summaryrefslogtreecommitdiffstats
path: root/include/asm-arm
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] 3760/1: This patch adds timeouts while working with SSP registers. ā†µPaul Sokolovsky2006-08-272-4/+4
| | | | | | | | | | | | | | | Such timeouts were en Patch from Paul Sokolovsky This patch adds timeouts while working with SSP registers. Such timeouts were envisioned by docstrings in ssp.c, but were not implemented. There were actual lockups while accessing touchscreen for iPaqs h1910, h4000 due to lack of the timeouts. This is updated version of previously submitted patch: 3738/1. Signed-off-by: Paul Sokolovsky <pmiscml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3756/1: Assign value for HWCAP_IWMMXTPaul Gortmaker2006-08-181-0/+1
| | | | | | | | | | | | Patch from Paul Gortmaker Some folks here at Wind River asked me if I'd push this out so that the value was generally agreed upon in advance by all folks interested in working with iWMMXt. Seems simple enough... Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3753/1: S3C24XX: DMA fixesBen Dooks2006-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | Patch from Ben Dooks A number of small issues with the S3C24XX DMA have cropped up, which this patch fixes. These are: - check wether we can load another buff in start - update state handling in s3c2410_dma_lastxfer - only reload in irq if channel is not idle - more informative timeout errors (add source) - do not call request_irq() with irqs locked - added waitforstop function The patch also adds a S3C2410_DMAOP_STARTED for the occasions when the driver wants to ensure that the DMA system load state is resynced after loading. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3743/1: ARM: OMAP: Fix compile for OMAPTony Lindgren2006-08-021-2/+0
| | | | | | | | | | | | Patch from Tony Lindgren "clocks" is only needed only for CONFIG_OMAP_RESET_CLOCKS, which turns of all unused clocks in with late_initcall. This is to kill clocks that may have been left on by the bootloader. Having static and non-static declaration of clocks makes omap_h2_1610_defconfig build fail. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-07-291-4/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3734/1: Fix the unused variable warning in __iounmap() [ARM] 3737/1: Export ARM copy/clear_user_page symbols [ARM] 3736/1: xscale: don't mis-report 80219 as an iop32x [ARM] 3733/2: S3C24XX: Remove old IDE registers in Anubis [ARM] 3732/1: S3C24XX: tidy syntax in osiris and anubis machines [ARM] Fix SMP booting [ARM] 3731/1: Allow IRQ definitions of IQ80331 and IQ80332 to co-exist [ARM] 3730/1: ep93xx: enable usb ohci driver in the defconfig [ARM] Fix cats build
| * [ARM] 3731/1: Allow IRQ definitions of IQ80331 and IQ80332 to co-existMartin Michlmayr2006-07-241-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Martin Michlmayr ARCH_IQ80331 and MACH_IQ80332 can be enabled at the same time but a header file makes certain IRQ definitions conditional, leading to the following compilation error when both platforms are enabled: arch/arm/mach-iop3xx/iq80332-pci.c: In function 'iq80332_map_irq': arch/arm/mach-iop3xx/iq80332-pci.c:54: error: 'IRQ_IQ80332_INTA' undeclared (first use in this function) arch/arm/mach-iop3xx/iq80332-pci.c:54: error: (Each undeclared identifier is reported only once arch/arm/mach-iop3xx/iq80332-pci.c:54: error: for each function it appears in.) arch/arm/mach-iop3xx/iq80332-pci.c:54: error: 'IRQ_IQ80332_INTB' undeclared (first use in this function) arch/arm/mach-iop3xx/iq80332-pci.c:54: error: 'IRQ_IQ80332_INTC' undeclared (first use in this function) arch/arm/mach-iop3xx/iq80332-pci.c:54: error: 'IRQ_IQ80332_INTD' undeclared (first use in this function) Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] remove set_wmb - arch removalSteven Rostedt2006-07-141-1/+0
|/ | | | | | | | | | | | | | | | set_wmb should not be used in the kernel because it just confuses the code more and has no benefit. Since it is not currently used in the kernel this patch removes it so that new code does not include it. All archs define set_wmb(var, value) to do { var = value; wmb(); } while(0) except ia64 and sparc which use a mb() instead. But this is still moot since it is not used anyway. Hasn't been tested on any archs but x86 and x86_64 (and only compiled tested) Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] Allow Versatile to be built for AB and PBRussell King2006-07-111-0/+2
| | | | | | | | | | | | | | | If a configuration was chosen to support both the Versatile AB and PB boards, the result would write to registers not available on the PB version of the board. Resolve this by using machine_is_xxx(). Also, for the CLCD, despite how the code looks, both the AB and PB access the same location to control the clock rate - it's just called something different between the two board versions. Invent our own name for this location and use it unconditionally. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3711/1: AT91 timer updateAndrew Victor2006-07-051-8/+0
| | | | | | | | | | | | | Patch from Andrew Victor The AIC interrupt controller is the same on the Atmel AT91RM9200, AT91SAM9261 and AT91SAM9260 processors. This patch removes any RM9200-specific naming from the IRQ driver, and moves the AT91RM9200's default IRQ priority table into at91rm9200.c. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge git://git.infradead.org/hdrinstall-2.6Linus Torvalds2006-07-041-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/hdrinstall-2.6: Remove export of include/linux/isdn/tpam.h Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export Restrict headers exported to userspace for SPARC and SPARC64 Add empty Kbuild files for 'make headers_install' in remaining arches. Add Kbuild file for Alpha 'make headers_install' Add Kbuild file for SPARC 'make headers_install' Add Kbuild file for IA64 'make headers_install' Add Kbuild file for S390 'make headers_install' Add Kbuild file for i386 'make headers_install' Add Kbuild file for x86_64 'make headers_install' Add Kbuild file for PowerPC 'make headers_install' Add generic Kbuild files for 'make headers_install' Basic implementation of 'make headers_check' Basic implementation of 'make headers_install'
| * Add empty Kbuild files for 'make headers_install' in remaining arches.David Woodhouse2006-06-181-0/+1
| | | | | | | | | | | | | | | | These include nothing more than the basic set of files listed in asm-generic/Kbuild.asm. Any extra arch-specific files will need to be added. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner2006-07-023-8/+2
| | | | | | | | | | | | | | | | | | | | The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] genirq: ARM dyntick cleanupThomas Gleixner2006-07-022-0/+12
| | | | | | | | | | | | | | | | | | | | Linus: "The hacks in kernel/irq/handle.c are really horrid. REALLY horrid." They are indeed. Move the dyntick quirks to ARM where they belong. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-07-024-118/+54
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling [ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling [ARM] 3697/1: ARM: Convert shark to generic irq handling [ARM] 3696/1: ARM: Convert clps711x to generic irq handling [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling [ARM] 3693/1: ARM: Convert omap1 to generic irq handling [ARM] 3691/1: ARM: Convert imx to generic irq handling [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling [ARM] 3687/1: ARM: Convert integrator to generic irq handling [ARM] 3685/1: ARM: Convert pxa to generic irq handling [ARM] 3684/1: ARM: Convert l7200 to generic irq handling [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling [ARM] 3680/1: ARM: Convert footbridge to generic irq handling [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes ... Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless code).
| * | [ARM] 3692/1: ARM: coswitch irq handling to the generic implementationThomas Gleixner2006-07-014-118/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Switch the ARM irq core handling to the generic implementation. The ARM specific header files now contain mostly migration stubs and helper macros. Note that each machine type must be converted after this step seperately. This was seperated out from the patch for easier review. The main changes for the machine type code is the conversion of the type handlers to a 'type flow' and 'chip' model. This affects only the multiplex interrupt handlers. A conversion macro needs to be added to those implementations, which defines the data structure which is registered by the set_irq_chained_handler() macro. Some minor fixups of include files and the conversion of data structure access is necessary all over the place. The mostly macro based conversion was provided to allow an easy migration of the existing implementations. The code compiles on all defconfigs available in arch/arm/configs except those which were broken also before applying the conversion patches. The code has been boot and runtime tested on most ARM platforms. The results of an extensive testing and bugfixing series can be found at: http://www.linutronix.de/index.php?page=testing Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-07-0217-54/+398
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
| * | [ARM] 3705/1: add supersection support to ioremap()Lennert Buytenhek2006-07-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek Analogous to the previous patch that allows ioremap() to use section mappings, this patch allows ioremap() to use supersection mappings. Original patch by Deepak Saxena. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructureLennert Buytenhek2006-07-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek This patch makes the iWMMXt context switch hook use the generic thread notifier infrastructure that was recently merged in commit d6551e884cf66de072b81f8b6d23259462c40baf. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Add section support to ioremapRussell King2006-06-293-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow section mappings to be setup using ioremap() and torn down with iounmap(). This requires additional support in the MM context switch to ensure that mappings are properly synchronised when mapped in. Based an original implementation by Deepak Saxena, reworked and ARMv6 support added by rmk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Set bit 4 on section mappings correctly depending on CPURussell King2006-06-292-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3666/1: TRIZEPS4 [1/5] coreJürgen Schindele2006-06-292-0/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Jürgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jürgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | Merge omap treeRussell King2006-06-299-52/+269
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-upstream: (26 commits) ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ARM: OMAP: Add OMAP_TAG_CAMERA_SENSOR ARM: OMAP: Add initial 24xx suspend support ARM: OMAP: Update cpufreq support for 24xx ARM: OMAP: Add GPMC support for OMAP2 ARM: OMAP: Fix DMA channel irq handling for omap24xx ARM: OMAP: OMAP2 DMA burst support ARM: OMAP: Fix 32 kHz timer and modify GP timer to use GPT1 ARM: OMAP: Port dmtimers to OMAP2 and implement PWM support ARM: OMAP: Correct two bugs in arch/arm/mach-omap2/clock.c ARM: OMAP: Register the 24xx McSPI device ARM: OMAP: Add bitbank SPI driver for Innovator 1510 touchscreen ARM: OMAP: Aic23 alsa platform driver code for board-innovator ARM: OMAP: Fix GPIO IRQ mask handling ARM: OMAP: DMA transfer parameter configuration fix ...
| | * | ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoringTony Lindgren2006-06-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Multiplexing for 24xx GPMC wait pin monitoring Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Update dmtimersTimo Teras2006-06-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Initialize timer outside of spinlock to reduce the time the spinlock is held - Do clk_get to the source clocks during initialization to avoid sleeping later - New function to set counter register Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Mux updates for external DMA and GPIOTony Lindgren2006-06-261-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Mux updates for external DMA and GPIO. GPIO updates by Igor Stoppa. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Add OMAP_TAG_CAMERA_SENSORSamuel Ortiz2006-06-261-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add platform config data for camera sensors. Since it includes pointers, it should not be passed from the bootloader. Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Add initial 24xx suspend supportTony Lindgren2006-06-262-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for omap24xx power domains and allows suspend to work. Please note that for some reason core power domain still does not seem to idle. Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Add GPMC support for OMAP2Juha Yrjola2006-06-261-0/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement basic support for General-Purpose Memory Controller as found on OMAP2420. Dynamic CS address space allocation still needs to be done. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Fix DMA channel irq handling for omap24xxTony Lindgren2006-06-261-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - DMA CSR register is cleared by reading on omap1, but on omap2 it is cleard by writing to it. - DMA TOUT interrupt does not exist on omap24xx, rename it - Add SECURE and MISALIGNED errors by default for omap24xx - Add defines for external DMA request lines Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: OMAP2 DMA burst supportKyungmin Park2006-06-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP2 DMA burst setting support Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Port dmtimers to OMAP2 and implement PWM supportTimo Teras2006-06-262-46/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port dmtimer framework to OMAP2. Modify the dmtimers API to support setting of PWM configuration and prescaler. Convert 32 kHz timer and GP timer to use the dmtimer framework. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Add core fsample supportBrian Swetland2006-06-262-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds core support for the TI F-Sample Board (OMAP 850). Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | | Remove obsolete #include <linux/config.h>Jƶrn Engel2006-06-301-1/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jƶrn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | | | typo fixes: specfic -> specificAdrian Bunk2006-06-301-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | | | typo fixes: occuring -> occurringAdrian Bunk2006-06-301-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | | | typo fixes: disadvantadge -> disadvantageAdrian Bunk2006-06-301-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | | | [AF_UNIX]: Datagram getpeersecCatherine Zhang2006-06-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements an API whereby an application can determine the label of its peer's Unix datagram sockets via the auxiliary data mechanism of recvmsg. Patch purpose: This patch enables a security-aware application to retrieve the security context of the peer of a Unix datagram socket. The application can then use this security context to determine the security context for processing on behalf of the peer who sent the packet. Patch design and implementation: The design and implementation is very similar to the UDP case for INET sockets. Basically we build upon the existing Unix domain socket API for retrieving user credentials. Linux offers the API for obtaining user credentials via ancillary messages (i.e., out of band/control messages that are bundled together with a normal message). To retrieve the security context, the application first indicates to the kernel such desire by setting the SO_PASSSEC option via getsockopt. Then the application retrieves the security context using the auxiliary data mechanism. An example server application for Unix datagram socket should look like this: toggle = 1; toggle_len = sizeof(toggle); setsockopt(sockfd, SOL_SOCKET, SO_PASSSEC, &toggle, &toggle_len); recvmsg(sockfd, &msg_hdr, 0); if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) { cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr); if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) && cmsg_hdr->cmsg_level == SOL_SOCKET && cmsg_hdr->cmsg_type == SCM_SECURITY) { memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext)); } } sock_setsockopt is enhanced with a new socket option SOCK_PASSSEC to allow a server socket to receive security context of the peer. Testing: We have tested the patch by setting up Unix datagram client and server applications. We verified that the server can retrieve the security context using the auxiliary data mechanism of recvmsg. Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com> Acked-by: Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2006-06-291-1/+1
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] i386: export memory more than 4G through /proc/iomem [PATCH] 64bit Resource: finally enable 64bit resource sizes [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed [PATCH] 64bit resource: change pnp core to use resource_size_t [PATCH] 64bit resource: change pci core and arch code to use resource_size_t [PATCH] 64bit resource: change resource core to use resource_size_t [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource [PATCH] 64bit resource: fix up printks for resources in misc drivers [PATCH] 64bit resource: fix up printks for resources in arch and core code [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers [PATCH] 64bit resource: fix up printks for resources in video drivers [PATCH] 64bit resource: fix up printks for resources in ide drivers [PATCH] 64bit resource: fix up printks for resources in mtd drivers [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers [PATCH] 64bit resource: fix up printks for resources in networks drivers [PATCH] 64bit resource: fix up printks for resources in sound drivers [PATCH] 64bit resource: C99 changes for struct resource declarations Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that was changed by the 64-bit resources had been deleted in the meantime ;)
| * | | [PATCH] 64bit resource: change pci core and arch code to use resource_size_tGreg Kroah-Hartman2006-06-271-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | Merge branch 'nommu' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-06-2813-78/+378
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'nommu' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] nommu: backtrace code must not reference a discarded section [ARM] nommu: Initial uCLinux support for MMU-based CPUs [ARM] nommu: prevent Xscale-based machines being selected [ARM] nommu: export flush_dcache_page() [ARM] nommu: remove fault-armv, mmap and mm-armv files from nommu build [ARM] Remove TABLE_SIZE, and several unused function prototypes [ARM] nommu: Provide a simple flush_dcache_page implementation [ARM] nommu: add arch/arm/Kconfig-nommu to Kconfig files [ARM] nommu: add stubs for ioremap and friends [ARM] nommu: avoid selecting TLB and CPU specific copy code [ARM] nommu: uaccess tweaks [ARM] nommu: adjust headers for !MMU ARM systems [ARM] nommu: we need the TLS register emulation for nommu mode
| * | | [ARM] nommu: remove fault-armv, mmap and mm-armv files from nommu buildRussell King2006-06-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove fault-armv.o, mmap.o and mm-armv.o from uclinux builds - these are concerned with MMU-ful operations, and as such are redundant for uclinux. Since this also removes iotable_init() and iotable_init() is used extensively in the platform support files, just make it a no-op. Based upon a couple of patches by Hyok. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [ARM] Remove TABLE_SIZE, and several unused function prototypesRussell King2006-06-281-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TABLE_SIZE is never used in arch/arm/mm/init.c. create_memmap_holes(), memtable_init, and setup_io_desc() no longer exist in the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [ARM] nommu: uaccess tweaksRussell King2006-06-281-52/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MMUless systems have only one address space for all threads, so both the usual access_ok() checks, and the exception handling do not make much sense. Hence, discard the fixup and exception tables at link time, use memcpy/memset for the user copy/clearing functions, and define the permission check macros to be constants. Some of this patch was derived from the equivalent patch by Hyok S. Choi. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [ARM] nommu: adjust headers for !MMU ARM systemsRussell King2006-06-2811-21/+287
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | [ARM] 3370/2: ep93xx: add crunch supportLennert Buytenhek2006-06-282-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek Add the necessary kernel bits for crunch task switching. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | [ARM] 3665/1: crunch: add ptrace supportLennert Buytenhek2006-06-281-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek This patch makes it possible to get/set a task's Crunch state via the ptrace(2) system call. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | [ARM] 3664/1: crunch: add signal frame save/restoreLennert Buytenhek2006-06-281-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek This patch makes the kernel save Crunch state in userland signal frames, so that any userland signal handler can safely use the Crunch coprocessor without corrupting the Crunch state of the code it preempted. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | [ARM] 3662/1: ixp23xx: don't include asm/hardware.h in uncompress.hLennert Buytenhek2006-06-283-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek ixp23xx was including asm/hardware.h in its version of uncompress.h, to get at the physical address of the debug UART, but this include was causing various inline functions that are totally unrelated to the decompressor, defined in headers in include/asm-arm/arch-ixp23xx, to be included in the decompressor image. Include asm/arch/ixp23xx.h instead, and move the sole inline function in ixp23xx.h to another header. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | [ARM] 3660/1: Remove legacy definesAndrew Victor2006-06-283-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor Remove the remaining legacy __virt_to_bus__is_a_macro and __bus_to_virt__is_a_macro defines in some ARM platforms. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | [ARM] 3661/1: S3C2412: Fix compilation if CPU_S3C2410 onlyBen Dooks2006-06-281-9/+7
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Ben Dooks If only the S3C2412 based machines are selected, then the regs-dsc.h does not export the S3C2412_DSC registers as it is wrapped in CONFIG_CPU_S3C2440. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud