summaryrefslogtreecommitdiffstats
path: root/include/linux/module.h
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'modules-for-v4.12' of ↵Linus Torvalds2017-05-031-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: - Minor code cleanups - Fix section alignment for .init_array * tag 'modules-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: kallsyms: Use bounded strnchr() when parsing string module: Unify the return value type of try_module_get module: set .init_array alignment to 8
| * module: Unify the return value type of try_module_getGao Feng2017-04-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | The prototypes of try_module_get are different with different macro. When enable module and module unload, it returns bool, but others not. Make the return type for try_module_get consistent across all module config options. Signed-off-by: Gao Feng <fgao@ikuai8.com> [jeyu: slightly amended changelog to make it clearer] Signed-off-by: Jessica Yu <jeyu@redhat.com>
* | locking/lockdep: Handle statically initialized PER_CPU locks properlyThomas Gleixner2017-03-161-0/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge tag 'modules-for-v4.11' of ↵Linus Torvalds2017-02-221-4/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Summary of modules changes for the 4.11 merge window: - A few small code cleanups - Add modules git tree url to MAINTAINERS" * tag 'modules-for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: MAINTAINERS: add tree for modules module: fix memory leak on early load_module() failures module: Optimize search_module_extables() modules: mark __inittest/__exittest as __maybe_unused livepatch/module: print notice of TAINT_LIVEPATCH module: Drop redundant declaration of struct module
| * modules: mark __inittest/__exittest as __maybe_unusedArnd Bergmann2017-02-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang warns about unused inline functions by default: arch/arm/crypto/aes-cipher-glue.c:68:1: warning: unused function '__inittest' [-Wunused-function] arch/arm/crypto/aes-cipher-glue.c:69:1: warning: unused function '__exittest' [-Wunused-function] As these appear in every single module, let's just disable the warnings by marking the two functions as __maybe_unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jessica Yu <jeyu@redhat.com>
| * module: Drop redundant declaration of struct moduleJean Delvare2017-01-031-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Struct module is already declared at the beginning of the file, no need to declare it again. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 93c2e105f6bc ("module: Optimize __module_address() using a latched RB-tree") Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jessica Yu <jeyu@redhat.com>
* | Merge tag 'rodata-v4.11-rc1' of ↵Linus Torvalds2017-02-211-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull rodata updates from Kees Cook: "This renames the (now inaccurate) DEBUG_RODATA and related SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and STRICT_MODULE_RWX" * tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
| * | arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONXLaura Abbott2017-02-071-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | Both of these options are poorly named. The features they provide are necessary for system security and should not be considered debug only. Change the names to CONFIG_STRICT_KERNEL_RWX and CONFIG_STRICT_MODULE_RWX to better describe what these options do. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Jessica Yu <jeyu@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
* | Merge tag 'extable-for-linus' of ↵Linus Torvalds2017-02-211-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull exception table module split from Paul Gortmaker: "Final extable.h related changes. This completes the separation of exception table content from the module.h header file. This is achieved with the final commit that removes the one line back compatible change that sourced extable.h into the module.h file. The commits are unchanged since January, with the exception of a couple Acks that came in for the last two commits a bit later. The changes have been in linux-next for quite some time[1] and have got widespread arch coverage via toolchains I have and also from additional ones the kbuild bot has. Maintaners of the various arch were Cc'd during the postings to lkml[2] and informed that the intention was to take the remaining arch specific changes and lump them together with the final two non-arch specific changes and submit for this merge window. The ia64 diffstat stands out and probably warrants a mention. In an earlier review, Al Viro made a valid comment that the original header separation of content left something to be desired, and that it get fixed as a part of this change, hence the larger diffstat" * tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (21 commits) module.h: remove extable.h include now users have migrated core: migrate exception table users off module.h and onto extable.h cris: migrate exception table users off module.h and onto extable.h hexagon: migrate exception table users off module.h and onto extable.h microblaze: migrate exception table users off module.h and onto extable.h unicore32: migrate exception table users off module.h and onto extable.h score: migrate exception table users off module.h and onto extable.h metag: migrate exception table users off module.h and onto extable.h arc: migrate exception table users off module.h and onto extable.h nios2: migrate exception table users off module.h and onto extable.h sparc: migrate exception table users onto extable.h openrisc: migrate exception table users off module.h and onto extable.h frv: migrate exception table users off module.h and onto extable.h sh: migrate exception table users off module.h and onto extable.h xtensa: migrate exception table users off module.h and onto extable.h mn10300: migrate exception table users off module.h and onto extable.h alpha: migrate exception table users off module.h and onto extable.h arm: migrate exception table users off module.h and onto extable.h m32r: migrate exception table users off module.h and onto extable.h ia64: ensure exception table search users include extable.h ...
| * | module.h: remove extable.h include now users have migratedPaul Gortmaker2017-02-091-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | With hopefully most/all users of module.h that were looking for exception table functions moved over to the new extable.h header, we can remove the back-compat include that let us transition without introducing build regressions. Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jessica Yu <jeyu@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | modversions: treat symbol CRCs as 32 bit quantitiesArd Biesheuvel2017-02-031-7/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The modversion symbol CRCs are emitted as ELF symbols, which allows us to easily populate the kcrctab sections by relying on the linker to associate each kcrctab slot with the correct value. This has a couple of downsides: - Given that the CRCs are treated as memory addresses, we waste 4 bytes for each CRC on 64 bit architectures, - On architectures that support runtime relocation, a R_<arch>_RELATIVE relocation entry is emitted for each CRC value, which identifies it as a quantity that requires fixing up based on the actual runtime load offset of the kernel. This results in corrupted CRCs unless we explicitly undo the fixup (and this is currently being handled in the core module code) - Such runtime relocation entries take up 24 bytes of __init space each, resulting in a x8 overhead in [uncompressed] kernel size for CRCs. Switching to explicit 32 bit values on 64 bit architectures fixes most of these issues, given that 32 bit values are not treated as quantities that require fixing up based on the actual runtime load offset. Note that on some ELF64 architectures [such as PPC64], these 32-bit values are still emitted as [absolute] runtime relocatable quantities, even if the value resolves to a build time constant. Since relative relocations are always resolved at build time, this patch enables MODULE_REL_CRCS on powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC references into relative references into .rodata where the actual CRC value is stored. So redefine all CRC fields and variables as u32, and redefine the __CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using inline assembler (which is necessary since 64-bit C code cannot use 32-bit types to hold memory addresses, even if they are ultimately resolved using values that do not exceed 0xffffffff). To avoid potential problems with legacy 32-bit architectures using legacy toolchains, the equivalent C definition of the kcrctab entry is retained for 32-bit architectures. Note that this mostly reverts commit d4703aefdbc8 ("module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y") Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* module: remove trailing whitespaceAnson Jacob2016-11-261-1/+1
| | | | | | | | Fix checkpatch.pl warning: ERROR: trailing whitespace Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com> Signed-off-by: Jessica Yu <jeyu@redhat.com>
* taint/module: Clean up global and module taint flags handlingPetr Mladek2016-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 66cc69e34e86a231 ("Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE") updated module_taint_flags() to potentially print one more character. But it did not increase the size of the corresponding buffers in m_show() and print_modules(). We have recently done the same mistake when adding a taint flag for livepatching, see https://lkml.kernel.org/r/cfba2c823bb984690b73572aaae1db596b54a082.1472137475.git.jpoimboe@redhat.com Also struct module uses an incompatible type for mod-taints flags. It survived from the commit 2bc2d61a9638dab670d ("[PATCH] list module taint flags in Oops/panic"). There was used "int" for the global taint flags at these times. But only the global tain flags was later changed to "unsigned long" by the commit 25ddbb18aae33ad2 ("Make the taint flags reliable"). This patch defines TAINT_FLAGS_COUNT that can be used to create arrays and buffers of the right size. Note that we could not use enum because the taint flag indexes are used also in assembly code. Then it reworks the table that describes the taint flags. The TAINT_* numbers can be used as the index. Instead, we add information if the taint flag is also shown per-module. Finally, it uses "unsigned long", bit operations, and the updated taint_flags table also for mod->taints. It is not optimal because only few taint flags can be printed by module_taint_flags(). But better be on the safe side. IMHO, it is not worth the optimization and this is a good compromise. Signed-off-by: Petr Mladek <pmladek@suse.com> Link: http://lkml.kernel.org/r/1474458442-21581-1-git-send-email-pmladek@suse.com [jeyu@redhat.com: fix broken lkml link in changelog] Signed-off-by: Jessica Yu <jeyu@redhat.com>
* modules: add ro_after_init supportJessica Yu2016-08-041-2/+4
| | | | | | | | | | Add ro_after_init support for modules by adding a new page-aligned section in the module layout (after rodata) for ro_after_init data and enabling RO protection for that section after module init runs. Signed-off-by: Jessica Yu <jeyu@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* exceptions: fork exception table content from module.h into extable.hPaul Gortmaker2016-08-041-25/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For historical reasons (i.e. pre-git) the exception table stuff was buried in the middle of the module.h file. I noticed this while doing an audit for needless includes of module.h and found core kernel files (both arch specific and arch independent) were just including module.h for this. The converse is also true, in that conventional drivers, be they for filesystems or actual hardware peripherals or similar, do not normally care about the exception tables. Here we fork the exception table content out of module.h into a new file called extable.h -- and temporarily include it into the module.h itself. Then we will work our way across the arch independent and arch specific files needing just exception table content, and move them off module.h and onto extable.h Once that is done, we can remove the extable.h from module.h and in doing it like this, we avoid introducing build failures into the git history. The gain here is that module.h gets a bit smaller, across all modular drivers that we build for allmodconfig. Also the core files that only need exception table stuff don't have an include of module.h that brings in lots of extra stuff and just looks generally out of place. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module: fix noreturn attribute for __module_put_and_exit()Jiri Kosina2016-07-271-2/+2
| | | | | | | | | | __module_put_and_exit() is makred noreturn in module.h declaration, but is lacking the attribute in the definition, which makes some tools (such as sparse) unhappy. Amend the definition with the attribute as well (and reformat the declaration so that it uses more common format). Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module: preserve Elf information for livepatch modulesJessica Yu2016-04-011-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* modules: fix longstanding /proc/kallsyms vs module insertion race.Rusty Russell2016-02-031-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For CONFIG_KALLSYMS, we keep two symbol tables and two string tables. There's one full copy, marked SHF_ALLOC and laid out at the end of the module's init section. There's also a cut-down version that only contains core symbols and strings, and lives in the module's core section. After module init (and before we free the module memory), we switch the mod->symtab, mod->num_symtab and mod->strtab to point to the core versions. We do this under the module_mutex. However, kallsyms doesn't take the module_mutex: it uses preempt_disable() and rcu tricks to walk through the modules, because it's used in the oops path. It's also used in /proc/kallsyms. There's nothing atomic about the change of these variables, so we can get the old (larger!) num_symtab and the new symtab pointer; in fact this is what I saw when trying to reproduce. By grouping these variables together, we can use a carefully-dereferenced pointer to ensure we always get one or the other (the free of the module init section is already done in an RCU callback, so that's safe). We allocate the init one at the end of the module init section, and keep the core one inside the struct module itself (it could also have been allocated at the end of the module core, but that's probably overkill). Reported-by: Weilong Chen <chenweilong@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111541 Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module: clean up RO/NX handling.Rusty Russell2015-12-041-0/+4
| | | | | | | | | | | | | | | | | | | | Modules have three sections: text, rodata and writable data. The code handled the case where these overlapped, however they never can: debug_align() ensures they are always page-aligned. This is why we got away with manually traversing the pages in set_all_modules_text_rw() without rounding. We create three helper functions: frob_text(), frob_rodata() and frob_writable_data(). We then call these explicitly at every point, so it's clear what we're doing. We also expose module_enable_ro() and module_disable_ro() for livepatch to use. Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* module: use a structure to encapsulate layout.Rusty Russell2015-12-041-35/+29
| | | | | | | | | | | | | | Makes it easier to handle init vs core cleanly, though the change is fairly invasive across random architectures. It simplifies the rbtree code immediately, however, while keeping the core data together in the same cachline (now iff the rbtree code is enabled). Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* module: relocate module_init from init.h to module.hPaul Gortmaker2015-07-051-0/+84
| | | | | | | | | | | | | | | | | Modular users will always be users of init functionality, but users of init functionality are not necessarily always modules. Hence any functionality like module_init and module_exit would be more at home in the module.h file. And module.h should explicitly include init.h to make the dependency clear. We've already done all the legwork needed to ensure that this move does not cause any build regressions due to implicit header file include assumptions about where module_init lives. Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* Merge tag 'modules-next-for-linus' of ↵Linus Torvalds2015-07-011-5/+41
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...
| * param: fix module param locks when !CONFIG_SYSFS.Rusty Russell2015-06-281-0/+2
| | | | | | | | | | | | | | | | As Dan Streetman points out, the entire point of locking for is to stop sysfs accesses, so they're elided entirely in the !SYSFS case. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * module: add per-module param_lockDan Streetman2015-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACINGPeter Zijlstra2015-05-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | Andrew worried about the overhead on small systems; only use the fancy code when either perf or tracing is enabled. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Requested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * module: Optimize __module_address() using a latched RB-treePeter Zijlstra2015-05-281-3/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently __module_address() is using a linear search through all modules in order to find the module corresponding to the provided address. With a lot of modules this can take a lot of time. One of the users of this is kernel_text_address() which is employed in many stack unwinders; which in turn are used by perf-callchain and ftrace (possibly from NMI context). So by optimizing __module_address() we optimize many stack unwinders which are used by both perf and tracing in performance sensitive code. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * module: Sanitize RCU usage and lockingPeter Zijlstra2015-05-281-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the RCU usage in module is an inconsistent mess of RCU and RCU-sched, this is broken for CONFIG_PREEMPT where synchronize_rcu() does not imply synchronize_sched(). Most usage sites use preempt_{dis,en}able() which is RCU-sched, but (most of) the modification sites use synchronize_rcu(). With the exception of the module bug list, which actually uses RCU. Convert everything over to RCU-sched. Furthermore add lockdep asserts to all sites, because it's not at all clear to me the required locking is observed, esp. on exported functions. Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | Merge tag 'driver-core-4.2-rc1' of ↵Linus Torvalds2015-06-261-0/+13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the driver core / firmware changes for 4.2-rc1. A number of small changes all over the place in the driver core, and in the firmware subsystem. Nothing really major, full details in the shortlog. Some of it is a bit of churn, given that the platform driver probing changes was found to not work well, so they were reverted. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits) Revert "base/platform: Only insert MEM and IO resources" Revert "base/platform: Continue on insert_resource() error" Revert "of/platform: Use platform_device interface" Revert "base/platform: Remove code duplication" firmware: add missing kfree for work on async call fs: sysfs: don't pass count == 0 to bin file readers base:dd - Fix for typo in comment to function driver_deferred_probe_trigger(). base/platform: Remove code duplication of/platform: Use platform_device interface base/platform: Continue on insert_resource() error base/platform: Only insert MEM and IO resources firmware: use const for remaining firmware names firmware: fix possible use after free on name on asynchronous request firmware: check for file truncation on direct firmware loading firmware: fix __getname() missing failure check drivers: of/base: move of_init to driver_init drivers/base: cacheinfo: fix annoying typo when DT nodes are absent sysfs: disambiguate between "error code" and "failure" in comments driver-core: fix build for !CONFIG_MODULES driver-core: make __device_attach() static ...
| * | driver-core: fix build for !CONFIG_MODULESDmitry Torokhov2015-05-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f2411da74698 ("driver-core: add driver module asynchronous probe support") broke build in case modules are disabled, because in this case "struct module" is not defined and we can't dereference it. Let's define module_requested_async_probing() helper and stub it out if modules are disabled. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | driver-core: add driver module asynchronous probe supportLuis R. Rodriguez2015-05-201-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some init systems may wish to express the desire to have device drivers run their probe() code asynchronously. This implements support for this and allows userspace to request async probe as a preference through a generic shared device driver module parameter, async_probe. Implementation for async probe is supported through a module parameter given that since synchronous probe has been prevalent for years some userspace might exist which relies on the fact that the device driver will probe synchronously and the assumption that devices it provides will be immediately available after this. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'trace-v4.2' of ↵Linus Torvalds2015-06-261-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This patch series contains several clean ups and even a new trace clock "monitonic raw". Also some enhancements to make the ring buffer even faster. But the biggest and most noticeable change is the renaming of the ftrace* files, structures and variables that have to deal with trace events. Over the years I've had several developers tell me about their confusion with what ftrace is compared to events. Technically, "ftrace" is the infrastructure to do the function hooks, which include tracing and also helps with live kernel patching. But the trace events are a separate entity altogether, and the files that affect the trace events should not be named "ftrace". These include: include/trace/ftrace.h -> include/trace/trace_events.h include/linux/ftrace_event.h -> include/linux/trace_events.h Also, functions that are specific for trace events have also been renamed: ftrace_print_*() -> trace_print_*() (un)register_ftrace_event() -> (un)register_trace_event() ftrace_event_name() -> trace_event_name() ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled() ftrace_define_fields_##call() -> trace_define_fields_##call() ftrace_get_offsets_##call() -> trace_get_offsets_##call() Structures have been renamed: ftrace_event_file -> trace_event_file ftrace_event_{call,class} -> trace_event_{call,class} ftrace_event_buffer -> trace_event_buffer ftrace_subsystem_dir -> trace_subsystem_dir ftrace_event_raw_##call -> trace_event_raw_##call ftrace_event_data_offset_##call-> trace_event_data_offset_##call ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call And a few various variables and flags have also been updated. This has been sitting in linux-next for some time, and I have not heard a single complaint about this rename breaking anything. Mostly because these functions, variables and structures are mostly internal to the tracing system and are seldom (if ever) used by anything external to that" * tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) ring_buffer: Allow to exit the ring buffer benchmark immediately ring-buffer-benchmark: Fix the wrong type ring-buffer-benchmark: Fix the wrong param in module_param ring-buffer: Add enum names for the context levels ring-buffer: Remove useless unused tracing_off_permanent() ring-buffer: Give NMIs a chance to lock the reader_lock ring-buffer: Add trace_recursive checks to ring_buffer_write() ring-buffer: Allways do the trace_recursive checks ring-buffer: Move recursive check to per_cpu descriptor ring-buffer: Add unlikelys to make fast path the default tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call() tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call() tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled() tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_* tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir tracing: Rename ftrace_event_name() to trace_event_name() tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX ...
| * | tracing: Rename ftrace_event_{call,class} to trace_event_{call,class}Steven Rostedt (Red Hat)2015-05-131-1/+1
| |/ | | | | | | | | | | | | | | | | The name "ftrace" really refers to the function hook infrastructure. It is not about the trace_events. The structures ftrace_event_call and ftrace_event_class have nothing to do with the function hooks, and are really trace_event structures. Rename ftrace_event_* to trace_event_*. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* | crypto: api - Move module sig ifdef into accessor functionHerbert Xu2015-04-231-0/+12
|/ | | | | | | | | Currently we're hiding mod->sig_ok under an ifdef in open code. This patch adds a module_sig_ok accessor function and removes that ifdef. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
* Merge tag 'trace-v4.1' of ↵Linus Torvalds2015-04-141-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Some clean ups and small fixes, but the biggest change is the addition of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints. Tracepoints have helper functions for the TP_printk() called __print_symbolic() and __print_flags() that lets a numeric number be displayed as a a human comprehensible text. What is placed in the TP_printk() is also shown in the tracepoint format file such that user space tools like perf and trace-cmd can parse the binary data and express the values too. Unfortunately, the way the TRACE_EVENT() macro works, anything placed in the TP_printk() will be shown pretty much exactly as is. The problem arises when enums are used. That's because unlike macros, enums will not be changed into their values by the C pre-processor. Thus, the enum string is exported to the format file, and this makes it useless for user space tools. The TRACE_DEFINE_ENUM() solves this by converting the enum strings in the TP_printk() format into their number, and that is what is shown to user space. For example, the tracepoint tlb_flush currently has this in its format file: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) After adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); Its format file will contain this: __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" })" * tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Add enum_map file to show enums that have been mapped writeback: Export enums used by tracepoint to user space v4l: Export enums used by tracepoints to user space SUNRPC: Export enums in tracepoints to user space mm: tracing: Export enums in tracepoints to user space irq/tracing: Export enums in tracepoints to user space f2fs: Export the enums in the tracepoints to userspace net/9p/tracing: Export enums in tracepoints to userspace x86/tlb/trace: Export enums in used by tlb_flush tracepoint tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM() tracing: Allow for modules to convert their enums to values tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation tracing: Give system name a pointer brcmsmac: Move each system tracepoints to their own header iwlwifi: Move each system tracepoints to their own header mac80211: Move message tracepoints to their own header tracing: Add TRACE_SYSTEM_VAR to xhci-hcd tracing: Add TRACE_SYSTEM_VAR to kvm-s390 tracing: Add TRACE_SYSTEM_VAR to intel-sst ...
| * tracing: Allow for modules to convert their enums to valuesSteven Rostedt (Red Hat)2015-04-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Update the infrastructure such that modules that declare TRACE_DEFINE_ENUM() will have those enums converted into their values in the tracepoint print fmt strings. Link: http://lkml.kernel.org/r/87vbhjp74q.fsf@rustcorp.com.au Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2015-03-181-0/+4
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching fix from Jiri Kosina: - fix for potential race with module loading, from Petr Mladek. The race is very unlikely to be seen in real world and has been found by code inspection, but should be fixed for 4.0 anyway. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Fix subtle race with coming and going modules
| * livepatch: Fix subtle race with coming and going modulesPetr Mladek2015-03-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a notifier that handles live patches for coming and going modules. It takes klp_mutex lock to avoid races with coming and going patches but it does not keep the lock all the time. Therefore the following races are possible: 1. The notifier is called sometime in STATE_MODULE_COMING. The module is visible by find_module() in this state all the time. It means that new patch can be registered and enabled even before the notifier is called. It might create wrong order of stacked patches, see below for an example. 2. New patch could still see the module in the GOING state even after the notifier has been called. It will try to initialize the related object structures but the module could disappear at any time. There will stay mess in the structures. It might even cause an invalid memory access. This patch solves the problem by adding a boolean variable into struct module. The value is true after the coming and before the going handler is called. New patches need to be applied when the value is true and they need to ignore the module when the value is false. Note that we need to know state of all modules on the system. The races are related to new patches. Therefore we do not know what modules will get patched. Also note that we could not simply ignore going modules. The code from the module could be called even in the GOING state until mod->exit() finishes. If we start supporting patches with semantic changes between function calls, we need to apply new patches to any still usable code. See below for an example. Finally note that the patch solves only the situation when a new patch is registered. There are no such problems when the patch is being removed. It does not matter who disable the patch first, whether the normal disable_patch() or the module notifier. There is nothing to do once the patch is disabled. Alternative solutions: ====================== + reject new patches when a patched module is coming or going; this is ugly + wait with adding new patch until the module leaves the COMING and GOING states; this might be dangerous and complicated; we would need to release kgr_lock in the middle of the patch registration to avoid a deadlock with the coming and going handlers; also we might need a waitqueue for each module which seems to be even bigger overhead than the boolean + stop modules from entering COMING and GOING states; wait until modules leave these states when they are already there; looks complicated; we would need to ignore the module that asked to stop the others to avoid a deadlock; also it is unclear what to do when two modules asked to stop others and both are in COMING state (situation when two new patches are applied) + always register/enable new patches and fix up the potential mess (registered patches order) in klp_module_init(); this is nasty and prone to regressions in the future development + add another MODULE_STATE where the kallsyms are visible but the module is not used yet; this looks too complex; the module states are checked on "many" locations Example of patch stacking breakage: =================================== The notifier could _not_ _simply_ ignore already initialized module objects. For example, let's have three patches (P1, P2, P3) for functions a() and b() where a() is from vmcore and b() is from a module M. Something like: a() b() P1 a1() b1() P2 a2() b2() P3 a3() b3(3) If you load the module M after all patches are registered and enabled. The ftrace ops for function a() and b() has listed the functions in this order: ops_a->func_stack -> list(a3,a2,a1) ops_b->func_stack -> list(b3,b2,b1) , so the pointer to b3() is the first and will be used. Then you might have the following scenario. Let's start with state when patches P1 and P2 are registered and enabled but the module M is not loaded. Then ftrace ops for b() does not exist. Then we get into the following race: CPU0 CPU1 load_module(M) complete_formation() mod->state = MODULE_STATE_COMING; mutex_unlock(&module_mutex); klp_register_patch(P3); klp_enable_patch(P3); # STATE 1 klp_module_notify(M) klp_module_notify_coming(P1); klp_module_notify_coming(P2); klp_module_notify_coming(P3); # STATE 2 The ftrace ops for a() and b() then looks: STATE1: ops_a->func_stack -> list(a3,a2,a1); ops_b->func_stack -> list(b3); STATE2: ops_a->func_stack -> list(a3,a2,a1); ops_b->func_stack -> list(b2,b1,b3); therefore, b2() is used for the module but a3() is used for vmcore because they were the last added. Example of the race with going modules: ======================================= CPU0 CPU1 delete_module() #SYSCALL try_stop_module() mod->state = MODULE_STATE_GOING; mutex_unlock(&module_mutex); klp_register_patch() klp_enable_patch() #save place to switch universe b() # from module that is going a() # from core (patched) mod->exit(); Note that the function b() can be called until we call mod->exit(). If we do not apply patch against b() because it is in MODULE_STATE_GOING, it will call patched a() with modified semantic and things might get wrong. [jpoimboe@redhat.com: use one boolean instead of two] Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | module: fix types of device tables aliasesAndrey Ryabinin2015-02-131-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MODULE_DEVICE_TABLE() macro used to create aliases to device tables. Normally alias should have the same type as aliased symbol. Device tables are arrays, so they have 'struct type##_device_id[x]' types. Alias created by MODULE_DEVICE_TABLE() will have non-array type - 'struct type##_device_id'. This inconsistency confuses compiler, it could make a wrong assumption about variable's size which leads KASan to produce a false positive report about out of bounds access. For every global variable compiler calls __asan_register_globals() passing information about global variable (address, size, size with redzone, name ...) __asan_register_globals() poison symbols redzone to detect possible out of bounds accesses. When symbol has an alias __asan_register_globals() will be called as for symbol so for alias. Compiler determines size of variable by size of variable's type. Alias and symbol have the same address, so if alias have the wrong size part of memory that actually belongs to the symbol could be poisoned as redzone of alias symbol. By fixing type of alias symbol we will fix size of it, so __asan_register_globals() will not poison valid memory. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* module: make module_refcount() a signed integer.Rusty Russell2015-01-221-1/+1
| | | | | | | | | | | James Bottomley points out that it will be -1 during unload. It's only used for diagnostics, so let's not hide that as it could be a clue as to what's gone wrong. Cc: Jason Wessel <jason.wessel@windriver.com> Acked-and-documention-added-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Masami Hiramatsu <maasami.hiramatsu.pt@hitachi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module: Replace module_ref with atomic_t refcntMasami Hiramatsu2014-11-111-15/+1
| | | | | | | | Replace module_ref per-cpu complex reference counter with an atomic_t simple refcnt. This is for code simplification. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module: return bool from within_module*()Petr Mladek2014-07-271-3/+5
| | | | | | | | | | The within_module*() functions return only true or false. Let's use bool as the return type. Note that it should not change kABI because these are inline functions. Signed-off-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module: add within_module() functionPetr Mladek2014-07-271-0/+5
| | | | | | | | | It is just a small optimization that allows to replace few occurrences of within_module_init() || within_module_core() with a single call. Signed-off-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* Merge tag 'modules-next-for-linus' of ↵Linus Torvalds2014-04-061-11/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont
| * module: remove MODULE_GENERIC_TABLERusty Russell2014-03-131-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | MODULE_DEVICE_TABLE() calles MODULE_GENERIC_TABLE(); make it do the work directly. This also removes a wart introduced in the last patch, where the alias is defined to be an unknown struct type "struct type##__##name##_device_id" instead of "struct type##_device_id" (it's an extern so GCC doesn't care, but it's wrong). The other user of MODULE_GENERIC_TABLE (ISAPNP_CARD_TABLE) is unused, so delete it. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * module: allow multiple calls to MODULE_DEVICE_TABLE() per moduleTom Gundersen2014-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 78551277e4df5: "Input: i8042 - add PNP modaliases" had a bug, where the second call to MODULE_DEVICE_TABLE() overrode the first resulting in not all the modaliases being exposed. This fixes the problem by including the name of the device_id table in the __mod_*_device_table alias, allowing us to export several device_id tables per module. Suggested-by: Kay Sievers <kay@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | tracing/module: Replace include of tracepoint.h with jump_label.h in module.hSteven Rostedt (Red Hat)2014-03-071-1/+1
|/ | | | | | | | | | | | | | There's nothing in the module.h header that requires tracepoint.h to be included, and there may be cases that tracepoint.h may need to include module.h, which will cause recursive header issues. But module.h requires seeing HAVE_JUMP_LABEL which is set in jump_label.h which it just coincidentally gets from tracepoint.h. Link: http://lkml.kernel.org/r/20140307084712.5c68641a@gandalf.local.home Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* module: fix coding styleSeunghun Lee2014-01-161-31/+31
| | | | | | | Fix coding style of module.h Signed-off-by: Seunghun Lee <waydi1@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module.h: Remove unnecessary semicolonJoe Perches2013-12-041-1/+1
| | | | | | | [All 8 callers already have semicolons. -- RR] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module: remove rmmod --wait option.Rusty Russell2013-09-231-3/+0
| | | | | | | | | | | | | | The option to wait for a module reference count to reach zero was in the initial module implementation, but it was never supported in modprobe (you had to use rmmod --wait). After discussion with Lucas, It has been deprecated (with a 10 second sleep) in kmod for the last year. This finally removes it: the flag will evoke a printk warning and a normal (non-blocking) remove attempt. Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* module: Fix mod->mkobj.kobj potentially freed too earlyLi Zhong2013-09-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DEBUG_KOBJECT_RELEASE helps to find the issue attached below. After some investigation, it seems the reason is: The mod->mkobj.kobj(ffffffffa01600d0 below) is freed together with mod itself in free_module(). However, its children still hold references to it, as the delay caused by DEBUG_KOBJECT_RELEASE. So when the child(holders below) tries to decrease the reference count to its parent in kobject_del(), BUG happens as it tries to access already freed memory. This patch tries to fix it by waiting for the mod->mkobj.kobj to be really released in the module removing process (and some error code paths). [ 1844.175287] kobject: 'holders' (ffff88007c1f1600): kobject_release, parent ffffffffa01600d0 (delayed) [ 1844.178991] kobject: 'notes' (ffff8800370b2a00): kobject_release, parent ffffffffa01600d0 (delayed) [ 1845.180118] kobject: 'holders' (ffff88007c1f1600): kobject_cleanup, parent ffffffffa01600d0 [ 1845.182130] kobject: 'holders' (ffff88007c1f1600): auto cleanup kobject_del [ 1845.184120] BUG: unable to handle kernel paging request at ffffffffa01601d0 [ 1845.185026] IP: [<ffffffff812cda81>] kobject_put+0x11/0x60 [ 1845.185026] PGD 1a13067 PUD 1a14063 PMD 7bd30067 PTE 0 [ 1845.185026] Oops: 0000 [#1] PREEMPT [ 1845.185026] Modules linked in: xfs libcrc32c [last unloaded: kprobe_example] [ 1845.185026] CPU: 0 PID: 18 Comm: kworker/0:1 Tainted: G O 3.11.0-rc6-next-20130819+ #1 [ 1845.185026] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 1845.185026] Workqueue: events kobject_delayed_cleanup [ 1845.185026] task: ffff88007ca51f00 ti: ffff88007ca5c000 task.ti: ffff88007ca5c000 [ 1845.185026] RIP: 0010:[<ffffffff812cda81>] [<ffffffff812cda81>] kobject_put+0x11/0x60 [ 1845.185026] RSP: 0018:ffff88007ca5dd08 EFLAGS: 00010282 [ 1845.185026] RAX: 0000000000002000 RBX: ffffffffa01600d0 RCX: ffffffff8177d638 [ 1845.185026] RDX: ffff88007ca5dc18 RSI: 0000000000000000 RDI: ffffffffa01600d0 [ 1845.185026] RBP: ffff88007ca5dd18 R08: ffffffff824e9810 R09: ffffffffffffffff [ 1845.185026] R10: ffff8800ffffffff R11: dead4ead00000001 R12: ffffffff81a95040 [ 1845.185026] R13: ffff88007b27a960 R14: ffff88007c1f1600 R15: 0000000000000000 [ 1845.185026] FS: 0000000000000000(0000) GS:ffffffff81a23000(0000) knlGS:0000000000000000 [ 1845.185026] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1845.185026] CR2: ffffffffa01601d0 CR3: 0000000037207000 CR4: 00000000000006b0 [ 1845.185026] Stack: [ 1845.185026] ffff88007c1f1600 ffff88007c1f1600 ffff88007ca5dd38 ffffffff812cdb7e [ 1845.185026] 0000000000000000 ffff88007c1f1640 ffff88007ca5dd68 ffffffff812cdbfe [ 1845.185026] ffff88007c974800 ffff88007c1f1640 ffff88007ff61a00 0000000000000000 [ 1845.185026] Call Trace: [ 1845.185026] [<ffffffff812cdb7e>] kobject_del+0x2e/0x40 [ 1845.185026] [<ffffffff812cdbfe>] kobject_delayed_cleanup+0x6e/0x1d0 [ 1845.185026] [<ffffffff81063a45>] process_one_work+0x1e5/0x670 [ 1845.185026] [<ffffffff810639e3>] ? process_one_work+0x183/0x670 [ 1845.185026] [<ffffffff810642b3>] worker_thread+0x113/0x370 [ 1845.185026] [<ffffffff810641a0>] ? rescuer_thread+0x290/0x290 [ 1845.185026] [<ffffffff8106bfba>] kthread+0xda/0xe0 [ 1845.185026] [<ffffffff814ff0f0>] ? _raw_spin_unlock_irq+0x30/0x60 [ 1845.185026] [<ffffffff8106bee0>] ? kthread_create_on_node+0x130/0x130 [ 1845.185026] [<ffffffff8150751a>] ret_from_fork+0x7a/0xb0 [ 1845.185026] [<ffffffff8106bee0>] ? kthread_create_on_node+0x130/0x130 [ 1845.185026] Code: 81 48 c7 c7 28 95 ad 81 31 c0 e8 9b da 01 00 e9 4f ff ff ff 66 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 85 ff 74 1d <f6> 87 00 01 00 00 01 74 1e 48 8d 7b 38 83 6b 38 01 0f 94 c0 84 [ 1845.185026] RIP [<ffffffff812cda81>] kobject_put+0x11/0x60 [ 1845.185026] RSP <ffff88007ca5dd08> [ 1845.185026] CR2: ffffffffa01601d0 [ 1845.185026] ---[ end trace 49a70afd109f5653 ]--- Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
OpenPOWER on IntegriCloud