summaryrefslogtreecommitdiffstats
path: root/include/linux
Commit message (Collapse)AuthorAgeFilesLines
* NLM: Rewrite IPv4 privileged requester's checkChuck Lever2009-01-061-2/+5
| | | | | | | | | | | | Clean up. For consistency, rewrite the IPv4 check to match the same style as the new IPv6 check. Note that ipv4_is_loopback() is somewhat broader in its interpretation of what is a loopback address than simply "127.0.0.1". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: nlm_privileged_requester() doesn't recognize mapped loopback addressChuck Lever2009-01-061-2/+8
| | | | | | | | | | | | | | | | | | | Commit b85e4676 added the nlm_privileged_requester() helper to check whether an RPC request was sent from a local privileged caller. It recognizes IPv4 privileged callers (from "127.0.0.1"), and IPv6 privileged callers (from "::1"). However, IPV6_ADDR_LOOPBACK is not set for the mapped IPv4 loopback address (::ffff:7f00:0001), so the test breaks when the kernel's RPC service is IPv6-enabled but user space is calling via the IPv4 loopback address. This is actually the most common case for IPv6- enabled RPC services on Linux. Rewrite the IPv6 check to handle the mapped IPv4 loopback address as well as a normal IPv6 loopback address. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Move nsm_addr() to fs/lockd/mon.cChuck Lever2009-01-061-10/+0
| | | | | | | | Clean up: nsm_addr_in() is no longer used, and nsm_addr() is used only in fs/lockd/mon.c, so move it there. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Remove include/linux/lockd/sm_inter.hChuck Lever2009-01-063-16/+2
| | | | | | | | Clean up: The include/linux/lockd/sm_inter.h header is nearly empty now. Remove it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: Remove "create" argument from nsm_find()Chuck Lever2009-01-061-3/+3
| | | | | | | | | | | | Clean up: nsm_find() now has only one caller, and that caller unconditionally sets the @create argument. Thus the @create argument is no longer needed. Since nsm_find() now has a more specific purpose, pick a more appropriate name for it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Add nsm_lookup() functionChuck Lever2009-01-061-0/+1
| | | | | | | | | | | | Introduce a new API to fs/lockd/mon.c that allows nlm_host_rebooted() to lookup up nsm_handles via the contents of an nlm_reboot struct. The new function is equivalent to calling nsm_find() with @create set to zero, but it takes a struct nlm_reboot instead of separate arguments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: Decode "priv" argument of NLMPROC_SM_NOTIFY as an opaqueChuck Lever2009-01-061-4/+4
| | | | | | | | | | | | | | | | | | | | | The NLM XDR decoders for the NLMPROC_SM_NOTIFY procedure should treat their "priv" argument truly as an opaque, as defined by the protocol, and let the upper layers figure out what is in it. This will make it easier to modify the contents and interpretation of the "priv" argument, and keep knowledge about what's in "priv" local to fs/lockd/mon.c. For now, the NLM and NSM implementations should behave exactly as they did before. The formation of the address of the rebooted host in nlm_host_rebooted() may look a little strange, but it is the inverse of how nsm_init_private() forms the private cookie. Plus, it's going away soon anyway. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: Change nlm_host_rebooted() to take a single nlm_reboot argumentChuck Lever2009-01-061-2/+1
| | | | | | | | | | | | | | Pass the nlm_reboot data structure directly from the NLMPROC_SM_NOTIFY XDR decoders to nlm_host_rebooted(). This eliminates some packing and unpacking of the NLMPROC_SM_NOTIFY results, and prepares for passing these results, including the "priv" cookie, directly to a lookup routine in fs/lockd/mon.c. This patch changes code organization but should not cause any behavioral change. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Generate NSMPROC_MON's "priv" argument when nsm_handle is createdChuck Lever2009-01-063-1/+7
| | | | | | | | | | | | | | | Introduce a new data type, used by both the in-kernel NLM and NSM implementations, that is used to manage the opaque "priv" argument for the NSMPROC_MON and NLMPROC_SM_NOTIFY calls. Construct the "priv" cookie when the nsm_handle is created. The nsm_init_private() function may look a little strange, but it is roughly equivalent to how the XDR encoder formed the "priv" argument. It's going to go away soon. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Move nsm_find() to fs/lockd/mon.cChuck Lever2009-01-061-0/+6
| | | | | | | | | | | | | | | | | | | | | | The nsm_find() function sets up fresh nsm_handle entries. This is where we will store the "priv" cookie used to lookup nsm_handles during reboot recovery. The cookie will be constructed when nsm_find() creates a new nsm_handle. As much as possible, I would like to keep everything that handles a "priv" cookie in fs/lockd/mon.c so that all the smarts are in one source file. That organization should make it pretty simple to see how all this works. To me, it makes more sense than the current arrangement to keep nsm_find() with nsm_monitor() and nsm_unmonitor(). So, start reorganizing by moving nsm_find() into fs/lockd/mon.c. The nsm_release() function comes along too, since it shares the nsm_lock global variable. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Move NSM program and procedure numbers to fs/lockd/mon.cChuck Lever2009-01-061-9/+0
| | | | | | | | | | | | | | | Clean up: Move the RPC program and procedure numbers for NSM into the one source file that needs them: fs/lockd/mon.c. And, as with NLM, NFS, and rpcbind calls, use NSMPROC_FOO instead of SM_FOO for NSM procedure numbers. Finally, make a couple of comments more precise: what is referred to here as SM_NOTIFY is really the NLM (lockd) NLMPROC_SM_NOTIFY downcall, not NSMPROC_NOTIFY. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Move NSM-related XDR data structures to lockd's xdr.hChuck Lever2009-01-061-20/+0
| | | | | | | | Clean up: NSM's XDR data structures are used only in fs/lockd/mon.c, so move them there. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: Move the public declaration of nsm_unmonitor() to lockd.hChuck Lever2009-01-062-1/+1
| | | | | | | | | | | | | Clean up. Make the nlm_host argument "const," and move the public declaration to lockd.h. Add a documenting comment. Bruce observed that nsm_unmonitor()'s only caller doesn't care about its return code, so make nsm_unmonitor() return void. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Release nsmhandle in nlm_destroy_hostChuck Lever2009-01-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | The nsm_handle's reference count is bumped in nlm_lookup_host(). It should be decremented in nlm_destroy_host() to make it easier to see the balance of these two operations. Move the nsm_release() call to fs/lockd/host.c. The h_nsmhandle pointer is set in nlm_lookup_host(), and never cleared. The nlm_destroy_host() function is never called for the same nlm_host twice, so h_nsmhandle won't ever be NULL when nsm_unmonitor() is called. All references to the nlm_host are gone before it is freed. We can skip making h_nsmhandle NULL just before the nlm_host is deallocated. It's also likely we can remove the h_nsmhandle NULL check in nlmsvc_is_client() as well, but we can do that later when rearchitect- ing the nlm_host cache. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: Move the public declaration of nsm_monitor() to lockd.hChuck Lever2009-01-062-1/+4
| | | | | | | | | | | | | Clean up. Make the nlm_host argument "const," and move the public declaration to lockd.h with other NSM public function (nsm_release, eg) and global variable declarations. Add a documenting comment. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Support IPv6 version of mon_nameChuck Lever2009-01-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls is a string that contains the hostname or IP address of the remote peer to be notified when this host has rebooted. The sm-notify command uses this identifier to contact the peer when we reboot, so it must be either a well-qualified DNS hostname or a presentation format IP address string. When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM provides a presentation format IP address in the "mon_name" argument. Otherwise, the "caller_name" argument from NLM requests is used, which is usually just the DNS hostname of the peer. To support IPv6 addresses for the mon_name argument, we use the nsm_handle's address eye-catcher, which already contains an appropriate presentation format address string. Using the eye-catcher string obviates the need to use a large buffer on the stack to form the presentation address string for the upcall. This patch also addresses a subtle bug. An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the same peer are required to use the same value for the "mon_name" argument. Otherwise, rpc.statd's NSMPROC_UNMON processing cannot locate the database entry for that peer and remove it. If the setting of nsm_use_hostnames is changed between the time the kernel sends an NSMPROC_MON request and the time it sends the NSMPROC_UNMON request for the same peer, the "mon_name" argument for these two requests may not be the same. This is because the value of "mon_name" is currently chosen at the moment the call is made based on the setting of nsm_use_hostnames To ensure both requests pass identical contents in the "mon_name" argument, we now select which string to use for the argument in the nsm_monitor() function. A pointer to this string is saved in the nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall. NB: There are other potential problems, such as how nlm_host_rebooted() might behave if nsm_use_hostnames were changed while hosts are still being monitored. This patch does not attempt to address those problems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NSM: Use modern style for sm_name field in nsm_handleChuck Lever2009-01-061-1/+1
| | | | | | | | | | | | Clean up: I'm about to add another "char *" field to the nsm_handle structure. The sm_name field uses an older style of declaring a "char *" field. If I match that style for the new field, checkpatch.pl will complain. So, fix the sm_name field to use the new style. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: Support IPv6 scope IDs in nlm_display_address()Chuck Lever2009-01-061-1/+9
| | | | | | | | | | | | | Scope ID support is needed since the kernel's NSM implementation is about to use these displayed addresses as a mon_name in some cases. When nsm_use_hostnames is zero, without scope ID support NSM will fail to handle peers that contact us via a link-local address. Link-local addresses do not work without an interface ID, which is stored in the sockaddr's sin6_scope_id field. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: Remove address eye-catcher buffers from nlm_hostChuck Lever2009-01-061-3/+1
| | | | | | | | | | | | | | | | The h_name field in struct nlm_host is a just copy of h_nsmhandle->sm_name. Likewise, the contents of the h_addrbuf field should be identical to the sm_addrbuf field. The h_srcaddrbuf field is used only in one place for debugging. We can live without this until we get %pI formatting for printk(). Currently these buffers are 48 bytes, but we need to support scope IDs in IPv6 presentation addresses, which means making the buffers even larger. Instead, let's find ways to eliminate them to save space. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NLM: Use modern style for pointer fields in nlm_hostChuck Lever2009-01-061-3/+3
| | | | | | | | | | | | Clean up: I'm about to add another "char *" field to the nlm_host structure. The h_name field, for example, uses an older style of declaring a "char *" field. If I match that style for the new field, checkpatch.pl will complain. So, fix pointer fields to use the new style. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* sunrpc: add sv_maxconn field to svc_serv (try #3)Jeff Layton2009-01-061-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | svc_check_conn_limits() attempts to prevent denial of service attacks by having the service close old connections once it reaches a threshold. This threshold is based on the number of threads in the service: (serv->sv_nrthreads + 3) * 20 Once we reach this, we drop the oldest connections and a printk pops to warn the admin that they should increase the number of threads. Increasing the number of threads isn't an option however for services like lockd. We don't want to eliminate this check entirely for such services but we need some way to increase this limit. This patch adds a sv_maxconn field to the svc_serv struct. When it's set to 0, we use the current method to calculate the max number of connections. RPC services can then set this on an as-needed basis. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: document new filehandle fsid typesJ. Bruce Fields2009-01-061-0/+4
| | | | | | Descriptions taken from mountd code (in nfs-utils/utils/mountd/cache.c). Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds2009-01-051-2/+26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm snapshot: extend exception store functions dm snapshot: split out exception store implementations dm snapshot: rename struct exception_store dm snapshot: separate out exception store interface dm mpath: move trigger_event to system workqueue dm: add name and uuid to sysfs dm table: rework reference counting dm: support barriers on simple devices dm request: extend target interface dm request: add caches dm ioctl: allow dm_copy_name_and_uuid to return only one field dm log: ensure log bitmap fits on log device dm log: move region_size validation dm log: avoid reinitialising io_req on every operation dm: consolidate target deregistration error handling dm raid1: fix error count dm log: fix dm_io_client leak on error paths dm snapshot: change yield to msleep dm table: drop reference at unbind
| * dm: support barriers on simple devicesAndi Kleen2009-01-061-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement barrier support for single device DM devices This patch implements barrier support in DM for the common case of dm linear just remapping a single underlying device. In this case we can safely pass the barrier through because there can be no reordering between devices. NB. Any DM device might cease to support barriers if it gets reconfigured so code must continue to allow for a possible -EOPNOTSUPP on every barrier bio submitted. - agk Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm request: extend target interfaceKiyoshi Ueda2009-01-061-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the following target interfaces for request-based dm. map_rq : for mapping a request rq_end_io : for finishing a request busy : for avoiding performance regression from bio-based dm. Target can tell dm core not to map requests now, and that may help requests in the block layer queue to be bigger by I/O merging. In bio-based dm, this behavior is done by device drivers managing the block layer queue. But in request-based dm, dm core has to do that since dm core manages the block layer queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm: consolidate target deregistration error handlingMikulas Patocka2009-01-061-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change dm_unregister_target to return void and use BUG() for error reporting. dm_unregister_target can only fail because of programming bug in the target driver. It can't fail because of user's behavior or disk errors. This patch changes unregister_target to return void and use BUG if someone tries to unregister non-registered target or unregister target that is in use. This patch removes code duplication (testing of error codes in all dm targets) and reports bugs in just one place, in dm_unregister_target. In some target drivers, these return codes were ignored, which could lead to a situation where bugs could be missed. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* | Merge branch 'for-next' of git://git.o-hand.com/linux-mfdLinus Torvalds2009-01-058-38/+256
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-next' of git://git.o-hand.com/linux-mfd: (30 commits) mfd: Fix section mismatch in da903x mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd mfd: dm355evm msp430 driver mfd: Add missing break from wm3850-core mfd: Add WM8351 support mfd: Support configurable numbers of DCDCs and ISINKs on WM8350 mfd: Handle missing WM8350 platform data mfd: Add WM8352 support mfd: Use irq_to_desc in twl4030 code power_supply: Add Dialog DA9030 battery charger driver mfd: Dialog DA9030 battery charger MFD driver mfd: Register WM8400 codec device mfd: Pass driver_data onto child devices mfd: Fix twl4030-core.c build error mfd: twl4030 regulator bug fixes mfd: twl4030: create some regulator devices mfd: twl4030: cleanup symbols and OMAP dependency mfd: twl4030: simplified child creation code power_supply: Add battery health reporting for WM8350 ...
| * | mfd: dm355evm msp430 driverDavid Brownell2009-01-041-0/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basic MFD framework for the MSP430 microcontroller firmware used on the dm355evm board: - Provides an interface for other drivers: register read/write utilities, and register declarations. - Directly exports: * Many signals through the GPIO framework + LEDs + SW6 through gpio sysfs + NTSC/nPAL jumper through gpio sysfs + ... more could be added later, e.g. MMC signals * Child devices: + LEDs, via leds-gpio child (and default triggers) + RTC, via rtc-dm355evm child device + Buttons and IR control, via dm355evm_keys - Supports power-off system call. Use the reset button to power the board back up; the power supply LED will be on, but the MSP430 waits to re-activate the regulators. - On probe() this: * Announces firmware revision * Turns off the banked LEDs * Exports the resources noted above * Hooks the power-off support * Muxes tvp5146 -or- imager for video input Unless the new tvp514x driver (tracked for mainline) is configured, this assumes that some custom imager driver handles video-in. This completely ignores the registers reporting the output voltages on the various power supplies. Someone could add a hwmon interface if that seems useful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: Add WM8351 supportMark Brown2009-01-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: Support configurable numbers of DCDCs and ISINKs on WM8350Mark Brown2009-01-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: Add WM8352 supportMark Brown2009-01-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: Dialog DA9030 battery charger MFD driverMike Rapoport2009-01-041-2/+42
| | | | | | | | | | | | | | | | | | | | | | | | This patch amends DA903x MFD driver with definitions and methods needed for battery charger driver. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: twl4030 regulator bug fixesDavid Brownell2009-01-041-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This contains two bugfixes to the initial twl4030 regulator support patch related to USB: (a) always overwrite the old list of consumers ... else the regulator handles all use the same "usb1v5" name; (b) don't set up the "usbcp" regulator, which turns out to be managed through separate controls, usually ULPI directly from the OTG controller. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: twl4030: create some regulator devicesDavid Brownell2009-01-041-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initial code to create twl4030 voltage regulator devices, using the new regulator framework. Note that this now starts to care what name is used to declare the TWL chip: - TWL4030 is the "old" chip; newer ones have a bigger variety of VAUX2 voltages. - TWL5030 is the core "new" chip; TPS65950 is its catalog version. - The TPS65930 and TPS65920 are cost-reduced catalog versions of TWL5030 parts ... fewer regulators, no battery charger, etc. Board-specific regulator configuration should be provided, listing which regulators are used and their constraints (e.g. 1.8V only). Code that could ("should"?) leverage the regulator stuff includes TWL4030 USB transceiver support and MMC glue, LCD support for the 3430SDP and Labrador boards, and S-Video output. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: twl4030: cleanup symbols and OMAP dependencyDavid Brownell2009-01-041-31/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Finish removing dependency of TWL driver stack on platform-specific IRQ definitions ... and remove the build dependency on OMAP. This lets the TWL4030 code be included in test builds for most platforms, and will make it easier for non-OMAP folk to update most of this code for new APIs etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | power_supply: Add battery health reporting for WM8350Mark Brown2009-01-041-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement support for reporting battery health in the WM8350 battery interface. Since we are now able to report this via the classs remove the diagnostics from the interrupt handler. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | power_supply: Add cold to the POWER_SUPPLY_HEALTH report valuesMark Brown2009-01-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some systems are able to report problems with batteries being under temperature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: Refactor WM8350 chip identificationMark Brown2009-01-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: Switch WM8350 revision detection to a feature based modelMark Brown2009-01-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | power_supply: Add support for WM8350 PMUMark Brown2009-01-042-1/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the PMU provided by the WM8350 which implements battery, line and USB supplies including a battery charger. The hardware functions largely autonomously, with minimal software control required to initiate fast charging. Support for configuration of the USB supply is not yet implemented. This means that the hardware will remain in the mode configured at startup, by default limiting the current drawn from USB to 100mA. This driver was originally written by Liam Girdwood with subsequent updates for submission by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: allow reading entire register banks on twl4030David Brownell2009-01-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Minor change to the TWL4030 utility interface: support reads of all 256 bytes in each register bank (vs just 255). This can help when debugging, but is otherwise a NOP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: Add AUXADC support for WM8350Mark Brown2009-01-042-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
| * | mfd: Add WM8350 revision H supportMark Brown2009-01-041-0/+1
| | | | | | | | | | | | | | | | | | | | | No other software changes are required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds2009-01-052-0/+25
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: convert to stop_machine_create/destroy. stop_machine: introduce stop_machine_create/destroy. parisc: fix module loading failure of large kernel modules module: fix module loading failure of large kernel modules for parisc module: fix warning of unused function when !CONFIG_PROC_FS kernel/module.c: compare symbol values when marking symbols as exported in /proc/kallsyms. remove CONFIG_KMOD
| * | | stop_machine: introduce stop_machine_create/destroy.Heiko Carstens2009-01-051-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce stop_machine_create/destroy. With this interface subsystems that need a non-failing stop_machine environment can create the stop_machine machine threads before actually calling stop_machine. When the threads aren't needed anymore they can be killed with stop_machine_destroy again. When stop_machine gets called and the threads aren't present they will be created and destroyed automatically. This restores the old behaviour of stop_machine. This patch also converts cpu hotplug to the new interface since it is special: cpu_down calls __stop_machine instead of stop_machine. However the kstop threads will only be created when stop_machine gets called. Changing the code so that the threads would be created automatically on __stop_machine is currently not possible: when __stop_machine gets called we hold cpu_add_remove_lock, which is the same lock that create_rt_workqueue would take. So the workqueue needs to be created before the cpu hotplug code locks cpu_add_remove_lock. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | | module: fix module loading failure of large kernel modules for pariscHelge Deller2009-01-051-0/+3
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When creating the final layout of a kernel module in memory, allow the module loader to reserve some additional memory in front of a given section. This is currently only needed for the parisc port which needs to put the stub entries there to fulfill the 17/22bit PCREL relocations with large kernel modules like xfs. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (renamed fn)
* | | Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds2009-01-051-0/+8
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: swiotlb: Don't include linux/swiotlb.h twice in lib/swiotlb.c intel-iommu: fix build error with INTR_REMAP=y and DMAR=n swiotlb: add missing __init annotations
| * | | intel-iommu: fix build error with INTR_REMAP=y and DMAR=nIngo Molnar2009-01-041-0/+8
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dmar.o can be built in the CONFIG_INTR_REMAP=y case but iommu_calculate_agaw() is only available if VT-d is built as well. So create an inline version of iommu_calculate_agaw() for the !CONFIG_DMAR case. The iommu->agaw value wont be used in this case, but the code is cleaner (has less #ifdefs) if we have it around unconditionally. Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2009-01-052-9/+9
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (22 commits) HID: fix error condition propagation in hid-sony driver HID: fix reference count leak hidraw HID: add proper support for pensketch 12x9 tablet HID: don't allow DealExtreme usb-radio be handled by usb hid driver HID: fix default Kconfig setting for TopSpeed driver HID: driver for TopSeed Cyberlink quirky remote HID: make boot protocol drivers depend on EMBEDDED HID: avoid sparse warning in HID_COMPAT_LOAD_DRIVER HID: hiddev cleanup -- handle all error conditions properly HID: force feedback driver for GreenAsia 0x12 PID HID: switch specialized drivers from "default y" to !EMBEDDED HID: set proper dev.parent in hidraw HID: add dynids facility HID: use GFP_KERNEL in hid_alloc_buffers HID: usbhid, use usb_endpoint_xfer_int HID: move usbhid flags to usbhid.h HID: add n-trig digitizer support HID: add phys and name ioctls to hidraw HID: struct device - replace bus_id with dev_name(), dev_set_name() HID: automatically call usbhid_set_leds in usbhid driver ...
| * | | HID: avoid sparse warning in HID_COMPAT_LOAD_DRIVERHannes Eder2009-01-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: include a prototype for the exported function in the macro Fix about 20 of this warnings: drivers/hid/hid-a4tech.c:162:1: warning: symbol 'hid_compat_a4tech' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
OpenPOWER on IntegriCloud