summaryrefslogtreecommitdiffstats
path: root/fs
Commit message (Collapse)AuthorAgeFilesLines
* btrfs: replace EINVAL with ERANGE for resize when ULLONG_MAXGui Hecheng2014-06-091-1/+1
| | | | | | | | To be accurate about the error case, if the new size is beyond ULLONG_MAX, return ERANGE instead of EINVAL. Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix transaction leak during fsync callFilipe Manana2014-06-091-1/+3
| | | | | | | | | | | | If btrfs_log_dentry_safe() returns an error, we set ret to 1 and fall through with the goal of committing the transaction. However, in the case where the inode doesn't need a full sync, we would call btrfs_wait_ordered_range() against the target range for our inode, and if it returned an error, we would return without commiting or ending the transaction. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: Avoid trucating page or punching hole in a already existed hole.Qu Wenruo2014-06-091-14/+98
| | | | | | | | | | | | | btrfs_punch_hole() will truncate unaligned pages or punch hole on a already existed hole. This will cause unneeded zero page or holes splitting the original huge hole. This patch will skip already existed holes before any page truncating or hole punching. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: update commit root on snapshot creation after orphan cleanupFilipe Manana2014-06-091-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On snapshot creation (either writable or read-only), we do orphan cleanup against the root of the snapshot. If the cleanup did remove any orphans, then the current root node will be different from the commit root node until the next transaction commit happens. A send operation always uses the commit root of a snapshot - this means it will see the orphans if it starts computing the send stream before the next transaction commit happens (triggered by a timer or sync() for .e.g), which is when the commit root gets assigned a reference to current root, where the orphans are not visible anymore. The consequence of send seeing the orphans is explained below. For example: mkfs.btrfs -f /dev/sdd mount -o commit=999 /dev/sdd /mnt # open a file with O_TMPFILE and leave it open # write some data to the file btrfs subvolume snapshot -r /mnt /mnt/snap1 btrfs send /mnt/snap1 -f /tmp/send.data The send operation will fail with the following error: ERROR: send ioctl failed with -116: Stale file handle What happens here is that our snapshot has an orphan inode still visible through the commit root, that corresponds to the tmpfile. However send will attempt to call inode.c:btrfs_iget(), with the goal of reading the file's data, which will return -ESTALE because it will use the current root (and not the commit root) of the snapshot. Of course, there are other cases where we can get orphans, but this example using a tmpfile makes it much easier to reproduce the issue. Therefore on snapshot creation, after calling btrfs_orphan_cleanup, if the commit root is different from the current root, just commit the transaction associated with the snapshot's root (if it exists), so that a send will not see any orphans that don't exist anymore. This also guarantees a send will always see the same content regardless of whether a transaction commit happened already before the send was requested and after the orphan cleanup (meaning the commit root and current roots are the same) or it hasn't happened yet (commit and current roots are different). Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: ioctl, don't re-lock extent range when not necessaryFilipe Manana2014-06-091-2/+7
| | | | | | | | | | | | | | | | | In ioctl.c:lock_extent_range(), after locking our target range, the ordered extent that btrfs_lookup_first_ordered_extent() returns us may not overlap our target range at all. In this case we would just unlock our target range, wait for any new ordered extents that overlap the range to complete, lock again the range and repeat all these steps until we don't get any ordered extent and the delalloc flag isn't set in the io tree for our target range. Therefore just stop if we get an ordered extent that doesn't overlap our target range and the dealalloc flag isn't set for the range in the inode's io tree. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: avoid visiting all extent items when cloning a rangeFilipe Manana2014-06-091-4/+22
| | | | | | | | | | | When cloning a range of a file, we were visiting all the extent items in the btree that belong to our source inode. We don't need to visit those extent items that don't overlap the range we are cloning, as doing so only makes us waste time and do unnecessary btree navigations (btrfs_next_leaf) for inodes that have a large number of file extent items in the btree. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: set dead flag on the right root when destroying snapshotFilipe Manana2014-06-091-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | We were setting the BTRFS_ROOT_SUBVOL_DEAD flag on the root of the parent of our target snapshot, instead of setting it in the target snapshot's root. This is easy to observe by running the following scenario: mkfs.btrfs -f /dev/sdd mount /dev/sdd /mnt btrfs subvolume create /mnt/first_subvol btrfs subvolume snapshot -r /mnt /mnt/mysnap1 btrfs subvolume delete /mnt/first_subvol btrfs subvolume snapshot -r /mnt /mnt/mysnap2 btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/send.data The send command failed because the send ioctl returned -EPERM. A test case for xfstests follows. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: ensure readers see new data after a clone operationFilipe Manana2014-06-091-5/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We were cleaning the clone target file range from the page cache before we did replace the file extent items in the fs tree. This was racy, as right after cleaning the relevant range from the page cache and before replacing the file extent items, a read against that range could be performed by another task and populate again the page cache with stale data (stale after the cloning finishes). This would result in reads after the clone operation successfully finishes to get old data (and potentially for a very long time). Therefore evict the pages after replacing the file extent items, so that subsequent reads will always get the new data. Similarly, we were prone to races while cloning the file extent items because we weren't locking the target range and wait for any existing ordered extents against that range to complete. It was possible that after cloning the extent items, a write operation that was performed before the clone operation and overlaps the same range, would end up undoing all or part of the work the clone operation did (a worker task running inode.c:btrfs_finish_ordered_io). Therefore lock the target range in the io tree, wait for all pending ordered extents against that range to finish and then safely perform the cloning. The issue of reading stale data after the clone operation is easy to reproduce by running the following C program in a loop until it exits with return value 1. #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <errno.h> #include <pthread.h> #include <fcntl.h> #include <assert.h> #include <asm/types.h> #include <linux/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/ioctl.h> #define SRC_FILE "/mnt/sdd/foo" #define DST_FILE "/mnt/sdd/bar" #define FILE_SIZE (16 * 1024) #define PATTERN_SRC 'X' #define PATTERN_DST 'Y' struct btrfs_ioctl_clone_range_args { __s64 src_fd; __u64 src_offset, src_length; __u64 dest_offset; }; #define BTRFS_IOCTL_MAGIC 0x94 #define BTRFS_IOC_CLONE_RANGE _IOW(BTRFS_IOCTL_MAGIC, 13, \ struct btrfs_ioctl_clone_range_args) static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; static int clone_done = 0; static int reader_ready = 0; static int stale_data = 0; static void *reader_loop(void *arg) { char buf[4096], want_buf[4096]; memset(want_buf, PATTERN_SRC, 4096); pthread_mutex_lock(&mutex); reader_ready = 1; pthread_mutex_unlock(&mutex); while (1) { int done, fd, ret; fd = open(DST_FILE, O_RDONLY); assert(fd != -1); pthread_mutex_lock(&mutex); done = clone_done; pthread_mutex_unlock(&mutex); ret = read(fd, buf, 4096); assert(ret == 4096); close(fd); if (done) { ret = memcmp(buf, want_buf, 4096); if (ret == 0) { printf("Found new content\n"); } else { printf("Found old content\n"); pthread_mutex_lock(&mutex); stale_data = 1; pthread_mutex_unlock(&mutex); } break; } } return NULL; } int main(int argc, char *argv[]) { pthread_t reader; int ret, i, fd; struct btrfs_ioctl_clone_range_args clone_args; int fd1, fd2; ret = remove(SRC_FILE); if (ret == -1 && errno != ENOENT) { fprintf(stderr, "Error deleting src file: %s\n", strerror(errno)); return 1; } ret = remove(DST_FILE); if (ret == -1 && errno != ENOENT) { fprintf(stderr, "Error deleting dst file: %s\n", strerror(errno)); return 1; } fd = open(SRC_FILE, O_CREAT | O_WRONLY | O_TRUNC, S_IRWXU); assert(fd != -1); for (i = 0; i < FILE_SIZE; i++) { char c = PATTERN_SRC; ret = write(fd, &c, 1); assert(ret == 1); } close(fd); fd = open(DST_FILE, O_CREAT | O_WRONLY | O_TRUNC, S_IRWXU); assert(fd != -1); for (i = 0; i < FILE_SIZE; i++) { char c = PATTERN_DST; ret = write(fd, &c, 1); assert(ret == 1); } close(fd); sync(); ret = pthread_create(&reader, NULL, reader_loop, NULL); assert(ret == 0); while (1) { int r; pthread_mutex_lock(&mutex); r = reader_ready; pthread_mutex_unlock(&mutex); if (r) break; } fd1 = open(SRC_FILE, O_RDONLY); if (fd1 < 0) { fprintf(stderr, "Error open src file: %s\n", strerror(errno)); return 1; } fd2 = open(DST_FILE, O_RDWR); if (fd2 < 0) { fprintf(stderr, "Error open dst file: %s\n", strerror(errno)); return 1; } clone_args.src_fd = fd1; clone_args.src_offset = 0; clone_args.src_length = 4096; clone_args.dest_offset = 0; ret = ioctl(fd2, BTRFS_IOC_CLONE_RANGE, &clone_args); assert(ret == 0); close(fd1); close(fd2); pthread_mutex_lock(&mutex); clone_done = 1; pthread_mutex_unlock(&mutex); ret = pthread_join(reader, NULL); assert(ret == 0); pthread_mutex_lock(&mutex); ret = stale_data ? 1 : 0; pthread_mutex_unlock(&mutex); return ret; } Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* fs: btrfs: volumes.c: Fix for possible null pointer dereferenceRickard Strandqvist2014-06-091-2/+3
| | | | | | | | | There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: allocate raid type kobjects dynamicallyJeff Mahoney2014-06-093-16/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We are currently allocating space_info objects in an array when we allocate space_info. When a user does something like: # btrfs balance start -mconvert=raid1 -dconvert=raid1 /mnt # btrfs balance start -mconvert=single -dconvert=single /mnt -f # btrfs balance start -mconvert=raid1 -dconvert=raid1 / We can end up with memory corruption since the kobject hasn't been reinitialized properly and the name pointer was left set. The rationale behind allocating them statically was to avoid creating a separate kobject container that just contained the raid type. It used the index in the array to determine the index. Ultimately, though, this wastes more memory than it saves in all but the most complex scenarios and introduces kobject lifetime questions. This patch allocates the kobjects dynamically instead. Note that we also remove the kobject_get/put of the parent kobject since kobject_add and kobject_del do that internally. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: send, use the right limits for xattr names and valuesFilipe Manana2014-06-091-7/+23
| | | | | | | | | | | | | | | | We were limiting the sum of the xattr name and value lengths to PATH_MAX, which is not correct, specially on filesystems created with btrfs-progs v3.12 or higher, where the default leaf size is max(16384, PAGE_SIZE), or systems with page sizes larger than 4096 bytes. Xattrs have their own specific maximum name and value lengths, which depend on the leaf size, therefore use these limits to be able to send xattrs with sizes larger than PATH_MAX. A test case for xfstests follows. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: send, don't error in the presence of subvols/snapshotsFilipe Manana2014-06-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we are doing an incremental send and the base snapshot has a directory with name X that doesn't exist anymore in the second snapshot and a new subvolume/snapshot exists in the second snapshot that has the same name as the directory (name X), the incremental send would fail with -ENOENT error. This is because it attempts to lookup for an inode with a number matching the objectid of a root, which doesn't exist. Steps to reproduce: mkfs.btrfs -f /dev/sdd mount /dev/sdd /mnt mkdir /mnt/testdir btrfs subvolume snapshot -r /mnt /mnt/mysnap1 rmdir /mnt/testdir btrfs subvolume create /mnt/testdir btrfs subvolume snapshot -r /mnt /mnt/mysnap2 btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/send.data A test case for xfstests follows. Reported-by: Robert White <rwhite@pobox.com> Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: async delayed refsChris Mason2014-06-095-3/+107
| | | | | | | | | | | | Delayed extent operations are triggered during transaction commits. The goal is to queue up a healthly batch of changes to the extent allocation tree and run through them in bulk. This farms them off to async helper threads. The goal is to have the bulk of the delayed operations being done in the background, but this is also important to limit our stack footprint. Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: split up __extent_writepage to lower stack usageChris Mason2014-06-092-138/+194
| | | | | | | | | | | __extent_writepage has two unrelated parts. First it does the delayed allocation dance and second it does the mapping and IO for the page we're actually writing. This splits it up into those two parts so the stack from one doesn't impact the stack from the other. Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: Drop EXTENT_UPTODATE check in hole punching and direct lockingAlex Gartrell2014-06-093-7/+71
| | | | | | | | | | | | | | | In these instances, we are trying to determine if a page has been accessed since we began the operation for the sake of retry. This is easily accomplished by doing a gang lookup in the page mapping radix tree, and it saves us the dependency on the flag (so that we might eventually delete it). btrfs_page_exists_in_range borrows heavily from find_get_page, replacing the radix tree look up with a gang lookup of 1, so that we can find the next highest page >= index and see if it falls into our lock range. Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Alex Gartrell <agartrell@fb.com>
* Btrfs: cut down stack usage in btree_write_cache_pagesChris Mason2014-06-091-4/+5
| | | | | | | | This adds noinline_for_stack to two helpers used by btree_write_cache_pages. It shaves us down from 424 bytes on the stack to 280. Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: break up __btrfs_write_out_cache to cut down stack usageChris Mason2014-06-091-117/+191
| | | | | | | __btrfs_write_out_cache was one of our stack pigs. This breaks it up into helper functions and slims it down to 194 bytes. Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: free tmp ulist for qgroup rescanJosef Bacik2014-06-091-0/+1
| | | | | | | Memory leaks are bad mmkay? Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: usage error should not be logged into system logAnand Jain2014-06-091-4/+1
| | | | | | | | | | | | | I have an opinion that system logs /var/log/messages are valuable info to investigate the real system issues at the data center. People handling data center issues do spend a lot time and efforts analyzing messages files. Having usage error logged into /var/log/messages is something we should avoid. Signed-off-by: Anand Jain <Anand.Jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: remove newline from inode cache kthread nameDavid Sterba2014-06-091-1/+1
| | | | | Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: remove stale newlines from log messagesDavid Sterba2014-06-097-14/+14
| | | | | | | | I've noticed an extra line after "use no compression", but search revealed much more in messages of more critical levels and rare errors. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix double free in find_lock_delalloc_rangeChris Mason2014-06-091-0/+1
| | | | | | | | We need to NULL the cached_state after freeing it, otherwise we might free it again if find_delalloc_range doesn't find anything. Signed-off-by: Chris Mason <clm@fb.com> cc: stable@vger.kernel.org
* btrfs: replace simple_strtoull() with kstrtoull()ZhangZhen2014-06-091-2/+3
| | | | | | | | use the newer and more pleasant kstrtoull() to replace simple_strtoull(), because simple_strtoull() is marked for obsoletion. Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: set right total device count for seeding supportWang Shilong2014-06-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | | Seeding device support allows us to create a new filesystem based on existed filesystem. However newly created filesystem's @total_devices should include seed devices. This patch fix the following problem: # mkfs.btrfs -f /dev/sdb # btrfstune -S 1 /dev/sdb # mount /dev/sdb /mnt # btrfs device add -f /dev/sdc /mnt --->fs_devices->total_devices = 1 # umount /mnt # mount /dev/sdc /mnt --->fs_devices->total_devices = 2 This is because we record right @total_devices in superblock, but @fs_devices->total_devices is reset to be 0 in btrfs_prepare_sprout(). Fix this problem by not resetting @fs_devices->total_devices. Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: remove OPT_acl parse when acl disabledGuangliang Zhao2014-06-091-0/+7
| | | | | | | | | | | Even CONFIG_BTRFS_FS_POSIX_ACL is not defined, the acl still could been enabled using a mount option, and now fs/btrfs/acl.o is not built, so the mount options will appear to be supported but will be silently ignored. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: add sanity tests for new qgroup accounting codeJosef Bacik2014-06-0916-37/+700
| | | | | | | | | | | This exercises the various parts of the new qgroup accounting code. We do some basic stuff and do some things with the shared refs to make sure all that code works. I had to add a bunch of infrastructure because I needed to be able to insert items into a fake tree without having to do all the hard work myself, hopefully this will be usefull in the future. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: rework qgroup accountingJosef Bacik2014-06-0912-479/+1044
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: mark mapping with error flag to report errors to userspaceLiu Bo2014-06-091-0/+2
| | | | | | | | | | | According to commit 865ffef3797da2cac85b3354b5b6050dc9660978 (fs: fix fsync() error reporting), it's not stable to just check error pages because pages can be truncated or invalidated, we should also mark mapping with error flag so that a later fsync can catch the error. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix NULL pointer crash of deleting a seed deviceLiu Bo2014-06-091-4/+8
| | | | | | | | | | Same as normal devices, seed devices should be initialized with fs_info->dev_root as well, otherwise we'll get a NULL pointer crash. Cc: Chris Murphy <lists@colorremedies.com> Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix joining same transaction handle more than twiceWang Shilong2014-06-091-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We hit something like the following function call flows: |->run_delalloc_range() |->btrfs_join_transaction() |->cow_file_range() |->btrfs_join_transaction() |->find_free_extent() |->btrfs_join_transaction() Trace infomation can be seen as: [ 7411.127040] ------------[ cut here ]------------ [ 7411.127060] WARNING: CPU: 0 PID: 11557 at fs/btrfs/transaction.c:383 start_transaction+0x561/0x580 [btrfs]() [ 7411.127079] CPU: 0 PID: 11557 Comm: kworker/u8:9 Tainted: G O 3.13.0+ #4 [ 7411.127080] Hardware name: LENOVO QiTianM4350/ , BIOS F1KT52AUS 05/24/2013 [ 7411.127085] Workqueue: writeback bdi_writeback_workfn (flush-btrfs-5) [ 7411.127092] Call Trace: [ 7411.127097] [<ffffffff815b87b0>] dump_stack+0x45/0x56 [ 7411.127101] [<ffffffff81051ffd>] warn_slowpath_common+0x7d/0xa0 [ 7411.127102] [<ffffffff810520da>] warn_slowpath_null+0x1a/0x20 [ 7411.127109] [<ffffffffa0444fb1>] start_transaction+0x561/0x580 [btrfs] [ 7411.127115] [<ffffffffa0445027>] btrfs_join_transaction+0x17/0x20 [btrfs] [ 7411.127120] [<ffffffffa0431c91>] find_free_extent+0xa21/0xb50 [btrfs] [ 7411.127126] [<ffffffffa0431f68>] btrfs_reserve_extent+0xa8/0x1a0 [btrfs] [ 7411.127131] [<ffffffffa04322ce>] btrfs_alloc_free_block+0xee/0x440 [btrfs] [ 7411.127137] [<ffffffffa043bd6e>] ? btree_set_page_dirty+0xe/0x10 [btrfs] [ 7411.127142] [<ffffffffa041da51>] __btrfs_cow_block+0x121/0x530 [btrfs] [ 7411.127146] [<ffffffffa041dfff>] btrfs_cow_block+0x11f/0x1c0 [btrfs] [ 7411.127151] [<ffffffffa0421b74>] btrfs_search_slot+0x1d4/0x9c0 [btrfs] [ 7411.127157] [<ffffffffa0438567>] btrfs_lookup_file_extent+0x37/0x40 [btrfs] [ 7411.127163] [<ffffffffa0456bfc>] __btrfs_drop_extents+0x16c/0xd90 [btrfs] [ 7411.127169] [<ffffffffa0444ae3>] ? start_transaction+0x93/0x580 [btrfs] [ 7411.127171] [<ffffffff811663e2>] ? kmem_cache_alloc+0x132/0x140 [ 7411.127176] [<ffffffffa041cd9a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [ 7411.127182] [<ffffffffa044aa61>] cow_file_range_inline+0x181/0x2e0 [btrfs] [ 7411.127187] [<ffffffffa044aead>] cow_file_range+0x2ed/0x440 [btrfs] [ 7411.127194] [<ffffffffa0464d7f>] ? free_extent_buffer+0x4f/0xb0 [btrfs] [ 7411.127200] [<ffffffffa044b38f>] run_delalloc_nocow+0x38f/0xa60 [btrfs] [ 7411.127207] [<ffffffffa0461600>] ? test_range_bit+0x30/0x180 [btrfs] [ 7411.127212] [<ffffffffa044bd48>] run_delalloc_range+0x2e8/0x350 [btrfs] [ 7411.127219] [<ffffffffa04618f9>] ? find_lock_delalloc_range+0x1a9/0x1e0 [btrfs] [ 7411.127222] [<ffffffff812a1e71>] ? blk_queue_bio+0x2c1/0x330 [ 7411.127228] [<ffffffffa0462ad4>] __extent_writepage+0x2f4/0x760 [btrfs] Here we fix it by avoiding joining transaction again if we have held a transaction handle when allocating chunk in find_free_extent(). Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: use helpers for last_trans_log_full_commit instead of opencodeMiao Xie2014-06-094-27/+36
| | | | | | Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: check if items are ordered when a leaf is marked dirtyFilipe Manana2014-06-091-0/+6
| | | | | | | | | | | To ease finding bugs during development related to modifying btree leaves in such a way that it makes its items not sorted by key anymore. Since this is an expensive check, it's only enabled if CONFIG_BTRFS_FS_CHECK_INTEGRITY is set, which isn't meant to be enabled for regular users. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: don't access non-existent key when csum tree is emptyFilipe Manana2014-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the csum tree is empty, our leaf (path->nodes[0]) has a number of items equal to 0 and since btrfs_header_nritems() returns an unsigned integer (and so is our local nritems variable) the following comparison always evaluates to false: if (path->slots[0] >= nritems - 1) { As the casting rules lead to: if ((u32)0 >= (u32)4294967295) { This makes us access key at slot paths->slots[0] + 1 (1) of the empty leaf some lines below: btrfs_item_key_to_cpu(path->nodes[0], &found_key, slot); if (found_key.objectid != BTRFS_EXTENT_CSUM_OBJECTID || found_key.type != BTRFS_EXTENT_CSUM_KEY) { found_next = 1; goto insert; } So just don't access such non-existent slot and don't set found_next to 1 when the tree is empty. It's very unlikely we'll get a random key with the objectid and type values above, which is where we could go into trouble. If nritems is 0, just set found_next to 1 anyway as it will make us insert a csum item covering our whole extent (or the whole leaf) when the tree is empty. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: make sure there are not any read requests before stopping workersWang Shilong2014-06-091-0/+5
| | | | | | | | | | | | | | | | | | In close_ctree(), after we have stopped all workers,there maybe still some read requests(for example readahead) to submit and this *maybe* trigger an oops that user reported before: kernel BUG at fs/btrfs/async-thread.c:619! By hacking codes, i can reproduce this problem with one cpu available. We fix this potential problem by invalidating all btree inode pages before stopping all workers. Thanks to Miao for pointing out this problem. Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix possible memory leak in btrfs_create_tree()Tsutomu Itoh2014-06-091-0/+1
| | | | | | | | | In btrfs_create_tree(), if btrfs_insert_root() fails, we should free root->commit_root. Reported-by: Alex Lyakas <alex@zadarastorage.com> Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: remove useless ACL checkZhangZhen2014-06-091-7/+0
| | | | | | | | | posix_acl_xattr_set() already does the check, and it's the only way to feed in an ACL from userspace. So the check here is useless, remove it. Signed-off-by: zhang zhen <zhenzhang.zhang@huawei.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: btrfs_rm_device() should zero mirror SB as wellAnand Jain2014-06-091-0/+31
| | | | | | | | | | | | | | This fix will ensure all SB copies on the disk is zeroed when the disk is intentionally removed. This helps to better manage disks in the user land. This version of patch also merges the Zach patch as below. btrfs: don't double brelse on device rm Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Zach Brown <zab@redhat.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: use bitfield instead of integer data type for the some variants in ↵Miao Xie2014-06-0912-94/+109
| | | | | | | | btrfs_root Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: send, fix more issues related to directory renamesFilipe Manana2014-06-091-94/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a continuation of the previous changes titled: Btrfs: fix incremental send's decision to delay a dir move/rename Btrfs: part 2, fix incremental send's decision to delay a dir move/rename There's a few more cases where a directory rename/move must be delayed which was previously overlooked. If our immediate ancestor has a lower inode number than ours and it doesn't have a delayed rename/move operation associated to it, it doesn't mean there isn't any non-direct ancestor of our current inode that needs to be renamed/moved before our current inode (i.e. with a higher inode number than ours). So we can't stop the search if our immediate ancestor has a lower inode number than ours, we need to navigate the directory hierarchy upwards until we hit the root or: 1) find an ancestor with an higher inode number that was renamed/moved in the send root too (or already has a pending rename/move registered); 2) find an ancestor that is a new directory (higher inode number than ours and exists only in the send root). Reproducer for case 1) $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b $ mkdir -p /mnt/a/c/d $ mkdir /mnt/a/b/e $ mkdir /mnt/a/c/d/f $ mv /mnt/a/b /mnt/a/c/d/2b $ mkdir /mnt/a/x $ mkdir /mnt/a/y $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mv /mnt/a/x /mnt/a/y $ mv /mnt/a/c/d/2b/e /mnt/a/c/d/2b/2e $ mv /mnt/a/c/d /mnt/a/h/2d $ mv /mnt/a/c /mnt/a/h/2d/2b/2c $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send Simple reproducer for case 2) $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b $ mkdir /mnt/a/c $ mv /mnt/a/b /mnt/a/c/b2 $ mkdir /mnt/a/e $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mv /mnt/a/c/b2 /mnt/a/e/b3 $ mkdir /mnt/a/e/b3/f $ mkdir /mnt/a/h $ mv /mnt/a/c /mnt/a/e/b3/f/c2 $ mv /mnt/a/e /mnt/a/h/e2 $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send Another simple reproducer for case 2) $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b $ mkdir /mnt/a/c $ mkdir /mnt/a/b/d $ mkdir /mnt/a/c/e $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mkdir /mnt/a/b/d/f $ mkdir /mnt/a/b/g $ mv /mnt/a/c/e /mnt/a/b/g/e2 $ mv /mnt/a/c /mnt/a/b/d/f/c2 $ mv /mnt/a/b/d/f /mnt/a/b/g/e2/f2 $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send More complex reproducer for case 2) $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b $ mkdir -p /mnt/a/c/d $ mkdir /mnt/a/b/e $ mkdir /mnt/a/c/d/f $ mv /mnt/a/b /mnt/a/c/d/2b $ mkdir /mnt/a/x $ mkdir /mnt/a/y $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mv /mnt/a/x /mnt/a/y $ mv /mnt/a/c/d/2b/e /mnt/a/c/d/2b/2e $ mv /mnt/a/c/d /mnt/a/h/2d $ mv /mnt/a/c /mnt/a/h/2d/2b/2c $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send For both cases the incremental send would enter an infinite loop when building path strings. While solving these cases, this change also re-implements the code to detect when directory moves/renames should be delayed. Instead of dealing with several specific cases separately, it's now more generic handling all cases with a simple detection algorithm and if when applying a delayed move/rename there's a path loop detected, it further delays the move/rename registering a new ancestor inode as the dependency inode (so our rename happens after that ancestor is renamed). Tests for these cases is being added to xfstests too. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: send, remove dead code from __get_cur_name_and_parentFilipe Manana2014-06-091-6/+0
| | | | | Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: send, account for orphan directories when building path stringsFilipe Manana2014-06-091-24/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we have directories with a pending move/rename operation, we must take into account any orphan directories that got created before executing the pending move/rename. Those orphan directories are directories with an inode number higher then the current send progress and that don't exist in the parent snapshot, they are created before current progress reaches their inode number, with a generated name of the form oN-M-I and at the root of the filesystem tree, and later when progress matches their inode number, moved/renamed to their final location. Reproducer: $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b/c/d $ mkdir /mnt/a/b/e $ mv /mnt/a/b/c /mnt/a/b/e/CC $ mkdir /mnt/a/b/e/CC/d/f $ mkdir /mnt/a/g $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mkdir /mnt/a/g/h $ mv /mnt/a/b/e /mnt/a/g/h/EE $ mv /mnt/a/g/h/EE/CC/d /mnt/a/g/h/EE/DD $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send The second receive command failed with the following error: ERROR: rename a/b/e/CC/d -> o264-7-0/EE/DD failed. No such file or directory A test case for xfstests follows soon. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: send, avoid unnecessary inode item lookup in the btreeFilipe Manana2014-06-091-6/+7
| | | | | | | | | | Regardless of whether the caller is interested or not in knowing the inode's generation (dir_gen != NULL), get_first_ref always does a btree lookup to get the inode item. Avoid this useless lookup if dir_gen parameter is NULL (which is in some cases). Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: add dev maxs limit for __btrfs_alloc_chunk in kernel spaceGui Hecheng2014-06-091-0/+16
| | | | | | | | | | | For RAID0,5,6,10, For system chunk, there shouldn't be too many stripes to make a btrfs_chunk that exceeds BTRFS_SYSTEM_CHUNK_ARRAY_SIZE For data/meta chunk, there shouldn't be too many stripes to make a btrfs_chunk that exceeds a leaf. Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: fix wrong max system array size check in kernel spaceGui Hecheng2014-06-091-1/+2
| | | | | | | | | | For system chunk array, We copy a "disk_key" and an chunk item each time, so there should be enough space to hold both of them, not only the chunk item. Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: Add check to avoid cleanup roots already in fs_info->dead_roots.Qu Wenruo2014-06-091-7/+30
| | | | | | | | | | | | Current btrfs_orphan_cleanup will also cleanup roots which is already in fs_info->dead_roots without protection. This will have conditional race with fs_info->cleaner_kthread. This patch will use refs in root->root_item to detect roots in dead_roots and avoid conflicts. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: reclaim the reserved metadata space at backgroundMiao Xie2014-06-094-1/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before applying this patch, the task had to reclaim the metadata space by itself if the metadata space was not enough. And When the task started the space reclamation, all the other tasks which wanted to reserve the metadata space were blocked. At some cases, they would be blocked for a long time, it made the performance fluctuate wildly. So we introduce the background metadata space reclamation, when the space is about to be exhausted, we insert a reclaim work into the workqueue, the worker of the workqueue helps us to reclaim the reserved space at the background. By this way, the tasks needn't reclaim the space by themselves at most cases, and even if the tasks have to reclaim the space or are blocked for the space reclamation, they will get enough space more quickly. Here is my test result(Tested by compilebench): Memory: 2GB CPU: 2Cores * 1CPU Partition: 40GB(SSD) Test command: # compilebench -D <mnt> -m Without this patch: intial create total runs 30 avg 54.36 MB/s (user 0.52s sys 2.44s) compile total runs 30 avg 123.72 MB/s (user 0.13s sys 1.17s) read compiled tree total runs 3 avg 81.15 MB/s (user 0.74s sys 4.89s) delete compiled tree total runs 30 avg 5.32 seconds (user 0.35s sys 4.37s) With this patch: intial create total runs 30 avg 59.80 MB/s (user 0.52s sys 2.53s) compile total runs 30 avg 151.44 MB/s (user 0.13s sys 1.11s) read compiled tree total runs 3 avg 83.25 MB/s (user 0.76s sys 4.91s) delete compiled tree total runs 30 avg 5.29 seconds (user 0.34s sys 4.34s) Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: output warning instead of error when loading free space cache failedMiao Xie2014-06-091-2/+2
| | | | | | | | | | If we fail to load a free space cache, we can rebuild it from the extent tree, so it is not a serious error, we should not output a error message that would make the users uncomfortable. This patch uses warning message instead of it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: Add ctime/mtime update for btrfs device add/remove.Qu Wenruo2014-06-091-2/+24
| | | | | | | | | | | | | Btrfs will send uevent to udev inform the device change, but ctime/mtime for the block device inode is not udpated, which cause libblkid used by btrfs-progs unable to detect device change and use old cache, causing 'btrfs dev scan; btrfs dev rmove; btrfs dev scan' give an error message. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: assert that send is not in progres before root deletionDavid Sterba2014-06-092-13/+1
| | | | | | | CC: Miao Xie <miaox@cn.fujitsu.com> CC: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: protect snapshots from deleting during sendDavid Sterba2014-06-093-2/+53
| | | | | | | | | | | | | | | | | | | | | | | | The patch "Btrfs: fix protection between send and root deletion" (18f687d538449373c37c) does not actually prevent to delete the snapshot and just takes care during background cleaning, but this seems rather user unfriendly, this patch implements the idea presented in http://www.spinics.net/lists/linux-btrfs/msg30813.html - add an internal root_item flag to denote a dead root - check if the send_in_progress is set and refuse to delete, otherwise set the flag and proceed - check the flag in send similar to the btrfs_root_readonly checks, for all involved roots The root lookup in send via btrfs_read_fs_root_no_name will check if the root is really dead or not. If it is, ENOENT, aborted send. If it's alive, it's protected by send_in_progress, send can continue. CC: Miao Xie <miaox@cn.fujitsu.com> CC: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
OpenPOWER on IntegriCloud