summaryrefslogtreecommitdiffstats
path: root/include/linux/firewire.h
Commit message (Collapse)AuthorAgeFilesLines
* firewire: don't use PREPARE_DELAYED_WORKTejun Heo2014-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57be8d9 "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel@lists.sourceforge.net Cc: stable@vger.kernel.org # v3.9+ Cc: stable@vger.kernel.org # v3.8.2+ Cc: stable@vger.kernel.org # v3.4.60+ Cc: stable@vger.kernel.org # v3.2.40+
* firewire: fix libdc1394/FlyCap2 iso event regressionClemens Ladisch2013-07-271-0/+1
| | | | | | | | | | | | | | | | | Commit 18d627113b83 (firewire: prevent dropping of completed iso packet header data) was intended to be an obvious bug fix, but libdc1394 and FlyCap2 depend on the old behaviour by ignoring all returned information and thus not noticing that not all packets have been received yet. The result was that the video frame buffers would be saved before they contained the correct data. Reintroduce the old behaviour for old clients. Tested-by: Stepan Salenikovich <stepan.salenikovich@gmail.com> Tested-by: Josep Bosch <jep250@gmail.com> Cc: <stable@vger.kernel.org> # 3.4+ Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: introduce fw_driver.probe and .remove methodsStefan Richter2013-06-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | FireWire upper layer drivers are converted from generic struct driver.probe() and .remove() to bus-specific struct fw_driver.probe() and .remove(). The new .probe() adds a const struct ieee1394_device_id *id argument, indicating the entry in the driver's device identifiers table which matched the fw_unit to be probed. This new argument is used by the snd-firewire-speakers driver to look up device-specific parameters and methods. There is at least one other FireWire audio driver currently in development in which this will be useful too. The new .remove() drops the unused error return code. Although all in-tree drivers are being converted to the new methods, support for the old methods is left in place in this commit. This allows public developer trees to merge this commit and then move to the new fw_driver methods. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de> (for sound/firewire/) Cc: Peter Hurley <peter@hurleysoftware.com> (for drivers/staging/fwserial/)
* firewire: addendum to address handler RCU conversionStefan Richter2012-09-281-2/+10
| | | | | | | | | | | | | | | | | | | | | | Follow up on commit c285f6ff6787 "firewire: remove global lock around address handlers, convert to RCU": - address_handler_lock no longer serializes the address handler, only its function to serialize updates to the list of handlers remains. Rename the lock to address_handler_list_lock. - Callers of fw_core_remove_address_handler() must be able to sleep. Comment on this in the API documentation. - The counterpart fw_core_add_address_handler() is by nature something which is used in process context. Replace spin_lock_bh() by spin_lock() in fw_core_add_address_handler() and in fw_core_remove_address_handler(), and document that process context is now required for fw_core_add_address_handler(). - Extend the documentation of fw_address_callback_t. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* Merge tag 'firewire-updates' of ↵Linus Torvalds2012-07-301-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: - Small fixes and optimizations. - A new sysfs attribute to tell local and remote nodes apart. Useful to set special permissions/ ownership of local nodes' /dev/fw*, to start daemons on them (for diagnostics, management, AV targets, VersaPHY initiator or targets...), to pick up their GUID to use it as GUID of an SBP2 target instance, and of course for informational purposes. * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: document is_local sysfs attribute firewire: core: add is_local sysfs device attribute firewire: ohci: initialize multiChanMode bits after reset firewire: core: fix multichannel IR with buffers larger than 2 GB firewire: ohci: sanity-check MMIO resource firewire: ohci: lazy bus time initialization firewire: core: allocate the low memory region firewire: core: make address handler length 64 bits
| * firewire: core: add is_local sysfs device attributeClemens Ladisch2012-06-301-1/+1
| | | | | | | | | | | | | | | | | | Making this information available in sysfs allows to differentiate between controllers in the local and remote Linux PCs, and thus is useful for servers that are started with udev rules. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * firewire: core: make address handler length 64 bitsClemens Ladisch2012-05-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The type of the length field of the fw_address_handler structure was size_t, which restricted it to 32 bits on 32-bit architectures. While making it u32 would match the userspace API, all calculations on this field use 64 bits anyway, and the ability to use 4 GB or larger address ranges is useful in the kernel. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | Merge tag 'firewire-updates' of ↵Linus Torvalds2012-05-241-0/+2
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter: - Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization direction (was correct) of isochronous reception buffers of userspace drivers if vma-mapped for R/W access. For example, libdc1394 was affected. - more consistent retry stategy in device discovery/ rediscovery, and improved failure diagnostics - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2 * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: document the absence of alignment requirements firewire: sbp2: remove superfluous blk_queue_max_segment_size() call firewire: sbp2: use scsi_dma_(un)map firewire: sbp2: give correct DMA device to scsi framework firewire: core: fw_device_refresh(): clean up error handling firewire: core: log config rom reading errors firewire: core: log error in case of failed bus manager lock firewire: move rcode_string() to core firewire: core: improve reread_config_rom() interface firewire: core: wait for inaccessible devices after bus reset firewire: ohci: omit spinlock IRQ flags where possible firewire: ohci: correct signedness of a local variable firewire: core: fix DMA mapping direction firewire: use module_pci_driver
| * firewire: move rcode_string() to coreClemens Ladisch2012-04-171-0/+1
| | | | | | | | | | | | | | | | There is nothing audio-specific about the rcode_string() helper, so move it from snd-firewire-lib into firewire-core to allow other code to use it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed sound/firewire/cmp.c)
| * firewire: core: fix DMA mapping directionStefan Richter2012-04-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Seen with recent libdc1394: If a client mmap()s the buffer of an isochronous reception buffer with PROT_READ|PROT_WRITE instead of just PROT_READ, firewire-core sets the wrong DMA mapping direction during buffer initialization. The fix is to split fw_iso_buffer_init() into allocation and DMA mapping and to perform the latter after both buffer and DMA context were allocated. Buffer allocation and context allocation may happen in any order, but we need the context type (reception or transmission) in order to set the DMA direction of the buffer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | firewire: Move fw_card kref functions into linux/firewire.hChris Boot2012-05-091-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When writing a firewire driver that doesn't deal with struct fw_device objects (e.g. it only publishes FireWire units and doesn't subscribe to them), you likely need to keep referenced to struct fw_card objects so that you can send messages to other nodes. This patch moves fw_card_put(), fw_card_get() and fw_card_release() into the public include/linux/firewire.h header instead of drivers/firewire/core.h, and adds EXPORT_SYMBOL_GPL(fw_card_release). The firewire-sbp-target module requires these so it can keep a reference to the fw_card object in order that it can fetch ORBs to execute and read/write related data and status information. Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* | firewire: Add function to get speed from opaque struct fw_requestChris Boot2012-05-091-0/+1
|/ | | | | | | | | | | | | | | | | | | | | Sometimes it's useful to know the FireWire speed of the request that has just come in to a fw_address_handler callback. As struct fw_request is opaque we can't peek inside to get the speed out of the struct fw_packet that's just inside. For example, the SBP-2 spec says: "The speed at which the block write request to the MANAGEMENT_AGENT register is received shall determine the speed used by the target for all subsequent requests to read the initiator’s configuration ROM, fetch ORB’s from initiator memory or store status at the initiator’s status_FIFO. Command block ORB’s separately specify the speed for requests addressed to the data buffer or page table." [ ANSI T10/1155D Revision 4 page 53/54 ] Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* firewire: restore the device.h include in linux/firewire.hPaul Gortmaker2012-04-021-2/+1
| | | | | | | | | | | | | | Commit 313162d0b838 ("device.h: audit and cleanup users in main include dir") exchanged an include <linux/device.h> for a struct *device but in actuality I misread this file when creating 313162d and it should have remained an include. There were no build regressions since all consumers were already getting device.h anyway, but make it right regardless. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'device-for-3.4' of ↵Linus Torvalds2012-03-241-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/device.h> avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit <linux/device.h> users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)
| * device.h: audit and cleanup users in main include dirPaul Gortmaker2012-03-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | firewire: allow explicit flushing of iso packet completionsClemens Ladisch2012-03-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | Extend the kernel and userspace APIs to allow reporting all currently completed isochronous packets, even if the next interrupt packet has not yet been reached. This is required to determine the status of the packets at the end of a paused or stopped stream, and useful for more precise synchronization of audio streams. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | firewire: core: prefix log messages with card nameStefan Richter2012-02-221-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Associate all log messages from firewire-core with the respective card because some people have more than one card. E.g. firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core: created device fw0: GUID 0814438400000389, S800 firewire_core: phy config: new root=ffc1, gap_count=5 firewire_core: created device fw1: GUID 0814438400000388, S800 firewire_core: created device fw2: GUID 0001d202e06800d1, S800 turns into firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800 firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5 firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800 firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800 This increases the module size slightly; to keep this in check, turn the former printk wrapper macros into functions. Their implementation is largely copied from driver core's dev_printk counterparts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | firewire: move fw_device reference counting from drivers to coreStefan Richter2012-01-151-12/+0
|/ | | | | | | | | | fw_unit device drivers invariably need to talk to the fw_unit's parent (an fw_device) and grandparent (an fw_card). firewire-core already maintains an fw_card reference for the entire lifetime of an fw_device. Likewise, let firewire-core maintain an fw_device reference for the entire lifetime of an fw_unit so that fw_unit drivers don't have to. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* atomic: use <linux/atomic.h>Arun Sharma2011-07-261-1/+1
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* firewire: sbp2: parallelize login, reconnect, logoutStefan Richter2011-05-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The struct sbp2_logical_unit.work items can all be executed in parallel but are not reentrant. Furthermore, reconnect or re-login work must be executed in a WQ_MEM_RECLAIM workqueue. Hence replace the old single-threaded firewire-sbp2 workqueue by a concurrency-managed but non-reentrant workqueue with rescuer. firewire-core already maintains one, hence use this one. In earlier versions of this change, I observed occasional failures of parallel INQUIRY to an Initio INIC-2430 FireWire 800 to dual IDE bridge. More testing indicates that parallel INQUIRY is not actually a problem, but too quick successions of logout and login + INQUIRY, e.g. a quick sequence of cable plugout and plugin, can result in failed INQUIRY. This does not seem to be something that should or could be addressed by serialization. Another dual-LU device to which I currently have access to, an OXUF924DSB FireWire 800 to dual SATA bridge with firmware from MacPower, has been successfully tested with this too. This change is beneficial to environments with two or more FireWire storage devices, especially if they are located on the same bus. Management tasks that should be performed as soon and as quickly as possible, especially reconnect, are no longer held up by tasks on other devices that may take a long time, especially login with INQUIRY and sd or sr driver probe. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: optimize iso queueing by setting wake only after the last packetClemens Ladisch2011-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | When queueing iso packets, the run time is dominated by the two MMIO accesses that set the DMA context's wake bit. Because most drivers submit packets in batches, we can save much time by removing all but the last wakeup. The internal kernel API is changed to require a call to fw_iso_context_queue_flush() after a batch of queued packets. The user space API does not change, so one call to FW_CDEV_IOC_QUEUE_ISO must specify multiple packets to take advantage of this optimization. In my measurements, this patch reduces the time needed to queue fifty skip packets from userspace to one sixth on a 2.5 GHz CPU, or to one third at 800 MHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: octlet AT payloads can be stack-allocatedStefan Richter2011-05-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | We do not need slab allocations anymore in order to satisfy streaming DMA mapping constraints, thanks to commit da28947e7e36 "firewire: ohci: avoid separate DMA mapping for small AT payloads". (Besides, the slab-allocated buffers that firewire-core, firewire-sbp2, and firedtv used to provide for 8-byte write and lock requests were still not fully portable since they crossed cacheline boundaries or shared a cacheline with unrelated CPU-accessed data. snd-firewire-lib got this aspect right by using an extra kmalloc/ kfree just for the 8-byte transaction buffer.) This change replaces kmalloc'ed lock transaction scratch buffers in firewire-core, firedtv, and snd-firewire-lib by local stack allocations. Perhaps the most notable result of the change is simpler locking because there is no need to serialize usages of preallocated per-device buffers anymore. Also, allocations and deallocations are simpler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-03-211-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: ignore link-active bit of new nodes, fix device recognition firewire: sbp2: revert obsolete 'fix stall with "Unsolicited response"' firewire: core: increase default SPLIT_TIMEOUT value firewire: ohci: Misleading kfree in ohci.c::pci_probe/remove firewire: ohci: omit IntEvent.busReset check rom AT queueing firewire: ohci: prevent starting of iso contexts with empty queue firewire: ohci: prevent iso completion callbacks after context stop firewire: core: rename some variables firewire: nosy: should work on Power Mac G4 PCI too firewire: core: fix card->reset_jiffies overflow firewire: cdev: remove unneeded reference firewire: cdev: always wait for outbound transactions to complete firewire: cdev: remove unneeded idr_find() from complete_transaction() firewire: ohci: log dead DMA contexts
| * firewire: core: fix card->reset_jiffies overflowClemens Ladisch2011-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | On a 32-bit machine with, e.g., HZ=1000, jiffies will overflow after about 50 days, so if there are between 25 and 50 days between bus resets, the card->reset_jiffies comparisons can get wrong results. To fix this, ensure that this timestamp always uses 64 bits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de>
* | ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driverClemens Ladisch2011-03-151-0/+7
|/ | | | | | | | | | | | | | | | | | | Add a driver for two playback-only FireWire devices based on the OXFW970 chip. v2: better AMDTP API abstraction; fix fw_unit leak; small fixes v3: cache the iPCR value v4: FireWave constraints; fix fw_device reference counting; fix PCR caching; small changes and fixes v5: volume/mute support; fix crashing due to pcm stop races v6: fix build; one-channel volume for LaCie v7: use signed values to make volume (range checks) work; fix function block IDs for volume/mute; always use channel 0 for LaCie volume Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* firewire: use split transaction timeout only for split transactionsClemens Ladisch2011-01-041-1/+1
| | | | | | | | | | | Instead of starting the split transaction timeout timer when any request is submitted, start it only when the destination's ACK_PENDING has been received. This prevents us from using a timeout that is too short, and, if the controller's AT queue is emptying very slowly, from cancelling a packet that has not yet been sent. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: add isochronous multichannel receptionStefan Richter2010-07-291-10/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the DMA context programming and userspace ABI for multichannel reception, i.e. for listening on multiple channel numbers by means of a single DMA context. The use case is reception of more streams than there are IR DMA units offered by the link layer. This is already implemented by the older ohci1394 + ieee1394 + raw1394 stack. And as discussed recently on linux1394-devel, this feature is occasionally used in practice. The big drawbacks of this mode are that buffer layout and interrupt generation necessarily differ from single-channel reception: Headers and trailers are not stripped from packets, packets are not aligned with buffer chunks, interrupts are per buffer chunk, not per packet. These drawbacks also cause a rather hefty code footprint to support this rarely used OHCI-1394 feature. (367 lines added, among them 94 lines of added userspace ABI documentation.) This implementation enforces that a multichannel reception context may only listen to channels to which no single-channel context on the same link layer is presently listening to. OHCI-1394 would allow to overlay single-channel contexts by the multi-channel context, but this would be a departure from the present first-come-first-served policy of IR context creation. The implementation is heavily based on an earlier one by Jay Fenlason. Thanks Jay. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: cdev: add PHY packet receptionStefan Richter2010-07-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl() and FW_CDEV_EVENT_PHY_PACKET_RECEIVED poll()/read() event for /dev/fw*. This can be used to get information from remote PHYs by remote access PHY packets. This is also the 2nd half of the functionality (the receive part) to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts, hence some kind of elevated privileges should be required of a process to be able to listen in on PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. Other limitations: - PHY packet reception may be switched on by ioctl() but cannot be switched off again. It would be trivial to provide an off switch, but this is not worth the code. The client should simply close() the fd then, or just ignore further events. - For sake of simplicity of API and kernel-side implementation, no filter per packet content is provided. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: normalize status values in packet callbacksStefan Richter2010-07-231-4/+4
| | | | | | | | | | | | | | | | | | core-transaction.c transmit_complete_callback() and close_transaction() expect packet callback status to be an ACK or RCODE, and ACKs get translated to RCODEs for transaction callbacks. An old comment on the packet callback API (been there from the initial submission of the stack) and the dummy_driver implementation of send_request/send_response deviated from this as they also included -ERRNO in the range of status values. Let's narrow status values down to ACK and RCODE to prevent surprises. RCODE_CANCELLED is chosen as the dummy_driver's RCODE as its meaning of "transaction timed out" comes closest to what happens when a transaction coincides with card removal. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: core: integrate software-forced bus resets with bus managementStefan Richter2010-07-131-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Bus resets which are triggered - by the kernel drivers after updates of the local nodes' config ROM, - by userspace software via ioctl shall be deferred until after >=2 seconds after the last bus reset. If multiple modifications of the local nodes' config ROM happen in a row, only a single bus reset should happen after them. When the local node's link goes from inactive to active or vice versa, and at the two occasions of bus resets mentioned above --- and if the current gap count differs from 63 --- the bus reset should be preceded by a PHY configuration packet that reaffirms the gap count. Otherwise a bus manager would have to reset the bus again right after that. This is necessary to promote bus stability, e.g. leave grace periods for allocations and reallocations of isochronous channels and bandwidth, SBP-2 reconnections etc.; see IEEE 1394 clause 8.2.1. This change implements all of the above by moving bus reset initiation into a delayed work (except for bus resets which are triggered by the bus manager workqueue job and are performed there immediately). It comes with a necessary addition to the card driver methods that allows to get the current gap count from PHY registers. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: cdev: fix fw_cdev_event_bus_reset.bm_node_idStefan Richter2010-07-081-0/+1
| | | | | | | | Fix an obscure ABI feature that is a bit of a hassle to implement. However, somebody put it into the ABI, so let's fill in a sensible value there. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: remove an unused function argumentStefan Richter2010-06-201-1/+1
| | | | | | | | | | | | | void (*fw_address_callback_t)(..., int speed, ...) is the speed that a remote node chose to transmit a request to us. In case of split transactions, firewire-core will transmit the response at that speed. Upper layer drivers on the other hand (firewire-net, -sbp2, firedtv, and userspace drivers) cannot do anything useful with that speed datum, except log it for debug purposes. But data that is merely potentially (not even actually) used for debug purposes does not belong into the API. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: normalize STATE_CLEAR/SET CSR access interfaceStefan Richter2010-06-191-2/+1
| | | | | | | | Push the maintenance of STATE_CLEAR/SET.abdicate down into the card driver. This way, the read/write_csr_reg driver method works uniformly across all CSR offsets. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: replace get_features card driver hookStefan Richter2010-06-191-0/+3
| | | | | | | | | | | | | by feature variables in the fw_card struct. The hook appeared to be an unnecessary abstraction in the card driver interface. Cleaner would be to pass those feature flags as arguments to fw_card_initialize() or fw_card_add(), but the FairnessControl register is in the SCLK domain and may therefore not be accessible while Link Power Status is off, i.e. before the card->driver->enable call from fw_card_add(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: core: add CSR abdicate supportClemens Ladisch2010-06-101-0/+2
| | | | | | | | | Implement the abdicate bit, which is required for bus manager capable nodes and tested by the Base 1394 Test Suite. Finally, something to do at a command reset! :-) Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* firewire: core: add CSR MAINT_UTILITY supportClemens Ladisch2010-06-101-0/+3
| | | | | | | | Implement the MAIN_UTILITY register, which is utterly optional but useful as a safe target for diagnostic read/write/broadcast transactions. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* firewire: add CSR PRIORITY_BUDGET supportClemens Ladisch2010-06-101-0/+1
| | | | | | | | | | | If supported by the OHCI controller, implement the PRIORITY_BUDGET register, which is required for nodes that can use asynchronous priority arbitration. To allow the core to determine what features the lowlevel device supports, add a new card driver callback. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* firewire: core: add CSR SPLIT_TIMEOUT supportClemens Ladisch2010-06-101-0/+5
| | | | | | | | Implement the SPLIT_TIMEOUT registers. Besides being required by the spec, this is desirable for some IIDC devices and necessary for many audio devices to be able to increase the timeout from userspace. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* firewire: core: use separate timeout for each transactionClemens Ladisch2010-05-191-1/+2
| | | | | | | | | | | Using a single timeout for all transaction that need to be flushed does not work if the submission of new transactions can defer the timeout indefinitely into the future. We need to have timeouts that do not change due to other transactions; the simplest way to do this is with a separate timer for each transaction. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (+ one lockdep annotation)
* firewire: core: clean up config ROM related defined constantsStefan Richter2010-04-191-2/+0
| | | | | | | | | | | | | | | | | Clemens Ladisch pointed out that - BIB_IMC is not named like the field is called in the standard, - readers of the code may get worried about the magic 0x0c0083c0, - a CSR_NODE_CAPABILITIES key is there in the header but not put to good use. So let's rename BIB_IMC, add a defined constant for Node_Capabilities and a comment which reassures people that somebody thought about it and they don't have to (or if they still do, tell them where they have to look for confirmation), and prune our incomplete and arbitrary set of defined constants of CSR key IDs. And there is a nother magic number, that of Bus_Information_Block.Bus_Name, to be defined and commented. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: qualify config ROM cache pointers as const pointersStefan Richter2009-12-291-6/+6
| | | | | | | | Several config ROM related functions only peek at the ROM cache; mark their arguments as const pointers. Ditto fw_device.config_rom and fw_unit.directory, as the memory behind them is meant to be write-once. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: core: fw_csr_string addendumStefan Richter2009-12-291-1/+0
| | | | | | Witespace and comment changes, and a different way to say i + 1 < end. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: add fw_csr_string() helper functionClemens Ladisch2009-12-291-0/+2
| | | | | | | | | | The core (sysfs attributes), the firedtv driver, and possible future drivers all read strings from some configuration ROM directory. Factor out the generic code from show_text_leaf() into a new helper function, modified slightly to handle arbitrary buffer sizes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: fix use of multiple AV/C devices, allow multiple FCP listenersClemens Ladisch2009-12-291-2/+2
| | | | | | | | | | | | | | | | | | | Control of more than one AV/C device at once --- e.g. camcorders, tape decks, audio devices, TV tuners --- failed or worked only unreliably, depending on driver implementation. This affected kernelspace and userspace drivers alike and was caused by firewire-core's inability to accept multiple registrations of FCP listeners. The fix allows multiple address handlers to be registered for the FCP command and response registers. When a request for these registers is received, all handlers are invoked, and the Firewire response is generated by the core and not by any handler. The cdev API does not change, i.e., userspace is still expected to send a response for FCP requests; this response is silently ignored. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, rebased, whitespace)
* firewire: ohci: 0 may be a valid DMA addressStefan Richter2009-10-311-0/+1
| | | | | | | | | | | | | I was told that there are obscure architectures with non-coherent DMA which may DMA-map to bus address 0. We shall not use 0 as a magic number of uninitialized bus address variables. The packet->payload_length > 0 test cannot be used either (except in at_context_queue_packet) because local requests are not DMA-mapped regardless of payload_length. Hence add a state flag to struct fw_packet. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: core: optimize Topology Map creationStefan Richter2009-10-141-1/+1
| | | | | | | | | | | | The Topology Map of the local node was created in CPU byte order, then a temporary big endian copy was created to compute the CRC, and when a read request to the Topology Map arrived it had to be converted to big endian byte order again. We now generate it in big endian byte order in the first place. This also rids us of 1000 bytes stack usage in tasklet context. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: optimize config ROM creationStefan Richter2009-10-141-14/+0
| | | | | | | | | | | | | | | | | | The config ROM image of the local node was created in CPU byte order, then a temporary big endian copy was created to compute the CRC, and finally the card driver created its own big endian copy. We now generate it in big endian byte order in the first place to avoid one byte order conversion and the temporary on-stack copy of the ROM image (1000 bytes stack usage in process context). Furthermore, two 1000 bytes memset()s are replaced by one 1000 bytes - ROM length sized memset. The trivial fw_memcpy_{from,to}_be32() helpers are now superfluous and removed. The newly added __compute_block_crc() function will be folded into fw_compute_block_crc() in a subsequent change. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: core: header file cleanupStefan Richter2009-09-121-14/+0
| | | | | | | | fw_card_get, fw_card_put, fw_card_release are currently not exported for use outside the firewire-core. Move their definitions/ declarations from the subsystem header file to the core header file. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: core: do not DMA-map stack addressesStefan Richter2009-06-251-0/+1
| | | | | | | | | | | | | | The DMA mapping API cannot map on-stack addresses, as explained in Documentation/DMA-mapping.txt. Convert the two cases of on-stack packet payload buffers in firewire-core (payload of lock requests in the bus manager work and in iso resource management) to slab-allocated memory. There are a number on-stack buffers for quadlet write or quadlet read requests in firewire-core and firewire-sbp2. These are harmless; they are copied to/ from card driver internal DMA buffers since quadlet payloads are inlined with packet headers. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* firewire: net: allow for unordered unit discoveryStefan Richter2009-06-141-4/+0
| | | | | | | | | | | | | | | | | | Decouple the creation and destruction of the net_device from the order of discovery and removal of nodes with RFC 2734 unit directories since there is no reliable order. The net_device is now created when the first RFC 2734 unit on a card is discovered, and destroyed when the last RFC 2734 unit on a card went away. This includes all remote units as well as the local unit, which is therefore tracked as a peer now too. Also, locking around the list of peers is slightly extended to guard against peer removal. As a side effect, fwnet_peer.pdg_lock has become superfluous and is deleted. Peer data (max_rec, speed, node ID, generation) are updated more carefully. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
OpenPOWER on IntegriCloud