summaryrefslogtreecommitdiffstats
path: root/include/linux/pci_ids.h
Commit message (Collapse)AuthorAgeFilesLines
* [BNX2]: Disable MSI on 5706 if AMD 8132 bridge is present.Michael Chan2006-09-291-0/+1
| | | | | | | | | | | | | | | | | | | | MSI is defined to be 32-bit write. The 5706 does 64-bit MSI writes with byte enables disabled on the unused 32-bit word. This is legal but causes problems on the AMD 8132 which will eventually stop responding after a while. Without this patch, the MSI test done by the driver during open will pass, but MSI will eventually stop working after a few MSIs are written by the device. AMD believes this incompatibility is unique to the 5706, and prefers to locally disable MSI rather than globally disabling it using pci_msi_quirk. Update version to 1.4.45. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: Add basic 5906 support.Michael Chan2006-09-281-0/+2
| | | | | | | | | Add support for the new 5709 device. This is a new 10/100 Mbps chip. The mailbox access and firmware interface are quite different from all other tg3 chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: Add 5722 and 5756 support.Michael Chan2006-09-281-0/+2
| | | | | | | Add IDs to support 5722 and 5756. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hwmon: New driver k8tempRudolf Marek2006-09-281-0/+1
| | | | | | | | | Add support for the temperature sensor(s) found in AMD K8 CPUs. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2006-09-271-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits) pciehp - fix wrong return value IA64: PCI: dont disable irq which is not enabled acpiphp: add support for ioapic hot-remove PCI: assign ioapic resource at hotplug acpiphp: disable bridges acpiphp: stop bus device before acpi_bus_trim PCI: add pci_stop_bus_device acpiphp: do not initialize existing ioapics acpiphp: initialize ioapics before starting devices acpiphp: set hpp values before starting devices PCI Hotplug: cleanup pcihp skeleton code. PCI: Restore PCI Express capability registers after PM event PCI: drivers/pci/hotplug/acpiphp_glue.c: make a function static PCI: Multiprobe sanitizer PCI: fix __must_check warnings PCI Hotplug: fix __must_check warnings SHPCHP: fix __must_check warnings PCI-Express AER implemetation: pcie_portdrv error handler PCI-Express AER implemetation: AER core and aerdriver PCI-Express AER implemetation: export pcie_port_bus_type ...
| * MSI: Blacklist PCI-E chipsets depending on Hypertransport MSI capabilityBrice Goglin2006-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce msi_ht_cap_enabled() to check the MSI capability in the Hypertransport configuration space. It is used in a generic quirk quirk_msi_ht_cap() to check whether MSI is enabled on hypertransport chipset, and a nVidia specific quirk quirk_nvidia_ck804_msi_ht_cap() where two 2 HT MSI mappings have to be checked. Both quirks set the PCI_BUS_FLAGS_NO_MSI bus flag when MSI is disabled. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [MIPS] Remove EV96100 as previously announced.Ralf Baechle2006-09-271-3/+0
|/ | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge mulgrave-w:git/scsi-misc-2.6James Bottomley2006-09-231-0/+17
|\ | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/scsi/iscsi_tcp.c drivers/scsi/iscsi_tcp.h Pretty horrible merge between crypto hash consolidation and crypto_digest_...->crypto_hash_... conversion Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * Merge ../linux-2.6James Bottomley2006-08-271-0/+1
| |\
| * | [SCSI] arcmsr: initial driver, version 1.20.00.13Erich Chen2006-07-281-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arcmsr is a driver for the Areca Raid controller, a host based RAID subsystem that speaks SCSI at the firmware level. This patch is quite a clean up over the initial submission with contributions from: Randy Dunlap <rdunlap@xenotime.net> Christoph Hellwig <hch@lst.de> Matthew Wilcox <matthew@wil.cx> Adrian Bunk <bunk@stusta.de> Signed-off-by: Erich Chen <erich@areca.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | | [PATCH] sis5513: add SiS south bridge ID 0x966 and 0x968David Wang2006-09-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New SiS south bridge device ID is 0x966. Next coming product will be 0x968. (Will be released in Q4, this year) We don't make any updates to the IDE controller. Signed-off-by: David Wang <touch@sis.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | USB: Add VIA quirk fixup for VT8235 usb2Mark Hindley2006-08-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch to add VIA PCI quirk for Enhanced/Extended USB on VT8235 southbridge. It is needed in order to use EHCI/USB 2.0 with ACPI. Without it IRQs are not routed correctly, you get an "Unlink after no-IRQ?" error and the device is unusable. I belive this could also be a fix for Bugzilla Bug 5835. Signed-off-by: Mark Hindley <mark@hindley.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | [SERIAL] Support for Intashield 2 port PCI serial cardPeter Horton2006-08-271-0/+3
| |/ |/| | | | | | | | | | | | | Here is a patch that adds support for the Instashield IS-200 2 port PCI serial card. Signed-off-by: Peter Horton <pdh@colonel-panic.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | PCI: Unhide the SMBus on Asus PU-DLSJean Delvare2006-08-031-0/+1
|/ | | | | | | | | Unhide the SMBus controller on the Asus PU-DLS board. This fixes bug #6763. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PCI] Add JMicron PCI ID constantsJeff Garzik2006-07-051-0/+7
| | | | | | They will be used in several IDE/libata files. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [MMC] sdhci: Add SDHCI controller idsPierre Ossman2006-07-021-0/+2
| | | | | | | | Add ids for SDHCI controllers so that they can be identified for quirks. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] pcmcia: TI PCIxx12 CardBus controller supportAlex Williamson2006-06-301-0/+1
| | | | | | | | | The patch below adds support for the TI PCIxx12 CardBus controllers. This seems to be sufficient to detect the cardbus bridge on an HP nc6320 and works with an orinoco wifi card. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] ata: add some NVIDIA chipset IDsRandy Dunlap2006-06-261-0/+1
| | | | | | | | | | | | | | | | From: Randy Dunlap <randy.dunlap@oracle.com> Add some nVidia chipset ID's support. http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=b407680553280f9999a20706d5ab2a3be65312c1;hp=ce4cb48010ab2cca537432b5ccb47d4b1fb489e5 Snagged from lkml. Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] sata_vsc: partially revert a PCI ID-related commitJeff Garzik2006-06-261-1/+0
| | | | | | | | | | | | | Partially revert 74d0a988d3aa359b6b8a8536c8cb92cce02ca5d5: [PATCH] PCI: Move various PCI IDs to header file libata policy is to avoid use of named PCI device ID constants. These are often single-use constants, which have little value over direct numeric constants save for constant include/linux/pci_ids.h patching/merging headaches. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'master' into upstreamJeff Garzik2006-06-221-0/+28
|\ | | | | | | | | | | | | | | Conflicts: drivers/scsi/libata-core.c drivers/scsi/libata-scsi.c include/linux/pci_ids.h
| * Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds2006-06-221-0/+5
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (44 commits) [PATCH] I2C: I2C controllers go into right place on sysfs [PATCH] hwmon-vid: Add support for Intel Core and Conroe [PATCH] lm70: New hardware monitoring driver [PATCH] hwmon: Fix the Kconfig header [PATCH] i2c-i801: Merge setup function [PATCH] i2c-i801: Better pci subsystem integration [PATCH] i2c-i801: Cleanups [PATCH] i2c-i801: Remove PCI function check [PATCH] i2c-i801: Remove force_addr parameter [PATCH] i2c-i801: Fix block transaction poll loops [PATCH] scx200_acb: Documentation update [PATCH] scx200_acb: Mark scx200_acb_probe __init [PATCH] scx200_acb: Use PCI I/O resource when appropriate [PATCH] i2c: Mark block write buffers as const [PATCH] i2c-ocores: Minor cleanups [PATCH] abituguru: Fix fan detection [PATCH] abituguru: Review fixes [PATCH] abituguru: New hardware monitoring driver [PATCH] w83792d: Add missing data access locks [PATCH] w83792d: Fix setting the PWM value ...
| | * [PATCH] I2C: i2c-nforce2: Add support for the nForce4 MCP51 and MCP55Jean Delvare2006-06-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the new nForce4 MCP51 (also known as nForce 410 or 430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes were required because the base I/O address registers have changed in these versions. Standard BARs are now being used, while the original nForce2 chips used non-standard ones. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * [PATCH] i2c-piix4: Add ATI IXP200/300/400 supportRudolf Marek2006-06-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the ATI IXP southbridges support to i2c-piix4, as it turned out those chips are compatible with it. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] PCI: nVidia quirk to make AER PCI-E extended capability visibleBrice Goglin2006-06-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nVidia CK804 PCI-E chipset supports the AER extended capability but sometimes fails to link it (with some BIOS or after a warm reboot). It makes the AER cap invisible to pci_find_ext_capability(). The patch adds a quirk to set the missing bit that controls the linking of the capability. By the way, it removes the corresponding code in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Loic Prylli <loic@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] PCI: Move various PCI IDs to header fileBrent Casavant2006-06-211-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move various QLogic, Vitesse, and Intel storage controller PCI IDs to the main header file. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] PCI Bus Parity Status-broken hardware attribute, EDAC foundationDoug Thompson2006-06-211-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the EDAC (error detection and correction) modules that are in the kernel contain some features that need to be moved. After some good feedback on the PCI Parity detection code and interface (http://www.ussg.iu.edu/hypermail/linux/kernel/0603.1/0897.html) this patch ADDs an new attribute to the pci_dev structure: Namely the 'broken_parity_status' bit. When set this indicates that the respective hardware generates false positives of Parity errors. The EDAC "blacklist" solution was inferior and will be removed in a future patch. Also in this patch is a PCI quirk.c entry for an Infiniband PCI-X card which generates false positive parity errors. I am requesting comments on this AND on the possibility of a exposing this 'broken_parity_status' bit to userland via the PCI device sysfs directory for devices. This access would allow for enabling of this feature on new devices and for old devices that have their drivers updated. (SLES 9 SP3 did this on an ATI motherboard video device). There is a need to update such a PCI attribute between kernel releases. This patch just adds a storage place for the attribute and a quirk entry for a known bad PCI device. PCI Parity reaper/harvestor operations are in EDAC itself and will be refactored to use this PCI attribute instead of its own mechanisms (which are currently disabled) in the future. Signed-off-by: Doug Thompson <norsk5@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-06-191-0/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits) [ETHTOOL]: Fix UFO typo [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer. [SCTP]: Send only 1 window update SACK per message. [SCTP]: Don't do CRC32C checksum over loopback. [SCTP] Reset rtt_in_progress for the chunk when processing its sack. [SCTP]: Reject sctp packets with broadcast addresses. [SCTP]: Limit association max_retrans setting in setsockopt. [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate. [IPV6]: Sum real space for RTAs. [IRDA]: Use put_unaligned() in irlmp_do_discovery(). [BRIDGE]: Add support for NETIF_F_HW_CSUM devices [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM [TG3]: Convert to non-LLTX [TG3]: Remove unnecessary tx_lock [TCP]: Add tcp_slow_start_after_idle sysctl. [BNX2]: Update version and reldate [BNX2]: Use CPU native page size [BNX2]: Use compressed firmware [BNX2]: Add firmware decompression [BNX2]: Allow WoL settings on new 5708 chips ... Manual fixup for conflict in drivers/net/tulip/winbond-840.c
| | * [TG3]: Add 5786 PCI IDMichael Chan2006-06-171-0/+1
| | | | | | | | | | | | | | | | | | | | | Add PCI ID for BCM5786 which is a variant of 5787. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * [I/OAT]: Move PCI_DEVICE_ID_INTEL_IOAT to linux/pci_ids.hDavid S. Miller2006-06-171-0/+1
| | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'master' into upstreamJeff Garzik2006-06-081-0/+1
| |\ \ | | |/
| * | [PATCH] pci_ids: add new device idsAyaz Abdulla2006-05-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds new device ids for MCP61 and MCP65 chips. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | [PATCH] Add Myri-10G Ethernet driverBrice Goglin2006-05-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew J. Gallatin <gallatin@myri.com> drivers/net/Kconfig | 17 drivers/net/Makefile | 1 drivers/net/myri10ge/Makefile | 5 drivers/net/myri10ge/myri10ge.c | 2851 +++++++++++++++ drivers/net/myri10ge/myri10ge_mcp.h | 205 + drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 58 include/linux/pci_ids.h | 1 7 files changed, 3138 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | Merge branch 'master'Jeff Garzik2006-04-201-0/+4
| |\ \
| * \ \ Merge branch 'master'Jeff Garzik2006-04-141-1/+2
| |\ \ \
| * | | | [PATCH] Goramo PCI200SYN WAN driver subsystem ID patchKrzysztof Halasa2006-04-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Goramo finally got PCI subsystem ID for their PCI200SYN card. The attached patch adds support for it - cards with old EEPROM data will emit a warning with URL for update tool. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | | Merge branch 'upstream-fixes' into upstreamJeff Garzik2006-06-111-0/+1
|\ \ \ \ \ | | |_|_|/ | |/| | | | | | | | | | | | | | | | | | Conflicts: drivers/scsi/sata_sil24.c
| * | | | [AGPGART] VIA PT880 Ultra support.Magnus Kessler2006-05-221-0/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables agpgart on a Via "PT880 Ultra" based motherboard (Asus P4V800D-X). The PCI ID of the PT880 Ultra is 0x0308 instead of 0x0258 of the PT880. The patched via-agp passes testgart. Signed-off-by: Magnus Kessler <Magnus.Kessler@gmx.net> Signed-off-by: Dave Jones <davej@redhat.com>
* | | | [PATCH] PCI identifiers for the pata_via updateAlan Cox2006-05-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These IDs are also used by the drivers/ide/pci changes submitted by VIA. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | [PATCH] sata_nv: Add MCP61 supportAndrew Chew2006-05-241-0/+4
|/ / / | | | | | | | | | | | | | | | Added MCP61 SATA support to sata_nv. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [PATCH] ide: ATI SB600 IDE supportAnatoli Antonovitch2006-04-191-0/+4
| |/ |/| | | | | | | | | | | | | | | | | | | Add support for the IDE device on ATI SB600 Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] pci_ids.h: correct naming of 1022:7450 (AMD 8131 Bridge)John W. Linville2006-04-141-1/+2
|/ | | | | | | | | | | | | | | | The naming of the constant defined for PCI ID 1022:7450 does not seem to match the information at http://pciids.sourceforge.net/: http://pci-ids.ucw.cz/iii/?i=1022 There 1022:7450 is listed as "AMD-8131 PCI-X Bridge" while 1022:7451 is listed as "AMD-8131 PCI-X IOAPIC". Yet, the current definition for 0x7450 is PCI_DEVICE_ID_AMD_8131_APIC. It seems to me like that name should map to 0x7451, while a name like PCI_DEVICE_ID_AMD_8131_BRIDGE should map to 0x7450. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge ../linux-2.6Paul Mackerras2006-03-291-0/+2
|\
| * [PATCH] Small fixes backported to old IDE SiS driverAlan Cox2006-03-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some quick backport bits from the libata PATA work to fix things found in the sis driver. The piix driver needs some fixes too but those are way to large and need someone working on old IDE with time to do them. This patch fixes the case where random bits get loaded into SIS timing registers according to the description of the correct behaviour from Vojtech Pavlik. It also adds the SiS5517 ATA16 chipset which is not currently supported by the driver. Thanks to Conrad Harriss for loaning me the machine with the 5517 chipset. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] Add ID for Quadro NVS280Pavel Roskin2006-03-271-0/+1
| | | | | | | | | | | | | | | | | | | | Quadro NVS280 is a dual-head PCIe card with PCI ID 10de:00fd and subsystem ID 10de:0215. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] ppc32: Adds support for the PCI hostbridge in MPC5200BSylvain Munaut2006-03-271-0/+1
|/ | | | | | | | ppc32: Adds support for the PCI hostbridge in MPC5200B Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] Secure Digital Host Controller id and regsPierre Ossman2006-03-241-0/+1
| | | | | | | | | | Class code and register definitions for the Secure Digital Host Controller standard. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds2006-03-231-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (36 commits) [PATCH] hwmon: add required idr locking [PATCH] I2C: hwmon: Rename register parameters [PATCH] I2C: Drop unneeded i2c-dev.h includes [PATCH] I2C: i2c-ixp4xx: Add hwmon class [PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support [PATCH] I2C: i2c-amd756-s4882: Improve static mutex initialization [PATCH] I2C: i2c-ali1535: Drop redundant mutex [PATCH] i2c: Cleanup isp1301_omap [PATCH] i2c: Fix i2c-ite name initialization [PATCH] i2c: Drop the i2c-frodo bus driver [PATCH] i2c: Optimize core_lists mutex usage [PATCH] w83781d: Don't reset the chip by default [PATCH] w83781d: Document the alarm and beep bits [PATCH] w83627ehf: Refactor the sysfs interface [PATCH] hwmon: Support the Pentium M VID code [PATCH] hwmon: Add support for the Winbond W83687THF [PATCH] hwmon: f71805f semaphore to mutex conversions [PATCH] hwmon: Semaphore to mutex conversions [PATCH] i2c: Semaphore to mutex conversions, part 3 [PATCH] i2c: Semaphore to mutex conversions, part 2 ...
| * [PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 supportMartin Devera2006-03-231-0/+1
| | | | | | | | | | | | | | | | | | | | Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Note that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3 and standard values like 0 or 9 causes hangup. Signed-off-by: Martin Devera <devik@cdi.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [TG3]: Add 5755 supportMichael Chan2006-03-231-0/+2
|/ | | | | | | Add support for new chip 5755 which is very similar to 5787. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge ../linux-2.6James Bottomley2006-03-211-0/+7
|\
OpenPOWER on IntegriCloud