. Miller2011-01-271-1/+2
| | | | | | | | | | | | TCP is going to record metrics for the connection, so pre-COW the route metrics at route cache entry creation time. This avoids several atomic operations that have to occur if we COW the metrics after the entry reaches global visibility. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-12-261-1/+0
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/fib_frontend.c
| * Revert "ipv4: Allow configuring subnets as local addresses"David S. Miller2010-12-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 4465b469008bc03b98a1b8df4e9ae501b6c69d4b. Conflicts: net/ipv4/fib_frontend.c As reported by Ben Greear, this causes regressions: > Change 4465b469008bc03b98a1b8df4e9ae501b6c69d4b caused rules > to stop matching the input device properly because the > FLOWI_FLAG_MATCH_ANY_IIF is always defined in ip_dev_find(). > > This breaks rules such as: > > ip rule add pref 512 lookup local > ip rule del pref 0 lookup local > ip link set eth2 up > ip -4 addr add 172.16.0.102/24 broadcast 172.16.0.255 dev eth2 > ip rule add to 172.16.0.102 iif eth2 lookup local pref 10 > ip rule add iif eth2 lookup 10001 pref 20 > ip route add 172.16.0.0/24 dev eth2 table 10001 > ip route add unreachable 0/0 table 10001 > > If you had a second interface 'eth0' that was on a different > subnet, pinging a system on that interface would fail: > > [root@ct503-60 ~]# ping 192.168.100.1 > connect: Invalid argument Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xfrm: use gre key as flow upper protocol infoTimo Teräs2010-11-151-0/+2
|/ | | | | | | | | | The GRE Key field is intended to be used for identifying an individual traffic flow within a tunnel. It is useful to be able to have XFRM policy selector matches to have different policies for different GRE tunnels. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Allow configuring subnets as local addressesTom Herbert2010-09-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows a host to be configured to respond to any address in a specified range as if it were local, without actually needing to configure the address on an interface. This is done through routing table configuration. For instance, to configure a host to respond to any address in 10.1/16 received on eth0 as a local address we can do: ip rule add from all iif eth0 lookup 200 ip route add local 10.1/16 dev lo proto kernel scope host src 127.0.0.1 table 200 This host is now reachable by any 10.1/16 address (route lookup on input for packets received on eth0 can find the route). On output, the rule will not be matched so that this host can still send packets to 10.1/16 (not sent on loopback). Presumably, external routing can be configured to make sense out of this. To make this work, we needed to modify the logic in finding the interface which is assigned a given source address for output (dev_ip_find). We perform a normal fib_lookup instead of just a lookup on the local table, and in the lookup we ignore the input interface for matching. This patch is useful to implement IP-anycast for subnets of virtual addresses. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* flow: virtualize flow cache entry methodsTimo Teräs2010-04-071-4/+19
| | | | | | | | | | | | | | | | | | This allows to validate the cached object before returning it. It also allows to destruct object properly, if the last reference was held in flow cache. This is also a prepartion for caching bundles in the flow cache. In return for virtualizing the methods, we save on: - not having to regenerate the whole flow cache on policy removal: each flow matching a killed policy gets refreshed as the getter function notices it smartly. - we do not have to call flow_cache_flush from policy gc, since the flow cache now properly deletes the object if it had any references Signed-off-by: Timo Teras <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* netns xfrm: lookup in netnsAlexey Dobriyan2008-11-251-4/+5
| | | | | | | | | | Pass netns to xfrm_lookup()/__xfrm_lookup(). For that pass netns to flow_cache_lookup() and resolver callback. Take it from socket or netdevice. Stub DECnet to init_net. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Loosen source address check on IPv4 outputJulian Anastasov2008-10-011-0/+2
| | | | | | | | | | | | | | ip_route_output() contains a check to make sure that no flows with non-local source IP addresses are routed. This obviously makes using such addresses impossible. This patch introduces a flowi flag which makes omitting this check possible. The new flag provides a way of handling transparent and non-transparent connections differently. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: remove unused field in struct flowi (include/net/flow.h).Rami Rosen2008-08-051-1/+0
| | | | | | | | | | | This patch removes an unused field (flags) from struct flowi; it seems that this "flags" field was used once in the past for multipath routing with FLOWI_FLAG_MULTIPATHOLDROUTE flag (which does no longer exist); however, the "flags" field of struct flowi is not used anymore. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4]: Remove unused multipath cached routing defintion in net/flow.hRami Rosen2008-01-281-1/+0
| | | | | Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] MIP6: Kill unnecessary ifdefs.Masahide NAKAMURA2007-07-101-4/+0
| | | | | | | | | | | Kill unnecessary CONFIG_IPV6_MIP6. o It is redundant for RAW socket to keep MH out with the config then it can handle any protocol. o Clean-up at AH. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: Restrict upper layer information by bundle.Masahide NAKAMURA2007-04-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | On MIPv6 usage, XFRM sub policy is enabled. When main (IPsec) and sub (MIPv6) policy selectors have the same address set but different upper layer information (i.e. protocol number and its ports or type/code), multiple bundle should be created. However, currently we have issue to use the same bundle created for the first time with all flows covered by the case. It is useful for the bundle to have the upper layer information to be restructured correctly if it does not match with the flow. 1. Bundle was created by two policies Selector from another policy is added to xfrm_dst. If the flow does not match the selector, it goes to slow path to restructure new bundle by single policy. 2. Bundle was created by one policy Flow cache is added to xfrm_dst as originated one. If the flow does not match the cache, it goes to slow path to try searching another policy. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Rethink mark field in struct flowiThomas Graf2006-12-021-6/+1
| | | | | | | | | | | | | | | | | | Now that all protocols have been made aware of the mark field it can be moved out of the union thus simplyfing its usage. The config options in the IPv4/IPv6/DECnet subsystems to enable respectively disable mark based routing only obfuscate the code with ifdefs, the cost for the additional comparison in the flow key is insignificant, and most distributions have all these options enabled by default anyway. Therefore it makes sense to remove the config options and enable mark based routing by default. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: flowlabels are net-endianAl Viro2006-12-021-1/+1
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Reduce sizeof(struct flowi) by 20 bytes.Eric Dumazet2006-10-211-3/+0
| | | | | | | | | | | As suggested by David, just kill off some unused fields in dnports to reduce sizef(struct flowi). If they come back, they should be moved to nl_u.dn_u in order not to enlarge again struct flowi [ Modified to really delete this stuff instead of using #if 0. -DaveM ] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPsec: propagate security module errors up from flow_cache_lookupJames Morris2006-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a security module is loaded (in this case, SELinux), the security_xfrm_policy_lookup() hook can return an access denied permission (or other error). We were not handling that correctly, and in fact inverting the return logic and propagating a false "ok" back up to xfrm_lookup(), which then allowed packets to pass as if they were not associated with an xfrm policy. The way I was seeing the problem was when connecting via IPsec to a confined service on an SELinux box (vsftpd), which did not have the appropriate SELinux policy permissions to send packets via IPsec. The first SYNACK would be blocked, because of an uncached lookup via flow_cache_lookup(), which would fail to resolve an xfrm policy because the SELinux policy is checked at that point via the resolver. However, retransmitted SYNACKs would then find a cached flow entry when calling into flow_cache_lookup() with a null xfrm policy, which is interpreted by xfrm_lookup() as the packet not having any associated policy and similarly to the first case, allowing it to pass without transformation. The solution presented here is to first ensure that errno values are correctly propagated all the way back up through the various call chains from security_xfrm_policy_lookup(), and handled correctly. Then, flow_cache_lookup() is modified, so that if the policy resolver fails (typically a permission denied via the security module), the flow cache entry is killed rather than having a null policy assigned (which indicates that the packet can pass freely). This also forces any future lookups for the same flow to consult the security module (e.g. SELinux) for current security policy (rather than, say, caching the error on the flow cache entry). Signed-off-by: James Morris <jmorris@namei.org>
* [XFRM]: fl_ipsec_spi is net-endianAl Viro2006-09-281-1/+1
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: ip ports in struct flowi are net-endianAl Viro2006-09-281-2/+2
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4]: annotate ipv4 addresses in struct rtable and struct flowiAl Viro2006-09-281-2/+2
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] ROUTE: Routing by FWMARK.YOSHIFUJI Hideaki2006-09-221-0/+2
| | | | | | Based on patch by Jean Lorchat <lorchat@sfc.wide.ad.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [IPV6] MIP6: Add Mobility header definition.Masahide NAKAMURA2006-09-221-0/+9
| | | | | | | | | | | Add Mobility header definition for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Antti Tuominen <anttit@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MLSXFRM]: Flow based matching of xfrm policy and stateVenkat Yekkirala2006-09-221-2/+2
| | | | | | | | | This implements a seemless mechanism for xfrm policy selection and state matching based on the flow sid. This also includes the necessary SELinux enforcement pieces. Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud