summaryrefslogtreecommitdiffstats
path: root/include/linux/brcmphy.h
Commit message (Collapse)AuthorAgeFilesLines
* net: phy: bcm7xxx: remove 28nm wildcard entryFlorian Fainelli2014-08-161-1/+0
| | | | | | | | | | A wildcard entry with the 32-bits OUI 0x600d8400 was added as part of the BCM7xxx internal PHY driver, but that entry might match other PHYs that are not covered by this driver, so let's just remove it. Fixes: b560a58c45c6 ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@greenl8ke.davemloft.net>
* net: phy: add Broadcom BCM7xxx internal PHY driverFlorian Fainelli2014-02-141-0/+9
| | | | | | | | | | | | | | | This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: broadcom: extract register definitionsFlorian Fainelli2014-02-141-0/+51
| | | | | | | | | | The Broadcom BCM54xx register definitions are shared between BCM54xx and BCM7xx internal PHYs for which we are adding support. Extract these register definitions and put them in include/linux/brcmphy.h for use by the BCM7xxx internal PHY driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* broadcom: add include guards to include/linux/brcmphy.hFlorian Fainelli2013-05-151-0/+5
| | | | | | | | include/linux/brcmphy.h is currently not protected against double inclusion, add ifdefs guard to fix that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* broadcom: Add 5241 supportDmitry Baryshkov2010-06-241-0/+1
| | | | | | | This patch adds the 5241 PHY ID to the broadcom module. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* broadcom: move all PHY_ID's to headerDmitry Baryshkov2010-06-241-0/+6
| | | | | | | Move all PHY IDs to brcmphy.h header for completeness and unification of code. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Push phylib definitions to phylibMatt Carlson2010-02-171-0/+11
| | | | | | | | | This patch pushes phylib definitions out to phylib headers. For phy IDs, this removes some code duplication. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3 / broadcom: Optionally disable TXC if no linkMatt Carlson2009-11-021-0/+1
| | | | | | | | | This patch adds code to disable the TXC and RXC reference clocks if link is not available. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3 / broadcom: Add code to disable rxc refclkMatt Carlson2009-11-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The 5785 does not use the RXC reference clock. Turning it off is desirable as it saves power. By default, the 50610 enables the RXC reference clock and the 50610M disables it. Presumably this is one of the reasons why the hardware architect chose one over the other. Adding a "rx reference clock disable" flag is not the ideal way to describe the option, as it would force the MAC using a 50610M to set the flag. Ideally we want the flags to represent opt-in behavior that deviates from hardware defaults. Furthermore, the lack of a "disable" flag implies that the requester wants the rx reference clock enabled, which doesn't necessarily follow. By presenting the option as a passive statement (rx reference clock unused) rather than a command, I hope to convey an opt-in option to disable the rx reference clock that falls back to hardware defaults if not set. A secondary benefit of this is that it keeps the intelligence about phy defaults in the broadcom module where it belongs and allows the broadcom module more latitude should a bug arise. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3 / broadcom: Add PHY_BRCM_CLEAR_RGMII_MODE flagMatt Carlson2009-11-021-0/+1
| | | | | | | | | | | | | | | Broadcom 50610M parts changed the default definitions of the RGMII mode shadow register. The 5785 needs the RGMII mode selection bits [4:3] cleared. The default value of the remaining bits in this register are zero. Rather than unnecessarily burn an extra bit in the dev_flags member in an attempt to enumerate all possible combinations, this patch take a more course grained approach and labels the option as "clear all bits". Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* broadcom: Consolidate dev_flags definitionsMatt Carlson2009-11-021-6/+11
| | | | | | | | | | This patch moves all the dev_flags enumerations outside the broadcom.c file to include/linux/brcmphy.h. The existing flags were not used yet and have been re-enumerated to avoid conflicts. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Add shmem options.Matt Carlson2008-05-291-0/+6
This patch adds some options obtained through shared memory. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud