summaryrefslogtreecommitdiffstats
path: root/include/linux/raid
Commit message (Collapse)AuthorAgeFilesLines
* [HEADERS] One line per header in Kbuild files to reduce conflictsDavid Woodhouse2006-09-191-1/+2
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [PATCH] md: fix resync speed calculation for restarted resyncsNeilBrown2006-07-101-1/+2
| | | | | | | | | | | | | | | | | | We introduced 'io_sectors' recently so we could count the sectors that causes io during resync separate from sectors which didn't cause IO - there can be a difference if a bitmap is being used to accelerate resync. However when a speed is reported, we find the number of sectors processed recently by subtracting an oldish io_sectors count from a current 'curr_resync' count. This is wrong because curr_resync counts all sectors, not just io sectors. So, add a field to mddev to store the curren io_sectors separately from curr_resync, and use that in the calculations. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.infradead.org/hdrinstall-2.6Linus Torvalds2006-07-041-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/hdrinstall-2.6: Remove export of include/linux/isdn/tpam.h Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export Restrict headers exported to userspace for SPARC and SPARC64 Add empty Kbuild files for 'make headers_install' in remaining arches. Add Kbuild file for Alpha 'make headers_install' Add Kbuild file for SPARC 'make headers_install' Add Kbuild file for IA64 'make headers_install' Add Kbuild file for S390 'make headers_install' Add Kbuild file for i386 'make headers_install' Add Kbuild file for x86_64 'make headers_install' Add Kbuild file for PowerPC 'make headers_install' Add generic Kbuild files for 'make headers_install' Basic implementation of 'make headers_check' Basic implementation of 'make headers_install'
| * Add generic Kbuild files for 'make headers_install'David Woodhouse2006-06-181-0/+1
| | | | | | | | | | | | | | This adds the Kbuild files listing the files which are to be installed by the 'headers_install' make target, in generic directories. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [PATCH] md: Don't write dirty/clean update to spares - leave them aloneNeilBrown2006-06-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - record the 'event' count on each individual device (they might sometimes be slightly different now) - add a new value for 'sb_dirty': '3' means that the super block only needs to be updated to record a clean<->dirty transition. - Prefer odd event numbers for dirty states and even numbers for clean states - Using all the above, don't update the superblock on a spare device if the update is just doing a clean-dirty transition. To accomodate this, a transition from dirty back to clean might now decrement the events counter if nothing else has changed. The net effect of this is that spare drives will not see any IO requests during normal running of the array, so they can go to sleep if that is what they want to do. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md/bitmap: change md/bitmap file handling to use bmap to file blocksNeilBrown2006-06-261-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If md is asked to store a bitmap in a file, it tries to hold onto the page cache pages for that file, manipulate them directly, and call a cocktail of operations to write the file out. I don't believe this is a supportable approach. This patch changes the approach to use the same approach as swap files. i.e. bmap is used to enumerate all the block address of parts of the file and we write directly to those blocks of the device. swapfile only uses parts of the file that provide a full pages at contiguous addresses. We don't have that luxury so we have to cope with pages that are non-contiguous in storage. To handle this we attach buffers to each page, and store the addresses in those buffers. With this approach the pagecache may contain data which is inconsistent with what is on disk. To alleviate the problems this can cause, md invalidates the pagecache when releasing the file. If the file is to be examined while the array is active (a non-critical but occasionally useful function), O_DIRECT io must be used. And new version of mdadm will have support for this. This approach simplifies a lot of code: - we no longer need to keep a list of pages which we need to wait for, as the b_endio function can keep track of how many outstanding writes there are. This saves a mempool. - -EAGAIN returns from write_page are no longer possible (not sure if they ever were actually). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md/bitmap: remove bitmap writeback daemonNeilBrown2006-06-261-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | md/bitmap currently has a separate thread to wait for writes to the bitmap file to complete (as we cannot get a callback on that action). However this isn't needed as bitmap_unplug is called from process context and waits for the writeback thread to do it's work. The same result can be achieved by doing the waiting directly in bitmap_unplug. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: make md_print_devices() staticAdrian Bunk2006-06-261-4/+0
| | | | | | | | | | | | | | | | | | This patch makes the needlessly global md_print_devices() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: support stripe/offset mode in raid10NeilBrown2006-06-261-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "industry standard" DDF format allows for a stripe/offset layout where data is duplicated on different stripes. e.g. A B C D D A B C E F G H H E F G (columns are drives, rows are stripes, LETTERS are chunks of data). This is similar to raid10's 'far' mode, but not quite the same. So enhance 'far' mode with a 'far/offset' option which follows the layout of DDFs stripe/offset. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: allow a linear array to have drives added while activeNeilBrown2006-06-261-0/+2
| | | | | | | | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: allow checkpoint of recovery with version-1 superblockNeilBrown2006-06-262-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | For a while we have had checkpointing of resync. The version-1 superblock allows recovery to be checkpointed as well, and this patch implements that. Due to early carelessness we need to add a feature flag to signal that the recovery_offset field is in use, otherwise older kernels would assume that a partially recovered array is in fact fully recovered. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: merge raid5 and raid6 codeNeilBrown2006-06-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a lot of commonality between raid5.c and raid6main.c. This patches merges both into one module called raid456. This saves a lot of code, and paves the way for online raid5->raid6 migrations. There is still duplication, e.g. between handle_stripe5 and handle_stripe6. This will probably be cleaned up later. Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: remove arbitrary limit on chunk sizeNeilBrown2006-06-261-1/+2
|/ | | | | | | | | | | The largest chunk size the code can support without substantial surgery is 2^30 bytes, so make that the limit instead of an arbitrary 4Meg. Some day, the 'chunksize' should change to a sector-shift instead of a byte-count. Then no limit would be needed. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make sure 64bit fields in version-1 metadata are 64-bit alignedNeilBrown2006-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | reshape_position is a 64bit field that was not 64bit aligned. So swap with new_level. NOTE: this is a user-visible change. However: - The bad code has not appeared in a released kernel - This code is still marked 'experimental' - This only affects version-1 superblock, which are not in wide use - These field are only used (rather than simply reported) by user-space tools in extemely rare circumstances : after a reshape crashes in the first second of the reshape process. So I believe that, at this stage, the change is safe. Especially if people heed the 'help' message on use mdadm-2.4.1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Convert reconfig_sem to reconfig_mutexNeilBrown2006-03-271-1/+1
| | | | | | | | ... being careful that mutex_trylock is inverted wrt down_trylock Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Support suspending of IO to regions of an md arrayNeilBrown2006-03-271-0/+4
| | | | | | | | | | | | | | | | | This allows user-space to access data safely. This is needed for raid5 reshape as user-space needs to take a backup of the first few stripes before allowing reshape to commence. It will also be useful in cluster-aware raid1 configurations so that all cluster members can leave a section of the array untouched while a resync/recovery happens. A 'start' and 'end' of the suspended range are written to 2 sysfs attributes. Note that only one range can be suspended at a time. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Split reshape handler in check_reshape and start_reshapeNeilBrown2006-03-271-1/+2
| | | | | | | | | | check_reshape checks validity and does things that can be done instantly - like adding devices to raid1. start_reshape initiates a restriping process to convert the whole array. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Only checkpoint expansion progress occasionallyNeilBrown2006-03-271-0/+3
| | | | | | | | | | Instead of checkpointing at each stripe, only checkpoint when a new write would overwrite uncheckpointed data. Block any write to the uncheckpointed area. Arbitrarily checkpoint at least every 3Meg. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Checkpoint and allow restart of raid5 reshapeNeilBrown2006-03-274-3/+40
| | | | | | | | | | | | | | | | | | | We allow the superblock to record an 'old' and a 'new' geometry, and a position where any conversion is up to. The geometry allows for changing chunksize, layout and level as well as number of devices. When using verion-0.90 superblock, we convert the version to 0.91 while the conversion is happening so that an old kernel will refuse the assemble the array. For version-1, we use a feature bit for the same effect. When starting an array we check for an incomplete reshape and restart the reshape process if needed. If the reshape stopped at an awkward time (like when updating the first stripe) we refuse to assemble the array, and let user-space worry about it. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Final stages of raid5 expand codeNeilBrown2006-03-271-1/+2
| | | | | | | | | | | | | | | | This patch adds raid5_reshape and end_reshape which will start and finish the reshape processes. raid5_reshape is only enabled in CONFIG_MD_RAID5_RESHAPE is set, to discourage accidental use. Read the 'help' for the CONFIG_MD_RAID5_RESHAPE entry. and Make sure that you have backups, just in case. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Core of raid5 resize processNeilBrown2006-03-272-1/+7
| | | | | | | | | | | | | | | | | | | | | | This patch provides the core of the resize/expand process. sync_request notices if a 'reshape' is happening and acts accordingly. It allocated new stripe_heads for the next chunk-wide-stripe in the target geometry, marking them STRIPE_EXPANDING. Then it finds which stripe heads in the old geometry can provide data needed by these and marks them STRIPE_EXPAND_SOURCE. This causes stripe_handle to read all blocks on those stripes. Once all blocks on a STRIPE_EXPAND_SOURCE stripe_head are read, any that are needed are copied into the corresponding STRIPE_EXPANDING stripe_head. Once a STRIPE_EXPANDING stripe_head is full, it is marks STRIPE_EXPAND_READY and then is written out and released. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Infrastructure to allow normal IO to continue while array is ↵NeilBrown2006-03-271-0/+6
| | | | | | | | | | | | | | | | | | | | | expanding We need to allow that different stripes are of different effective sizes, and use the appropriate size. Also, when a stripe is being expanded, we must block any IO attempts until the stripe is stable again. Key elements in this change are: - each stripe_head gets a 'disk' field which is part of the key, thus there can sometimes be two stripe heads of the same area of the array, but covering different numbers of devices. One of these will be marked STRIPE_EXPANDING and so won't accept new requests. - conf->expand_progress tracks how the expansion is progressing and is used to determine whether the target part of the array has been expanded yet or not. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Allow stripes to be expanded in preparation for expanding an arrayNeilBrown2006-03-271-2/+7
| | | | | | | | | | | | | | | | | | | Before a RAID-5 can be expanded, we need to be able to expand the stripe-cache data structure. This requires allocating new stripes in a new kmem_cache. If this succeeds, we copy cache pages over and release the old stripes and kmem_cache. We then allocate new pages. If that fails, we leave the stripe cache at it's new size. It isn't worth the effort to shrink it back again. Unfortuanately this means we need two kmem_cache names as we, for a short period of time, we have two kmem_caches. So they are raid5/%s and raid5/%s-alt Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Split disks array out of raid5 conf structure so it is easier to ↵NeilBrown2006-03-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | grow The remainder of this batch implements raid5 reshaping. Currently the only shape change that is supported is added a device, but it is envisioned that changing the chunksize and layout will also be supported, as well as changing the level (e.g. 1->5, 5->6). The reshape process naturally has to move all of the data in the array, and so should be used with caution. It is believed to work, and some testing does support this, but wider testing would be great for increasing my confidence. You will need a version of mdadm newer than 2.3.1 to make use of raid5 growth. This is because mdadm need to take a copy of a 'critical section' at the start of the array incase there is a crash at an awkward moment. On restart, mdadm will restore the critical section and allow reshape to continue. I hope to release a 2.4-pre by early next week - it still needs a little more polishing. This patch: Previously the array of disk information was included in the raid5 'conf' structure which was allocated to an appropriate size. This makes it awkward to change the size of that array. So we split it off into a separate kmalloced array which will require a little extra indexing, but is much easier to grow. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] DM: Fix bug: BIO_RW_BARRIER requests to md/raid1 hang.NeilBrown2006-03-231-1/+1
| | | | | | | | | | | | Both R1BIO_Barrier and R1BIO_Returned are 4 !!!! This means that barrier requests don't get returned (i.e. b_endio called) because it looks like they already have been. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow sync-speed to be controlled per-deviceNeilBrown2006-01-061-0/+4
| | | | | | | | | Also export current (average) speed and status in sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: count corrected read errors per driveNeilBrown2006-01-061-0/+4
| | | | | | | | | | Store this total in superblock (As appropriate), and make it available to userspace via sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow array level to be set textually via sysfsNeilBrown2006-01-061-0/+1
| | | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make a couple of names in md.c staticNeilBrown2006-01-061-2/+0
| | | | | | | | .. because they aren't used outside md.c Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: define and use safe_put_page for mdNeilBrown2006-01-061-0/+5
| | | | | | | | | md sometimes call put_page on NULL pointers (treating it like kfree). This is not safe, so define and use a 'safe_put_page' which checks for NULL. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: remove personality numbering from mdNeilBrown2006-01-062-55/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: tidy up raid5/6 hash table codeNeilBrown2006-01-061-2/+2
| | | | | | | | | | | | | - replace open-coded hash chain with hlist macros - Fix hash-table size at one page - it is already quite generous, so there will never be a need to use multiple pages, so no need for __get_free_pages No functional change. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: raid10 read-error handling - resync and read-onlyNeilBrown2006-01-061-0/+7
| | | | | | | | | | | | | | | | | | Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: auto-correct correctable read errors in raid10NeilBrown2006-01-061-0/+2
| | | | | | | | Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix up some rdev rcu locking in raid5/6NeilBrown2006-01-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | There is this "FIXME" comment with a typo in it!! that been annoying me for days, so I just had to remove it. conf->disks[i].rdev should only be accessed if - we know we hold a reference or - the mddev->reconfig_sem is down or - we have a rcu_readlock handle_stripe was referencing rdev in three places without any of these. For the first two, get an rcu_readlock. For the last, the same access (md_sync_acct call) is made a little later after the rdev has been claimed under and rcu_readlock, if R5_Syncio is set. So just use that access... However R5_Syncio isn't really needed as the 'syncing' variable contains the same information. So use that instead. Issues, comment, and fix are identical in raid5 and raid6. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: handle errors when read-onlyNeilBrown2006-01-061-0/+7
| | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: attempt to auto-correct read errors in raid1NeilBrown2006-01-061-0/+3
| | | | | | | | | | | | | | On a read-error we suspend the array, then synchronously read the block from other arrays until we find one where we can read it. Then we try writing the good data back everywhere and make sure it works. If any write or subsequent read fails, only then do we fail the device out of the array. To be able to suspend the array, we need to also keep track of how many requests are queued for handling by raid1d. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix raid6 resync check/repair codeNeilBrown2006-01-061-0/+2
| | | | | | | | | | | | | | | | | | raid6 currently does not check the P/Q syndromes when doing a resync, it just calculates the correct value and writes it. Doing the check can reduce writes (often to 0) for a resync, and it is needed to properly implement the echo check > sync_action operation. This patch implements the appropriate checks and tidies up some related code. It also allows raid6 user-requested resync to bypass the intent bitmap. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: write intent bitmap support for raid10NeilBrown2006-01-061-1/+8
| | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow dirty raid[456] arrays to be started at bootNeilBrown2006-01-061-0/+1
| | | | | | | | See patch to md.txt for more details Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improve raid10 "IO Barrier" conceptNeilBrown2006-01-061-2/+2
| | | | | | | | | | | | | raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improve raid1 "IO Barrier" conceptNeilBrown2006-01-061-2/+2
| | | | | | | | | | | | | raid1 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: complete conversion of md to use kthreadsNeilBrown2005-11-091-2/+0
| | | | | | | | | | | | | | | | | | | | There are a few loose ends following the conversion of md to use kthreads: - Some fields in mdk_thread_t that aren't needed (kthreads does it's own completion and manages it's own name). - thread->run is now never NULL, so no need to check - Some tests for signal_pending that aren't needed (As we don't use signals to stop threads any more) - Some flush_signals are not needed - Some waits are interruptible and don't need to be. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: support BIO_RW_BARRIER for md/raid1NeilBrown2005-11-093-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can only accept BARRIER requests if all slaves handle barriers, and that can, of course, change with time.... So we keep track of whether the whole array seems safe for barriers, and also whether each individual rdev handles barriers. We initially assumes barriers are OK. When writing the superblock we try a barrier, and if that fails, we flag things for no-barriers. This will usually clear the flags fairly quickly. If writing the superblock finds that BIO_RW_BARRIER is -ENOTSUPP, we need to resubmit, so introduce function "md_super_wait" which waits for requests to finish, and retries ENOTSUPP requests without the barrier flag. When writing the real raid1, write requests which were BIO_RW_BARRIER but which aresn't supported need to be retried. So raid1d is enhanced to do this, and when any bio write completes (i.e. no retry needed) we remove it from the r1bio, so that devices needing retry are easy to find. We should hardly ever get -ENOTSUPP errors when writing data to the raid. It should only happen if: 1/ the device used to support BARRIER, but now doesn't. Few devices change like this, though raid1 can! or 2/ the array has no persistent superblock, so there was no opportunity to pre-test for barriers when writing the superblock. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make md on-disk bitmaps not host-endianNeilBrown2005-11-092-3/+12
| | | | | | | | | | | Current bitmaps use set_bit et.al and so are host-endian, which means not-portable. Oops. Define a new version number (4) for which bitmaps are little-endian. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: convert 'faulty' and 'in_sync' fields to bits in 'flags' fieldNeilBrown2005-11-091-4/+4
| | | | | | | | | This has the advantage of removing the confusion caused by 'rdev_t' and 'mddev_t' both having 'in_sync' fields. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improvements to raid5 handling of read errorsNeilBrown2005-11-091-0/+3
| | | | | | | | | | | | | Two refinements to the 'attempt-overwrite-on-read-error' mechanism. 1/ If the array is read-only, don't attempt an over-write. 2/ If there are more than max_nr_stripes read errors on a device with no success, fail the drive. This will make sure a dead drive will be eventually kicked even when we aren't trying to rewrite (which would normally kick a dead drive more quickly. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: change raid5 sysfs attribute to not create a new directoryNeilBrown2005-11-092-1/+7
| | | | | | | | | | | | | | | There isn't really a need for raid5 attributes to be an a subdirectory, so this patch moves them from /sys/block/mdX/md/raid5/attribute to /sys/block/mdX/md/attribute This suggests that all md personalities should co-operate about namespace usage, but that shouldn't be a problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: teach raid5 the difference between 'check' and 'repair'.NeilBrown2005-11-091-0/+4
| | | | | | | | | | | With this, raid5 can be asked to check parity without repairing it. It also keeps a count of the number of incorrect parity blocks found (mismatches) and reports them through sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow a manual resync with mdNeilBrown2005-11-091-0/+4
| | | | | | | | | | | | | | | | | | You can trigger a 'check' with echo check > /sys/block/mdX/md/scan_mode or a check-and-repair errors with echo repair > /sys/block/mdX/md/scan_mode and read the current state from the same file. Note: personalities need to know the different between 'check' and 'repair', but don't yet. Until they do, 'check' will be the same as 'repair' and will just do a normal resync pass. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud