summaryrefslogtreecommitdiffstats
path: root/include/linux/icmpv6.h
Commit message (Collapse)AuthorAgeFilesLines
* ipv6: RFC 4884 partial support for SIT/GRE tunnelsEric Dumazet2016-06-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | When receiving an ICMPv4 message containing extensions as defined in RFC 4884, and translating it to ICMPv6 at SIT or GRE tunnel, we need some extra manipulation in order to properly forward the extensions. This patch only takes care of Time Exceeded messages as they are the ones that typically carry information from various routers in a fabric during a traceroute session. It also avoids complex skb logic if the data_len is not a multiple of 8. RFC states : The "original datagram" field MUST contain at least 128 octets. If the original datagram did not contain 128 octets, the "original datagram" field MUST be zero padded to 128 octets. In practice routers use 128 bytes of original datagram, not more. Initial translation was added in commit ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: translate ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEEDEric Dumazet2016-06-181-1/+1
| | | | | | | | | | | For better traceroute/mtr support for SIT and GRE tunnels, we translate IPV4 ICMP ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED We also have to translate the IPv4 source IP address of ICMP message to IPv6 v4mapped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6: move ipip6_err_gen_icmpv6_unreach()Eric Dumazet2016-06-181-0/+1
| | | | | | | | | | | We want to use this helper from GRE as well, so this is the time to move it in net/ipv6/icmp.c Also add a @nhs parameter, since SIT and GRE have different values for the header(s) to skip. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: icmp: add a force_saddr param to icmp6_send()Eric Dumazet2016-06-181-1/+2
| | | | | | | | | | | SIT or GRE tunnels might want to translate an IPV4 address into a v4mapped one when translating ICMP to ICMPv6. This patch adds the parameter to icmp6_send() but does not change icmpv6_send() signature. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Kill ipv6 dependency of icmpv6_send().Pravin B Shelar2013-04-291-3/+15
| | | | | | | | | | | | | | Following patch adds icmp-registration module for ipv6. It allows ipv6 protocol to register icmp_sender which is used for sending ipv6 icmp msgs. This extra layer allows us to kill ipv6 dependency for sending icmp packets. This patch also fixes ip_tunnel compilation problem when ip_tunnel is statically compiled in kernel but ipv6 is module Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* UAPI: (Scripted) Disintegrate include/linuxDavid Howells2012-10-131-164/+1
| | | | | | | | | Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
* ipv6: Convert to use flowi6 where applicable.David S. Miller2011-03-121-2/+2
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: drop unused "dev" arg of icmpv6_send()Alexey Dobriyan2010-02-181-2/+1
| | | | | | | Dunno, what was the idea, it wasn't used for a long time. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: include/linux/icmpv6: includecheck fix for icmpv6.hJaswinder Singh Rajput2009-08-121-2/+0
| | | | | | | | | fix the following 'make includecheck' warning: include/linux/icmpv6.h: linux/skbuff.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Use correct data types for ICMPv6 type and codeBrian Haley2009-06-231-3/+3
| | | | | | | | | Change all the code that deals directly with ICMPv6 type and code values to use u8 instead of a signed int as that's the actual data type. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* headers_check fix: linux/icmpv6.hJaswinder Singh Rajput2009-01-301-0/+1
| | | | | | | | fix the following 'make headers_check' warning: usr/include/linux/icmpv6.h:8: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
* IPV6: Fix default gateway criteria wrt. HIGH/LOW preference radv optionPedro Ribeiro2008-10-151-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem observed: In IPv6, in the presence of multiple routers candidates to default gateway in one segment, each sending a different value of preference, the Linux hosts connected to the segment weren't selecting the right one in all the combinations possible of LOW/MEDIUM/HIGH preference. This patch changes two files: include/linux/icmpv6.h Get the "router_pref" bitfield in the right place (as RFC4191 says), named the bit left with this fix as "home_agent" (RFC3775 say that's his function) net/ipv6/ndisc.c Corrects the binary logic behind the updating of the router preference in the flags of the routing table Result: With this two fixes applied, the default route used by the system was to consistent with the rules mentioned in RFC4191 in case of changes in the value of preference in router advertisements Signed-off-by: Pedro Ribeiro <pribeiro@net.ipl.pt> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Fix powerpc allmodconfig build warnings.David S. Miller2008-03-051-0/+1
| | | | | | | | | | | | | Introduced by changeset 95e41e93e18d8e1e272ce23d96bae4f17ce11d42 ("[IPV6]: Make ndisc_flow_init() common for later use.") Reported by Stephen Rothwell. In file included from net/ipv6/netfilter/ip6_tables.c:21: include/linux/icmpv6.h:192: warning: 'struct in6_addr' declared inside parameter list include/linux/icmpv6.h:192: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Make ndisc_flow_init() common for later use.YOSHIFUJI Hideaki2008-03-041-0/+8
| | | | | | | For later use, this patch is renaming ndisc_flow_init() to icmpv6_flow_init() and putting it in common place. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [INET]: Remove struct net_proto_family* from _init calls.Denis V. Lunev2008-02-291-1/+1
| | | | | | | | | struct net_proto_family* is not used in icmp[v6]_init, ndisc_init, igmp_init and tcp_v4_init. Remove it. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_transport_header(skb)Arnaldo Carvalho de Melo2007-04-251-1/+1
| | | | | | | | | For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [ICMP6]: Introduce icmp6_hdr()Arnaldo Carvalho de Melo2007-04-251-0/+9
| | | | | | | For consistency with all the other skb->h.raw accessors. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Annotate checksums in on-the-wire packets.Al Viro2006-12-021-1/+1
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: annotate icmpv6 headersAl Viro2006-12-021-6/+6
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: ROUTE: Add support for Router Preference (RFC4191).YOSHIFUJI Hideaki2006-03-201-2/+9
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+171
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud