summaryrefslogtreecommitdiffstats
path: root/include/linux/regulator/driver.h
Commit message (Collapse)AuthorAgeFilesLines
* regulator: core: update kernel documentation for regulator_descNishanth Menon2013-03-011-0/+2
| | | | | | | | | | | | | | | | | commit df367931 (regulator: core: Provide regmap get/set bypass operations) introduced regulator_[gs]et_bypass_regmap However structure documentation for regulator_desc needs an update. ./scripts/kernel-doc include/linux/regulator/driver.h >/dev/null generates: Warning(include/linux/regulator/driver.h:233): No description found for parameter 'bypass_reg' Warning(include/linux/regulator/driver.h:233): No description found for parameter 'bypass_mask' Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: core: Allow specify apply_[reg|bit] for regmap based voltage_sel ↵Axel Lin2012-12-241-0/+6
| | | | | | | | | | | | | operations Some DVM regulators needs to update apply_bit after setting vsel_reg to initiate voltage change on the output. This patch adds apply_reg and apply_bit to struct regulator_desc and update regulator_set_voltage_sel_regmap() to set apply_bit of apply_reg when apply_bit is set. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge remote-tracking branch 'regulator/topic/min' into regulator-nextMark Brown2012-12-101-0/+2
|\
| * regulator: core: Allow specific minimal selector for starting linear mappingAxel Lin2012-11-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drivers (at least 3 drivers) have such variant of linear mapping that the first few selectors are invalid and the reset are linear mapping. Let's support this case in core. This patch adds linear_min_sel in struct regulator_desc, so we can allow specific minimal selector for starting linear mapping. Then extends regulator_[map|list]_voltage_linear() to support this feature. Note that for selectors less than min_linear_index, we need count them to n_voltages so regulator_list_voltage() won't fail while checking the boundary for selector before calling list_voltage callback. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | regulator: core: Support for continuous voltage rangePawel Moll2012-10-151-0/+3
|/ | | | | | | | | | | Some regulators can set any voltage within the constraints range, not being limited to specified operating points. This patch makes it possible to describe such regulator and makes the regulator_is_supported_voltage() function behave correctly. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
*---. Merge remote-tracking branches 'regulator/topic/core', ↵Mark Brown2012-09-281-1/+17
|\ \ \ | | | | | | | | | | | | 'regulator/topic/bypass', 'regulator/topic/tol', 'regulator/topic/drivers' and 'regulator/topic/tps6586x' into regulator-next
| | | * regulator: Update comment for set_current_limit callback of struct regulator_opsAxel Lin2012-08-281-0/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | The regulators should be tending to the maximum in the available range and consumers should specify the widest range possible. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * regulator: core: Provide regmap get/set bypass operationsMark Brown2012-09-101-0/+4
| | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * regulator: core: Support bypass modeMark Brown2012-09-101-0/+10
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many regulators support a bypass mode where they simply switch their input supply to the output. This is mainly used in low power retention states where power consumption is extremely low so higher voltage or less clean supplies can be used. Support this by providing ops for the drivers and a consumer API which allows the device to be put into bypass mode if all consumers enable it and the machine enables permission for this. This is not supported as a mode since the existing modes are rarely used due to fuzzy definition and mostly redundant with modern hardware which is able to respond promptly to load changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Graeme Gregory <gg@slimlogic.co.uk>
| * regulator: Clarify documentation for regmap in the configMark Brown2012-08-311-1/+2
|/ | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'regulator-drivers' into regulator-nextMark Brown2012-07-221-0/+23
|\
| * regulator: core: Add core support for GPIO controlled enable linesMark Brown2012-07-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is very common for regulators to support having their enable signal controlled by a GPIO. Since there are a bunch of fiddly things to get right like handling the operations when the enable signal is tied to a rail and it's just replicated code add support for this to the core. Drivers should set ena_gpio in their config if they have a GPIO control, using ena_gpio_flags to specify any flags (including GPIOF_OUT_INIT_ for the initial state) and ena_gpio_invert if the GPIO is active low. The core will then override any enable and disable operations the driver has and instead control the specified GPIO. This will in the future also allow us to further extend the core by identifying when several enable signals have been tied together and handling this properly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * regulator: core: Allow fixed enable_time to be set in the regulator_descMark Brown2012-07-031-0/+4
| | | | | | | | | | | | | | | | Many regulators have a fixed specification for their enable time. Allow this to be set in the regulator_desc as a number to save them having to implement an explicit operation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * regulator: core: Change the unit of ramp_delay from mV/uS to uV/uSAxel Lin2012-06-181-1/+1
| | | | | | | | | | | | | | | | This change makes it possible to set ramp_delay with 0.xxx mV/uS without truncation issue. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * regulator: Add ramp_delay configuration to constraintsYadwinder Singh Brar2012-06-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some hardwares ramp_delay for BUCKs is a configurable parameter which can be configured through DT or board file.This patch adds ramp_delay to regulator constraints and allow user to configure it for regulators which supports this feature, through DT or board file. It will provide two ways of setting the ramp_delay for a regulator: First, by setting it as constraints in board file(for configurable regulators) and set_machine_constraints() will take care of setting it on hardware by calling(the provided) .set_ramp_delay() operation(callback). Second, by setting it as data in regulator_desc(as fixed/default ramp_delay rate) for a regulator in driver. regulator_set_voltage_time_sel() will give preference to constraints->ramp_delay while reading ramp_delay rate for regulator. Similarly users should also take care accordingly while refering ramp_delay rate(in case of implementing their private .set_voltage_time_sel() callbacks for different regulators). [Rewrote subject for 80 columns -- broonie] Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * regulator: core: Add regulator_set_voltage_time_sel to calculate ramp delay.Yadwinder Singh Brar2012-06-111-0/+5
| | | | | | | | | | | | | | | | | | | | This patch adds regulator_set_voltage_time_sel(), to move into core, the commonly used code by drivers to provide the .set_voltage_time_sel callback. It will also allow us to configure different ramp delay for different regulators easily. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | regulator: Add REGULATOR_STATUS_UNDEFINED.Krystian Garbaciak2012-07-121-0/+2
|/ | | | | | | | REGULATOR_STATUS_UNDEFINED is to be returned by regulator, if any other state doesn't really apply. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: core: Allow drivers to set voltage mapping table in regulator_descAxel Lin2012-06-031-0/+5
| | | | | | | | | | Some regulator hardware use table based mapping can set volt_table in regulator_desc and use regulator_list_voltage_table() for their list_voltage callback. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: core: Allow drivers to set simple linear voltage maps as dataMark Brown2012-05-121-2/+13
| | | | | | | | | | | | | | A lot of regulator hardware maps selectors on to voltages with a simple linear mapping function selector = base + (selector * step size) Provide off the shelf list_voltage() and map_voltage() operations which use new min_uV and uV_step members in the regulator_desc to implement this function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* regulator: core: Allow regulators to provide a voltage to selector mappingMark Brown2012-05-121-0/+4
| | | | | | | | | | | | In order to allow more drivers to factor things out into data allow drivers to provide a mapping function to convert voltages into selectors. This allows any driver to use set_voltage_sel(). The existing mapping based on iterating over list_voltage() is provided as an operation which can be assigned to the new map_voltage() function though for ease of transition it is treated as the default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* regulator: core: Provide standard enable operations for regmap usersMark Brown2012-04-161-0/+7
| | | | | | | | | | | | | | | | Since the enable(), disable() and is_enabled() operations for most regmap based regulators come down to reading and updating a single register bit we can factor out the code and allow these drivers to just define which bit to update using the enable_reg and enable_mask fields in their desc and then use operations provided by the core. As well as the code saving this opens the door to future optimisation of the bulk operations - if the core can realise that we are updating a single register for multiple regulators then it should be able to combine these updates into a single physical operation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* regulator: core: Provide regmap based voltage_sel operationsMark Brown2012-04-161-0/+9
| | | | | | | | | | | | | | | | Since the voltage selector operations are intended to directly map a bitfield in the device register map into regulator API operations the code for implementing them is usually very standard we can save some code by providing standard implementations for devices using the regmap API. Drivers using regmap can pass their regmap in in the regmap_config struct, set vsel_reg and vsel_mask in their regulator_desc and then use regulator_{get,set}_voltage_sel_regmap in their ops. This saves a small amount of code from each driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* regulator: core: Allow drivers to pass in a regmapMark Brown2012-04-161-0/+4
| | | | | | | | | Since many regulators use regmap for register I/O and since there's quite a few very common patterns in the code allow drivers to pass in a regmap to the core for use in generic code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* regulator: core: Use a struct to pass in regulator runtime configurationMark Brown2012-04-091-5/+26
| | | | | | | | | | | | | | Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: core: Constify the regulator_desc passed in when registeringMark Brown2012-04-041-2/+3
| | | | | | | | Drivers should be able to declare their descriptors const and the framework shouldn't ever be modifying the desciptor. Make the parameter and the pointer in regulator_dev const to enforce this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: Remove ifdefs for debugfs codeStephen Boyd2012-02-211-2/+0
| | | | | | | | | | | | | If CONFIG_DEBUG_FS=y debugfs functions will never return an ERR_PTR. Instead they'll return NULL. The intent is to remove ifdefs in calling code. Update the code to reflect this. We gain an extra dentry pointer per struct regulator and struct regulator_dev but that should be ok because most distros have debugfs compiled in anyway. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: fix wrong header name in descriptionKim, Milo2012-02-161-2/+2
| | | | | | | | | The 'mode' is defined in consumer.h. * patch base version : linux-3.2.4 Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: map consumer regulator based on device treeRajendra Nayak2011-11-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device nodes in DT can associate themselves with one or more regulators/supply by providing a list of phandles (to regulator nodes) and corresponding supply names. For Example: devicenode: node@0x0 { ... ... vmmc-supply = <&regulator1>; vpll-supply = <&regulator2>; }; The driver would then do a regulator_get(dev, "vmmc"); to get regulator1 and do a regulator_get(dev, "vpll"); to get regulator2. of_get_regulator() extracts the regulator node for a given device, based on the supply name. Use it to look up the regulator for a given consumer from device tree, during a regulator_get(). If not found fallback and lookup through the regulator_map_list instead. Also, since the regulator dt nodes can use the same binding to associate with a parent regulator/supply, allow the drivers to specify a supply_name, which can then be used to lookup dt to find the parent phandle. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: pass additional of_node to regulator_register()Rajendra Nayak2011-11-231-1/+1
| | | | | | | | | | | With device tree support for regulators, its needed that the regulator_dev->dev device has the right of_node attached. To be able to do this add an additional parameter to the regulator_register() api, wherein the dt-adapted driver can then pass this additional info onto the regulator core. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: Fix implicit use of notifier.h by driver.hPaul Gortmaker2011-10-311-0/+1
| | | | | | | | | | | This was implicitly appearing by way of module.h -- but when we fix that, we'll get this: In file included from drivers/regulator/dummy.c:21: include/linux/regulator/driver.h:197: error: field 'notifier' has incomplete type make[3]: *** [drivers/regulator/dummy.o] Error 1 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* regulator: Implement deferred disable supportMark Brown2011-09-141-0/+3
| | | | | | | | | | | | | | | | It is a reasonably common pattern for hardware to require some delay after being quiesced before the disable has finalised, especially in mixed signal devices. For example, an active discharge may be required to ensure that the circuit starts up again in a known state. Avoid having to implement such delays in the regulator API by providing regulator_deferred_disable() which will do a regulator_disable() a specified number of milliseconds after it is called. Due to the reference counting done on regulators a deferred disable can be cancelled by doing another regulator_enable(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* regulator: Refactor supply implementation to work as regular consumersMark Brown2011-06-091-3/+1
| | | | | | | | | | | | | | | Currently the regulator supply implementation is somewhat complex and fragile as it doesn't look like standard consumers but is instead a parallel implementation. This causes issues with locking and reference counting. Move the implementation over to using standard consumers to address this. Rather than only notifying the supply on the first enable/disable we do so every time the regulator is enabled or disabled, simplifying locking as we don't need to hold a lock on the consumer we are about to enable. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: add set_voltage_time_sel infrastructureLinus Walleij2011-03-261-2/+9
| | | | | | | | | | | This makes it possible to set the stabilization time for voltage regulators in the same manner as enable_time(). The interface only supports regulators that implements fixed selectors. Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Add initial per-regulator debugfs supportMark Brown2011-01-121-2/+6
| | | | | | | | We only expose the use and open counts to userspace, providing a tiny bit of insight into what the API is up to. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Provide a selector based set_voltage_sel() operationMark Brown2011-01-121-0/+3
| | | | | | | | | | | | | | | | | | Many regulator drivers implement voltage setting by looping through a table of possible values, normally because the set of available voltages can't be mapped onto selectors with simple calcuation. Factor out these loops by providing a variant of set_voltage() which takes a selector rather than a voltage range as an argument and implementing a loop through the available selectors in the core. This is not going to be suitable for use with all devices as when the regulator voltage can be mapped onto selector values with a simple calculation the linear scan through the available values will be more expensive than just doing the calculation, especially for regulators that provide fine grained voltage control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Allow drivers to report voltages as selectorsMark Brown2011-01-121-0/+3
| | | | | | | | | | Since drivers already have to provide an API for translating selectors into voltages they may as well just report the selector values directly to the core API rather than implement the lookup themselves. The old interface is left in place for now, but may be removed in future. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Copy constraints from regulators when initialising themMark Brown2011-01-121-1/+1
| | | | | | | | | | | | | | | Currently the regulator API uses the constraints structure passed in to the core throughout the lifetime of the object. This means that it is not possible to mark the constraints as __initdata so if the kernel supports many boards the constraints for all of them are kept around throughout the lifetime of the system, consuming memory needlessly. By copying constraints that are actually used we allow the use of __initdata, saving memory when multiple boards are supported. This also means the constraints can be const. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Report actual configured voltage to set_voltage()Mark Brown2011-01-121-1/+2
| | | | | | | | | | | Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Allow regulators to specify the time taken to ramp on enableMark Brown2010-03-031-0/+6
| | | | | | | | | | | | | | | | | Regulators may sometimes take longer to enable than the control operation used to do so, either because the regulator has ramp rate control used to limit inrush current or because the control operation is very fast (GPIO being the most common example of this). In order to ensure that consumers do not rely on the regulator before it is enabled provide an enable_time() operation and have the core delay for that time before returning to the caller. This is implemented as a function since the ramp rate may be specified in voltage per unit time and therefore the time depend on the configuration. In future it would be desirable to allow the bulk operations to run the delays for multiple enables in parallel but this is not currently supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator/driver: be more specific in nanodoc for is_enabledWolfram Sang2009-09-221-1/+2
| | | | | | | | | Document the possibility that is_enabled may also return with negative errorcodes. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Add regulator_get_exclusive() APIMark Brown2009-09-221-0/+2
| | | | | | | | | | | | | | | | | | | | | Some consumers require complete control of the regulator and can't tolerate sharing it with other consumers, most commonly because they need to have the regulator actually disabled so can't have other consumers forcing it on. This new regulator_get_exclusive() API call allows these consumers to explicitly request this, documenting the assumptions that they are making. In order to simplify coding of such consumers the use count for regulators they request is forced to match the enabled state of the regulator when it is requested. This is not possible for consumers which can share regulators due to the need to keep track of the ownership of use counts. A new API call is used rather than an additional argument to the existing regulator_get() in order to avoid merge headaches with driver code in other trees. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Provide mode to status conversion functionMark Brown2009-09-171-0/+2
| | | | | | | This is useful for implementing get_status() in terms of get_mode(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: fix header file missing kernel-docRandy Dunlap2009-04-281-0/+1
| | | | | | | | | | | Add regulator header file missing kernel-doc: Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Liam Girdwood <lrg@slimlogic.co.uk> cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: get_status() grows kerneldocDavid Brownell2009-03-311-9/+10
| | | | | | | | | | | | | | | Add kerneldoc for the new get_status() message. Fix the existing kerneldoc for that struct in two ways: (a) Syntax, making sure parameter descriptions immediately follow the one-line struct description and that the first blank lines is before any more expansive description; (b) Presentation for a few points, to highlight the fact that the previous "get" methods exist only to report the current configuration, not to display actual status. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: enumerate voltages (v2)David Brownell2009-03-311-0/+9
| | | | | | | | | | | | | | | | | | | Add a basic mechanism for regulators to report the discrete voltages they support: list_voltage() enumerates them using selectors numbered from 0 to an upper bound. Use those methods to force machine-level constraints into bounds. (Example: regulator supports 1.8V, 2.4V, 2.6V, 3.3V, and board constraints for that rail are 2.0V to 3.6V ... so the range of voltages is then 2.4V to 3.3V on this board.) Export those voltages to the regulator consumer interface, so for example regulator hooked up to an MMC/SD/SDIO slot can report the actual voltage options available to cards connected there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: email - update email address and regulator webpage.Liam Girdwood2009-03-311-1/+1
| | | | | | | Remove deceased email address and update to new address. Also update website details in MAINTAINERS with correct page. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: fix header file missing kernel-docRandy Dunlap2009-03-311-0/+1
| | | | | | | | | | | Fix regulator/driver.h missing kernel-doc: Warning(linux-next-20090120//include/linux/regulator/driver.h:108): No description found for parameter 'get_status' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Liam Girdwood <lrg@slimlogic.co.uk> cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Hoist struct regulator_dev out of core to fix notifiersMark Brown2009-03-311-0/+32
| | | | | | | | | Commit 872ed3fe176833f7d43748eb88010da4bbd2f983 caused regulator drivers to take the struct regulator_dev lock themselves which requires that the struct be visible to them. Band aid this by making the struct visible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Pass regulator init data as explict argument when registeringMark Brown2009-03-311-1/+2
| | | | | | | | | | | Rather than having the regulator init data read from the platform_data member of the struct device that is registered for the regulator make the init data an explict argument passed in when registering. This allows drivers to use the platform data for their own purposes if they wish. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: add get_status()David Brownell2009-03-311-0/+17
| | | | | | | | | | | | | | | | | | | | | Based on previous LKML discussions: * Update docs for regulator sysfs class attributes to highlight the fact that all current attributes are intended to be control inputs, including notably "state" and "opmode" which previously implied otherwise. * Define a new regulator driver get_status() method, which is the first method reporting regulator outputs instead of inputs. It can report on/off and error status; or instead of simply "on", report the actual operating mode. For the moment, this is a sysfs-only interface, not accessible to regulator clients. Such clients can use the current notification interfaces to detect errors, if the regulator reports them. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
OpenPOWER on IntegriCloud