summaryrefslogtreecommitdiffstats
path: root/include/linux/netdevice.h
Commit message (Collapse)AuthorAgeFilesLines
* [BRIDGE]: Disable SG/GSO if TX checksum is offHerbert Xu2006-08-171-0/+3
| | | | | | | | | | | | | When the bridge recomputes features, it does not maintain the constraint that SG/GSO must be off if TX checksum is off. This patch adds that constraint. On a completely unrelated note, I've also added TSO6 and TSO_ECN feature bits if GSO is enabled on the underlying device through the new NETIF_F_GSO_SOFTWARE macro. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [VLAN]: Make sure bonding packet drop checks get done in hwaccel RX path.David S. Miller2006-08-171-0/+24
| | | | | | | | | | | | Since __vlan_hwaccel_rx() is essentially bypassing the netif_receive_skb() call that would have occurred if we did the VLAN decapsulation in software, we are missing the skb_bond() call and the assosciated checks it does. Export those checks via an inline function, skb_bond_should_drop(), and use this in __vlan_hwaccel_rx(). Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix reversed error test in netif_tx_trylockHerbert Xu2006-07-211-3/+3
| | | | | | | | A non-zero return value indicates success from spin_trylock, not error. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] gso: Fix up GSO packets with broken checksumsHerbert Xu2006-07-081-3/+5
| | | | | | | | | | | | Certain subsystems in the stack (e.g., netfilter) can break the partial checksum on GSO packets. Until they're fixed, this patch allows this to work by recomputing the partial checksums through the GSO mechanism. Once they've all been converted to update the partial checksum instead of clearing it, this workaround can be removed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] gso: Add skb_is_gsoHerbert Xu2006-07-081-1/+1
| | | | | | | | | | This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Added GSO support for TCPv6Herbert Xu2006-06-301-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds GSO support for IPv6 and TCPv6. This is based on a patch by Ananda Raju <Ananda.Raju@neterion.com>. His original description is: This patch enables TSO over IPv6. Currently Linux network stacks restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from "dev->features". This patch will remove this restriction. This patch will introduce a new flag NETIF_F_TSO6 which will be used to check whether device supports TSO over IPv6. If device support TSO over IPv6 then we don't clear of NETIF_F_TSO and which will make the TCP layer to create TSO packets. Any device supporting TSO over IPv6 will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO. In case when user disables TSO using ethtool, NETIF_F_TSO will get cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't get TSO packets created by TCP layer. SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet. SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature. UFO is supported over IPv6 also The following table shows there is significant improvement in throughput with normal frames and CPU usage for both normal and jumbo. -------------------------------------------------- | | 1500 | 9600 | | ------------------|-------------------| | | thru CPU | thru CPU | -------------------------------------------------- | TSO OFF | 2.00 5.5% id | 5.66 20.0% id | -------------------------------------------------- | TSO ON | 2.63 78.0 id | 5.67 39.0% id | -------------------------------------------------- Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Generalise TSO-specific bits from skb_setup_capsHerbert Xu2006-06-301-3/+9
| | | | | | | | | | | | | | This patch generalises the TSO-specific bits from sk_setup_caps by adding the sk_gso_type member to struct sock. This makes sk_setup_caps generic so that it can be used by TCPv6 or UFO. The only catch is that whoever uses this must provide a GSO implementation for their protocol which I think is a fair deal :) For now UFO continues to live without a GSO implementation which is OK since it doesn't use the sock caps field at the moment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Add ECN support for TSOMichael Chan2006-06-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In the current TSO implementation, NETIF_F_TSO and ECN cannot be turned on together in a TCP connection. The problem is that most hardware that supports TSO does not handle CWR correctly if it is set in the TSO packet. Correct handling requires CWR to be set in the first packet only if it is set in the TSO header. This patch adds the ability to turn on NETIF_F_TSO and ECN using GSO if necessary to handle TSO packets with CWR set. Hardware that handles CWR correctly can turn on NETIF_F_TSO_ECN in the dev-> features flag. All TSO packets with CWR set will have the SKB_GSO_TCPV4_ECN set. If the output device does not have the NETIF_F_TSO_ECN feature set, GSO will split the packet up correctly with CWR only set in the first segment. With help from Herbert Xu <herbert@gondor.apana.org.au>. Since ECN can always be enabled with TSO, the SOCK_NO_LARGESEND sock flag is completely removed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix logical error in skb_gso_okHerbert Xu2006-06-291-2/+2
| | | | | | | | | The test in skb_gso_ok is backwards. Noticed by Michael Chan <mchan@broadcom.com>. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Added GSO header verificationHerbert Xu2006-06-291-5/+12
| | | | | | | | | | | | | | | | | | | | | | When GSO packets come from an untrusted source (e.g., a Xen guest domain), we need to verify the header integrity before passing it to the hardware. Since the first step in GSO is to verify the header, we can reuse that code by adding a new bit to gso_type: SKB_GSO_DODGY. Packets with this bit set can only be fed directly to devices with the corresponding bit NETIF_F_GSO_ROBUST. If the device doesn't have that bit, then the skb is fed to the GSO engine which will allow the packet to be sent to the hardware if it passes the header check. This patch changes the sg flag to a full features flag. The same method can be used to implement TSO ECN support. We simply have to mark packets with CWR set with SKB_GSO_ECN so that only hardware with a corresponding NETIF_F_TSO_ECN can accept them. The GSO engine can either fully segment the packet, or segment the first MTU and pass the rest to the hardware for further segmentation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: make net/core/dev.c:netdev_nit staticAdrian Bunk2006-06-251-1/+0
| | | | | | | netdev_nit can now become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Added GSO toggleHerbert Xu2006-06-231-0/+1
| | | | | | | | This patch adds a generic segmentation offload toggle that can be turned on/off for each net device. For now it only supports in TCPv4. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Add generic segmentation offloadHerbert Xu2006-06-231-1/+7
| | | | | | | | | | | | | This patch adds the infrastructure for generic segmentation offload. The idea is to tap into the potential savings of TSO without hardware support by postponing the allocation of segmented skb's until just before the entry point into the NIC driver. The same structure can be used to support software IPv6 TSO, as well as UFO and segmentation offload for other relevant protocols, e.g., DCCP. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Merge TSO/UFO fields in sk_buffHerbert Xu2006-06-231-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-06-201-0/+1
|\ | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ATM]: fix broken uses of NIPQUAD in net/atm [SCTP]: sctp_unpack_cookie() fix [SCTP]: Fix unintentional change to SCTP_ASSERT when !SCTP_DEBUG [NET]: Prevent multiple qdisc runs [CONNECTOR]: Initialize subsystem earlier. [NETFILTER]: xt_sctp: fix endless loop caused by 0 chunk length
| * [NET]: Prevent multiple qdisc runsHerbert Xu2006-06-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having two or more qdisc_run's contend against each other is bad because it can induce packet reordering if the packets have to be requeued. It appears that this is an unintended consequence of relinquinshing the queue lock while transmitting. That in turn is needed for devices that spend a lot of time in their transmit routine. There are no advantages to be had as devices with queues are inherently single-threaded (the loopback device is not but then it doesn't have a queue). Even if you were to add a queue to a parallel virtual device (e.g., bolt a tbf filter in front of an ipip tunnel device), you would still want to process the queue in sequence to ensure that the packets are ordered correctly. The solution here is to steal a bit from net_device to prevent this. BTW, as qdisc_restart is no longer used by anyone as a module inside the kernel (IIRC it used to with netif_wake_queue), I have not exported the new __qdisc_run function. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.infradead.org/hdrcleanup-2.6Linus Torvalds2006-06-201-1/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/hdrcleanup-2.6: (63 commits) [S390] __FD_foo definitions. Switch to __s32 types in joystick.h instead of C99 types for consistency. Add <sys/types.h> to headers included for userspace in <linux/input.h> Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h Remove struct fddi_statistics from user view in <linux/if_fddi.h> Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390 Revert include/media changes: Mauro says those ioctls are only used in-kernel(!) Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h> Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too Remove private struct dx_hash_info from public view in <linux/ext3_fs.h> Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h> Use __uXX types in <linux/divert.h> for struct divert_blk et al. Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible. Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely Use __uXX types in user-visible structures in <linux/nbd.h> Don't use 'u32' in user-visible struct ip_conntrack_old_tuple. Use __uXX types for S390 DASD volume label definitions which are user-visible S390 BIODASDREADCMB ioctl should use __u64 not u64 type. Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h> Fix private integer types used in V4L2 ioctls. ... Manually resolve conflict in include/linux/mtd/physmap.h
| * Merge branch 'master' of ↵David Woodhouse2006-05-241-12/+11
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-powerpc/unistd.h include/asm-sparc/unistd.h include/asm-sparc64/unistd.h Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6David Woodhouse2006-04-291-8/+10
| |\ \
| * | | Don't include linux/config.h from anywhere else in include/David Woodhouse2006-04-261-1/+0
| | | | | | | | | | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | | | [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUMHerbert Xu2006-06-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current stack treats NETIF_F_HW_CSUM and NETIF_F_NO_CSUM identically so we test for them in quite a few places. For the sake of brevity, I'm adding the macro NETIF_F_GEN_CSUM for these two. We also test the disjunct of NETIF_F_IP_CSUM and the other two in various places, for that purpose I've added NETIF_F_ALL_CSUM. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | [NET]: Add netif_tx_lockHerbert Xu2006-06-171-3/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | [I/OAT]: Setup the networking subsystem as a DMA clientChris Leech2006-06-171-0/+4
| |_|/ |/| | | | | | | | | | | | | | | | | Attempts to allocate per-CPU DMA channels Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | [NET]: Do sysfs registration as part of register_netdevice.Stephen Hemminger2006-05-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The last step of netdevice registration was being done by a delayed call, but because it was delayed, it was impossible to return any error code if the class_device registration failed. Side effects: * one state in registration process is unnecessary. * register_netdevice can sleep inside class_device registration/hotplug * code in netdev_run_todo only does unregistration so it is simpler. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | sky2: backout NAPI rescheduleStephen Hemminger2006-05-081-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backout of earlier patch. The whole rescheduling hack was a bad idea. It doesn't really solve the problem and it makes the code more complicated for no good reason. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* | | [NET]: Create netdev attribute_groups with class_device_addStephen Hemminger2006-05-061-0/+2
| |/ |/| | | | | | | | | | | | | | | | | Atomically create attributes when class device is added. This avoids the race between registering class_device (which generates hotplug event), and the creation of attribute groups. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] sky2: reschedule if irq still pendingStephen Hemminger2006-04-261-8/+10
|/ | | | | | | | | | | | This is a workaround for the case edge-triggered irq's. Several users seem to have broken configurations sharing edge-triggered irq's. To avoid losing IRQ's, reshedule if more work arrives. The changes to netdevice.h are to extract the part that puts device back in list into separate inline. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET]: Deinline some larger functions from netdevice.hDenis Vlasenko2006-03-291-50/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: dev_put/dev_hold cleanupStephen Hemminger2006-03-201-2/+4
| | | | | | | | | Get rid of the old __dev_put macro that is just a hold over from pre 2.6 kernel. And turn dev_hold into an inline instead of a macro. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] core: add RFC2863 operstateStefan Rompf2006-03-201-2/+33
| | | | | | | | | | | | | | | | | this patch adds a dormant flag to network devices, RFC2863 operstate derived from these flags and possibility for userspace interaction. It allows drivers to signal that a device is unusable for user traffic without disabling queueing (and therefore the possibility for protocol establishment traffic to flow) and a userspace supplicant (WPA, 802.1X) to mark a device unusable without changes to the driver. It is the result of our long discussion. However I must admit that it represents what Jamal and I agreed on with compromises towards Krzysztof, but Thomas and Krzysztof still disagree with some parts. Anyway I think it should be applied. Signed-off-by: Stefan Rompf <stefan@loplof.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] sky2: change netif_rx_schedule_test to __netif_schedule_prepshemminger@osdl.org2005-12-011-4/+4
| | | | | | | | I didn't like the name netif_rx_schedule_test(), in earlier patches and changed to __netif_rx_schedule_prep to be more consistent. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* Merge branch 'bonding-sysfs' of git://git.tuxdriver.com/git/netdev-jwlJeff Garzik2005-11-151-0/+1
|\
| * [PATCH] net: make dev_valid_name publicMitch Williams2005-11-131-0/+1
| | | | | | | | | | | | | | | | dev_valid_name() is a useful function. Make it public. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master'Jeff Garzik2005-11-111-0/+7
|\ \ | |/
| * [NET]: Detect hardware rx checksum faults correctlyHerbert Xu2005-11-101-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here is the patch that introduces the generic skb_checksum_complete which also checks for hardware RX checksum faults. If that happens, it'll call netdev_rx_csum_fault which currently prints out a stack trace with the device name. In future it can turn off RX checksum. I've converted every spot under net/ that does RX checksum checks to use skb_checksum_complete or __skb_checksum_complete with the exceptions of: * Those places where checksums are done bit by bit. These will call netdev_rx_csum_fault directly. * The following have not been completely checked/converted: ipmr ip_vs netfilter dccp This patch is based on patches and suggestions from Stephen Hemminger and David S. Miller. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master'Jeff Garzik2005-11-051-0/+1
|\ \ | |/
| * [IPv4/IPv6]: UFO Scatter-gather approachAnanda Raju2005-10-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attached is kernel patch for UDP Fragmentation Offload (UFO) feature. 1. This patch incorporate the review comments by Jeff Garzik. 2. Renamed USO as UFO (UDP Fragmentation Offload) 3. udp sendfile support with UFO This patches uses scatter-gather feature of skb to generate large UDP datagram. Below is a "how-to" on changes required in network device driver to use the UFO interface. UDP Fragmentation Offload (UFO) Interface: ------------------------------------------- UFO is a feature wherein the Linux kernel network stack will offload the IP fragmentation functionality of large UDP datagram to hardware. This will reduce the overhead of stack in fragmenting the large UDP datagram to MTU sized packets 1) Drivers indicate their capability of UFO using dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG NETIF_F_HW_CSUM is required for UFO over ipv6. 2) UFO packet will be submitted for transmission using driver xmit routine. UFO packet will have a non-zero value for "skb_shinfo(skb)->ufo_size" skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP fragment going out of the adapter after IP fragmentation by hardware. skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[] contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW indicating that hardware has to do checksum calculation. Hardware should compute the UDP checksum of complete datagram and also ip header checksum of each fragmented IP packet. For IPV6 the UFO provides the fragment identification-id in skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating IPv6 fragments. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (forwarded) Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
* | Merge branch 'master'Jeff Garzik2005-10-281-38/+57
|\ \ | |/
| * Merge branch 'upstream-fixes'Jeff Garzik2005-10-031-34/+55
| |\
| | * [NET]: Reorder some hot fields of struct net_deviceEric Dumazet2005-09-271-34/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Place them on separate cache lines in SMP to lower memory bouncing between multiple CPU accessing the device. - One part is mostly used on receive path (including eth_type_trans()) (poll_list, poll, quota, weight, last_rx, dev_addr, broadcast) - One part is mostly used on queue transmit path (qdisc) (queue_lock, qdisc, qdisc_sleeping, qdisc_list, tx_queue_len) - One part is mostly used on xmit path (device) (xmit_lock, xmit_lock_owner, priv, hard_start_xmit, trans_start) 'features' is placed outside of these hot points, in a location that may be shared by all cpus (because mostly read) name_hlist is moved close to name[IFNAMSIZ] to speedup __dev_get_by_name() Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [PATCH] drivers/net: fix-up schedule_timeout() usageNishanth Aravamudan2005-09-141-4/+2
| |/ | | | | | | | | | | | | | | | | | | | | Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* | [PATCH] sky2: driver update.Stephen Hemminger2005-09-161-2/+6
|/ | | | | | | | | | | | | | | | | | | | | | | Here is revised patch against netdev sky2 branch. It includes whitespace fixes, all the changes from the previous review as well as some optimizations and timing fixes to solve some of the hangs. The stall problem is better but not perfect. It appears that under stress the chip can't keep up with the bus and sends a pause frame, then hangs. This version is for testing, and hopefully other eyes might see the root cause of the problem. I don't want to reinvent the ugly watchdog code in the syskonnect version of sk98lin. If you read it you will see, the original driver writer and the hardware developer obviously didn't understand each other. Dual port support is included, but not tested yet. It did require small change to NAPI since both ports share same IRQ. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [NET]: Add support for getting the permanent hardware address.Jon Wetzel2005-08-291-0/+1
| | | | | | | | | | This patch adds a new field to net device to hold the permanent hardware address, and adds a new generic ethtool_op function to get that address. Signed-off-by: Jon Wetzel <jon_wetzel@dell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix sparse warningsArnaldo Carvalho de Melo2005-08-291-0/+10
| | | | | | | | | | | Of this type, mostly: CHECK net/ipv6/netfilter.c net/ipv6/netfilter.c:96:12: warning: symbol 'ipv6_netfilter_init' was not declared. Should it be static? net/ipv6/netfilter.c:101:6: warning: symbol 'ipv6_netfilter_fini' was not declared. Should it be static? Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Deinline netif_carrier_{on,off}().Denis Vlasenko2005-08-291-12/+2
| | | | | | | | | | | | | | # grep -r 'netif_carrier_o[nf]' linux-2.6.12 | wc -l 246 # size vmlinux.org vmlinux.carrier text data bss dec hex filename 4339634 1054414 259296 5653344 564360 vmlinux.org 4337710 1054414 259296 5651420 563bdc vmlinux.carrier And this ain't an allyesconfig kernel! Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Kill skb->real_devDavid S. Miller2005-08-291-4/+6
| | | | | | | | | | | Bonding just wants the device before the skb_bond() decapsulation occurs, so simply pass that original device into packet_type->func() as an argument. It remains to be seen whether we can use this same exact thing to get rid of skb->input_dev as well. Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Eliminate netif_rx massive packet drops.Stephen Hemminger2005-06-231-3/+1
| | | | | | | | | | | | | | Eliminate the throttling behaviour when the netif receive queue fills because it behaves badly when using high speed networks under load. The throttling cause multiple packet drops that cause TCP to go into slow start mode. The same effective patch has been part of BIC TCP and H-TCP as well as part of Web100. The existing code drops 100's of packets when the queue fills; this changes it to individual packet drop-tail. Signed-off-by: Stephen Hemmminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Remove obsolete netif_rx congestion sensing mechanism.Stephen Hemminger2005-06-231-2/+0
| | | | | | | | | | | | | Remove the congestion sensing mechanism from netif_rx, and always return either full or empty. Almost no driver checks the return value from netif_rx, and those that do only use it for debug messages. The original design of netif_rx was to do flow control based on the receive queue, but NAPI has supplanted this and no driver uses the feedback. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Remove obsolete fastroute stats.Stephen Hemminger2005-06-231-5/+0
| | | | | | | Remove last vestiages of fastroute code that is no longer used. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] create a kstrdup library functionPaulo Marques2005-06-231-4/+0
| | | | | | | | | | | | | | | | This patch creates a new kstrdup library function and changes the "local" implementations in several places to use this function. Most of the changes come from the sound and net subsystems. The sound part had already been acknowledged by Takashi Iwai and the net part by David S. Miller. I left UML alone for now because I would need more time to read the code carefully before making changes there. Signed-off-by: Paulo Marques <pmarques@grupopie.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud