summaryrefslogtreecommitdiffstats
path: root/include/linux/hid.h
Commit message (Collapse)AuthorAgeFilesLines
* HID: yurex: recognize GeneralKeys wireless presenter as generic HIDTomoki Sekiyama2011-06-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unfortunately, the device seems to have the same Vendor ID and Product ID as YUREX leg-shakes sensors, and the commit 6bc235a2e2 ("USB: add driver for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list. I believe that we can distinguish YUREX and the Wireless Presenter by device type. The patch below makes the driver ignore only YUREX (bInterfaceProtocol==0), and recognize Wireless Presenter (bInterfaceProtocol is keyboard or mouse) as generic HID. (I don't have the Wireless Presenter, so not yet ested.) ** YUREX lsusb information: Bus 002 Device 007: ID 0c45:1010 Microdia Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0c45 Microdia idProduct 0x1010 bcdDevice 0.03 iManufacturer 1 JESS iProduct 2 YUREX iSerial 3 10000269 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 31 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922 Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Greg KH <gregkh@suse.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Reported-by: Thomas B?chler <thomas@archlinux.org> Tested-by: Thomas B?chler <thomas@archlinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
*-. Merge branches 'dragonrise', 'hidraw-feature', 'multitouch', 'ntrig', ↵Jiri Kosina2011-03-171-1/+4
|\ \ | | | | | | | | | 'roccat', 'upstream' and 'upstream-fixes' into for-linus
| | * HID: Do not create input devices for feature reportsHenrik Rydberg2011-03-011-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | When the multi input quirk is set, there is a new input device created for every feature report. Since the idea is to present features per hid device, not per input device, revert back to the original report loop and change the feature_mapping() callback to not take the input device as argument. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Benjamin Tissoires <benjmain.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: Add Support for Setting and Getting Feature Reports from hidrawAlan Ott2011-02-111-0/+3
|/ | | | | | | | | | | | | | | | Per the HID Specification, Feature reports must be sent and received on the Configuration endpoint (EP 0) through the Set_Report/Get_Report interfaces. This patch adds two ioctls to hidraw to set and get feature reports to and from the device. Modifications were made to hidraw and usbhid. New hidraw ioctls: HIDIOCSFEATURE - Perform a Set_Report transfer of a Feature report. HIDIOCGFEATURE - Perform a Get_Report transfer of a Feature report. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-01-131-1/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-multitouch: minor fixes based on additional review HID: Switch turbox/mosart touchscreen to hid-mosart HID: add Add Cando touch screen 10.1-inch product id HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger' HID: hid-multitouch: add support for Cypress TrueTouch panels HID: hid-multitouch: support for PixCir-based panels HID: set HID_MAX_FIELD at 128 HID: add feature_mapping callback
| * HID: set HID_MAX_FIELD at 128Benjamin Tissoires2011-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Stantums multitouch panels sends more than 64 reports and this results in not being able to handle all the touches given by this device. This patch is required to be able to include Stantum panels in the unified hid-multitouch driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: add feature_mapping callbackBenjamin Tissoires2011-01-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently hid doesn't export the features it knows to the specific modules. Some information can be really important in such features: MosArt and Cypress devices are by default not in a multitouch mode. We have to send the value 2 on the right feature. This patch exports to the module the features report so they can find the right feature to set up the correct mode. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: Add and use hid_<level>: dev_<level> equivalentsJoe Perches2010-12-101-6/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Neaten current uses of dev_<level> by adding and using hid specific hid_<level> macros. Convert existing uses of dev_<level> uses to hid_<level>. Convert hid-pidff printk uses to hid_<level>. Remove err_hid and use hid_err instead. Add missing newlines to logging messages where necessary. Coalesce format strings. Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt Other miscellaneous changes: Add const struct hid_device * argument to hid-core functions extract() and implement() so hid_<level> can be used by them. Fix bad indentation in hid-core hid_input_field function that calls extract() function above. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: add hid_hw_open/close/power() handlersDmitry Torokhov2010-12-081-0/+43
|/ | | | | | | | Instead of exposing the guts of hid->ll_driver relationship to HID sub-drivers provide these helpers to encapsulate the details. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'uc-logic' into for-linusJiri Kosina2010-10-231-2/+2
|\ | | | | | | | | | | | | Conflicts: drivers/hid/hid-ids.h drivers/hid/hid-lg.c drivers/hid/usbhid/hid-quirks.c
| * HID: allow resizing and replacing report descriptorsNikolai Kondrashov2010-08-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Update hid_driver's report_fixup prototype to allow changing report descriptor size and/or returning completely different report descriptor. Update existing usage accordingly. This is to give more freedom in descriptor fixup and to allow having a whole fixed descriptor in the code for the sake of readability. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: Add a hid quirk for input sync overrideHenrik Rydberg2010-09-211-0/+1
|/ | | | | | | | | | As of lately, HID devices which send per-frame data split over several HID reports have started to emerge. This patch adds a quirk which allows the HID driver to take over the input layer synchronization, and hence the control of the frame boundary. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: add HID_QUIRK_HIDINPUT_FORCEDaniel Mack2010-07-191-0/+1
| | | | | | | | | | | For devices with exotic HID report descriptors, it might be necessary to make the HID core force the registration of an input device. Make that possible by introducing a new quirk type. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*-. Merge branches 'upstream-fixes', 'bkl-removal', 'debugfs-fixes' and ↵Jiri Kosina2010-05-191-0/+8
|\ \ | | | | | | | | | 'hid-suspend' into for-linus
| | * HID: add suspend/resume hooks for hid driversBruno Prémont2010-04-271-0/+8
| |/ | | | | | | | | | | | | | | Add suspend/resume hooks for HID drivers so these can do some additional state adjustment when device gets suspended/resumed. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNOREBastien Nocera2010-04-191-0/+2
|/ | | | | | | | | | | | | | | | | | Add two quirks to make it possible for usbhid module options to override whether a device is ignored (HID_QUIRK_NO_IGNORE) and whether to connect a hiddev device (HID_QUIRK_HIDDEV_FORCE). Passing HID_QUIRK_NO_IGNORE for your device means that it will not be ignored by the HID layer, even if present in a blacklist. HID_QUIRK_HIDDEV_FORCE will force the creation of a hiddev for that device, making it accessible from user-space. Tested with an Apple IR Receiver, switching it from using appleir to using lirc's macmini driver. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branches 'upstream', 'raw_report_modifications' and ↵Jiri Kosina2010-02-251-1/+2
|\ | | | | | | | | | | | | 'apple_magic_mouse' into for-linus Conflicts: drivers/hid/Kconfig
| * HID: Export hid_register_reportMichael Poole2010-02-101-0/+1
| | | | | | | | | | | | | | | | | | | | The Apple Magic Mouse (and probably other devices) publish reports that are not called out in their HID report descriptors -- they only send them when enabled through other writes to the device. This allows a driver to handle these unlisted reports. Signed-off-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: make raw reports possible for both feature and output reportsJiri Kosina2010-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 2da31939a42 ("Bluetooth: Implement raw output support for HIDP layer"), support for Bluetooth hid_output_raw_report was added, but it pushes the data to the intr socket instead of the ctrl one. This has been fixed by 6bf8268f9a91f1 ("Bluetooth: Use the control channel for raw HID reports") Still, it is necessary to distinguish whether the report in question should be either FEATURE or OUTPUT. For this, we have to extend the generic HID API, so that hid_output_raw_report() callback provides means to specify this value so that it can be passed down to lower level hardware drivers (currently Bluetooth and USB). Based on original patch by Bastien Nocera <hadess@hadess.net> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: let hid-input accept digitizersStephane Chatty2010-01-171-1/+1
|/ | | | | | | | Extended IS_INPUT_APPLICATION to accept digitzers that are actual input devices (touchscreens, light pens, touch pads, white boards) Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: fixup quirk for NCR devicesJiri Kosina2009-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | NCR devices are terminally broken by design -- they claim themselves to contain proper input applications in their HID report descriptor, but behave very badly if treated in standard way. According to NCR developers, the devices get confused when queried for reports in a standard way, rendering them unusable. NCR is shipping application called "RPSL" that can be used to drive these devices through hiddev, under the assumption that in-kernel driver doesn't perform initial report query. If it does, neither in-kernel nor hiddev-based driver can operate with these devices any more. Introduce a quirk that skips the report query for all NCR devices. The previous NOGET quirk was wrong and had been introduced because I misunderstood the nature of brokenness of these devices. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: consolidate connect and disconnect into core codeJiri Kosina2009-09-171-0/+3
| | | | | | | | | | | HID core registers input, hidraw and hiddev devices, but leaves unregistering it up to the individual driver, which is not really nice. Let's move all the logic to the core. Reported-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Brian Rogers <brian@xyzw.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branches 'upstream', 'upstream-fixes' and 'debugfs' into for-linusJiri Kosina2009-09-131-14/+8
|\
| * HID: use debugfs for events/reports dumpingJiri Kosina2009-06-121-18/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: use debugfs for report dumping descriptorJiri Kosina2009-06-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: add new multitouch and digitizer contantsStephane Chatty2009-05-201-0/+36
|/ | | | | | | | | | | Added constants to hid.h for all digitizer usages (including the new multitouch ones that are not yet in the official USB spec but are being pushed by Microsft as described in their paper "Digitizer Drivers for Windows Touch and Pen-Based Computers"). Updated hid-debug.c to support the new MT input constants such as ABS_MT_POSITION_X. Signed-off-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'autosuspend' into for-nextJiri Kosina2009-03-301-0/+6
|\ | | | | | | | | | | Conflicts: drivers/hid/hid-core.c
| * HID: autosuspend support for USB HIDOliver Neukum2009-03-251-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This uses the USB busy mechanism for aggessive autosuspend of USB HID devices. It autosuspends all opened devices supporting remote wakeup after a timeout unless - output is being done to the device - a key is being held down (remote wakeup isn't triggered upon key release) - LED(s) are lit - hiddev is opened As in the current driver closed devices will be autosuspended even if they don't support remote wakeup. The patch is quite large because output to devices is done in hard interrupt context meaning a lot a queuing and locking had to be touched. The LED stuff has been solved by means of a simple counter. Additions to the generic HID code could be avoided. In addition it now covers hidraw. It contains an embryonic version of an API to let the generic HID code tell the lower levels which capabilities with respect to power management are needed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: remove compat stuffJiri Slaby2009-03-301-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This removal was scheduled and there is no problem with later distros to adapt for the new bus, thanks to aliases. module-init-tools map files are deprecated nowadays, so that the patch which introduced hid ones into the m-i-t won't be accepted and hence there is no reason for leaving compat stuff in. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: bring back possibility to specify vid/pid ignore on module loadJiri Kosina2009-03-301-0/+1
|/ | | | | | | | | | | | | | | | When hid quirks were converted to specialized driver, the HID_QUIRK_IGNORE has been moved completely, as the hid_ignore_list[] has been moved into the generic code. However userspace already got used to the possibility that modprobing usbhid with 'quirks=vid:pid:0x4' makes the device ignored by usbhid driver. So keep this quirk flag in place for backwards compatibility. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* headers_check fix: linux/hid.hJaswinder Singh Rajput2009-01-301-0/+2
| | | | | | | | | fix the following 'make headers_check' warnings: usr/include/linux/hid.h:69: extern's make no sense in userspace usr/include/linux/hid.h:76: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
* HID: avoid sparse warning in HID_COMPAT_LOAD_DRIVERHannes Eder2009-01-041-0/+2
| | | | | | | | | | | Impact: include a prototype for the exported function in the macro Fix about 20 of this warnings: drivers/hid/hid-a4tech.c:162:1: warning: symbol 'hid_compat_a4tech' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: add dynids facilityJiri Slaby2009-01-041-0/+5
| | | | | | | | | | | | | Allow adding new devices to the hid drivers on the fly without a need of kernel recompilation. Now, one can test a driver e.g. by: echo 0003:045E:00F0.0003 > ../generic-usb/unbind echo 0003 045E 00F0 > new_id from some driver subdir. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move usbhid flags to usbhid.hJiri Slaby2009-01-041-9/+0
| | | | | | | Move usbhid specific flags from global hid.h into local usbhid.h. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: fix oops during suspend of unbound HID devicesJiri Slaby2008-10-271-0/+1
| | | | | | | | | | | | | | | | | Usbhid structure is allocated on start invoked only from probe of some driver. When there is no driver, the structure is null and causes null-dereference oopses. Fix it by allocating the structure on probe and disconnect of the device itself. Also make sure we won't race between start and resume or stop and suspend respectively. References: http://bugzilla.kernel.org/show_bug.cgi?id=11827 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Andreas Schwab <schwab@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: add hid_type to general hid structJiri Slaby2008-10-221-0/+6
| | | | | | | | | | | | Add type to the hid structure to distinguish to which device type (now only mouse) we are talking to. Needed for per device type ignore list support. Note: this patch leaves the type as unknown for bluetooth devices, there is not support for this in the hidp code. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: fix a lockup regression when using force feedback on a PID deviceAnssi Hannula2008-10-141-0/+6
| | | | | | | | | | | | | | | | | | | | | | | Commit 8006479c9b75fb6594a7b746af3d7f1fbb68f18f introduced a spinlock in input_dev->event_lock, which is locked when handling input events. However, the hid-pidff driver sleeps when handling events as it waits for reports being sent to the device before changing the report contents again. This causes a system lockup when trying to use force feedback with a PID device, a regression introduced in 2.6.24 and 2.6.23.15. Fix it by extracting the raw report data from struct hid_report immediately when hid_submit_report() is called, therefore allowing drivers to change the contents of struct hid_report immediately without affecting the already-queued transfer. In hid-pidff, re-add the removed usbhid_wait_io() to pidff_erase_effect() instead, to prevent a full report queue from causing the submission to fail, thus not freeing up device memory. pidff_erase_effect() is not called while dev->event_lock is held. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: remove hid-ffJiri Slaby2008-10-141-8/+1
| | | | | | | | hid-ff.c now calls only pidff (generic driver), the special ones are now in separate drivers. Invoke pidff on all non-special directly. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move zeroplus FF processingJiri Slaby2008-10-141-1/+0
| | | | | Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move thrustmaster FF processingJiri Slaby2008-10-141-1/+0
| | | | | Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move pantherlord FF processingJiri Slaby2008-10-141-1/+0
| | | | | | | | | Move the force feedback processing into a separate module. [jkosina@suse.cz: fix Kconfig texts a little bit] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move logitech FF processingJiri Slaby2008-10-141-2/+0
| | | | | | | | Merge the logitech force feedback processing directly into logitech driver from the usbhid core. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move reset leds quirkJiri Slaby2008-10-141-1/+1
| | | | | | | | Move the handling of the leds resetting from the core to the dell and logitech drivers. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move connect quirksJiri Slaby2008-10-141-7/+30
| | | | | | | | | Move connecting from usbhid to the hid layer and fix also hidp in that manner. This removes all the ignore/force hidinput/hiddev connecting quirks. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move sony quirksJiri Slaby2008-10-141-1/+0
| | | | | Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: remove rdesc quirk supportJiri Slaby2008-10-141-1/+0
| | | | | | | | | Remove support for both dynamic and static report descriptor quirks. There is no longer rdesc code which it would support, so it's useless. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: remove hid-input-quirksJiri Slaby2008-10-141-3/+0
| | | | | | | Remove the file since these is no user now. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move samsung quirksJiri Slaby2008-10-141-6/+0
| | | | | Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move monterey quirksJiri Slaby2008-10-141-1/+0
| | | | | Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
OpenPOWER on IntegriCloud