summaryrefslogtreecommitdiffstats
path: root/include/linux/mfd
Commit message (Collapse)AuthorAgeFilesLines
* regulator: Implement WM831x BuckWise DC-DC convertor DVS supportMark Brown2009-12-171-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BuckWise DC-DC convertors in WM831x devices support switching to a second output voltage using the logic level on one of the device pins. This is intended to allow rapid voltage switching for uses like cpufreq, replacing the I2C or SPI write used to configure the voltage of the regulator with a much faster GPIO status change. This is implemented by keeping the DVS voltage configured as the maximum voltage permitted for the regulator. If a request is made for the maximum voltage then the GPIO is used to switch to the DVS voltage, otherwise the normal ON voltage is updated and used. This follows the idiom used by most cpufreq drivers, which drop the minimum voltage as the core frequency is dropped but use a constant maximum - raising the voltage should normally be fast, but lowering it may be slower. Configuration of the DVS MFP on the device should be done externally, for example via OTP. Support is present in the hardware for monitoring the status of the transition using a second GPIO. This is not currently implemented but platform data is provided for it - the driver currently assumes that the device will be configured to transition immediately - but platform data is provided to reduce merge issues once it is. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge git://git.infradead.org/battery-2.6Linus Torvalds2009-12-152-1/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/battery-2.6: power_supply_sysfs: Handle -ENODATA in a special way wm831x_backup: Remove unused variables gta02: Set pcf50633 charger_reference_current_ma pcf50633: Query charger status directly pcf50633: Properly reenable charging when the supply conditions change pcf50633: Get rid of charging restart software auto-triggering pcf50633: introduces battery charging current control pcf50633: Add ac power supply class to the charger wm831x: Factor out WM831x backup battery charger
| * pcf50633: Query charger status directlyPaul Fertser2009-11-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Current scheme is fragile and is likely to go off sync, especially on batfull->adapter charging automatic MBC transition. Query the status bit every time we need it instead. We need to export another function to query for USB presence because we can't read anything from PCF50633 (via I2C) inside irq context and that is needed by usb gadgets. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * pcf50633: Get rid of charging restart software auto-triggeringPaul Fertser2009-11-161-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | After reaching Battery Full condition MBC state machine switches back into charging mode when the battery voltage falls below 96% of a battery float voltage. The voltage drop in Li-Ion batteries is marginal (1-2%) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 75-80%. That is a desired behaviour recommended by battery manufacturers, don't mess with it. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * pcf50633: introduces battery charging current controlBalaji Rao2009-11-161-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a new sysfs attribute to allow changing MBC charging limit on the fly independently of usb current limit. It also gets set automatically every time usb current limit is changed. Limiting charging current also prevents violating USB specification in the case when the whole device is shut down and usb current limit is reset to the factory default by the pcf50633 state transition. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | mfd: Remove ezx-pcap defines for custom led gpio encodingAntonio Ospite2009-12-131-3/+0
| | | | | | | | | | | | | | | | | | | | | | We used these, in a first version of leds-pcap driver, in order to encode gpio enabling and gpio inversion for a led inside the variable used for the gpio number. In the new leds-pcap driver we rely on gpio_is_valid() to derive if a led is gpio enabled and we have a dedicated flag to tell if the gpio value has to be inverted. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Near complete mc13783 rewriteUwe Kleine-König2009-12-132-217/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes several things while still providing the old API: - simplify and fix locking - better error handling - don't ack all irqs making it impossible to detect a reset of the rtc - use a timeout variant to wait for completion of ADC conversion - provide platform-data to regulator subdevice (This allows making struct mc13783 opaque for other drivers after the regulator driver is updated to use its platform_data.) - expose all interrupts - use threaded irq After all users in mainline are converted to the new API, some things (e.g. mc13783-private.h) can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Move WM831x to generic IRQMark Brown2009-12-132-11/+30
| | | | | | | | | | | | | | | | | | | | | | Replace the wm831x-local IRQ infrastructure with genirq, allowing access to the diagnostic infrastructure of genirq and allowing us to implement interrupt support for the GPIOs. The switchover is done within the wm831x specific IRQ API, further patches will convert the individual drivers to use genirq directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Convert wm8350 IRQ handlers to irq_handler_tMark Brown2009-12-131-4/+4
| | | | | | | | | | | | | | | | | | This is done as simple code transformation, the semantics of the IRQ API provided by the core are are still very different to those of genirq (mainly with regard to masking). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Allow platforms to specify an IRQ base for WM8350Mark Brown2009-12-131-0/+2
| | | | | | | | | | | | | | | | | | This is currently unused by the wm8350 drivers but getting it merged now will reduce merge issues in the future when implementing wm8350 genirq support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Fix memleak in pcf50633_client_dev_registerLars-Peter Clausen2009-12-131-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Since platform_device_add_data copies the passed data, the allocated subdev_pdata is never freed. A simple fix would be to either free subdev_pdata or put it onto the stack. But since the pcf50633 child devices can rely on beeing children of the pcf50633 core device it's much more elegant to get access to pcf50633 core structure through that link. This allows to get completly rid of pcf5033_subdev_pdata. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Convert WM835x IRQ handling to use a data tableMark Brown2009-12-131-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than open coding individual IRQs in each function which manipulates them store data for IRQs in a table which is then referenced in the users. This is a substantial code shrink and should be a performance win in cases where only a single IRQ goes off at once since instead of reading four of the second level IRQ registers for each interrupt we read only the sub-registers which have had an interrupt flagged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Split wm8350 IRQ code into a separate fileMark Brown2009-12-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | In preparation for refactoring - it's over 700 lines of well-isolated code and having it in a file by itself makes things more managable. While we're at it make sure that we clean up the IRQ if we fail after acquiring it on init. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Add ADP5520/ADP5501 driverMichael Hennerich2009-12-131-0/+299
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Base driver for Analog Devices ADP5520/ADP5501 MFD PMICs Subdevs: LCD Backlight : drivers/video/backlight/adp5520_bl.c LEDs : drivers/led/leds-adp5520.c GPIO : drivers/gpio/adp5520-gpio.c (ADP5520 only) Keys : drivers/input/keyboard/adp5520-keys.c (ADP5520 only) Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Add support for WM8320 PMICsMark Brown2009-12-131-0/+1
| | | | | | | | | | | | | | | | | | | | The WM8320 is an integrated power management subsystem providing voltage regulators, RTC, watchdog and other functionality. The WM8320 is derived from the WM831x and therefore shares most of the driver code with the WM831x. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | gpiolib: Make WM831x GPIO count dynamicMark Brown2009-12-131-0/+2
| | | | | | | | | | | | | | This supports future devices with fewer GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: add AB4500 driverSrinidhi Kasagar2009-12-131-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds core driver support for AB4500 mixed signal multimedia & power management chip. This connects to U8500 on the SSP (pl022) and exports read/write functions for the device to get access to this chip. This also registers the client devices and sets the parent. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Reviewed-by: Mark Brown <broonie@sirena.org.uk> Reviewed-by: Jean-Christophe <plagnioj@jcrosoft.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Add 88PM8607 driverHaojian Zhuang2009-12-131-0/+217
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds a core driver for 88PM8607 found in Marvell DKB development platform. This driver is a proxy for all accesses to 88PM8607 sub-drivers which will be merged on top of this one, RTC, regulators, battery and so on. This chip is manufactured by Marvell. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-12-091-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
| * \ Merge branch 'for-next' into for-linusJiri Kosina2009-12-071-2/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | Conflicts: kernel/irq/chip.c
| | * | tree-wide: fix assorted typos all over the placeAndré Goddard Rosa2009-12-041-2/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2009-12-091-0/+8
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits) sh: include empty zero page in romImage sh: Make associative cache writes fatal on all SH-4A parts. sh: Drop associative writes for SH-4 cache flushes. sh: Partial revert of copy/clear_user_highpage() optimizations. sh: Add default uImage rule for se7724, ap325rxa, and migor. sh: allow runtime pm without suspend/resume callbacks sh: mach-ecovec24: Remove un-defined settings for VPU sh: mach-ecovec24: LCDC drive ability become high sh: fix sh7724 VEU3F resource size serial: sh-sci: Fix too early port disabling. sh: pfc: pr_info() -> pr_debug() cleanups. sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines. sh: Improve kfr2r09 serial port setup code sh: Break out SuperH PFC code sh: Move KEYSC header file sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file sh: Add CPG save/restore code for sh7724 R-standby sh: Add SDHI power control support to Ecovec mfd: Add power control platform data to SDHI driver sh: mach-ecovec24: modify address map ...
| * | | mfd: Add power control platform data to SDHI driverMagnus Damm2009-11-301-0/+8
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds platform data with a function for power control to the SDHI driver. The idea is that board specific code can provide their own functions so power can be enabled and disabled for the sd-cards. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-12-083-0/+331
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (272 commits) Fix soc_common PCMCIA configuration ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_request ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driver ARM: 5825/1: SA1100: h3600: update defconfig ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100 ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keys ARM: 5822/1: SA1100: h3100/h3600: clean up #includes ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplates ARM: 5820/1: SA1100: h3100/h3600: split h3600.c ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitions ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitions ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlers ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driver ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpers ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolib ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pins ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.h ...
| * \ \ Merge branch 'sa1100' into develRussell King2009-12-063-2/+329
| |\ \ \
| | * \ \ Merge branch 'for-lak' of git://git.linuxtogo.org/home/thesing/collie into ↵Russell King2009-12-062-0/+327
| | |\ \ \ | | | |_|/ | | |/| | | | | | | sa1100
| | | * | add gpiolib support to ucb1x00Thomas Kunze2009-11-272-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | The old access methods to the gpios will be removed when all users has been converted. (mainly ucb1x00-ts)
| | | * | move drivers/mfd/*.h to include/linux/mfdThomas Kunze2009-11-272-0/+323
| | | |/ | | | | | | | | | | | | | | | | So drivers like collie_battery driver can use those files easier.
| * | | backlight: da903x_bl: control WLED output current in da9034Haojian Zhuang2009-12-011-0/+4
| | |/ | |/| | | | | | | | | | | | | | | | Update WLED output current source before changing brightness. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2009-12-081-0/+272
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (294 commits) S3C64XX: Staticise platform data for PCM devices ASoC: Rename controls with a / in wm_hubs snd-fm801: autodetect SF64-PCR (tuner-only) card ALSA: tea575x-tuner: fix mute ASoC: au1x: dbdma2: plug memleak in pcm device creation error path ASoC: au1x: dbdma2: fix oops on soc device removal. ALSA: hda - Fix memory leaks in the previous patch ALSA: hda - Add ALC661/259, ALC892/888VD support ALSA: opti9xx: remove snd_opti9xx fields ALSA: aaci - Clean up duplicate code ALSA: usb - Fix mixer map for Hercules Gamesurround Muse Pocket LT ALSA: hda - Add position_fix quirk for HP dv3 ALSA: hda - Add a pin-fix for FSC Amilo Pi1505 ALSA: hda - Fix Cxt5047 test mode ASoC: pxa/raumfeld: adopt new snd_soc_dai_set_pll() API ASoC: sh: fsi: Add runtime PM support sh: ms7724se: Add runtime PM support for FSI ALSA: hda - Add a position_fix quirk for MSI Wind U115 ALSA: opti-miro: add PnP detection ALSA: opti-miro: separate comon probing code ...
| * | MFD: twl4030-codec: APLL_INFREQ handling in the MFD driverPeter Ujfalusi2009-11-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configure the APLL_INFREQ field in the APLL_CTL register based on the platform data. Provide also a function for childs to query the audio_mclk frequency. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | MFD: twl4030: add twl4030_codec MFD as a new child to the corePeter Ujfalusi2009-10-251-0/+271
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New MFD child to twl4030 MFD device. Reason for the twl4030_codec MFD: the vibra control is actually in the codec part of the twl4030. If both the vibra and the audio functionality is needed from the twl4030 at the same time, than they need to control the codec power and APLL at the same time without breaking the other driver. Also these two has to be able to work without the need for the other driver. This MFD device will be used by the drivers, which needs resources from the twl4030 codec like audio and vibra. The platform specific configuration data is passed along to the child drivers (audio, vibra). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | mfd: Correct WM831X_MAX_ISEL_VALUEMark Brown2009-12-011-2/+2
|/ | | | | | | | | There was confusion between the array size and the highest ISEL value possible. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds2009-09-261-0/+34
|\ | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: move leds-clevo-mail's probe function to .devinit.text leds: Fix indentation in LEDS_LP3944 Kconfig entry leds: Fix LED names leds: Fix leds-pca9532 whitespace issues leds: fix coding style in worker thread code for ledtrig-gpio. leds: gpio-leds: fix typographics fault leds: Add WM831x status LED driver
| * leds: Add WM831x status LED driverMark Brown2009-09-071-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WM831x devices feature two software controlled status LEDs with hardware assisted blinking. The device can also autonomously control the LEDs based on a selection of sources. This can be configured at boot time using either platform data or the chip OTP. A sysfs file in the style of that for triggers allowing the control source to be configured at run time. Triggers can't be used here since they can't depend on the implementation details of a specific LED type. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* | Merge git://git.infradead.org/battery-2.6Linus Torvalds2009-09-231-0/+189
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/battery-2.6: power_supply: Add driver for the PMU on WM831x PMICs ds2760_battery: Fix integer overflow for time_to_empty_now wm97xx_battery: Convert to dev_pm_ops wm97xx_battery: Use irq to detect charger state wm97xx_battery: Use platform_data wm97xx-core: Pass platform_data to battery ds2760_battery: implement set_charged() feature power_supply: get_by_name and set_charged functionality power_supply: EXPORT_SYMBOL cleanups ds2760_battery: add current_accum module parameter ds2760_battery: handle full_active_uAh == 0 case correctly ds2760_battery: add rated_capacity module parameter ds2760_battery: export more features ds2760_battery: delay power supply registration wm8350_power: Implement charge type property power_supply: Add a charge_type property, and use it for olpc driver olpc_battery: Add an 'error' sysfs device that displays raw errors Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"
| * \ Merge branch 'master' of ↵Anton Vorontsov2009-09-2316-10/+3395
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/power/wm97xx_battery.c
| * | | power_supply: Add driver for the PMU on WM831x PMICsMark Brown2009-09-041-0/+189
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WM831x PMICs provide power path management from three sources: a wall supply, USB and a battery with integrated charger. They also provide an additional backup supply with integrated for maintaining always on functionality such as the RTC and monitoring of power switches. After some initial configuration at startup the device operates autonomously, the driver simply provides reporting of the current state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* | | regulator: add buck3 in da903x driverHaojian Zhuang2009-09-221-1/+3
| |/ |/| | | | | | | | | | | | | | | | | BUCK3 is the new component in DA9035. So there're three BUCKs in DA9035. And there're two BUCKs in DA9034. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2009-09-181-0/+52
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] sizeof cleanup [WATCHDOG] wdt_pci: fix printk and variable type [WATCHDOG] wdt_pci - use pci_request_region [WATCHDOG] ar7_wdt: Fix error handling during probe. [WATCHDOG] ar7_wdt: convert to become a platform driver [WATCHDOG] fix book E watchdog to take WDIOC_SETTIMEOUT arg in seconds [WATCHDOG] davinci: use clock framework for timer frequency [WATCHDOG] Use DIV_ROUND_UP() macro in the coh901327 WDT [WATCHDOG] Add support for WM831x watchdog [WATCHDOG] Add watchdog driver for NUC900 [WATCHDOG] add SBC-FITPC2 watchdog driver
| * | [WATCHDOG] Add support for WM831x watchdogMark Brown2009-09-181-0/+52
| |/ | | | | | | | | | | | | | | | | | | | | | | The WM831x series of devices provide a watchdog with configurable behaviour on timer expiry. Currently this driver support refreshes via a register or GPIO line and autonomous refreshes from a hardware source (eg, a clock). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | mfd: Convert WM8350 to use request_threaded_irq()Mark Brown2009-09-171-1/+0
| | | | | | | | | | | | | | Instead of hand rolling our own variant. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | regulator: AB3100 supportLinus Walleij2009-09-171-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the regulators found in the AB3100 Mixed-Signal IC. It further also defines platform data for the ST-Ericsson U300 platform and extends the AB3100 MFD driver so that platform/board data with regulation constraints and an init function can be passed down all the way from the board to the regulators. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Fix ab3100-otp build failureSamuel Ortiz2009-09-171-0/+1
| | | | | | | | | | | | ab3100.h should include linux/workqueue.h for otp to build properly. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Add Freescale MC13783 driverSascha Hauer2009-09-172-0/+480
| | | | | | | | | | | | | | | | | | This driver provides the core Freescale MC13783 support. It registers the client platform_devices and provides access to the A/D converter. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: AB3100 accessor function cleanupsLinus Walleij2009-09-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds the _interruptible suffix to the AB3100 accessor functions on par with mutex_lock_interruptible() that's used for blocking simultaneous calls to the AB3100 acessor functions. Since these accesses are slow on a 100kHz I2C bus and may line up waiting for the mutex, we need to handle interruption by system shutdown or kill signals and may just as well denote that in the function names. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | regulator: Add WM831x LDO supportMark Brown2009-09-171-0/+626
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WM831x series of devices provide three types of LDO: - General purpose LDOs supporting voltages from 0.9-3.3V - High performance analogue LDOs supporting voltages from 1-3.5V - Very low power consumption LDOs intended to support always on functionality. This patch adds support for all three kinds of LDO. Each regulator is probed as an individual platform device with resources used to provide the register map location of the regulator. Mixed hardware and software control of regulators is not current supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | regulator: Add WM831x DC-DC buck convertor supportMark Brown2009-09-171-0/+571
| | | | | | | | | | | | | | | | | | | | | | | | The WM831x series of devices all have 3 DC-DC buck convertors. This driver implements software control for these regulators via the regulator API. Use with split hardware/software control of individual regulators is not supported, though regulators not controlled by software may be controlled via the hardware control interfaces. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | input: Add support for the WM831x ON pinMark Brown2009-09-171-0/+19
| | | | | | | | | | | | | | | | | | | | The WM831x series of PMICs support control of initial power on through the ON pin on the device with soft control of the pin at other times. Represent this to userspace as KEY_POWER. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | gpio: Add WM831X GPIO driverMark Brown2009-09-171-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the GPIO pins on the WM831x. No direct support is currently supplied for configuring non-gpiolib functionality such as pull configuration and alternate functions, soft configuration of these will be provided in a future patch. Currently use of these pins as interrupts is not supported due to the ongoing issues with generic irq not support interrupt controllers on interrupt driven buses. Users can directly request the interrupts with the wm831x-specific APIs currently provided if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
OpenPOWER on IntegriCloud