summaryrefslogtreecommitdiffstats
path: root/include/linux/netdevice.h
Commit message (Collapse)AuthorAgeFilesLines
* net: Fix disjunct computation of netdev featuresHerbert Xu2008-10-231-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | My change commit e2a6b85247aacc52d6ba0d9b37a99b8d1a3e0d83 net: Enable TSO if supported by at least one device didn't do what was intended because the netdev_compute_features function was designed for conjunctions. So what happened was that it would simply take the TSO status of the last constituent device. This patch extends it to support both conjunctions and disjunctions under the new name of netdev_increment_features. It also adds a new function netdev_fix_features which does the sanity checking that usually occurs upon registration. This ensures that the computation doesn't result in an illegal combination since this checking is absent when the change is initiated via ethtool. The two users of netdev_compute_features have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Rationalise email address: Network Specific PartsAlan Cox2008-10-131-1/+1
| | | | | | | | | | Clean up the various different email addresses of mine listed in the code to a single current and valid address. As Dave says his network merges for 2.6.28 are now done this seems a good point to send them in where they won't risk disrupting real changes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dsa: add support for Trailer tagging formatLennert Buytenhek2008-10-081-0/+10
| | | | | | | | | | | | This adds support for the Trailer switch tagging format. This is another tagging that doesn't explicitly mark tagged packets with a distinct ethertype, so that we need to add a similar hack in the receive path as for the Original DSA tagging format. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dsa: add support for original DSA tagging formatLennert Buytenhek2008-10-081-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | Most of the DSA switches currently in the field do not support the Ethertype DSA tagging format that one of the previous patches added support for, but only the original DSA tagging format. The original DSA tagging format carries the same information as the Ethertype DSA tagging format, but with the difference that it does not have an ethertype field. In other words, when receiving a packet that is tagged with an original DSA tag, there is no way of telling in eth_type_trans() that this packet is in fact a DSA-tagged packet. This patch adds a hook into eth_type_trans() which is only compiled in if support for a switch chip that doesn't support Ethertype DSA is selected, and which checks whether there is a DSA switch driver instance attached to this network device which uses the old tag format. If so, it sets the protocol field to ETH_P_DSA without looking at the packet, so that the packet ends up in the right place. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Distributed Switch Architecture protocol supportLennert Buytenhek2008-10-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: use const for some name functionsStephen Hemminger2008-09-301-2/+2
| | | | | | | | | dev_change_name and netdev_drivername should use const char on parameters that are read-only input values. The strcpy to newname is not needed since newname is not used later in function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: network device name ifalias supportStephen Hemminger2008-09-221-0/+3
| | | | | | | | | | | | | | | | | | This patch add support for keeping an additional character alias associated with an network interface. This is useful for maintaining the SNMP ifAlias value which is a user defined value. Routers use this to hold information like which circuit or line it is connected to. It is just an arbitrary text label on the network device. There are two exposed interfaces with this patch, the value can be read/written either via netlink or sysfs. This could be maintained just by the snmp daemon, but it is more generally useful for other management tools, and the kernel is good place to act as an agreed upon interface to store it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Kill plain NET_XMIT_BYPASS.David S. Miller2008-08-041-3/+0
| | | | | | | | | | | dst_input() was doing something completely absurd, looping on skb->dst->input() if NET_XMIT_BYPASS was seen, but these functions never return such an error. And as a result plain ole' NET_XMIT_BYPASS has no more references and can be completely killed off. Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: Add qdisc __NET_XMIT_STOLEN flagJarek Poplawski2008-08-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patrick McHardy <kaber@trash.net> noticed: "The other problem that affects all qdiscs supporting actions is TC_ACT_QUEUED/TC_ACT_STOLEN getting mapped to NET_XMIT_SUCCESS even though the packet is not queued, corrupting upper qdiscs' qlen counters." and later explained: "The reason why it translates it at all seems to be to not increase the drops counter. Within a single qdisc this could be avoided by other means easily, upper qdiscs would still increase the counter when we return anything besides NET_XMIT_SUCCESS though. This means we need a new NET_XMIT return value to indicate this to the upper qdiscs. So I'd suggest to introduce NET_XMIT_STOLEN, return that to upper qdiscs and translate it to NET_XMIT_SUCCESS in dev_queue_xmit, similar to NET_XMIT_BYPASS." David Miller <davem@davemloft.net> noticed: "Maybe these NET_XMIT_* values being passed around should be a set of bits. They could be composed of base meanings, combined with specific attributes. So you could say "NET_XMIT_DROP | __NET_XMIT_NO_DROP_COUNT" The attributes get masked out by the top-level ->enqueue() caller, such that the base meanings are the only thing that make their way up into the stack. If it's only about communication within the qdisc tree, let's simply code it that way." This patch is trying to realize these ideas. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Fix lockdep warnings in multiqueue configurations.David S. Miller2008-07-311-31/+55
| | | | | | | | | | | | | | When support for multiple TX queues were added, the netif_tx_lock() routines we converted to iterate over all TX queues and grab each queue's spinlock. This causes heartburn for lockdep and it's not a healthy thing to do with lots of TX queues anyways. So modify this to use a top-level lock and a "frozen" state for the individual TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix build failure with 'make mandocs'.Dave Jones2008-07-221-29/+29
| | | | | | | | | | | | | | | | | The function header comments have to go with the functions they are documenting, or things go horribly wrong when we try to process them with the docbook tools. Warning(include/linux/netdevice.h:1006): No description found for parameter 'dev_queue' Warning(include/linux/netdevice.h:1033): No description found for parameter 'dev_queue' Warning(include/linux/netdevice.h:1067): No description found for parameter 'dev_queue' Warning(include/linux/netdevice.h:1093): No description found for parameter 'dev_queue' Warning(include/linux/netdevice.h:1474): No description found for parameter 'txq' Error(net/core/dev.c:1674): cannot understand prototype: 'u32 simple_tx_hashrnd; ' Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Print the module name as part of the watchdog messageArjan van de Ven2008-07-211-0/+2
| | | | | | | | | | | As suggested by Dave: This patch adds a function to get the driver name from a struct net_device, and consequently uses this in the watchdog timeout handler to print as part of the message. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* pkt_sched: Manage qdisc list inside of root qdisc.David S. Miller2008-07-181-2/+0
| | | | | | | | | | | | | | | | | Idea is from Patrick McHardy. Instead of managing the list of qdiscs on the device level, manage it in the root qdisc of a netdev_queue. This solves all kinds of visibility issues during qdisc destruction. The way to iterate over all qdiscs of a netdev_queue is to visit the netdev_queue->qdisc, and then traverse it's list. The only special case is to ignore builting qdiscs at the root when dumping or doing a qdisc_lookup(). That was not needed previously because builtin qdiscs were not added to the device's qdisc_list. Signed-off-by: David S. Miller <davem@davemloft.net>
* pkt_sched: Kill netdev_queue lock.David S. Miller2008-07-171-1/+0
| | | | | | | We can simply use the qdisc->q.lock for all of the qdisc tree synchronization. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdevice: Move qdisc_list back into net_device proper.David S. Miller2008-07-171-1/+2
| | | | | | And give it it's own lock. Signed-off-by: David S. Miller <davem@davemloft.net>
* pkt_sched: Schedule qdiscs instead of netdev_queue.David S. Miller2008-07-171-7/+5
| | | | | | | | | | | | | | When we have shared qdiscs, packets come out of the qdiscs for multiple transmit queues. Therefore it doesn't make any sense to schedule the transmit queue when logically we cannot know ahead of time the TX queue of the SKB that the qdisc->dequeue() will give us. Just for sanity I added a BUG check to make sure we never get into a state where the noop_qdisc is scheduled. Signed-off-by: David S. Miller <davem@davemloft.net>
* pkt_sched: Make QDISC_RUNNING a qdisc state.David S. Miller2008-07-171-1/+0
| | | | | | | Currently it is associated with a netdev_queue, but when we have qdisc sharing that no longer makes any sense. Signed-off-by: David S. Miller <davem@davemloft.net>
* pkt_sched: Move gso_skb into Qdisc.David S. Miller2008-07-171-1/+0
| | | | | | | | | | We liberate any dangling gso_skb during qdisc destruction. It really only matters for the root qdisc. But when qdiscs can be shared by multiple netdev_queue objects, we can't have the gso_skb in the netdev_queue any more. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Kill plain netif_schedule()David S. Miller2008-07-171-5/+0
| | | | | | No more users. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Add netdev->select_queue() method.David S. Miller2008-07-171-0/+3
| | | | | | | | | | | | | | Devices or device layers can set this to control the queue selection performed by dev_pick_tx(). This function runs under RCU protection, which allows overriding functions to have some way of synchronizing with things like dynamic ->real_num_tx_queues adjustments. This makes the spinlock prefetch in dev_queue_xmit() a little bit less effective, but that's the price right now for correctness. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: netdev_priv() can now be sane again.David S. Miller2008-07-171-1/+3
| | | | | | | | | | The private area of a netdev is now at a fixed offset once more. Unfortunately, some assumptions that netdev_priv() == netdev->priv crept back into the tree. In particular this happened in the loopback driver. Make it use netdev->ml_priv. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Kill struct net_device_subqueue and netdev->egress_subqueue*David S. Miller2008-07-171-12/+0
| | | | | | No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Use queue aware tests throughout.David S. Miller2008-07-171-9/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This effectively "flips the switch" by making the core networking and multiqueue-aware drivers use the new TX multiqueue structures. Non-multiqueue drivers need no changes. The interfaces they use such as netif_stop_queue() degenerate into an operation on TX queue zero. So everything "just works" for them. Code that really wants to do "X" to all TX queues now invokes a routine that does so, such as netif_tx_wake_all_queues(), netif_tx_stop_all_queues(), etc. pktgen and netpoll required a little bit more surgery than the others. In particular the pktgen changes, whilst functional, could be largely improved. The initial check in pktgen_xmit() will sometimes check the wrong queue, which is mostly harmless. The thing to do is probably to invoke fill_packet() earlier. The bulk of the netpoll changes is to make the code operate solely on the TX queue indicated by by the SKB queue mapping. Setting of the SKB queue mapping is entirely confined inside of net/core/dev.c:dev_pick_tx(). If we end up needing any kind of special semantics (drops, for example) it will be implemented here. Finally, we now have a "real_num_tx_queues" which is where the driver indicates how many TX queues are actually active. With IGB changes from Jeff Kirsher. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Kill NETIF_F_MULTI_QUEUE.David S. Miller2008-07-171-3/+1
| | | | | | | There is no need for a feature bit for something that can be tested by simply checking the TX queue count. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Allocate multiple queues for TX.David S. Miller2008-07-171-23/+46
| | | | | | | | | | | | | | | | alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Add netdev->addr_list_lock protection.David S. Miller2008-07-151-0/+20
| | | | | | | | | | | | | Add netif_addr_{lock,unlock}{,_bh}() helpers. Use them to protect operations that operate on or read the network device unicast and multicast address lists. Also use them in cases where the code simply wants to block calls into the driver's ->set_rx_mode() and ->set_multicast_list() methods. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Add addr_list_lock to struct net_device.David S. Miller2008-07-151-0/+1
| | | | | | | | This will be used to protect the per-device unicast and multicast address lists, as well as the callbacks into the drivers which configure such state such as ->set_rx_mode() and ->set_multicast_list(). Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: deliver packets received with VLAN acceleration to network tapsPatrick McHardy2008-07-141-0/+1
| | | | | | | | | | | | | | When VLAN header stripping is used, packets currently bypass packet sockets (and other network taps) completely. For locally existing VLANs, they appear directly on the VLAN device, for unknown VLANs they are silently dropped. Add a new function netif_nit_deliver() to deliver incoming packets to all network interface taps and use it in __vlan_hwaccel_rx() to make VLAN packets visible on the underlying device. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add netif_napi_del function to allow for removal of napistructsAlexander Duyck2008-07-111-0/+13
| | | | | | | | | | | | | Adds netif_napi_del function which is used to remove the napi struct from the netdev napi_list in cases where CONFIG_NETPOLL was enabled. The motivation for adding this is to handle the case in which the number of queues on a device changes due to a configuration change. Previously the napi structs for each queue would be left in the list until the netdev was freed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* netdev: Move atomic queue state bits into netdev_queue.David S. Miller2008-07-081-16/+39
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller2008-07-081-14/+0
| | | | | | Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue.David S. Miller2008-07-081-23/+39
| | | | | | | Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Make netif_schedule() routines work with netdev_queue objects.David S. Miller2008-07-081-5/+12
| | | | | | | | | | Only plain netif_schedule() remains taking a net_device, mostly as a compatability item while we transition the rest of these interfaces. Everything else calls netif_schedule_queue() or __netif_schedule(), both of which take a netdev_queue pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Move gso_skb into netdev_queue.David S. Miller2008-07-081-3/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Move next_sched into struct netdev_queue.David S. Miller2008-07-081-3/+2
| | | | | | We schedule queues, not the device, for output queue processing in BH. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Kill qdisc_ingress, use netdev->rx_queue.qdisc instead.David S. Miller2008-07-081-3/+0
| | | | | | | | Now that our qdisc management is bi-directional, per-queue, and fully orthogonal, there is no reason to have a special ingress qdisc pointer in struct net_device. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Move rest of qdisc state into struct netdev_queueDavid S. Miller2008-07-081-7/+3
| | | | | | Now qdisc, qdisc_sleeping, and qdisc_list also live there. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: The ingress_lock member is no longer needed.David S. Miller2008-07-081-2/+0
| | | | | | | | Every qdisc is assosciated with a queue, and in the case of ingress qdiscs that will now be netdev->rx_queue so using that queue's lock is the thing to do. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Move queue_lock into struct netdev_queue.David S. Miller2008-07-081-2/+2
| | | | | | | | | | | | The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Create netdev_queue abstraction.David S. Miller2008-07-081-0/+7
| | | | | | | | | | | | | | | | | | | A netdev_queue is an entity managed by a qdisc. Currently there is one RX and one TX queue, and a netdev_queue merely contains a backpointer to the net_device. The Qdisc struct is augmented with a netdev_queue pointer as well. Eventually the 'dev' Qdisc member will go away and we will have the resulting hierarchy: net_device --> netdev_queue --> Qdisc Also, qdisc_alloc() and qdisc_create_dflt() now take a netdev_queue pointer argument. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add GARP applicant-only participantPatrick McHardy2008-07-051-0/+2
| | | | | | | | | Add an implementation of the GARP (Generic Attribute Registration Protocol) applicant-only participant. This will be used by the following patch to add GVRP support to the VLAN code. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-06-281-0/+4
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl4965-base.c
| * include/linux/netdevice.h: don't export MAX_HEADER to userspaceAdrian Bunk2008-06-271-0/+4
| | | | | | | | | | | | | | Due to the CONFIG_'s the value is anyway not correct in userspace. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Disable LRO on devices that are forwardingBen Hutchings2008-06-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Large Receive Offload (LRO) is only appropriate for packets that are destined for the host, and should be disabled if received packets may be forwarded. It can also confuse the GSO on output. Add dev_disable_lro() function which uses the appropriate ethtool ops to disable LRO if enabled. Add calls to dev_disable_lro() in br_add_if() and functions that enable IPv4 and IPv6 forwarding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevice: Fix promiscuity and allmulti overflowWang Chen2008-06-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Max of promiscuity and allmulti plus positive @inc can cause overflow. Fox example: when allmulti=0xFFFFFFFF, any caller give dev_set_allmulti() a positive @inc will cause allmulti be off. This is not what we want, though it's rare case. The fix is that only negative @inc will cause allmulti or promiscuity be off and when any caller makes the counters touch the roof, we return error. Change of v2: Change void function dev_set_promiscuity/allmulti to return int. So callers can get the overflow error. Caller's fix will be done later. Change of v3: 1. Since we return error to caller, we don't need to print KERN_ERROR, KERN_WARNING is enough. 2. In dev_set_promiscuity(), if __dev_set_promiscuity() failed, we return at once. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'davem-next' of ↵David S. Miller2008-06-171-0/+4
|\ \ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| * | bonding: Allow setting max_bonds to zeroJay Vosburgh2008-06-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Permit bonding to function rationally if max_bonds is set to zero. This will load the module, but create no master devices (which can be created via sysfs). Requires some change to bond_create_sysfs; currently, the netdev sysfs directory is determined from the first bonding device created, but this is no longer possible. Instead, an interface from net/core is created to create and destroy files in net_class. Based on a patch submitted by Phil Oester <kernel@linuxaces.com>. Modified by Jay Vosburgh to fix the sysfs issue mentioned above and to update the documentation. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | net/core: add NETDEV_BONDING_FAILOVER eventOr Gerlitz2008-06-171-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Add NETDEV_BONDING_FAILOVER event to be used in a successive patch by bonding to announce fail-over for the active-backup mode through the netdev events notifier chain mechanism. Such an event can be of use for the RDMA CM (communication manager) to let native RDMA ULPs (eg NFS-RDMA, iSER) always be aligned with the IP stack, in the sense that they use the same ports/links as the stack does. More usages can be done to allow monitoring tools based on netlink events being aware to bonding fail-over. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | netdevice: change net_device->promiscuity/allmulti to unsigned intWang Chen2008-06-171-2/+2
|/ | | | | | | | | The comments of dev_set_allmulti/promiscuity() is that "While the count in the device remains above zero...". So negative count is useless. Fix the type of the counter from "int" to "unsigned int". Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Use bitmask of feature flags instead of seperate feature bitsPatrick McHardy2008-05-231-4/+5
| | | | | | | | | | | Herbert Xu points out that the use of seperate feature bits for features to be propagated to VLAN devices is going to get messy real soon. Replace the VLAN feature bits by a bitmask of feature flags to be propagated and restore the old GSO_SHIFT/MASK values. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud