summaryrefslogtreecommitdiffstats
path: root/include/drm
Commit message (Collapse)AuthorAgeFilesLines
* drm/ttm: device address space != CPU address spaceAlex Deucher2015-03-052-2/+2
| | | | | | | | | | | | | | | | | | | | | We need to store device offsets in 64 bit as the device address space may be larger than the CPU's. Fixes GPU init failures on radeons with 4GB or more of vram on 32 bit kernels. We put vram at the start of the GPU's address space so the gart aperture starts at 4 GB causing all GPU addresses in the gart aperture to get truncated. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89072 [airlied: fix warning on nouveau build] Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: thellstrom@vmware.com Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/mm: Support 4 GiB and larger rangesThierry Reding2015-03-051-26/+26
| | | | | | | | | | | | | | | | | | | | The current implementation is limited by the number of addresses that fit into an unsigned long. This causes problems on 32-bit Tegra where unsigned long is 32-bit but drm_mm is used to manage an IOVA space of 4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1 (or 4 GiB - 4 KiB for page granularity). This commit changes the start and size of the range to be an unsigned 64-bit integer, thus allowing much larger ranges to be supported. [airlied: fix i915 warnings and coloring callback] Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> fixupo
* drm/i915/bdw: PCI IDs ending in 0xb are ULT.Rodrigo Vivi2015-02-231-2/+2
| | | | | | | | | | | | | When reviewing patch that fixes VGA on BDW Halo Jani noticed that we also had other ULT IDs that weren't listed there. So this follow-up patch add these pci-ids as halo and fix comments on i915_pciids.h Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* drm/dp: add drm_dp_link_power_down() helperRob Clark2015-02-011-0/+1
| | | | | | | | We had _power_up(), but drivers also need to be able to power down. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
* drm/bridge: make bridge registration independent of drm flowAjay Kumar2015-01-282-13/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
* drm/bridge: do not pass drm_bridge_funcs to drm_bridge_initAjay Kumar2015-01-281-2/+1
| | | | | | | | | | | | | | | | | Assign the pointer to bridge ops structure(drm_bridge_funcs) in the bridge driver itself, instead of passing it to drm_bridge_init. This will allow bridge driver developer to pack bridge private information inside the bridge object and pass only the drm-relevant information to drm_bridge_init. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
* Merge tag 'topic/atomic-core-2015-01-27' of ↵Dave Airlie2015-01-283-2/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next * tag 'topic/atomic-core-2015-01-27' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Fix potential use of state after free drm/atomic-helper: debug output for modesets drm/atomic-helpers: Saner encoder/crtc callbacks drm/atomic-helpers: Recover full cursor plane behaviour drm/atomic-helper: add connector->dpms() implementation drm/atomic: Add drm_crtc_state->active drm: Add standardized boolean props drm/plane-helper: Fix transitional helper kerneldocs drm/plane-helper: Skip prepare_fb/cleanup_fb when newfb==oldfb Conflicts: include/drm/drm_crtc_helper.h
| * drm/atomic-helpers: Saner encoder/crtc callbacksDaniel Vetter2015-01-271-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For historical reasons going all the way back to how the Xrandr code was implemented the semantics of the callbacks used to enable/disable crtcs and encoders are ... interesting. But with atomic helpers all that complexity has been binned, with only a well-defined on/off action left. Unfortunately the names stuck. Let's fix that by adding enable/disable hooks every, make them the preferred variant for atomic and update documentations. Later on we add debug warnings when drivers have deprecated hooks. But while everything is in-flight with lots of drivers converting to atomic that's a bit too much - better wait for things to settle a bit first. v2: Fix kerneldoc, reported by Wu Fengguang. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * drm/atomic-helpers: Recover full cursor plane behaviourDaniel Vetter2015-01-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Cursor plane updates have historically been fully async and mutliple updates batched together for the next vsync. And userspace relies upon that. Since implementing a full queue of async atomic updates is a bit of work lets just recover the cursor specific behaviour with a hint flag and some hacks to drop the vblank wait. v2: Fix kerneldoc, reported by Wu Fengguang. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * drm/atomic-helper: add connector->dpms() implementationDaniel Vetter2015-01-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This builds on top of the crtc->active infrastructure to implement legacy DPMS. My choice of semantics is somewhat arbitrary, but the entire pipe is enabled as along as one output is still enabled. Of course it also clamps everything that's not ON to OFF. v2: Fix spelling in one comment. v3: Don't do an async commit (Thierry) v4: Dan Carpenter noticed missing error case handling. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * drm/atomic: Add drm_crtc_state->activeDaniel Vetter2015-01-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the infrastructure for DPMS ported to the atomic world. Fundamental changes compare to legacy DPMS are: - No more per-connector dpms state, instead there's just one per each display pipeline. So if you clone either you have to unclone first if you only want to switch off one screen, or you just switch of everything (like all desktops do). This massively reduces complexity for cloning since now there's no more half-enabled cloned configs to consider. - Only on/off, dpms standby/suspend are as dead as real CRTs. Again reduces complexity a lot. Now especially for backwards compat the really important part for dpms support is that dpms on always succeeds (except for hw death and unplugged cables ofc). Which means everything that could fail (like configuration checking, resources assignments and buffer management) must be done irrespective from ->active. ->active is really only a toggle to change the hardware state. More precisely: - Drivers MUST NOT look at ->active in their ->atomic_check callbacks. Changes to ->active MUST always suceed if nothing else changes. - Drivers using the atomic helpers MUST NOT look at ->active anywhere, period. The helpers will take care of calling the respective enable/modeset/disable hooks as necessary. As before the helpers will carefully keep track of the state and not call any hooks unecessarily, so still no double-disables or enables like with crtc helpers. - ->mode_set hooks are only called when the mode or output configuration changes, not for changes in ->active state. - Drivers which reconstruct the state objects in their ->reset hooks or through some other hw state readout infrastructure must ensure that ->active reflects actual hw state. This just implements the core bits and helper logic, a subsequent patch will implement the helper code to implement legacy dpms with this. v2: Rebase on top of the drm ioctl work: - Move crtc checks to the core check function. - Also check for ->active_changed when deciding whether a modeset might happen (for the ALLOW_MODESET mode). - Expose the ->active state with an atomic prop. v3: Review from Rob - Spelling fix in comment. - Extract needs_modeset helper to consolidate the ->mode_changed || ->active_changed checks. v4: Fixup fumble between crtc->state and crtc_state. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * drm: Add standardized boolean propsDaniel Vetter2015-01-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not a new type exposed to userspace, just a standard way to create them since between range, bitmask and enum there's 3 different ways to pull out a boolean prop. Also add the kerneldoc for the recently added new prop types, which Rob forgot all about. v2: Fixup kerneldoc, spotted by Rob. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
* | Merge tag 'drm/tegra/for-3.20-rc1' of ↵Dave Airlie2015-01-283-1/+47
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v3.20-rc1 The biggest part of these changes is the conversion to atomic mode- setting. A lot of cleanup and demidlayering was required before the conversion, with the result being a whole lot of changes. Besides the atomic mode-setting support, the host1x bus now has the proper infrastructure to support suspend/resume for child devices. Finally, a couple of smaller cleanup patches round things off. * tag 'drm/tegra/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (54 commits) drm/tegra: Use correct relocation target offsets drm/tegra: Add minimal power management drm/tegra: dc: Unify enabling the display controller drm/tegra: Track tiling and format in plane state drm/tegra: Track active planes in CRTC state drm/tegra: Remove unused ->mode_fixup() callbacks drm/tegra: Atomic conversion, phase 3, step 3 drm/tegra: Atomic conversion, phase 3, step 2 drm/tegra: dc: Use atomic clock state in modeset drm/tegra: sor: Implement ->atomic_check() drm/tegra: hdmi: Implement ->atomic_check() drm/tegra: dsi: Implement ->atomic_check() drm/tegra: rgb: Implement ->atomic_check() drm/tegra: dc: Store clock setup in atomic state drm/tegra: Atomic conversion, phase 3, step 1 drm/tegra: Atomic conversion, phase 2 drm/tegra: Atomic conversion, phase 1 drm/tegra: dc: Do not needlessly deassert reset drm/tegra: Output cleanup functions cannot fail drm/tegra: Remove remnants of the output midlayer ...
| * | drm/atomic: Add ->atomic_check() to encoder helpersThierry Reding2015-01-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This callback can be used instead of the legacy ->mode_fixup() and is passed the CRTC and connector states. It can thus use these states to validate the modeset and cache values in the state to be used during the actual modeset. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | drm/plane: Add optional ->atomic_disable() callbackThierry Reding2015-01-272-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to prevent drivers from having to perform the same checks over and over again, add an optional ->atomic_disable callback which the core calls under the right circumstances. v2: pass old state and detect edges to avoid calling ->atomic_disable on already disabled planes, remove redundant comment (Daniel Vetter) v3: rename helper to drm_atomic_plane_disabling() to clarify that it is checking for transitions, move helper to drm_atomic_helper.h, clarify check for !old_state and its relation to transitional helpers Here's an extract from some discussion rationalizing the behaviour (for a full version, see the reference below): > > Hm, thinking about this some more this will result in a slight difference > > in behaviour, at least when drivers just use the helper ->reset functions > > but don't disable everything: > > - With transitional helpers we assume we know nothing and call > > ->atomic_disable. > > - With atomic old_state->crtc == NULL in the same situation right after > > boot-up, but we asssume the plane is really off and _dont_ call > > ->atomic_disable. > > > > Should we instead check for (old_state && old_state->crtc) and state that > > drivers need to make sure they don't have stuff hanging around? > > I don't think we can check for old_state because otherwise this will > always return false, whereas we really want it to force-disable planes > that could be on (lacking any more accurate information). For > transitional helpers anyway. > > For the atomic helpers, old_state will never be NULL, but I'd assume > that the driver would reconstruct the current state in ->reset(). By the way, the reason for why old_state can be NULL with transitional helpers is the ordering of the steps in the atomic transition. Currently the Tegra patches do this (based on your blog post and the Exynos proto- type): 1) atomic conversion, phase 1: - implement ->atomic_{check,update,disable}() - use drm_plane_helper_{update,disable}() 2) atomic conversion, phase 2: - call drm_mode_config_reset() from ->load() - implement ->reset() That's only a partial list of what's done in these steps, but that's the only relevant pieces for why old_state is NULL. What happens is that without ->reset() implemented there won't be any initial state, hence plane->state (the old_state here) will be NULL the first time atomic state is applied. We could of course reorder the sequence such that drivers are required to hook up ->reset() before they can (or at the same as they) hook up the transitional helpers. We could add an appropriate WARN_ON to this helper to make that more obvious. However, that will not solve the problem because it only gets rid of the special case. We still don't know whether old_state->crtc == NULL is the current state or just the initial default. So no matter which way we do this, I don't see a way to get away without requiring specific semantics from drivers. They would be that: - drivers recreate the correct state in ->reset() so that old_state->crtc != NULL if the plane is really enabled or - drivers have to ensure that the real state in fact mirrors the initial default as encoded in the state (plane disabled) References: http://lists.freedesktop.org/archives/dri-devel/2015-January/075578.html Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | drm/plane: Make ->atomic_update() mandatoryThierry Reding2015-01-271-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | There is no use-case where it would be useful for drivers not to implement this function and the transitional plane helpers already require drivers to provide an implementation. v2: add new requirement to kerneldoc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | drm: Add rotation value to plane stateMatt Roper2015-01-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | The rotation property is shared by multiple drivers, so it makes sense to store the rotation value (for atomic-converted drivers) in the common plane state so that core code can eventually access it as well. Cc: dri-devel@lists.freedesktop.org Suggested-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | Merge tag 'drm-intel-next-2015-01-17' of ↵Dave Airlie2015-01-272-37/+38
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next - refactor i915/snd-hda interaction to use the component framework (Imre) - psr cleanups and small fixes (Rodrigo) - a few perf w/a from Ken Graunke - switch to atomic plane helpers (Matt Roper) - wc mmap support (Chris Wilson & Akash Goel) - smaller things all over * tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits) drm/i915: Update DRIVER_DATE to 20150117 i915: reuse %ph to dump small buffers drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview. drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell. drm/i915: PSR link standby at debugfs drm/i915: group link_standby setup and let this info visible everywhere. drm/i915: Add missing vbt check. drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit. drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell. drm/i915: VLV/CHV PSR needs to exit PSR on every flush. drm/i915: Fix kerneldoc for i915 atomic plane code drm/i915: Don't pretend SDVO hotplug works on 915 drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup() drm/i915: Make hpd arrays big enough to avoid out of bounds access Revert "drm/i915/chv: Use timeout mode for RC6 on chv" drm/i915: Improve HiZ throughput on Cherryview. drm/i915: Reset CSB read pointer in ring init drm/i915: Drop unused position fields (v2) drm/i915: Move to atomic plane helpers (v9) ...
| * \ Merge tag 'topic/i915-hda-componentized-2015-01-12' into drm-intel-next-queuedDaniel Vetter2015-01-1210-46/+175
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/gpu/drm/i915/intel_runtime_pm.c Separate branch so that Takashi can also pull just this refactoring into sound-next. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| | * | drm/i915: remove unused power_well/get_cdclk_freq apiImre Deak2015-01-121-37/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After switching to using the component interface this API isn't needed any more. v2-3: unchanged v4: - move the removal of i915_powerwell.h to this patch (Takashi) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| | * | drm/i915: add component supportImre Deak2015-01-121-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register a component to be used to interface with the snd_hda_intel driver. This is meant to replace the same interface that is currently based on module symbol lookup. v2: - change roles between the hda and i915 components (Daniel) - add the implementation to a new file (Jani) - use better namespacing (Jani) v3: - move the implementation to intel_audio.c (Daniel) - rename display_component to audio_component (Daniel) - add kerneldoc (Daniel) v4: - run forgotten git rm i915_component.c (Jani) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | Merge tag 'topic/core-stuff-2015-01-23' of ↵Dave Airlie2015-01-272-1/+2
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next Just flushing out my drm-misc branch, nothing major. Well too old patches I've dug out from years since a patch from Rob look eerily familiar ;-) * tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel: drm/probe-helper: clamp unknown connector status in the poll work drm/probe-helper: don't lose hotplug event next: drm/atomic: Use copy_from_user to copy 64 bit data from user space drm: Make drm_read() more robust against multithreaded races drm/fb-helper: Propagate errors from initial config failure drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"
| * | | drm/probe-helper: don't lose hotplug eventDaniel Vetter2015-01-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a race window (small for hpd, 10s large for polled outputs) where userspace could sneak in with an unrelated connnector probe ioctl call and eat the hotplug event (since neither the hpd nor the poll code see a state change). To avoid this, check whether the connector state changes in all other ->detect calls (in the current helper code that's only probe_single) and if that's the case, fire off a hotplug event. Note that we can't directly call the hotplug event handler, since that expects that no locks are held (due to reentrancy with the fb code to update the kms console). Also, this requires that drivers using the probe_single helper function set up the poll work. All current drivers do that already, and with the reworked hpd handling there'll be no downside to unconditionally setting up the poll work any more. v2: Review from Rob Clark - Don't bail out of the output poll work immediately if it's disabled to make sure we deliver the delayed hoptplug events. Instead just jump to the tail. - Don't scheduel the work when it's not set up. Would be a driver bug since using probe helpers for anything dynamic without them initialized makes them all noops. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | drm/fb-helper: Propagate errors from initial config failureThierry Reding2015-01-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make drm_fb_helper_initial_config() return an int rather than a bool so that the error can be properly propagated. While at it, update drivers to propagate errors further rather than just ignore them. v2: - cirrus: No cleanup is required, the top-level cirrus_driver_load() will do it as part of cirrus_driver_unload() in its cleanup path. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> [danvet: Squash in simplification patch from kbuild.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm: add bus_formats and num_bus_formats fields to drm_display_infoBoris Brezillon2015-01-211-0/+8
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add bus_formats and num_bus_formats fields and drm_display_info_set_bus_formats helper function to specify the bus formats supported by a given display. This information can be used by display controller drivers to configure the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw RGB or LVDS busses). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Thierry Reding <treding@nvidia.com>
* | | Merge tag 'imx-drm-next-2015-01-09' of ↵Dave Airlie2015-01-212-0/+63
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.pengutronix.de/git/pza/linux into drm-next imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup - Implement mode_fixup for a DI vertical timing limitation - Use generic DRM OF helpers in DRM core - Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip driver - Add DC use counter to fix multi-display support - Simplify handling of DI clock flags - A few small fixes and cleanup * tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits) imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set() gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg imx-drm: encoder prepare/mode_set must use adjusted mode imx-drm: ipuv3-crtc: Implement mode_fixup drm_modes: add drm_display_mode_to_videomode gpu: ipu-di: remove some non-functional code gpu: ipu-di: Add ipu_di_adjust_videomode() drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver drm: bridge/dw_hdmi: request interrupt only after initializing the mutes drm: bridge/dw_hdmi: add rockchip rk3288 support dt-bindings: Add documentation for rockchip dw hdmi drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done drm: bridge/dw_hdmi: add mode_valid support drm: bridge/dw_hdmi: add support for multi-byte register width access dt-bindings: add document for dw_hdmi drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi drm: imx: imx-hdmi: split phy configuration to platform driver drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode ...
| * | | drm_modes: add drm_display_mode_to_videomodeSteve Longerbeam2015-01-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add conversion from drm_display_mode to videomode. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
| * | | drm: bridge/dw_hdmi: add rockchip rk3288 supportAndy Yan2015-01-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rockchip RK3288 hdmi is compatible with dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
| * | | drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmiAndy Yan2015-01-071-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
* | | | Merge tag 'drm-intel-next-2014-12-19' of ↵Dave Airlie2015-01-102-0/+5
|\ \ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next - plane handling refactoring from Matt Roper and Gustavo Padovan in prep for atomic updates - fixes and more patches for the seqno to request transformation from John - docbook for fbc from Rodrigo - prep work for dual-link dsi from Gaurav Signh - crc fixes from Ville - special ggtt views infrastructure from Tvrtko Ursulin - shadow patch copying for the cmd parser from Brad Volkin - execlist and full ppgtt by default on gen8, for testing for now * tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (131 commits) drm/i915: Update DRIVER_DATE to 20141219 drm/i915: Hold runtime PM during plane commit drm/i915: Organize bind_vma funcs drm/i915: Organize INSTDONE report for future. drm/i915: Organize PDP regs report for future. drm/i915: Organize PPGTT init drm/i915: Organize Fence registers for future enablement. drm/i915: tame the chattermouth (v2) drm/i915: Warn about missing context state workarounds only once drm/i915: Use true PPGTT in Gen8+ when execlists are enabled drm/i915: Skip gunit save/restore for cherryview drm/i915/chv: Use timeout mode for RC6 on chv drm/i915: Add GPGPU_THREADS_DISPATCHED to the register whitelist drm/i915: Tidy up execbuffer command parsing code drm/i915: Mark shadow batch buffers as purgeable drm/i915: Use batch length instead of object size in command parser drm/i915: Use batch pools with the command parser drm/i915: Implement a framework for batch buffer pools drm/i915: fix use after free during eDP encoder destroying drm/i915/skl: Skylake also supports DP MST ...
| * | | drm: add helper to get crtc timings (v5)Gustavo Padovan2014-12-052-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to get hdisplay and vdisplay in a few places so create a helper to make our job easier. Note that drm_crtc_check_viewport() and intel_modeset_pipe_config() were previously making adjustments for doublescan modes and vscan > 1 modes, which was incorrect. Using our new helper fixes this mistake. v2 (by Matt): Use new stereo doubling function (suggested by Ville) v3 (by Matt): - Add missing kerneldoc (Daniel) - Use drm_mode_copy() (Jani) v4 (by Matt): - Drop stereo doubling function again; add 'stereo only' flag to drm_mode_set_crtcinfo() instead (Ville) v5 (by Matt): - Note behavioral change in drm_crtc_check_viewport() and intel_modeset_pipe_config(). (Ander) - Describe new adjustment flags in drm_mode_set_crtcinfo()'s kerneldoc. (Ander) Cc: dri-devel@lists.freedesktop.org Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | Merge tag 'topic/atomic-core-2015-01-05' of ↵Dave Airlie2015-01-094-6/+85
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next Next batch of atomic work. Most important is the propertification from Rob and the nth iteration of the actual atomic ioctl originally from Ville. Big differences compared to earlier revisions: - Core properties are now fully handled by the core, drivers can only handle driver-specific properties. - Atomic props&ioctl are opt-in per file_priv, userspace needs to explicitly ask for it (like universal plane support). - For now all hidden behind the atomic module option until this has settled a bit. - Atomic modesets are currently not possible since the exact abi for how to handle the mode property is still under discussion. Besides this some cleanup patches from me and the addition of per-object state to global state backpointers to simplify drivers. * tag 'topic/atomic-core-2015-01-05' of git://anongit.freedesktop.org/drm-intel: drm: Ensure universal_planes is set for atomic drm/atomic: Hide drm.ko internal interfaces drm: Atomic modeset ioctl drm/atomic: atomic connector properties drm/atomic: atomic plane properties drm: small property creation cleanup drm/atomic: atomic_check functions drm: add atomic properties drm: refactor getproperties/getconnector drm: tweak getconnector locking drm: add atomic_get_property drm: add atomic_set_property wrappers drm: get rid of direct property value access drm: store property instead of id in obj attachment drm: allow property validation for refcnted props drm/atomic: Introduce state->obj backpointers drm/atomic-helper: Again check modeset *before* plane states drm/atomic-helper: Export both plane and modeset check helpers
| * | | | drm/atomic: Hide drm.ko internal interfacesDaniel Vetter2015-01-051-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is just a bit fallout from patch polishing and moving the get_prop logic fully into the core: - Drop EXPORT_SYMBOL and make the helpers static. - Drop kerneldoc since not used by drivers. - Move the cross-file function declarations only used by drm.ko internally to an internal header. v2: keep the gist of the comments, requested by Rob. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * | | | drm: Atomic modeset ioctlRob Clark2015-01-051-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The atomic modeset ioctl can be used to push any number of new values for object properties. The driver can then check the full device configuration as single unit, and try to apply the changes atomically. The ioctl simply takes a list of object IDs and property IDs and their values. Originally based on a patch from Ville Syrjälä, although it has mutated (mutilated?) enough since then that you probably shouldn't blame it on him ;-) The atomic support is hidden behind the DRM_CLIENT_CAP_ATOMIC cap (to protect legacy userspace) and drm.atomic module param (for now). v2: Check for file_priv->atomic to make sure we only allow userspace in-the-know to use atomic. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | | drm/atomic: atomic plane propertiesRob Clark2015-01-051-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expose the core plane state as properties, so they can be updated via atomic ioctl. v2: atomic property flag Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | | drm: add atomic propertiesRob Clark2015-01-053-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once a driver is using atomic helpers for modeset, the next step is to switch over to atomic properties. To do this, make sure that any modeset objects have their ->atomic_{get,set}_property() vfuncs suitably populated if they have custom properties (you did already remember to plug in atomic-helper func for the legacy ->set_property() vfuncs, right?), and then set DRIVER_ATOMIC bit in driver_features flag. A new cap is introduced, DRM_CLIENT_CAP_ATOMIC, for the purposes of shielding legacy userspace from atomic properties. Mostly for the benefit of legacy DDX drivers that do silly things like getting/setting each property at startup (since some of the new atomic properties will be able to trigger modeset). Signed-off-by: Rob Clark <robdclark@gmail.com> [danvet: Squash in fixup patch to check for DRM_MODE_PROP_ATOMIC instaed of the CAP define when filtering properties. Reported by Tvrtko Uruslin, acked by Rob.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | | drm: add atomic_get_propertyRob Clark2014-12-182-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we won't be using the obj->properties->values[] array to shadow property values for atomic drivers, we are going to need a vfunc for getting prop values. Add that along w/ mandatory wrapper fxns. v2: more comments and copypasta comment typo fix Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | | drm: add atomic_set_property wrappersRob Clark2014-12-182-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we add properties for all the standard plane/crtc/connector attributes (in preperation for the atomic ioctl), we are going to want to handle core state in core (rather than per driver). Intercepting the core properties will be easier if the atomic_set_property vfuncs are not called directly, but instead have a mandatory wrapper function (which will later serve as the point to intercept core properties). v2: more verbose comments and copypasta comment fix Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | | drm: get rid of direct property value accessRob Clark2014-12-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For atomic drivers, we won't use the values array but instead shunt things off to obj->atomic_get_property(). So to simplify things make all read/write of properties values go through the accessors. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | | drm: store property instead of id in obj attachmentRob Clark2014-12-171-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep property pointer, instead of id, in per mode-object attachments. This will simplify things in later patches. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | | drm/atomic: Introduce state->obj backpointersDaniel Vetter2014-12-172-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Useful since this way we can pass around just the state objects and will get ther real object, too. Specifically this allows us to again simplify the parameters for set_crtc_for_plane. v2: msm already has it's own specific plane_reset hook, don't forget that one! v3: Fixup kerneldoc, reported by 0-day builder. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> (v2) Tested-by: Rob Clark <robdclark@gmail.com> (v2) Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * | | | drm/atomic-helper: Export both plane and modeset check helpersDaniel Vetter2014-12-172-0/+12
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default call sequence for these two parts won't fit for all drivers. So export the two pieces and explain with a bit of kerneldoc when each should be called. v2: Squash in fixup from Rob to actually add the newly exported functions to headers Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
* | | | Merge tag 'topic/core-stuff-2014-12-19' of ↵Dave Airlie2015-01-094-11/+33
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next Misc drm patches with mostly polish patches from Thierry, with a bit of generic mode validation from Ville and a few other oddball things. * tag 'topic/core-stuff-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (25 commits) drm: Include drm_crtc_helper.h in DocBook drm: Make drm_crtc_helper.h standalone includible drm: Move IRQ related fields to proper section drm: Remove stale comment drm: Do basic sanity checks for user modes drm: Perform basic sanity checks on probed modes drm: Reorganize probed mode validation drm/doc: Remove duplicate "by" drm/info: Remove unused code drm/cache: Use wbinvd helpers drm/plane-helper: Test for plane disable earlier drm/doc: Document drm_add_modes_noedid() usage drm: bit of spell-check / editorializing. drm: Prefer sizeof(type) over sizeof type drm: Remove useless else block drm: Remove unneeded braces for single statement blocks drm: Do not assign in if condition drm: Prefer kmalloc_array() over kmalloc() with multiply drm: Prefer kcalloc() over kzalloc() with multiply drm: Miscellaneous checkpatch whitespace cleanups ...
| * | | drm: Include drm_crtc_helper.h in DocBookThierry Reding2014-12-171-5/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is already a section that describes the helpers implemented by this module. Add the kerneldoc-generated structure descriptions to this section. While at it, add missing kerneldoc for the structures to avoid warnings when generating the documentation. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | drm: Make drm_crtc_helper.h standalone includibleThierry Reding2014-12-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The file refers to a bunch of structure declared in drm_crtc.h, so include it to make sure the drm_crtc_helper.h header can be included standalone. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | drm: Move IRQ related fields to proper sectionThierry Reding2014-12-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The .irq and .irq_enabled fields are part of the VBLANK interrupt handling infrastructure, so move them to the appropriate section within the structure. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | drm: Remove stale commentThierry Reding2014-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The struct drm_connector_funcs kerneldoc refers to a part of struct drm_crtc_funcs that no longer exists. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | drm: Perform basic sanity checks on probed modesVille Syrjälä2014-12-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure the timings of probed modes at least pass some very basic sanity checks. The checks include: - clock,hdisplay,vdisplay are non zero - sync pulse fits within the blanking period - htotal,vtotal are big enough I have not checked all the drivers to see if the modes the generate might violate these constraints. I'm hoping not, because that would mean either abandoning the idea of doing this from the core code, or fixing the drivers. I'm not entirely sure about limiting the sync pulse to the blanking period. Intel hardware doesn't support such things, but some other hardware might. However at least HDMI doesn't allow having sync pulse edges within the active period, so I'm thinking the check is probably OK to have in the common code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | drm: Reorganize probed mode validationVille Syrjälä2014-12-171-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make drm_mode_validate_size() and drm_mode_validate_flag() deal with a single mode instead of having each iterate through the mode list. The hope is that in the future we might be able to share various mode validation functions between modeset and get_modes. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2"Dave Airlie2014-12-241-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 355a70183848f21198e9f6296bd646df3478a26d. This had some bad side effects under normal operation, and should have been dropped earlier. Signed-off-by: Dave Airlie <airlied@redhat.com>
OpenPOWER on IntegriCloud